scholarly journals Investigation of the Microstructure Evolution in a Fe-17Mn-1.5Al-0.3C Steel via In Situ Synchrotron X-ray Diffraction during a Tensile Test

Materials ◽  
2017 ◽  
Vol 10 (10) ◽  
pp. 1129 ◽  
Author(s):  
◽  
◽  
Keyword(s):  
Tensile Test ◽  
Microstructure Evolution ◽  
X Ray Diffraction ◽  
X Ray

scholarly journals Lattice Strain Evolutions in Ni-W Alloys during a Tensile Test Combined with Synchrotron X-ray Diffraction

Materials ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4027
Author(s):  
Tarik Sadat ◽  
Damien Faurie ◽  
Dominique Thiaudière ◽  
Cristian Mocuta ◽  
David Tingaud ◽  
...  
Keyword(s):  
Solid Solution ◽  
Tensile Test ◽  
Single Phase ◽  
Lattice Strain ◽  
Tensile Tests ◽  
X Ray Diffraction ◽  
X Ray ◽  
Significant Difference ◽  
Diffraction Peaks

Ni and Ni(W) solid solution of bulk Ni and Ni-W alloys (Ni-10W, Ni-30W, and Ni-50W) (wt%) were mechanically compared through the evolution of their {111} X-ray diffraction peaks during in situ tensile tests on the DiffAbs beamline at the Synchrotron SOLEIL. A significant difference in terms of strain heterogeneities and lattice strain evolution occurred as the plastic activity increased. Such differences are attributed to the number of brittle W clusters and the hardening due to the solid solution compared to the single-phase bulk Ni sample.

scholarly journals Observation of microstructure evolution during inertia friction welding using in-situ synchrotron X-ray diffraction

2021 ◽  
Vol 28 (3) ◽  
pp. 790-803
Author(s):  
Matthew Rowson ◽  
Chris J. Bennett ◽  
Mohammed A. Azeem ◽  
Oxana Magdysyuk ◽  
James Rouse ◽  
...  
Keyword(s):  
Microstructure Evolution ◽  
Friction Welding ◽  
Numerical Models ◽  
High Carbon Steel ◽  
Equilibrium Phase ◽  
Inertia Friction Welding ◽  
Contact Interface ◽  
X Ray Diffraction ◽  
X Ray

The widespread use and development of inertia friction welding is currently restricted by an incomplete understanding of the deformation mechanisms and microstructure evolution during the process. Understanding phase transformations and lattice strains during inertia friction welding is essential for the development of robust numerical models capable of determining optimized process parameters and reducing the requirement for costly experimental trials. A unique compact rig has been designed and used in-situ with a high-speed synchrotron X-ray diffraction instrument to investigate the microstructure evolution during inertia friction welding of a high-carbon steel (BS1407). At the contact interface, the transformation from ferrite to austenite was captured in great detail, allowing for analysis of the phase fractions during the process. Measurement of the thermal response of the weld reveals that the transformation to austenite occurs 230 °C below the equilibrium start temperature of 725 °C. It is concluded that the localization of large strains around the contact interface produced as the specimens deform assists this non-equilibrium phase transformation.

The Use of Advanced Analytical Techniques for Characterization of the Chemical, Physical, and Crystallographic Nature of a Surface

1973 ◽  
Vol 31 ◽  
pp. 132-133 ◽  
Author(s):  
R. E. Herfert
Keyword(s):  
Surface Characterization ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Depth Of Penetration ◽  
X Ray ◽  
The Past ◽  
Transmission Electron ◽  
Scanning Electron

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.

Sign in / Sign up

Export Citation Format

Share Document