scholarly journals Water Depth Variation Influence on the Mooring Line Design for FOWT within Shallow Water Region

2021 ◽  
Vol 9 (4) ◽  
pp. 409
Author(s):  
Wei-Hua Huang ◽  
Ray-Yeng Yang
Keyword(s):  
Wind Turbine ◽  
Water Depth ◽  
Return Period ◽  
Limit State ◽  
The Other ◽  
Ultimate Limit State ◽  
Mooring Lines ◽  
Floating Offshore Wind Turbines ◽  
Line Design ◽  
Water Depths

The objective of this paper was to present the modeling and optimization of mooring lines for floating offshore wind turbines (FOWT) located in various water depths from 50 m to 100 m in Taiwan western offshore areas. A semi-submersible floating wind turbine system is considered based on Offshore Code Comparison Collaborative Continuation (OC4) DeepCwind platform with the National Renewable Energy Laboratory (NREL) offshore 5-MW baseline wind turbine. The mooring lines proposed consist of a catenary mooring with studless chains. Three nominal sizes of the mooring chain links are taken into account with diameters of 95 mm, 115 mm and 135 mm. According to this configuration, a total of five mooring designs for different water depths (i.e., 50 m, 60 m, 70 m, 80 m, 100 m) are analyzed according to the rules and regulations of the two certification institutions, Det Norske Veritas (DNV) and American Petroleum Institute (API). Considering ultimate limit state (ULS), fatigue limit state (FLS) and maximum operating sea state (MOSS) based on a typhoon with a 50-year return period and current with a 10-year return period, 25-year design life, as well as 1-year return period, respectively, long-term predictions of breaking strength, fatigue and stability are performed. The software OrcaFlex version 10.3 d is used to simulate and design the mooring lines. The obtained results show that the shallow mooring design of 50 m water depth case presents the heaviest chains among the other water depths, increasing their mooring costs. On the other hand, the 100 m water design has much longer mooring lines, making this parameter the cost driving one. Thus, the minimum mooring cost range is from 60 m to 80 m water depth.

Design of Mooring Lines of Floating Offshore Wind Turbine in Jeju Offshore Area

2014 ◽  
Author(s):  
Hyungjun Kim ◽  
Joonmo Choung ◽  
Gi-Young Jeon
Keyword(s):  
Wind Turbine ◽  
Limit State ◽  
Design Procedure ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Ultimate Limit State ◽  
Mooring Lines ◽  
Offshore Area ◽  
Floating Offshore Wind Turbine ◽  
Wind Turbine System

This paper presents a mooring design procedure of a floating offshore wind turbine. The offshore environment data of Jeju south sea collected from Korea Hydrographic and Oceanographic Administration (KHOA) are used as environmental conditions for hydrodynamic analysis. A semi-submersible floating wind turbine system is considered based on Offshore Code Comparison Collaborative Continuation (OC4) DeepCWind platform and the National Renewable Energy Laboratory (NREL) 5MW class wind turbine. Catenary mooring with studless chain is chosen as the mooring system. Important design decisions such as how large the nominal sizes are, how long the mooring lines are, how far the anchor points are located, are demonstrated in detail. Considering ultimate limit state and fatigue limit state based on 100-year return period and 50 year design life, respectively, long-term predictions of breaking strength and fatigue are performed.

A Reliability-Based Comparative Study for Mooring Lines Design Criteria

2006 ◽  
Author(s):  
Alberto Omar Vazquez-Hernandez ◽  
Gilberto Bruno Ellwanger ◽  
Lui´s Volnei Sudati Sagrilo
Keyword(s):  
Return Period ◽  
Design Procedure ◽  
Mooring Line ◽  
Design Criteria ◽  
Mooring Lines ◽  
Load Effect ◽  
Extreme Response ◽  
Line Design ◽  
Water Depths

The characteristic load effect for the design of mooring systems can be defined by means of three procedures: 1) an extreme sea state with a given return period, 2) a set of sea states on a contour line associated to a return period or 3) extreme response (tension) statistics for a long-term period. This work presents the result of a reliability-based partial safety factor calibration study for a LRFD mooring line design criteria considering the three approaches mentioned above. The calibration exercise is applied to three FPSOs considering North Sea environmental conditions and different water depths: 200m, 800m and 3000m. The mooring systems investigated take into account lines made up of chains and polyester ropes. It is shown that the design procedure based on the long-term response, among all water depths investigated, is the one that presents less scattered reliability indices around the target level.

Coupled Dynamic Analysis for Multi-Unit Floating Offshore Wind Turbine in Maximum Operational and Survival Conditions

2015 ◽  
Author(s):  
H. K. Jang ◽  
H. C. Kim ◽  
M. H. Kim ◽  
K. H. Kim
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Time Domain ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Random Waves ◽  
Mooring Lines ◽  
Floating Offshore Wind Turbine ◽  
Coupled Dynamic Analysis ◽  
Floating Offshore Wind Turbines

Numerical tools for a single floating offshore wind turbine (FOWT) have been developed by a number of researchers, while the investigation of multi-unit floating offshore wind turbines (MUFOWT) has rarely been performed. Recently, a numerical simulator was developed by TAMU to analyze the coupled dynamics of MUFOWT including multi-rotor-floater-mooring coupled effects. In the present study, the behavior of MUFOWT in time domain is described through the comparison of two load cases in maximum operational and survival conditions. A semi-submersible floater with four 2MW wind turbines, moored by eight mooring lines is selected as an example. The combination of irregular random waves, steady currents and dynamic turbulent winds are applied as environmental loads. As a result, the global motion and kinetic responses of the system are assessed in time domain. Kane’s dynamic theory is employed to formulate the global coupled dynamic equation of the whole system. The coupling terms are carefully considered to address the interactions among multiple turbines. This newly developed tool will be helpful in the future to evaluate the performance of MUFOWT under diverse environmental scenarios. In the present study, the aerodynamic interactions among multiple turbines including wake/array effect are not considered due to the complexity and uncertainty.

Simulation Requirements and Relevant Load Conditions in the Design of Floating Offshore Wind Turbines

2018 ◽  
Author(s):  
Ricardo Faerron Guzmán ◽  
Kolja Müller ◽  
Luca Vita ◽  
Po Wen Cheng
Keyword(s):  
Wind Turbines ◽  
Limit State ◽  
Power Production ◽  
Offshore Wind ◽  
Ultimate Limit State ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines ◽  
Simulation Time ◽  
Number Of Seeds ◽  
Load Conditions

Aligned with work performed in deliverable D7.7 of the H2020 project LIFES50+, this study supports the definition of the numerical setup in the design of floating offshore wind turbines. The results of extensive simulation studies are presented, which focus particularly on determining the requirements for the load simulations in the design process. The analysis focusses on the cases of: (1) fatigue during power production and (2) ultimate loads during power production and severe sea state. For the fatigue load case, sensitivity study is performed in order to determine relevant load conditions and the expected impact of a variation in the environmental loading. Additionally, focus is put on the requirements regarding the run-in time, number of seeds and the simulation length for both fatigue and ultimate limit state (FLS, ULS) analysis. Another topic addressed is the benefit of using an increased number of seeds rather than extending the simulation time of single seeds, when a given total simulation time is required as described in the guidelines. The run-in time may be shortened when using predetermined steady states as initial conditions. Requirements for the steady state simulations are also determined and presented.

scholarly journals Proposal and Performance Study of a Novel Mooring System with Six Mooring Lines for Spar-Type Offshore Wind Turbines

2021 ◽  
Vol 11 (24) ◽  
pp. 11665
Author(s):  
Shi Liu ◽  
Yi Yang ◽  
Chao Wang ◽  
Yuangang Tu
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Offshore Wind ◽  
Irregular Waves ◽  
Offshore Wind Turbine ◽  
Mooring System ◽  
Mooring Lines ◽  
Included Angle ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines

Spar-type floating offshore wind turbines commonly vibrate excessively when under the coupling impact of wind and wave. The wind turbine vibration can be controlled by developing its mooring system. Thus, this study proposes a novel mooring system for the spar-type floating offshore wind turbine. The proposed mooring system has six mooring lines, which are divided into three groups, with two mooring lines in the same group being connected to the same fairlead. Subsequently, the effects of the included angle between the two mooring lines on the mooring-system’s performance are investigated. Then, these six mooring lines are connected to six independent fairleads for comparison. FAST is utilized to calculate wind turbine dynamic response. Wind turbine surge, pitch, and yaw movements are presented and analyzed in time and frequency domains to quantitatively evaluate the performances of the proposed mooring systems. Compared with the mooring system with six fairleads, the mooring system with three fairleads performed better. When the included angle was 40°, surge, pitch, and yaw movement amplitudes of the wind turbine reduced by 39.51%, 6.8%, and 12.34%, respectively, when under regular waves; they reduced by 56.08%, 25.00%, and 47.5%, respectively, when under irregular waves. Thus, the mooring system with three fairleads and 40° included angle is recommended.

scholarly journals A Comparative Study between Three-Legged and Tripod Sub-structures in Design of Offshore Wind Turbines in the Transition Water Depth

2018 ◽  
Vol 7 (3.36) ◽  
pp. 23
Author(s):  
Aliakbar Khosravi ◽  
Tuck Wai Yeong ◽  
Mohammed Parvez Anwar ◽  
Jayaprakash Jaganathana ◽  
Teck Leong Lau ◽  
...  
Keyword(s):  
Water Depth ◽  
Limit State ◽  
Cost Effective ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Ultimate Limit State ◽  
Offshore Wind Turbines ◽  
Welding Joints ◽  
Fatigue Limit State ◽  
Ultimate Limit

This research aimed at investigating tripod and three-legged offshore wind turbine substructures. A comparison between the two substructures based on their weight as well as the installation method of piles, i.e. pre-piling and post-piling, was carried out. The in-place (Ultimate Limit State), Dynamic, natural frequency check and fatigue (Fatigue Limit State) analyses were conducted considering aerodynamic and hydrodynamic loads imposed on substructures in 50m water depth. An optimisation process was carried out in order to reduce the mass of substructures. The results revealed that the three-legged substructure is more cost effective with 25% lesser structure mass. However, the construction of the three-legged structure usually takes more time due to increased number of members and subsequently welding joints. The results, furthermore, showed that the pre-piling method reduces the time and cost of offshore installation, and reduces the weight of piles by 50%.  

Interaction Between Mooring Line Damping and Response Frequency as a Result of Stiffness Alteration in Surge

2006 ◽  
Author(s):  
Lars Johanning ◽  
George H. Smith ◽  
Julian Wolfram
Keyword(s):  
Limit State ◽  
Extraction Process ◽  
Tidal Range ◽  
Mooring Line ◽  
System Response ◽  
Mooring Lines ◽  
Wave Basin ◽  
A Chain ◽  
Conversion Efficiencies ◽  
Line Design

The design and operation of a chain mooring for a wave energy converter (WEC) is considered. Experimental measurements of a mooring line were conducted in the Heriot-Watt University wave basin at a scale of 1:10. The laboratory procedures were designed to resemble tests undertaken earlier in the year at ‘full’ scale in 24 m water depth. This paper describes and compares these measurements and relates the results to earlier work on mooring lines by Webster [1]. Measurements of both the damping and response frequencies of the mooring are described. Although the present results support partly the conclusions of the earlier work, care must be taken in how these are applied when one is considering mooring line design for WECs. It is concluded that there are significant differences for a WEC for both operational and limit state design in comparison with a more conventional offshore system such as an FPSO or CALM. Although the primary requirement is still one of station-keeping two further considerations may be of great importance. Firstly if a ‘farm’ of devices is to be considered then limitations in sea space may necessitate that the devices be relatively densely packed. This will mean that the ‘footprint’ of the mooring should be constrained, to ensure that the moorings from each device do not interfere with one another and this will have great significance for the loading experienced by the line. This can be exacerbated by variations in tidal range which will have a larger effect in comparison with a conventional deepwater mooring. A second factor may arise if the mooring system response is critical to the WEC energy extraction process. If the mooring becomes part of the ‘tuned’ system then changes in the mooring properties of damping and natural frequency could seriously affect energy conversion efficiencies.

Influence of Mooring Lines and Risers on the Trim, Heel and Displacement on FPUs

2015 ◽  
Author(s):  
Cecília Coelho ◽  
Bruna Nabuco
Keyword(s):  
Water Depth ◽  
Mooring System ◽  
Mooring Lines ◽  
Different Types ◽  
Zero Degree ◽  
Displacement Based ◽  
System Configurations ◽  
And Behavior ◽  
Seabed Bathymetry ◽  
Water Depths

By monitoring the variation of weights of floating production units (FPUs), the sum of total weight computed by load calculators on board very often does not match the actual displacement based on the current drafts. Differences can also be observed in the trim and heel of FPUs, which present values different from zero degree in the calculations, but in fact they are frequently kept near zero by ballast control. The mooring lines and risers tensions are one of the most uncertain weight items in loading conditions reported by the crew on board, therefore, this paper aims to assess the influence and behavior of these systems to a variety of situations in which FPUs operate. Analyses were performed for semi-submersibles and FPSOs considering two configurations of mooring system: catenary and taut-leg. The purpose is to evaluate how the magnitude of the resulting force varies — and hence how the trim and heel change — for a range of offsets caused by environmental conditions. The effect of mooring lines and risers is also discussed regarding the water depth by means of case studies considering a range of water depths. Actual lines properties and seabed bathymetry from mooring system models of platforms located offshore Brazil have been taken as reference. In short, the mooring lines and risers loads will be calculated for different types of floating production units, mooring system configurations and water depths in order to evaluate their influence on the trim, heel and displacement of FPUs.

Evaluation of a Hybrid Representation to Model the Wind Turbine, Platform and Mooring Lines in the Analysis of Floating Offshore Wind Turbines

2021 ◽  
Author(s):  
Eloi Daniel de Araujo Neto ◽  
William Rodriguez ◽  
Fabr\xedcio Nogueira Corr\xeaa ◽  
Beatriz De Souza Leite Pires De Lima ◽  
Breno Pinheiro Jacob ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Offshore Wind ◽  
Mooring Lines ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines

Wind/Wave Misalignment Effects on Mooring Line Tensions for a Spar Buoy Wind Turbine

2018 ◽  
Author(s):  
Luigia Riefolo ◽  
Fernando del Jesus ◽  
Raúl Guanche García ◽  
Giuseppe Roberto Tomasicchio ◽  
Daniela Pantusa
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Wave ◽  
Offshore Wind ◽  
Mooring Line ◽  
Ultimate Limit State ◽  
International Electrotechnical Commission ◽  
Wave Loads ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines

The design methodology for mooring systems for a spar buoy wind turbine considers the influence of extreme events and wind/wave misalignments occurring in its lifetime. Therefore, the variety of wind and wave directions affects over the seakeeping and as a result the evaluation of the maxima loads acting on the spar-buoy wind turbine. In the present paper, the importance of wind/wave misalignments on the dynamic response of spar-type floating wind turbine [1] is investigated. Based on standards, International Electrotechnical Commission IEC and Det Norske Veritas DNV the design of position moorings should be carried out under extreme wind/wave loads, taking into account their misalignments with respect to the structure. In particular, DNV standard, in ‘Position mooring’ recommendations, specifies in the load cases definition, if site specific data is not available, to consider non-collinear environment to have wave towards the unit’s bow (0°) and wind 30° relative to the waves. In IEC standards, the misalignment of the wind and wave directions shall be considered to design offshore wind turbines and calculate the loads acting on the support structure. Ultimate Limit State (ULS) analyses of the OC3-Hywind spar buoy wind turbine are conducted through FAST code, a certified nonlinear aero-hydro-servo-elastic simulation tool by the National Renewable Energy Laboratory’s (NREL’s). This software was developed for use in the International Energy Agency (IEA) Offshore Code Comparison Collaborative (OC3) project, and supports NREL’s offshore 5-MW baseline turbine. In order to assess the effects of misaligned wind and wave, different wind directions are chosen, maintaining the wave loads perpendicular to the structure. Stochastic, full-fields, turbulence simulator Turbsim is used to simulate the 1-h turbulent wind field. The scope of the work is to investigate the effects of wind/wave misalignments on the station-keeping system of spar buoy wind turbine. Results are presented in terms of global maxima determined through mean up-crossing with moving average, which, then, are modelled by a Weibull distribution. Finally, extreme values are estimated depending on global maxima and fitted on Gumbel distribution. The Most Probable Maximum value of mooring line tensions is found to be influenced by the wind/wave misalignments. The present paper is organized as follows. Section ‘Introduction’, based on a literature study, gives useful information on the previous studies conducted on the wind/wave misalignments effects of floating offshore wind turbines. Section ‘Methodology’ describes the applied methodology and presents the spar buoy wind turbine, the used numerical model and the selected environmental conditions. Results and the corresponding discussion are given in Section ‘Results and discussion’ for each load case corresponding to the codirectional and misaligned wind and wave loads. Results are presented and discussed in time and frequency domains. Finally, in Section ‘Conclusion’ some conclusions are drawn.

Sign in / Sign up

Export Citation Format

Share Document