scholarly journals Sensor Networks in Structural Health Monitoring: From Theory to Practice

2020 ◽  
Vol 9 (4) ◽  
pp. 47
Author(s):  
Vasilis Dertimanis ◽  
Eleni Chatzi
Keyword(s):  
Sensor Networks ◽  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Low Cost ◽  
Structural Health ◽  
Theory To Practice

The growing attention that structural health monitoring (SHM) has enjoyed in recent years can be attributed, amongst other factors, to the advent of low-cost and easily deployable sensors [...]

Decentralized NExT/ERA and RDT/ERA System Identification in Wireless Smart Sensor Networks

2012 ◽  
Vol 204-208 ◽  
pp. 4946-4951 ◽  
Author(s):  
Ding Yu Cui ◽  
Ke Gui Xin ◽  
Billie F. Spencer ◽  
Yu Fei Liu
Keyword(s):  
Sensor Networks ◽  
System Identification ◽  
Structural Health Monitoring ◽  
Power Consumption ◽  
Health Monitoring ◽  
Low Cost ◽  
Mode Shapes ◽  
Smart Sensor ◽  
Structural Health ◽  
Random Decrement Technique

Wireless smart sensor networks (WSSN) have many advances compared with traditional structural health monitoring (SHM) such as wireless process, real-time calculation and low cost. However power consumption is considered as one of the most limitations in this field. The unique features offered by decentralized data aggregation (DDA) technique with the potential to overcome power consumption enable implementation of the dense array of WSSN on large structures. This paper presents a system identification of a simply supported plate based on the random decrement technique (RDT) and natural excitation technique (NExT) in combination with eigensystem realization algorithm (ERA) using Illinois Structural Health Monitoring Project (ISHMP) Services Toolsuite. Finally the system parameters including natural frequency and mode shapes are in accordance with numerical simulation showing efficacy and feasibility of decentralized NExT/ERA and RDT/ERA system identification.

scholarly journals Advances in the Structural Health Monitoring of Bridges Using Piezoelectric Transducers

Sensors ◽  
2018 ◽  
Vol 18 (12) ◽  
pp. 4312 ◽  
Author(s):  
Yunzhu Chen ◽  
Xingwei Xue
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Piezoelectric Materials ◽  
Low Cost ◽  
Rapid Development ◽  
Concrete Strength ◽  
Steel Corrosion ◽  
Fast Response ◽  
Future Application ◽  
Structural Health

With the rapid development of the world’s transportation infrastructure, many long-span bridges were constructed in recent years, especially in China. However, these bridges are easily subjected to various damages due to dynamic loads (such as wind-, earthquake-, and vehicle-induced vibration) or environmental factors (such as corrosion). Therefore, structural health monitoring (SHM) is vital to guarantee the safety of bridges in their service lives. With its wide frequency response range, fast response, simple preparation process, ease of processing, low cost, and other advantages, the piezoelectric transducer is commonly employed for the SHM of bridges. This paper summarizes the application of piezoelectric materials for the SHM of bridges, including the monitoring of the concrete strength, bolt looseness, steel corrosion, and grouting density. For each problem, the application of piezoelectric materials in different research methods is described. The related data processing methods for four types of bridge detection are briefly summarized, and the principles of each method in practical application are listed. Finally, issues to be studied when using piezoelectric materials for monitoring are discussed, and future application prospects and development directions are presented.

scholarly journals Reliable Data Acquisition System for a Low-Cost Accelerograph Applied to Structural Health Monitoring

2020 ◽  
Vol 3 (2) ◽  
pp. 181-194
Author(s):  
Milton Muñoz ◽  
Remigio Guevara ◽  
Santiago González ◽  
Juan Carlos Jiménez
Keyword(s):  
Structural Health Monitoring ◽  
Data Acquisition ◽  
Health Monitoring ◽  
Seismic Event ◽  
Low Cost ◽  
Recording System ◽  
Continuous Recording ◽  
Remote Communication ◽  
Structural Health ◽  
Hydroelectric Dam

This paper presents and evaluates a continuous recording system designed for a low-cost seismic station. The architecture has three main blocks. An accelerometer sensor based on MEMS technology (Microelectromechanical Systems), an SBC platform (Single Board Computer) with embedded Linux and a microcontroller device. In particular, the microcontroller represents the central component which operates as an intermediate agent to manage the communication between the accelerometer and the SBC block. This strategy allows the system for data acquisition in real time. On the other hand, the SBC platform is used for storing and processing data as well as in order to configure the remote communication with the station. This proposal is intended as a robust solution for structural health monitoring (i.e. in order to characterize the response of an infrastructure before, during and after a seismic event). The paper details the communication scheme between the system components, which has been minutely designed to ensure the samples are collected without information loss. Furthermore, for the experimental evaluation the station was located in the facilities on a relevant infrastructure, specifically a hydroelectric dam. The system operation was compared and verified with respect to a certified accelerograph station. Results prove that the continuous recording system operates successfully and allows for detecting seismic events according to requirements of structural health applications (i.e. detects events with a frequency of vibration less than 100 Hz). Specifically, through the system implemented it was possible to characterize the effect of a seismic event of 4 MD reported by the regional seismology network and with epicenter located about 30 Km of the hydroelectric dam. Particularly, the vibration frequencies detected on the infrastructure are in the range of 13 Hz and 29 Hz. Regarding the station performance, results from experiments reveals an average CPU load of 51%, consequently the processes configured on the SBC platform do not involve an overload. Finally, the average energy consumption of the station is close to 2.4 W, therefore autonomy provided by the backup system is aroud of 10 hours.

scholarly journals Structural reliability assessment based on optical monitoring system: case study

2016 ◽  
Vol 9 (2) ◽  
pp. 297-305 ◽  
Author(s):  
E. Mesquita ◽  
P. Antunes ◽  
A. A. Henriques ◽  
A. Arêde ◽  
P. S. André ◽  
...  
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Structural Reliability ◽  
Extreme Values ◽  
Low Cost ◽  
Reliability Assessment ◽  
Water Reservoir ◽  
Optical Systems ◽  
Structural Health

ABSTRACT Optical systems are recognized to be an important tool for structural health monitoring, especially for real time safety assessment, due to simplified system configuration and low cost when compared to regular systems, namely electrical systems. This work aims to present a case study on structural health monitoring focused on reliability assessment and applying data collected by a simplified optical sensing system. This way, an elevated reinforced concrete water reservoir was instrumented with a bi-axial optical accelerometer and monitored since January 2014. Taking into account acceleration data, the natural frequencies and relative displacements were estimated. The reliability analysis was performed based on generalized extreme values distribution (GEV) and the results were employed to build a forecast of the reliability of the water elevated reservoir for the next 100 years. The results showed that the optical system combined with GEV analysis, implemented in this experimental work, can provide adequate data for structural reliability assessment.

Structural Health Monitoring With Piezoelectric Active Sensors

2000 ◽  
Author(s):  
Howard A. Winston ◽  
Fanping Sun ◽  
Balkrishna S. Annigeri
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Structural Damage ◽  
Electromechanical Coupling ◽  
Low Cost ◽  
Piezoelectric Element ◽  
Impedance Spectrum ◽  
Active Sensors ◽  
Electromechanical Impedance ◽  
Structural Health

A technology for non-intrusive real-time structural health monitoring using piezoelectric active sensors is presented. The approach is based on monitoring variations of the coupled electromechanical impedance of piezoelectric patches bonded to metallic structures in high-frequency bands. In each of these applications, a single piezoelectric element is used as both an actuator and a sensor. The resulting electromechanical coupling makes the frequency-dependent electric impedance spectrum of the PZT sensor a good mapping of the underlying structure’s acoustic signature. Moreover, incipient structural damage can be indicated by deviations of this signature from its original baseline pattern. Unique features of this technology include its high sensitivity to structural damage, non-intrusiveness to the host structure, and low cost of implementation. These features have potential for enabling on-board damage monitoring of critical or inaccessible aerospace structures and components, such as aircraft wing joints, and both internal and external jet engine components. Several exploratory applications will be discussed.

Sign in / Sign up

Export Citation Format

Share Document