scholarly journals Controlled Release of 5-FU from Chi–DHA Nanoparticles Synthetized with Ionic Gelation Technique: Evaluation of Release Profile Kinetics and Cytotoxicity Effect

2020 ◽  
Vol 11 (3) ◽  
pp. 48
Author(s):  
Mariarosa Ruffo ◽  
Ortensia Ilaria Parisi ◽  
Francesco Patitucci ◽  
Marco Dattilo ◽  
Rocco Malivindi ◽  
...  
Keyword(s):  
Docosahexaenoic Acid ◽  
High Efficiency ◽  
Drug Loading ◽  
In Vitro Release ◽  
Release Profile ◽  
Order Kinetic ◽  
Ionic Gelation ◽  
Cytotoxicity Studies ◽  
Order Kinetic Model

The ionic gelation technique allows us to obtain nanoparticles able to function as carriers for hydrophobic anticancer drugs, such as 5-fluoruracil (5-FU). In this study, reticulated chitosan– docosahexaenoic acid (Chi–DHAr) nanoparticles were synthesized by using a chemical reaction between amine groups of chitosan (Chi) and carboxylic acids of docosahexaenoic acid (DHA) and the presence of a link between Chi and DHA was confirmed by FT-IR, while the size and morphology of the obtained Chi-DHAr nanoparticles was evaluated with dynamic light scattering (DLS) and scanning electron microscopy (SEM), respectively. Drug-loading content (DLC) and drug-loading efficiency (DLE) of 5-FU in Chi-DHAr nanoparticles were 33.74 ± 0.19% and 7.9 ± 0.26%, respectively, while in the non-functionalized nanoparticles (Chir + 5FU), DLC, and DLE were in the ranges of 23.73 ± 0.14%, 5.62%, and 0.23%, respectively. The in vitro release profile, performed in phosphate buffer saline (PBS, pH 7.4) at 37 °C, indicated that the synthetized Chi–DHAr nanoparticles provided a sustained release of 5-FU. Based on the obtained regression coefficient value (R2), the first order kinetic model provided the best fit for both Chir and Chi-DHAr nanoparticles. Finally, cytotoxicity studies of chitosan, 5-FU, Chir, Chir + 5-FU, Chi-DHAr, and Chi-DHAr + 5-FU nanoparticles were conducted. Overall, Chi-DHAr nanoparticles proved to be much more biocompatible than Chir nanoparticles while retaining the ability to release the drug with high efficiency, especially towards specific types of cancerous cells.

scholarly journals Porous Sulfonated PVA Microspheres for Controlled Molecules Delivery: A Methylene Blue Study

2021 ◽  
Vol 10 (1) ◽  
pp. 27-42
Author(s):  
M. G. Verón ◽  
L. A. Soria ◽  
M. O. Prado
Keyword(s):  
Methylene Blue ◽  
Suspension Polymerization ◽  
Drug Loading ◽  
In Vitro Release ◽  
Drug Carriers ◽  
Cytostatic Drug ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Model Drug

 Functionalized PVA microspheres are commonly used as drug carriers in the fields of pharmacy and medicine. With this aim, we obtained and test novel PVA-PVAc-AMPS sulfonated microspheres by free radical suspension polymerization of vinyl acetate (VAc) and 2-acrylamido-2-methyl-1-propanesulfonic sodium salt acid (AMPS), followed by saponification. The microspheres exhibited a porous core-shell structure with excellent sphericity, a mean size of 171 µm, and elasticity modulus comparable with commercial particles currently used in medical applications. Methylene blue (MB) which has shown similar adherence properties as the cytostatic drug doxorubicin was used as a model drug to study the drug loading/release characteristics of the sulfonated microspheres prepared in this work. 20.7 mg g-1 MB per gram of microspheres was the maximum adsorption capacity in two hours using UV-Vis absorption spectroscopy. The experimental data on adsorption were well described by the pseudo-second order kinetic model. The in vitro release profile of loaded MB microspheres showed rapid desorption in the first hour followed by slower MB release, reaching 8.6% elution at four hours. The diffusion process was found to be dominant in the MB desorption from the PVA-PVAc-AMPS microspheres.

Preparation and in vitro Evaluation of Bioadhesive Microparticulate System

1970 ◽  
Vol 1 (3) ◽  
pp. 257-266
Author(s):  
Nagda C. D. ◽  
Chotai N. P. ◽  
Patel S. B. ◽  
Soni T. J ◽  
Patel U. L
Keyword(s):  
Drug Loading ◽  
In Vitro Release ◽  
Phenyl Acetic Acid ◽  
Solvent Evaporation Method ◽  
Elimination Half ◽  
Release Studies ◽  
Differential Scanning Colorimetry ◽  
Polymer Interactions ◽  
Vitro Release

Aceclofenac (ACE) is NSAIDs of a phenyl acetic acid class. It is indicated in arthritis and osteoarthritis, rheumatoid arthritis, ankylosing spondylitis. It has short elimination half life of 4 hours. The objective of the study is to design, characterize and evaluate bioadhesive microspheres of ACE employing carbopol (CP) as bioadhesive polymer. Bioadhesive microspheres of ACE were prepared by solvent evaporation method. The prepared microspheres were free flowing and spherical in shape and characterized for drug loading, mucoadhesion test, infrared spectroscopy (IR), differential scanning colorimetry (DSC) and scanning electron microscopy (SEM). The in-vitro release studies were performed using pH 6.8 phosphate buffer. The drug loaded microspheres in a ratio of 1:5 showed 47% of drug entrapment; percentage mucoadhesion was 81% and 89% release in 10 h. The infrared spectra and DSC showed stable character of aceclofenac in the drug loaded microspheres and revealed the absence of drug-polymer interactions. SEM studies showed that the microspheres are spherical and porous in nature. The in vitro release profiles from microspheres of different polymer-drug ratios followed Higuchi model.

The Effect of Phase Transition Temperature on Therapeutic Efficacy of Liposomal Bortezomib

2020 ◽  
Vol 20 (6) ◽  
pp. 700-708
Author(s):  
Mitra Korani ◽  
Sara Nikoofal-Sahlabadi ◽  
Amin R. Nikpoor ◽  
Solmaz Ghaffari ◽  
Hossein Attar ◽  
...  
Keyword(s):  
Side Effects ◽  
Cell Line ◽  
Therapeutic Efficacy ◽  
Drug Loading ◽  
Particle Diameter ◽  
In Vitro Cytotoxicity ◽  
Liposomal Formulations ◽  
Cytotoxicity Studies ◽  
Anti Tumor Activity

Aims: Here, three liposomal formulations of DPPC/DPPG/Chol/DSPE-mPEG2000 (F1), DPPC/DPPG/Chol (F2) and HSPC/DPPG/Chol/DSPE-mPEG2000 (F3) encapsulating BTZ were prepared and characterized in terms of their size, surface charge, drug loading, and release profile. Mannitol was used as a trapping agent to entrap the BTZ inside the liposomal core. The cytotoxicity and anti-tumor activity of formulations were investigated in vitro and in vivo in mice bearing tumor. Background: Bortezomib (BTZ) is an FDA approved proteasome inhibitor for the treatment of mantle cell lymphoma and multiple myeloma. The low solubility of BTZ has been responsible for the several side effects and low therapeutic efficacy of the drug. Encapsulating BTZ in a nano drug delivery system; helps overcome such issues. Among NDDSs, liposomes are promising diagnostic and therapeutic delivery vehicles in cancer treatment. Objective: Evaluating anti-tumor activity of bortezomib liposomal formulations. Methods: Data prompted us to design and develop three different liposomal formulations of BTZ based on Tm parameter, which determines liposomal stiffness. DPPC (Tm 41°C) and HSPC (Tm 55°C) lipids were chosen as variables associated with liposome rigidity. In vitro cytotoxicity assay was then carried out for the three designed liposomal formulations on C26 and B16F0, which are the colon and melanoma cancer mouse-cell lines, respectively. NIH 3T3 mouse embryonic fibroblast cell line was also used as a normal cell line. The therapeutic efficacy of these formulations was further assessed in mice tumor models. Result: MBTZ were successfully encapsulated into all the three liposomal formulations with a high entrapment efficacy of 60, 64, and 84% for F1, F2, and F3, respectively. The findings showed that liposomes mean particle diameter ranged from 103.4 to 146.8nm. In vitro cytotoxicity studies showed that liposomal-BTZ formulations had higher IC50 value in comparison to free BTZ. F2-liposomes with DPPC, having lower Tm of 41°C, showed much higher anti-tumor efficacy in mice models of C26 and B16F0 tumors compared to F3-HSPC liposomes with a Tm of 55°C. F2 formulation also enhanced mice survival compared with untreated groups, either in BALB/c or in C57BL/6 mice. Conclusion: Our findings indicated that F2-DPPC-liposomal formulations prepared with Tm close to body temperature seem to be effective in reducing the side effects and increasing the therapeutic efficacy of BTZ and merits further investigation.

Development and In Vitro Characterization of Paclitaxel Loaded Solid Lipid Nanoparticles

2019 ◽  
Vol 9 (1) ◽  
pp. 76-85 ◽  
Author(s):  
R. Nithya ◽  
K. Siram ◽  
R. Hariprasad ◽  
H. Rahman
Keyword(s):  
Zeta Potential ◽  
Solid Lipid Nanoparticles ◽  
In Vitro Release ◽  
Lipid Nanoparticles ◽  
Release Profile ◽  
Mcf7 Cells ◽  
Solid Lipid ◽  
Cancerous Cells ◽  
Vitro Release

Background: Paclitaxel (PTX) is a potent anticancer drug which is highly effective against several cancers. Solid lipid nanoparticles (SLNs) loaded with anticancer drugs can enhance its toxicity against tumor cells at low concentrations. Objective: To develop and characterize SLNs of PTX (PSLN) to enhance its toxicity against cancerous cells. Method: The solubility of PTX was screened in various lipids. Solid lipid nanoparticles of PTX (PSLN) were developed by hot homogenization method using Cutina HR and Gelucire 44/14 as lipid carriers and Solutol HS 15 as a surfactant. PSLNs were characterized for size, morphology, zeta potential, entrapment efficiency, physical state of the drug and in vitro release profile in 7.4 pH phosphate buffer saline (PBS). The ability of PTX to enhance toxicity towards cancerous cells was tested by performing cytoxicity assay in MCF7 cell line. Results: Solubility studies of PTX in lipids indicated better solubility when Cutina HR and Gelucire 44/14 were used. PSLNs were found to possess a neutral zeta potential with a size range of 155.4 ± 10.7 nm to 641.9 ± 4.2 nm. In vitro release studies showed a sustained release profile for PSLN over a period of 48 hours. SLNs loaded with PTX were found to be more toxic in killing MCF7 cells at a lower concentration than the free PTX.

Preparation, evaluation, and in vitro release of chitosan-alginate tanshinone self-microemulsifying sustained-release microcapsules

2020 ◽  
pp. 1-9
Author(s):  
Yunhong Wang ◽  
Rong Hu ◽  
Yanlei Guo ◽  
Weihan Qin ◽  
Xiaomei Zhang ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Rate ◽  
Orthogonal Design ◽  
Drug Loading ◽  
In Vitro Release ◽  
Core Material ◽  
Evaluation Indexes ◽  
Vitro Release

OBJECTIVE: In this study we explore the method to prepare tanshinone self-microemulsifying sustained-release microcapsules using tanshinone self-microemulsion as the core material, and chitosan and alginate as capsule materials. METHODS: The optimal preparation technology of chitosan-alginate tanshinone self-microemulsifying sustained-release microcapsules was determined by using the orthogonal design experiment and single-factor analysis. The drug loading and entrapment rate were used as evaluation indexes to assess the quality of the drug, and the in vitro release rate was used to evaluate the drug release performance. RESULTS: The best technology of chitosan-alginate tanshinone self-microemulsifying sustained-release microcapsules is as follows: the concentration of alginate is 1.5%, the ratio of tanshinone self-microemulsion volume to alginate volume to chitosan mass is 1:1:0.5 (ml: ml: g), and the best concentration of calcium chloride is 2.0%. To prepare the microcapsules using this technology, the drug loading will be 0.046%, the entrapment rate will be 80.23%, and the 24-hour in vitro cumulative release rate will be 97.4%. CONCLUSION: The release of the microcapsules conforms to the Higuchi equation and the first-order drug release model and has a good sustained-release performance.

scholarly journals Development of Spanish Broom and Flax Dressings with Glycyrrhetinic Acid-Loaded Films for Wound Healing: Characterization and Evaluation of Biological Properties

Pharmaceutics ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1192
Author(s):  
Angela Abruzzo ◽  
Concettina Cappadone ◽  
Valentina Sallustio ◽  
Giovanna Picone ◽  
Martina Rossi ◽  
...  
Keyword(s):  
Wound Healing ◽  
Drug Loading ◽  
Healing Process ◽  
In Vitro Release ◽  
Sodium Hyaluronate ◽  
Biological Properties ◽  
Glycyrrhetinic Acid ◽  
Wound Dressings ◽  
Biological Studies

The selection of an appropriate dressing for each type of wound is a very important procedure for a faster and more accurate healing process. So, the aim of this study was to develop innovative Spanish Broom and flax wound dressings, as alternatives to cotton used as control, with polymeric films containing glycyrrhetinic acid (GA) to promote wound-exudate absorption and the healing process. The different wound dressings were prepared by a solvent casting method, and characterized in terms of drug loading, water uptake, and in vitro release. Moreover, biological studies were performed to evaluate their biocompatibility and wound-healing efficacy. Comparing the developed wound dressings, Spanish Broom dressings with GA-loaded sodium hyaluronate film had the best functional properties, in terms of hydration ability and GA release. Moreover, they showed a good biocompatibility, determining a moderate induction of cell proliferation and no cytotoxicity. In addition, the wound-healing test revealed that the Spanish Broom dressings promoted cell migration, further facilitating the closure of the wound.

scholarly journals Antimicrobial Properties and Release Profile of Ampicillin from Electrospun Poly(εepsilon;-caprolactone) Nanofiber Yarns

2010 ◽  
Vol 5 (4) ◽  
pp. 155892501000500 ◽  
Author(s):  
Hang Liu ◽  
Karen K. Leonas ◽  
Yiping Zhao
Keyword(s):  
In Vitro Release ◽  
Antimicrobial Properties ◽  
Fiber Surface ◽  
Electrospun Nanofibers ◽  
Release Profile ◽  
Burst Release ◽  
Spun Yarns ◽  
Surgical Sutures ◽  
Release Model

Poly(εepsilon;-caprolactone) (PCL) electrospun fibers containing ampicillin sodium salt have been produced and twisted into nanofiber yarns. The fiber diameters and crystallinity, the in vitro antimicrobial properties of the yarns, and the in vitro release of ampicillin from yarns containing various ampicillin concentrations are studied. Decreased fiber diameters and reduced diameter variation are observed with the addition of ampicillin salt into the polymer solution. The results from the zone of inhibition test of the yarns against both gram-positive Staphylococcus aureus and gram-negative Klebsiella pneumoniae indicate that the released ampicillin retains its effectiveness after the production processes, therefore the as-spun yarns are antimicrobial active. A burst release of ampicillin from the yarns has been observed in the first hour, and the release is almost completed in 96 hours. The burst release is believed to be due to the low compatibility of ampicillin with PCL, the accumulation of ampicillin on fiber surface and the small fiber diameters. An empirical release model is developed to describe the release profile. The results indicate that the electrospun nanofibers yarns will have a great potential to be used for biomaterials, such as surgical sutures, to decrease the surgical site infection rate.

Minocycline hydrochloride loaded mPEG-PCLA membranes: Preparation and in vitro evaluation for periodontitis therapy

2021 ◽  
pp. 088391152199279
Author(s):  
Ningtao Wang ◽  
Zhengmei Huang ◽  
Shenchun Wang ◽  
Meidong Lang ◽  
Xiuyin Zhang
Keyword(s):  
Drug Delivery ◽  
Drug Loading ◽  
Membrane Surface ◽  
Local Treatment ◽  
In Vitro Release ◽  
Periodontal Pathogen ◽  
Antibacterial Drug ◽  
Periodontal Ligament Fibroblasts ◽  
Minocycline Hydrochloride

This study was aimed at alleviating shortcomings in the treatment of periodontitis by preparation of a biopolymer membrane loaded with minocycline hydrochloride (MH) inserted into periodontal pockets to treat infections. Monomethoxy-poly (ethylene glycol)-poly (ε-caprolactone-co-L-lactide) (mPEG-PCLA) is a biocompatible and biodegradable amphiphilic block copolymer. It, therefore, has attracted considerable attention in drug delivery systems and periodontal treatment. We chose it as a membrane material for MH-drug loading. The MH-loaded membranes were prepared by the solvent casting technique with the content of 5, 8 and 10 wt.%, respectively. Fourier transform infrared spectra (FTIR) revealed no interaction between MH and polymer. The drug-loaded membrane surface morphology was investigated by scanning electron microscopy (SEM). In vitro release studies showed that the initial drug release exceeded 40% within 24 h, followed by a sustained release for up to 2 weeks, which would enable the therapeutic level to maintain over a longer time. The antibacterial activity studies in vitro demonstrated a positive effect on the periodontal pathogen. MH drug-loaded membranes have no adverse effect on the growth of periodontal ligament fibroblasts in the MTT test. The study suggests that mPEG-PCLA membranes containing MH are a potential antibacterial drug delivery system for local treatment of periodontitis.

Sign in / Sign up

Export Citation Format

Share Document