scholarly journals Class II Skeletal Malocclusion and Prevalence of Temporomandibular Disorders. An Epidemiological Pilot Study on Growing Subjects

2021 ◽  
Vol 6 (3) ◽  
pp. 63
Author(s):  
Grazia Fichera ◽  
Vincenzo Ronsivalle ◽  
Simona Santonocito ◽  
Khaled S. Aboulazm ◽  
Gaetano Isola ◽  
...  
Keyword(s):  
Temporomandibular Disorders ◽  
Class Ii ◽  
Class I ◽  
Class Ii Malocclusion ◽  
Class Iii ◽  
Predisposing Factor ◽  
Skeletal Malocclusion ◽  
Skeletal Class Ii ◽  
Group A ◽  
Male Subjects

The purpose of our work is to evaluate the correlation between skeletal Class II malocclusion and temporomandibular disorders, by assessing potential different frequency scores compared with Class I and Class III skeletal malocclusion, and to evaluate associated etiological and risk factors. Fifty-five subjects were examined, 35 females and 20 males, with a mean age of 18 ± 1.3 years, divided into two groups: those with TMD and those without TMD, and prevalence was evaluated in the two groups of Class II subjects. Symptoms and more frequent signs were also examined in the TMD group. Regarding Group A (subjects with the presence of TMD), we found that 48% have a Class II, 16% have Class I, and 28% have Class III. In the totality of the group A sample, only 8% were male subjects. In Group B (subjects without TMD), we found that 40% were females, with 26.7% in Class I, 10% in Class II, and 3.3% in Class III; the male subjects in this group (60%) were distributed with 33.3% in Class I, 16.7% in Class II, and 10% in Class III. Class II malocclusion is not a causal factor of TMD but may be considered a predisposing factor.

scholarly journals Relationship between skeletal malocclusion and dental anomalies in Nepalese population

2019 ◽  
Vol 9 (1) ◽  
pp. 15-18
Author(s):  
Bashu Dev Pant ◽  
Anjana Rajbhandari ◽  
Resina Pradhan ◽  
Manju Bajracharya
Keyword(s):  
Third Molar ◽  
Class Ii ◽  
Class I ◽  
Class Ii Malocclusion ◽  
Class Iii ◽  
Dental Anomalies ◽  
Chi Square ◽  
Skeletal Class ◽  
Skeletal Malocclusion ◽  
Third Molar Agenesis

Introduction: Teeth eruption is important for the development of alveolar process which increases vertical height of the face and third molar is the last tooth to erupt in the oral cavity after birth. The aim of this study was to determine relationship between skeletal malocclusion and dental anomalies in Nepalese population. Materials & Method: A sample of 170 patients with agenesis of at least one third molar was divided into four groups according to the third-molar agenesis pattern. Panoramic radiographs, lateral cephalograph and cast models were used to determine the skeletal malocclusion and associated dental anomalies. The Pearson chi-square test was used for stastical analysis. Result: Among 170 patients more than half of the patients were female with the average age being 18.15 ± 3.64 years. Majority of the patients had Class I skeletal malocclusion followed by Class II and III but on group wise comparison of patients with different skeletal patterns Class I skeletal malocclusion had highest prevalence of dental anomalies followed by Class III and Class II malocclusion. Conclusion: Prevalence of third-molar agenesis was more in skeletal class I malocclusion followed by class II and III but skeletal Class I malocclusions had more dental anomalies followed by class III and class II malocclusion.

scholarly journals Pattern of Malocclusion in Orthodontic Patients in South-Eastern Region of Nepal

2017 ◽  
Vol 7 (1) ◽  
pp. 7-10 ◽  
Author(s):  
Anand Acharya ◽  
Bhushan Bhattarai ◽  
Diana George ◽  
Tarakant Bhagat
Keyword(s):  
Class Ii ◽  
Class I ◽  
Eastern Region ◽  
Class Iii ◽  
Skeletal Class ◽  
South Eastern ◽  
Skeletal Malocclusion ◽  
Skeletal Class Ii ◽  
Lateral Cephalograms ◽  
Orthodontic Patients

Introduction: Occlusal traits in orthodontic patients have been studied in different parts of Nepal. However, very few data are available on malocclusion in south-eastern region of Nepal.Objective: To assess the pattern of malocclusion occurring in orthodontic patients in south-eastern region of Nepal, and to estimate the age of presentation of Class II malocclusion among the patients.Materials & Method: Data were collected from 150 pre-treatment study models and lateral cephalograms from two orthodontic specialty clinics in Biratnagar. Angle’s classification system was used to determine dental malocclusion and ANB angle was used to determine skeletal malocclusion. Chi square test was used to test the association between dental and skeleton malocclusions.Result: Angle’s Class I malocclusion was found in 95(63.33%), Class II Div 1 in 41(27.33%), Class II Div 2 in 13(8.66%) and Class III in 1(0.66%). Among all subjects; 119 (79.33%) had skeletal Class I, 24(16%) had skeletal Class II and 7(4.66%) had skeletal Class III. There was significant association between dental and skeletal malocclusions. The average age for reporting Class II Div 1 malocclusion was 16.5 years and Class II Div 2 malocclusion was 19 years.Conclusion: Angle’s Class I is the most common malocclusion followed by Class II and Class III among orthodontic patients in south-eastern Nepal. The subjects lack awareness on age factor for orthodontic treatment. 

Genetic Polymorphisms in FGFR2 Underlie Skeletal Malocclusion

2019 ◽  
Vol 98 (12) ◽  
pp. 1340-1347 ◽  
Author(s):  
Q. Jiang ◽  
L. Mei ◽  
Y. Zou ◽  
Q. Ding ◽  
R.D. Cannon ◽  
...  
Keyword(s):  
Osteogenic Differentiation ◽  
Bone Growth ◽  
Class Ii ◽  
Class I ◽  
Class Iii ◽  
Mobility Shift ◽  
Skeletal Class ◽  
Skeletal Malocclusion ◽  
Skeletal Class Ii ◽  
The Common

Fibroblast growth factor receptor 2 ( FGFR2) in craniofacial bones mediates osteoprogenitor proliferation, differentiation, and apoptosis. The distortion of proper craniofacial bone growth may cause class II and class III skeletal malocclusion and result in compromised function and aesthetics. Here, we investigated the association between variations in FGFR2 and skeletal malocclusions. First, 895 subjects were included in a 2-stage case-control study with independent populations (stage 1: n = 138 class I, 111 class II, and 81 class III; stage 2: n = 279 class I, 187 class II, and 99 class III). Eight candidate single-nucleotide polymorphisms (SNPs) in FGFR2 were screened and validated. Five SNPs (rs2162540, rs2981578, rs1078806, rs11200014, and rs10736303) were found to be associated with skeletal malocclusions (all P < 0.05). That is, rs2162540 was significantly associated with skeletal class II malocclusion, while others were associated with skeletal class III malocclusion. Electrophoretic mobility shift assay and chromatin immunoprecipitation analysis showed that the common genotypes of rs2981578 and rs10736303 contained the binding sites of RUNX2 and SMAD4. Compared with the common genotypes, the minor genotypes at these 2 SNPs decreased the binding affinity and enhancer effect of RUNX2 and SMAD4, as well the levels of FGFR2 expression. In addition, FGFR2 expression contributed positively to osteogenic differentiation in vitro. Thus, we identified FGFR2 as a skeletal malocclusion risk gene, and FGFR2 polymorphisms regulated its transcriptional expression and then osteogenic differentiation.

scholarly journals Perbedaan ukuran sinus maksilaris pada maloklusi kelas I, II, dan III skeletal ditinjau dari radiografi sefalometriThe difference in the maxillary sinus size of skeletal class I, II, and III malocclusions in terms of cephalometric radiographs

2021 ◽  
Vol 33 (1) ◽  
pp. 53
Author(s):  
Brandon Thamran ◽  
Mimi Marina Lubis
Keyword(s):  
Maxillary Sinus ◽  
Class Ii ◽  
Class I ◽  
Class Iii ◽  
Skeletal Class ◽  
Skeletal Malocclusion ◽  
Skeletal Class Ii ◽  
Significant Difference ◽  
Males And Females ◽  
The Mean

Pendahuluan: Ukuran sinus maksilaris dapat dipengaruhi maloklusi skeletal, oleh karena itu pengetahuan dalam perkembangan dan ukuran sinus maksilaris penting dalam diagnosa dan menentukan rencana perawatan kasus maloklusi. Tujuan penelitian untuk menganalisis perbedaan rerata ukuran sinus maksilaris pada maloklusi kelas I, II, dan III skeletal pada laki-laki dan perempuan. Metode: Jenis penelitian Penelitian deskriptif analitik dilakukan pada 96 pasien RSGM USU usia 18-35 tahun dengan Teknik purposive sampling, terdiri dari 27 relasi rahang Kelas I, 31 Kelas II dan 22 Kelas III. Subjek  diperoleh melalui pengukuran metode Steiner. Hasil tracing dipindahkan melalui scanner dan  pengukuran luas Sinus Maksilaris dengan program AutoCAD. Hasil: Rerata sinus maksilaris Kelas I skeletal adalah 1492,18268,44 mm2  untuk laki-laki dan 1614,80259,13 mm2 untuk perempuan p=0,275, maka tidak ada perbedaan signifikan antara rerata sinus maksilaris Kelas I skeletal pada laki-laki dan perempuan, Kelas II skeletal adalah 1879,75 mm2 untuk laki-laki dan 1544,41239,47 mm2 untuk perempuan diperoleh p=0,016, maka terdapat perbedaan signifikan antara rerata  sinus maksilaris Kelas II skeletal pada laki-laki dan perempuan, dan Kelas III skeletal adalah 1619,36 mm2 untuk laki-laki dan 1489,92 mm2 untuk perempuan diperoleh p=0,239, maka tidak ada perbedaan signifikan antara rerata  sinus maksilaris  Kelas III skeletal pada laki-laki dan perempuan. Rerata ukuran antar kelompok didapatkan 1572,93 263,72 mm2  untuk Kelas I skeletal, 1609,32 mm2 untuk Kelas II skeletal, dan 1531,11 mm2 untuk Kelas III skeletal dengan p=0,600, Hasil ini menunjukkan tidak ada perbedaan rerata  sinus maksilaris pada maloklusi Kelas I, Kelas II dan Kelas III skeletal. Simpulan: Tidak ada perbedaan pada rerata ukuran sinus maksilaris pada maloklusi Kelas I, Kelas II dan Kelas III skeletal.Kata kunci: Ukuran sinus maksilaris, maloklusi skeletal, analisa Steiner, radiogram sefalometri. ABSTRACTIntroduction: Maxillary sinus size can be affected by skeletal malocclusion. Therefore knowledge of maxillary sinus development and size is essential in diagnosing and determining the treatment plan for malocclusion cases. This study was aimed to analyse the mean difference in maxillary sinus size in skeletal class I, II, and III malocclusions in males and females. Methods: This type of study was a descriptive-analytic study conducted on 96 patients at Universitas Sumatera Utara Dental Hospital aged 18-35 years with a purposive sampling technique, consisting of 27 Class I, 31 Class II and 22 Class III jaw relations. Subjects were obtained by measuring the Steiner method. The tracing results were transferred through a scanner and measuring the maxillary sinus area using the AutoCAD program. Results: The mean skeletal Class I maxillary sinus was 1492.18268.44 mm2 for men and 1614,80259.13 mm2 for women p = 0.275, so there was no significant difference between the mean skeletal Class I maxillary sinus in males and females. Class II skeletal is 1879.75 mm2 for men and 1544.41239.47 mm2 for women obtained p = 0.016. Hence, there is a significant difference between the mean skeletal Class II maxillary sinus in males and females, and skeletal Class III is 1619.36 mm2 for men and 1489.92 mm2 for women obtained p = 0.239, so there was no significant difference between the mean skeletal Class III maxillary sinus in males and females. The mean size between groups was 1572.93 263.72 mm2 for skeletal Class I, 1609.32 mm2 for skeletal Class II, and 1531.11 mm2 for skeletal Class III with p = 0.600. skeletal Class I, Class II and Class III malocclusions. Conclusion: There was no difference in mean maxillary sinus size in skeletal Class I, Class II and Class III malocclusions.Keywords: Maxillary sinus size, skeletal malocclusion, Steiner analysis, cephalometric radiograph.

scholarly journals Evaluation of Facial Esthetics using Golden Proportion Values in Dravidian Population for Different Classes of Malocclusions

2020 ◽  
Vol 11 (SPL4) ◽  
pp. 418-422
Author(s):  
Prasanna Arvind T R ◽  
Navaneethan Ramasamy ◽  
Sri Rengalakshmi
Keyword(s):  
Class Ii ◽  
Class I ◽  
Class Iii ◽  
Golden Proportion ◽  
Skeletal Class ◽  
Skeletal Malocclusion ◽  
Skeletal Class Ii ◽  
Facial Esthetics ◽  
Significant Difference ◽  
Facial Proportions

Improvement in esthetic appearance and functional occlusion are the pillars of contemporary orthodontic procedures. The aim of this study was to assess variations in facial proportions between skeletal classes I, II, III populations in order to establish objective departures from Golden Proportion norms. The study sample was divided into three groups based on the skeletal malocclusion, namely skeletal class I, class II and class III groups. Various markers were identified in these photographs in order to define facial symmetry and balance with the ideal values. Golden Proportion values were compared with that of the obtained results, and these values were checked for skeletal class I, II, III malocclusions. Our study showed a significant difference between skeletal class II and III malocclusions when correlated with Golden Proportion values. Skeletal Class I malocclusions showed a greater correlation with golden proportion values. Golden proportion ratios are more valid in cases of skeletal class I malocclusions. Hence, the objective of treating class II and class III malocclusions should be more focused on attaining values closer to the desired ratio for optimal facial balance and symmetry.

scholarly journals Glenoid fossa position in skeletal class-II malocclusion due to retrognathic mandible and skeletal class-I malocclusion in Pakistani population

2021 ◽  
Vol 12 (4) ◽  
Author(s):  
Rabia Tabassum ◽  
Nazish Amjad ◽  
Faiza Malik
Keyword(s):  
Class Ii ◽  
T Test ◽  
Class I ◽  
Diagnostic Feature ◽  
Class Ii Malocclusion ◽  
Glenoid Fossa ◽  
Skeletal Class ◽  
Skeletal Malocclusion ◽  
Skeletal Class Ii ◽  
Lateral Cephalograms

BACKGROUND & OBJECTIVE: Different dental and skeletal abnormalities interact with each other to cause multiple malocclusions of various areas of the dentofacial region. Association of the mandible and cranial base influence the malocclusions in anteroposterior and vertical dimensions that influences the evaluation of the skeletal components of a particular patient, so the relationship of glenoid fossa to adjacent craniofacial components must be taken into account. This research is conducted for the comparison of glenoid fossa position in subjects presenting with class II skeletal malocclusion due to retrognathic mandible and class I skeletal malocclusion. METHODOLOGY: Standardized lateral cephalograms of 130 patients were selected according to inclusion criteria from the orthodontic department. These radiographs were traced, and different angular and linear measurements were recorded. Then the position of glenoid fossa was compared in subjects of class II malocclusion with retrognathic mandible and class I malocclusion. SPSS version 17 was used for data analysis. Cephalometric measurements were analyzed, and glenoid fossa position was compared in both groups by using student’s t-test. Statistical level of significance using student t test was p< 0.05 RESULTS: Position of glenoid fossa in subjects with class II malocclusion is more distal and posterior as compared to the subjects with class I malocclusion. The effective parameters for the measurements of glenoid fossa are GF-S on FH, GF-Ptm on FH, and GF-FMN with p value 0.0001. CONCLUSION: A distally and posteriorly placed glenoid fossa is an important diagnostic feature of Class II skeletal malocclusion with the retrognathic mandible.  

scholarly journals Anatomical characteristics of mandibular bone in skeletal Class I, II and III patients by using cone beam computed tomography images in an iranian population

2021 ◽  
Vol 24 (2) ◽  
Author(s):  
Mohammad Zandi ◽  
Abbas Shokri ◽  
Vahid Mollabashi ◽  
Zahed Eghdami ◽  
Payam Amini
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Class Ii ◽  
Class I ◽  
Cone Beam ◽  
Class Iii ◽  
Anatomical Characteristics ◽  
Skeletal Class ◽  
Skeletal Class Ii ◽  
Ramus Height

Objetive: This study aimed to compare the anatomical characteristics of the mandible in patients with skeletal class I, II and class III disorders using cone beam computed tomography (CBCT). Material and Methods: CBCT scans of patients between 17 to 40 years taken with NewTom 3G CBCT system with 12-inch field of view (FOV) were selected from the archive. Lateral cephalograms were obtained from CBCT scans of patients, and type of skeletal malocclusion was determined (Class I, II or III). All CBCT scans were evaluated in the sagittal, coronal and axial planes using the N.N.T viewer software. Results: The ramus height and distance from the mandibular foramen to the sigmoid notch in class II patients were significantly different from those in skeletal class I (P < 0.005). Distance from the mandibular canal to the anterior border of ramus in class III individuals was significantly different from that in skeletal class I individuals (P < .005). Conclusion: Length of the body of mandible in skeletal class I was significantly different from that in skeletal class II and III patients. Also, ramus height in skeletal class I was significantly different from that in skeletal class II patients. CBCT had high efficacy for accurate identification of anatomical landmarks.   Keywords Prognathism; Retrognathism; Mandible; Anatomy; Cone beam computed tomography.

scholarly journals Relationship between skeletal Class II and Class III malocclusions with vertical skeletal pattern

2019 ◽  
Vol 24 (4) ◽  
pp. 63-72
Author(s):  
Sonia Patricia Plaza ◽  
Andreina Reimpell ◽  
Jaime Silva ◽  
Diana Montoya
Keyword(s):  
Class Ii ◽  
Class Ii Malocclusion ◽  
Class Iii ◽  
Class Iii Malocclusion ◽  
Multinomial Regression ◽  
Lateral Cephalogram ◽  
Cross Sectional ◽  
Skeletal Class ◽  
Skeletal Class Ii ◽  
Skeletal Pattern

ABSTRACT Objective: The purpose of this study was to establish the association between sagittal and vertical skeletal patterns and assess which cephalometric variables contribute to the possibility of developing skeletal Class II or Class III malocclusion. Methods: Cross-sectional study. The sample included pre-treatment lateral cephalogram radiographs from 548 subjects (325 female, 223 male) aged 18 to 66 years. Sagittal skeletal pattern was established by three different classification parameters (ANB angle, Wits and App-Bpp) and vertical skeletal pattern by SN-Mandibular plane angle. Cephalometric variables were measured using Dolphin software (Imaging and Management Solutions, Chatsworth, Calif, USA) by a previously calibrated operator. The statistical analysis was carried out with Chi-square test, ANOVA/Kruskal-Wallis test, and an ordinal multinomial regression model. Results: Evidence of association (p< 0.05) between sagittal and vertical skeletal patterns was found with a greater proportion of hyperdivergent skeletal pattern in Class II malocclusion using three parameters to assess the vertical pattern, and there was more prevalent hypodivergence in Class III malocclusion, considering ANB and App-Bpp measurements. Subjects with hyperdivergent skeletal pattern (odds ratio [OR]=1.85-3.65), maxillary prognathism (OR=2.67-24.88) and mandibular retrognathism (OR=2.57-22.65) had a significantly (p< 0.05) greater chance of developing skeletal Class II malocclusion. Meanwhile, subjects with maxillary retrognathism (OR=2.76-100.59) and mandibular prognathism (OR=5.92-21.50) had a significantly (p< 0.05) greater chance of developing skeletal Class III malocclusion. Conclusions: A relationship was found between Class II and Class III malocclusion with the vertical skeletal pattern. There is a tendency toward skeletal compensation with both vertical and sagittal malocclusions.

scholarly journals Outcome of Albumin Infusion in Heart Failure Patients

2019 ◽  
Vol 15 (2) ◽  
pp. 47-53
Author(s):  
Ashaduzzaman Talukder ◽  
Mohamed Mausool Siraj ◽  
Md Noornabi Khondokar ◽  
SM Ahsan Habib ◽  
Md Abu Salim ◽  
...  
Keyword(s):  
Heart Failure ◽  
Serum Albumin ◽  
Nyha Class ◽  
Class Ii ◽  
Class I ◽  
Class Iii ◽  
Albumin Infusion ◽  
Group A ◽  
Group B ◽  
Class Iv

Background: Heart Failure (HF) is a major public health burden worldwide. Approximately 5 million Americans, 0.4–2% of the general European population and over 23 million people worldwide are living with heart failure. Like few other chronic disease, low serum albumin is common in patients with heart failure (HF). However, very few studies evaluated the outcome of albumin infusion in different stages of HF. Therefore, the objective of this study is to assess the outcome of albumin infusion in heart failure patients. Methods: It was a cross-sectional study. A total of 50 cases of chronic heart failure with reduced ejection fraction and NYHA class III or IV with serum albumin level <2.5g/dl who were admitted in CCUwere selected by purposive sampling, from September 2017 to August 2018. 100ml of 20% albumin was infused and serum albumin was measured after 3 days. Then the patients were divided into two groups, Patients who failed to attain serum albumin of 3g/dl(Group A) or Patients who attained serum albumin of ≥3g/dl (Group B). Analysis and comparison for symptomatic improvement of heart failure by NHYA classification and LVEF was done at 10th day after infusion between group A and B. Result: Among the 50 patients, mean age of patients was 53.64 ± 13.44 years (age range: 26-84 years) with a male-female ratio of 3:2 (60%-male vs 40%- female). Majority patients were previously re-admitted at least two times (40%), 28% were re-admitted once, 16% were re-admitted three times and 4% were re-admitted for four times. Of all, 56% patients presented NYHA class IV and AHA stage D heart failure (56%) and 44% patients presented with NYHA class III and AHA stage C. At day 10 follow up following albumin infusion, overall frequency of following ten days of albumin therapy, in group B, 8 patients (72.7%) among Class III improved to Class I and 3 patients (27.3%) improved to class II. Also, 7 patients (50%), 5 patients (35.7%) and 2 patients (14.3%) among class IV improved to respectively class I, class II and class III. In group A, 3 patients (27.3%) among class III improve to class II and 8 patients (72.7%) remain in class III. Also, 2 patients (14.3%), 5 Patients (35.7%) and 7 patients (50%) among class IV improve to respectively class I, class II and class III. Moreover, statistically significant improvement was noted in ejection fraction of patents irrespective of initial class of heart failure (p<0.001) in group B patients compare to group A (p<0.09). Conclusion: In this study, the improvement of heart failure was more in patients who attained albumin level of ≥3g/dl.Therefore, in can be concluded that albumin infusion improves both subjective and objective improvement of patients with heart failure. University Heart Journal Vol. 15, No. 2, Jul 2019; 47-53

scholarly journals Validity of Index of Orthodontic Treatment Complexity in Assessing Complexity of Treatment among the Malocclusion Groups

2021 ◽  
Vol 10 (14) ◽  
pp. 1003-1007
Author(s):  
Sriman Vishnu ◽  
Saravanakumar Subranmanian ◽  
Prema Anbarasu ◽  
Nagappan Nagappan ◽  
Annamalai P.R. ◽  
...  
Keyword(s):  
Orthodontic Treatment ◽  
Predictor Variable ◽  
Correlation Coefficients ◽  
Class Ii ◽  
Class I ◽  
Class Ii Malocclusion ◽  
Class Iii ◽  
Division 1 ◽  
Treatment Complexity

BACKGROUND To provide efficient and well-planned orthodontic treatment orthodontists must be able to assess the type of malocclusion and the complexity involved in its treatment. Hence, the purpose of this study was to validate index of orthodontic treatment complexity (IOTC) as a reliable index to assess the treatment complexity in treating different malocclusion groups. METHODS A retrospective study with sample of 120 pairs of orthodontic study model consisting of treated and untreated cases, were collected and equally divided into class I, class II including both division 1 and division 2 and class III malocclusions based on Angles system of classification of malocclusion. Study casts were scored according to criteria given by the index of orthodontic treatment complexity and the degree of complexity is established for each of the malocclusion groups and the occlusal traits. RESULTS The Spearman correlation coefficients test shows that occlusal traits like overjet, centreline discrepancy, molar correction, overbite, crowding, posterior cross bite, alone significantly correlated with degree of complexity. Multiple regression analysis and one way ANOVA tests were performed for the three types of malocclusion and the test showed that in individual classes of malocclusion, the predictor variable (occlusal traits) significantly predicts the degree of complexity in class I and class II malocclusion cases, but not in class III. CONCLUSIONS Overjet, centreline discrepancy, molar correction, overbite, crowding, posterior cross bite correlated with degree of complexity. IOTC forecasts the degree of complexity in class I and class II malocclusion cases, but not in class III. KEY WORDS IOTC, Malocclusion, Occlusal Traits

Sign in / Sign up

Export Citation Format

Share Document