scholarly journals Experimental Study on the Impact of Water Content on the Strength Parameters of Coral Gravelly Sand

2020 ◽  
Vol 8 (9) ◽  
pp. 634
Author(s):  
Yang Wu ◽  
Xing Wang ◽  
Jian-Hua Shen ◽  
Jie Cui ◽  
Chang-Qi Zhu ◽  
...  
Keyword(s):  
Internal Friction ◽  
Water Content ◽  
Triaxial Compression ◽  
Friction Angle ◽  
Particle Breakage ◽  
Internal Friction Angle ◽  
Capillary Water ◽  
Strength Parameters ◽  
Apparent Cohesion ◽  
The Impact

The effect of capillary water caused by heavy rainfall and groundwater level fluctuations can induce the erosion and collapse of island reef coral sand foundations. Here, the effects of water content (ω) on the shear strength parameters of coral gravelly sand are analyzed at the macro and micro scales by laboratory consolidated-drained triaxial compression and nuclear magnetic resonance tests. Furthermore, particle breakage characteristics of coral gravelly sand under the static load are discussed. With increasing ω, (1) the internal friction angle increases slightly (<1°) then decreases; (2) the apparent cohesion is more sensitive to the change in the ω; (3) with an increase from 5.4% to 21.3%, the bound water content remains almost unchanged; (4) the capillary water content is the main factor impacting the apparent cohesion; (5) the increase in free water content is the internal cause of the decreasing internal friction angle of coral gravelly sand with ω > 11.1%; and (6) the particle breakage increases, and there is an approximately linear relationship between the median particle diameter (d50) and relative breakage index (Br). The established physical model can reflect the influence of water content and plastic work and describe the evolution law of particle breakage.

Study on the Effect of Water Content on Shearing Strength Parameters of Unsaturated Loess

2014 ◽  
Vol 638-640 ◽  
pp. 585-588 ◽  
Author(s):  
Si Zhong Qian
Keyword(s):  
Internal Friction ◽  
Water Content ◽  
Friction Angle ◽  
Internal Friction Angle ◽  
Direct Shear ◽  
Strength Parameters ◽  
Direct Shear Tests ◽  
Micro Particles ◽  
Shearing Strength ◽  
Unsaturated Loess

This paper experiments on typical Malan loess, performs consolidated quick direct shear tests under different water contents by conventional direct shear apparatus, then analyzes the effects of water content on shearing strength parameters, namely cohesion and internal friction angle. The results show that cohesion decreases linearly as the water content increasing, and the relation could be obtained by data fitting. However, internal friction angle keeps basically stable with the increase of water content. Finally, based on the force analysis for micro particles, the changing rules of cohesion and internal friction angle with water content were deeply explained.

Stability Analysis of the Cutting Slope Considering the Influence of Water Content of Soil

2012 ◽  
Vol 204-208 ◽  
pp. 115-118 ◽  
Author(s):  
Qiang Ma ◽  
Heng Lin Xiao ◽  
Qi Zhi Hu ◽  
Li Hua Li
Keyword(s):  
Internal Friction ◽  
Water Content ◽  
Friction Angle ◽  
Internal Friction Angle ◽  
Safety Factors ◽  
Strength Parameters ◽  
Direct Shear Tests ◽  
Cutting Slope ◽  
Influence Of Water ◽  
The Stability

Based on the method of strength reduction, numerical simulations were carried out to analyze the stability of the cutting slope. The direct shear tests of slope soil samples with different water content were carried out, and the safety factors of stability of the cutting slope were investigated with different cohesions and internal friction angles. At last, displacements and safety factors of stability of the slope with drains and without drains were calculated, and the observations of displacement of the cutting slope in field were also carried out. The results show that: The water content of the slope soil has great effects on the strength parameters, the cohesion and the internal friction angle decrease with the increase of the water content, and the effect is more significant on the cohesion than that on the internal friction angle. The safety factor of stability for the slope increases with the increase of the strength parameters, hence it increases with the decrease of the water content. The section of the slope without drains in the field is unstable, while the section with drains maintains stable.

Characterization of Shear Strength and Interface Friction of Organic Soil

2020 ◽  
Vol 857 ◽  
pp. 203-211
Author(s):  
Majid Hamed ◽  
Waleed S. Sidik ◽  
Hanifi Canakci ◽  
Fatih Celik ◽  
Romel N. Georgees
Keyword(s):  
Shear Stress ◽  
Shear Strength ◽  
Internal Friction ◽  
Moisture Content ◽  
Water Content ◽  
Friction Angle ◽  
Structural Materials ◽  
Organic Soil ◽  
Internal Friction Angle ◽  
Interface Friction

This study was undertaken to investigate some specific problems that limit a safe design and construction of structures on problematic soils. An experimental study was carried out to examine the influence of loading rate and moisture content on shear strength of organic soil. Influece of moisture content on interface friction between organic soil and structural materials was also attempted. A commonly used soil in Iraq was prepared at varying moisture contents of 39%, 57% and 75%. The experimental results showed that the increase in water content will decrease the shear stress and the internal friction angle. An increase of the shearing rate was found to decrease the shear stress and internal friction angle for all percetanges of water contents. Further, direct shear tests were carried out to detect the interface shear stress behavior between organic soil and structural materials. The results revealed that the increase in water content was shown to have significant negetavie effects on the interface internal friction and angle shear strength.

Stability Analysis of Dam Slope by Double Safety Factors of Dynamic Local Strength Reduction Method

2015 ◽  
Vol 744-746 ◽  
pp. 593-596
Author(s):  
Yuan Meng
Keyword(s):  
Internal Friction ◽  
Reduction Method ◽  
Failure Process ◽  
Friction Angle ◽  
Strength Reduction ◽  
Internal Friction Angle ◽  
Material Strength ◽  
Strength Reduction Method ◽  
Strength Parameters ◽  
Local Strength

When calculating the dam slope failure process, traditional strength reduction method doesn't consider the difference of decay rate between cohesion and internal friction angle and discount the strength parameters for all elements. This paper uses two different reduction factors for material strength parameters, slope cohesion and internal friction angle. Based on the yield approach index criterion, we change the reduction region in time and put forward a double safety factor of dynamic local strength reduction method for engineering analysis of dam slope stability.

scholarly journals Field Test Research on Red Clay Slope under Atmospheric Action

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Kaisheng Chen
Keyword(s):  
Internal Friction ◽  
Water Content ◽  
Pore Water ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Friction Angle ◽  
Internal Friction Angle ◽  
Red Clay ◽  
Failure Characteristics ◽  
Clay Slopes

By embedding water content sensors and pore water pressure sensors inside the red clay slope on-site in Guiyang, Guizhou, shear tests were performed on soil samples at different depths of the slope under different weather. The changes of water content, pore water pressure, and shear strength index of the slope inside the slope under the influence of the atmosphere were tracked and tested, and the failure characteristics and evolution of the red clay slope were analyzed. It is believed that the depth of influence of the atmosphere on red clay slopes is about 0.7 m, rainfall is the most direct climatic factor leading to the instability of red clay slopes, and the evaporation effect is an important prerequisite for the catastrophe of red clay slopes. The cohesion and internal friction angle of the slope soil have a good binary quadratic function relationship with the water content and density. The water content and density can be used to calculate the cohesion and internal friction angle. Failure characteristics of red clay slopes: the overall instability failure is less, mainly surface failure represented by gullies and weathering and spalling, and then gradually evolved into shallow instability failure represented by collapse and slump. The damage evolution law is as follows: splash corrosion and surface corrosion stage⟶ fracture development stage⟶ gully formation stage⟶ gully development through stage⟶ local collapse stage⟶ slope foot collapse stage.

scholarly journals Numerical Modelling of Soil Arching in a Shallow Backfill Layer

2015 ◽  
Vol 15 (4) ◽  
pp. 127-137 ◽  
Author(s):  
Waldemar St. Szajna
Keyword(s):  
Internal Friction ◽  
Flexible Structures ◽  
Friction Angle ◽  
Internal Friction Angle ◽  
Plasticity Condition ◽  
Flow Rule ◽  
The Finite Element Method ◽  
Soil Arching ◽  
Plain Strain ◽  
The Impact

Abstract The paper presents the application of the finite element method into the modelling of soil arching. The phenomenon plays fundamental role in soil-shell flexible structures behaviour. To evaluate the influence of arching on a pressure reduction, a plain strain trapdoor under a shallow layer of backfill was simulated. The Coulomb-Mohr plasticity condition and the nonassociated flow rule were used for the soil model. The research examines the impact of the internal friction angle and the influence of the backfill layer thickness on the value of soil arching. The carried out analyses indicate that the reduction of pressures acting on a structure depends on the value of the internal friction angle, which confirms the earlier research. For a shallow backfill layer however, the reduction is only a local phenomenon and can influence only a part of the structure.

Study on the Granular Shear Strength Parameters of Dumping Site

2012 ◽  
Vol 256-259 ◽  
pp. 358-361
Author(s):  
Xiang Yun Kong ◽  
Guang Jin Wang ◽  
Xiao Chao Zhou
Keyword(s):  
Particle Size ◽  
Grain Size ◽  
Shear Strength ◽  
Internal Friction ◽  
Friction Angle ◽  
Internal Friction Angle ◽  
Shear Strength Parameters ◽  
Strength Parameters ◽  
Dumping Site ◽  
Size Grading

Apparent particle size grading is the important characteristic of super-high bench dumping site, and the critical factors with the impact of its stability and disaster prevention are the fragmentation distribution and shear strength parameters of granular. With the copper mine dumping site which had the feature of apparent particle size grading, the thesis carried out the study of on-site particle size investigation and indoor laboratory. The particle-size distribution law with the changing of dumping-site height was analyzed and quantitative relationship between the fragmentation distribution and shear strength parameters of granular was discussed. The research results indicated that coarse-grain contents and maximum grain size were increased significantly according to the decreasing of dumping-site height, which showed that the dumping-site had the feature of apparent particle size grading. The coarse particle content in the grain size composition and internal friction angle φ of shear strength parameters increased with the obvious increment of the distribution value B. The relationship between distribution value B and the internal friction angle φ could be expressed by exponential function curve.

Experimental Study of Rockfill Particle Breakage

2014 ◽  
Vol 900 ◽  
pp. 445-448
Author(s):  
Zhi Hua Xu ◽  
Da Wei Sun
Keyword(s):  
Internal Friction ◽  
Large Scale ◽  
Reference Value ◽  
Friction Angle ◽  
Confining Pressure ◽  
Particle Breakage ◽  
Internal Friction Angle ◽  
Dam Construction ◽  
Confining Pressures ◽  
The Relationship

As the high concrete faced rockfill dams construction, grain breakage gradually become the factors that influence the high dam construction which can not be ignored. This text based on the master of rockfill of shuibuya dam as the experimental material, getting and analyzing the particle breakage data under different confining pressure through the large-scale triaxial test, and the results show that the particle breakage index increases with the increase of confining pressures. The relationship between particle breakage index and confining pressure can be expressed by formula;Particle breakage increase leading to reduced internal friction angle and the shear strength of rockfill, and the author newly introduced two broken variable to describe the relationship which can be expressed by the formula between the particle breakage and internal friction angle, it has certain reference value for establishing constitutive model considering particle breakage.

A Study on the Effects of Water Content on Strength Parameters of Landslide Soil

2012 ◽  
Vol 170-173 ◽  
pp. 785-788
Author(s):  
Jian Feng Qi ◽  
Xue Lin Song ◽  
Ji Chao Liu
Keyword(s):  
Internal Friction ◽  
Water Content ◽  
Yunnan Province ◽  
Turning Point ◽  
Friction Angle ◽  
Soil Samples ◽  
Plastic Limit ◽  
Strength Parameters ◽  
Geotechnical Tests ◽  
Slide Zone

Soil samples of slide body and slide zone are obtained to study the strength parameters from a landslide in Yunnan Province, China. Firstly, the basic physical properties of the two soil samples are measured. Then geotechnical tests are performed to study the variation law of strength parameters under different water content by using the automatic KTG triaxial shear apparatus. The results show that the cohesion of soils rapidly reduces with water content increasing, and slowly reduces when plastic limit attains, and it seems that a turning point appears at the location of plastic limit.The relation of cohesion with water content approximately conforms to the exponential function, and the relation of internal friction angle  with water content approximately conforms to the linear relation.

Seafloor Polymetallic Sulfides Mechanical Property Test

2014 ◽  
Vol 1015 ◽  
pp. 316-319
Author(s):  
Zhong Hua Huang ◽  
Shao Jun Liu ◽  
Ying Guang Xu ◽  
Wang Hu
Keyword(s):  
Compressive Strength ◽  
Internal Friction ◽  
Uniaxial Compressive Strength ◽  
Compression Strength ◽  
Triaxial Compression ◽  
Friction Angle ◽  
Internal Friction Angle ◽  
Test Method ◽  
Dry Density ◽  
Average Value

Seafloor polymetallic sulfide specimens were developed according to engineering rock test method standard (GB/T 50266-2013). Seafloor polymetallic sulfide wet density and dry density were tested. Uniaxial compressive strength and triaxial compression strength of seafloor polymetallic sulfide were tested using rock mechanics test system MTS 815. Elasticity modulus and Poisson's ratio of seafloor polymetallic sulfide were calculated based on specimens stress-strain curves. Cohesion and internal friction angle were calculated based on specimens triaxial test Mohr stress circle. Test results show that seafloor polymetallic sulfide dry density average value is 2.6 g/cm3, wet density average value is 2.94 g/cm3. Uniaxial compressive strength and triaxial compression strength of seafloor polymetallic sulfide are unstable. Average value of the uniaxial compressive strength is 10.243MPa. Average value of triaxial compression strength test peak load is 47.166KN. Cohesion is 2.447MPa and internal friction angle is 38.04o.

Sign in / Sign up

Export Citation Format

Share Document