scholarly journals Electromagnetic Shielding Effectiveness of Glass Fiber/Epoxy Laminated Composites with Multi-Scale Reinforcements

2021 ◽  
Vol 5 (8) ◽  
pp. 204
Author(s):  
Nilufar Yesmin ◽  
Vijaya Chalivendra
Keyword(s):  
Glass Fiber ◽  
Carbon Fibers ◽  
Fe3o4 Nanoparticles ◽  
Electromagnetic Interference ◽  
Laminated Composites ◽  
Synergetic Effect ◽  
Thickness Direction ◽  
Shielding Effectiveness ◽  
Band Frequency ◽  
Emi Se

In this study, an experimental investigation has been performed to understand the electromagnetic interference-shielding effectiveness (EMI-SE) of glass fiber/epoxy laminated composites embedded with carbon nanotubes (CNTs) and Fe3O4 nanoparticles, reinforced with micro carbon fibers along the thickness direction. Micro carbon fibers were reinforced along the thickness direction between the laminates using an electro-flocking process and a vacuum infusion process used to fabricate the composites. The EMI-SE of the composites was measured in the X-band frequency range (8–12 GHz). The effect of carbon fibers of three different lengths (80 µm, 150 µm, and 350 µm) with two different fiber densities (1000 and 2000 fibers/mm2) and two different amounts of Fe3O4 nanoparticles (0.5 and 1 wt.%) on total SE, absorption, and reflection was investigated. Due to the synergetic effect of Fe3O4 nanoparticles, CNTs, and carbon fibers, the final EMI shielding of the composites was mainly dominated by the absorption process. The absorption was more pronounced in the composites of longer carbon fibers with improved electrical conductivity. The presence of Fe3O4 nanoparticles also enhanced total SE values with improved magnetic permeability. The composite with micro carbon fibers of 350 µm length and 2000 fibers/mm2 density with 1 wt.% of Fe3O4 nanoparticles showed the maximum value of total SE.

scholarly journals Interface Engineered Microcellular Magnetic Conductive Polyurethane Nanocomposite Foams for Electromagnetic Interference Shielding

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Guolong Sang ◽  
Pei Xu ◽  
Tong Yan ◽  
Vignesh Murugadoss ◽  
Nithesh Naik ◽  
...  
Keyword(s):  
Electromagnetic Interference ◽  
Magnetic Loss ◽  
Interfacial Polarization ◽  
Conductive Network ◽  
Shielding Effectiveness ◽  
Electromagnetic Interference Shielding ◽  
Multiple Reflections ◽  
Conduction Loss ◽  
Composite Foams ◽  
Emi Se

Abstract Lightweight microcellular polyurethane (TPU)/carbon nanotubes (CNTs)/ nickel-coated CNTs (Ni@CNTs)/polymerizable ionic liquid copolymer (PIL) composite foams are prepared by non-solvent induced phase separation (NIPS). CNTs and Ni@CNTs modified by PIL provide more heterogeneous nucleation sites and inhibit the aggregation and combination of microcellular structure. Compared with TPU/CNTs, the TPU/CNTs/PIL and TPU/CNTs/Ni@CNTs/PIL composite foams with smaller microcellular structures have a high electromagnetic interference shielding effectiveness (EMI SE). The evaporate time regulates the microcellular structure, improves the conductive network of composite foams and reduces the microcellular size, which strengthens the multiple reflections of electromagnetic wave. The TPU/10CNTs/10Ni@CNTs/PIL foam exhibits slightly higher SE values (69.9 dB) compared with TPU/20CNTs/PIL foam (53.3 dB). The highest specific EMI SE of TPU/20CNTs/PIL and TPU/10CNTs/10Ni@CNTs/PIL reaches up to 187.2 and 211.5 dB/(g cm−3), respectively. The polarization losses caused by interfacial polarization between TPU substrates and conductive fillers, conduction loss caused by conductive network of fillers and magnetic loss caused by Ni@CNT synergistically attenuate the microwave energy.

scholarly journals Ultrathin, Lightweight, and Flexible CNT Buckypaper Enhanced Using MXenes for Electromagnetic Interference Shielding

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Rongliang Yang ◽  
Xuchun Gui ◽  
Li Yao ◽  
Qingmei Hu ◽  
Leilei Yang ◽  
...  
Keyword(s):  
Electromagnetic Interference ◽  
High Performance ◽  
Electronic Devices ◽  
Deposition Process ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Emi Shielding Effectiveness ◽  
X Band ◽  
Wearable Electronic Devices ◽  
Emi Se

AbstractLightweight, flexibility, and low thickness are urgent requirements for next-generation high-performance electromagnetic interference (EMI) shielding materials for catering to the demand for smart and wearable electronic devices. Although several efforts have focused on constructing porous and flexible conductive films or aerogels, few studies have achieved a balance in terms of density, thickness, flexibility, and EMI shielding effectiveness (SE). Herein, an ultrathin, lightweight, and flexible carbon nanotube (CNT) buckypaper enhanced using MXenes (Ti3C2Tx) for high-performance EMI shielding is synthesized through a facile electrophoretic deposition process. The obtained Ti3C2Tx@CNT hybrid buckypaper exhibits an outstanding EMI SE of 60.5 dB in the X-band at 100 μm. The hybrid buckypaper with an MXene content of 49.4 wt% exhibits an EMI SE of 50.4 dB in the X-band with a thickness of only 15 μm, which is 105% higher than that of pristine CNT buckypaper. Furthermore, an average specific SE value of 5.7 × 104 dB cm2 g−1 is exhibited in the 5-μm hybrid buckypaper. Thus, this assembly process proves promising for the construction of ultrathin, flexible, and high-performance EMI shielding films for application in electronic devices and wireless communications.

scholarly journals Lightweight Cellulose/Carbon Fiber Composite Foam for Electromagnetic Interference (EMI) Shielding

Polymers ◽  
2018 ◽  
Vol 10 (12) ◽  
pp. 1319 ◽  
Author(s):  
Ran Li ◽  
Huiping Lin ◽  
Piao Lan ◽  
Jie Gao ◽  
Yan Huang ◽  
...  
Keyword(s):  
Carbon Fiber ◽  
Carbon Fibers ◽  
Electromagnetic Interference ◽  
Fiber Composite ◽  
Carbon Fiber Composites ◽  
Shielding Effectiveness ◽  
Electromagnetic Interference Shielding ◽  
Carbon Fiber Composite ◽  
Foaming Process ◽  
Long Carbon Fibers

Lightweight electromagnetic interference shielding cellulose foam/carbon fiber composites were prepared by blending cellulose foam solution with carbon fibers and then freeze drying. Two kinds of carbon fiber (diameter of 7 μm) with different lengths were used, short carbon fibers (SCF, L/D = 100) and long carbon fibers (LCF, L/D = 300). It was observed that SCFs and LCFs built efficient network structures during the foaming process. Furthermore, the foaming process significantly increased the specific electromagnetic interference shielding effectiveness from 10 to 60 dB. In addition, cellulose/carbon fiber composite foams possessed good mechanical properties and low thermal conductivity of 0.021–0.046 W/(m·K).

scholarly journals A Healable and Mechanically Enhanced Composite with Segregated Conductive Network Structure for High-Efficient Electromagnetic Interference Shielding

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Ting Wang ◽  
Wei-Wei Kong ◽  
Wan-Cheng Yu ◽  
Jie-Feng Gao ◽  
Kun Dai ◽  
...  
Keyword(s):  
Electromagnetic Interference ◽  
Diels Alder ◽  
Electrostatic Attraction ◽  
List Type ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Electromagnetic Interference Shielding ◽  
Elongation At Break ◽  
High Efficient ◽  
Emi Se

Highlights The cationic waterborne polyurethanes microspheres with Diels-Alder bonds were synthesized for the first time. The electrostatic attraction not only endows the composite with segregated structure to gain high electromagnetic-interference shielding effectiveness, but also greatly enhances mechanical properties. Efficient healing property was realized under heating environment. Abstract It is still challenging for conductive polymer composite-based electromagnetic interference (EMI) shielding materials to achieve long-term stability while maintaining high EMI shielding effectiveness (EMI SE), especially undergoing external mechanical stimuli, such as scratches or large deformations. Herein, an electrostatic assembly strategy is adopted to design a healable and segregated carbon nanotube (CNT)/graphene oxide (GO)/polyurethane (PU) composite with excellent and reliable EMI SE, even bearing complex mechanical condition. The negatively charged CNT/GO hybrid is facilely adsorbed on the surface of positively charged PU microsphere to motivate formation of segregated conductive networks in CNT/GO/PU composite, establishing a high EMI SE of 52.7 dB at only 10 wt% CNT/GO loading. The Diels–Alder bonds in PU microsphere endow the CNT/GO/PU composite suffering three cutting/healing cycles with EMI SE retention up to 90%. Additionally, the electrostatic attraction between CNT/GO hybrid and PU microsphere helps to strong interfacial bonding in the composite, resulting in high tensile strength of 43.1 MPa and elongation at break of 626%. The healing efficiency of elongation at break achieves 95% when the composite endured three cutting/healing cycles. This work demonstrates a novel strategy for developing segregated EMI shielding composite with healable features and excellent mechanical performance and shows great potential in the durable and high precision electrical instruments.

Electromagnetic interference shielding effectiveness of polypyrrole-silver nanocomposite films on silane-modified flexible sheet

2021 ◽  
pp. 095400832110645
Author(s):  
Karim Benzaoui ◽  
Achour Ales ◽  
Ahmed Mekki ◽  
Abdelhalim Zaoui ◽  
Boudjemaa Bouaouina ◽  
...  
Keyword(s):  
Surface Treatment ◽  
Electromagnetic Interference ◽  
Nanocomposite Films ◽  
Electrical Characteristics ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Electromagnetic Interference Shielding ◽  
Silver Nanocomposite ◽  
Electromagnetic Interference Shielding Effectiveness ◽  
Emi Se

The conventional electromagnetic interference (EMI) shielding materials are being gradually replaced by a new generation of supported conducting polymer composites (CPC) films due to their many advantages. This work presents a contribution on the effects of silane surface–modified flexible polypyrrole-silver nanocomposite films on the electromagnetic interference shielding effectiveness (EMI-SE). Thus, the UV-polymerization was used to in-situ deposit the PPy-Ag on the biaxial oriented polyethylene terephthalate (BOPET) flexible substrates whose surfaces were treated by 3-aminopropyltrimethoxysilane (APTMS). X-ray Photoelectron Spectroscopy (XPS) analyzes confirmed the APTMS grafting procedure. Structural, morphological, thermal, and electrical characteristics of the prepared films were correlated to the effect of substrate surface treatment. Thereafter, EMI-SE measurements of the elaborated films were carried out as per ASTM D4935 standard for a wide frequency band extending from 50 MHz to 18 GHz. The obtained results confirmed that the APTMS-treated BOPET film exhibit higher EMI shielding performance and better electrical characteristics compared to the untreated film. In fact, a 32% enhancement of EMI-SE was noted for the treated films compared to the untreated ones. Overall, these results put forward the role played by the surface treatment in strengthening the position of flexible PPy-Ag supported films as high-performance materials in electronic devices and electromagnetic interference shielding applications.

scholarly journals Robust Design of PC/ABS Filled with Nano Carbon Black for Electromagnetic Shielding Effectiveness and Surface Resistivity

Processes ◽  
2020 ◽  
Vol 8 (5) ◽  
pp. 616
Author(s):  
Wipoo Sriseubsai ◽  
Arsarin Tippayakraisorn ◽  
Jun Wei Lim
Keyword(s):  
Carbon Black ◽  
Electromagnetic Interference ◽  
Electrostatic Discharge ◽  
Acrylonitrile Butadiene Styrene ◽  
Surface Resistivity ◽  
Shielding Effectiveness ◽  
Electromagnetic Interference Shielding Effectiveness ◽  
Electromagnetic Shielding Effectiveness ◽  
Emi Se ◽  
Butadiene Styrene

This study focuses on the electromagnetic interference shielding effectiveness (EMI SE), dissipation of electrostatic discharge (ESD), and surface resistivity of polymer blends between polycarbonate (PC) and acrylonitrile–butadiene–styrene (ABS) filled with carbon black powder (CBp) and carbon black masterbatch (CBm). The mixtures of PC/ABS/CB composites were prepared by the injection molding for the 4-mm thickness of the specimen. The D-optimal mixture design was applied in this experiment. The EMI SE was measured at the frequency of 800 and 900 MHz with a network analyzer, MIL-STD-285. The result showed that the EMI SE was increased when the amount of filler increased. The surface resistivity of the composites was determined according to the ASTM D257. It was found that the surface resistivity of the plastic with no additives was 1012 Ω/ square. When the amount of fillers was added, the surface resistivity of plastic composites decreased to the range of 106–1011 Ω/square, which was suitable for the application without the electrostatic discharge. The optimization of multi-response showed using high amounts of PC and CB was the best mixture of this research.

CNT@PDMS/NW composite materials with superior electromagnetic shielding

Holzforschung ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Zi-Jing Zhou ◽  
Zhen-Xing Wang ◽  
Xiao-shuai Han ◽  
Jun-Wen Pu
Keyword(s):  
Electromagnetic Interference ◽  
Cellulose Nanofibers ◽  
Original Structure ◽  
Impregnation Method ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Band Frequency ◽  
Conductive Composites ◽  
Emi Shielding Effectiveness ◽  
Xrd Patterns

Abstract Lightweight materials with high electrical conductivity and hydrophobic mechanical properties are ideal materials for electromagnetic interference (EMI) shielding. Herein, the conductive composites with great EMI shielding effectiveness (SE) were successfully obtained by introducing multi-walled carbon nanotube (CNT) and polydimethylsiloxane (PDMS) based on the original structure of natural wood (NW). CNT@PDMS/NW composites were prepared via vacuum-pulse impregnation method and characterized by Fourier transform infrared (FTIR), scanning electron microscope (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) patterns, hydrophobicity analysis, and EMI shielding performance. As demonstrated, CNT nanosheets were successfully inserted into wood matrices, and hydrogen bonding between CNT nanosheets and cellulose nanofibers induced the fabrication of CNT@PDMS/NW composites. CNT@PDMS/NW composites exhibited excellent EMI SE values of 25.2 dB at the X-band frequency.

Tunable electromagnetic interference shielding ability of MXene/chitosan/silver nanowire sandwich films

2021 ◽  
pp. 2151041
Author(s):  
Wei Wang ◽  
Xiaoyu Bing ◽  
Yutong Zhou ◽  
Miaomiao Geng ◽  
Yanhu Zhan ◽  
...  
Keyword(s):  
Thin Films ◽  
Electromagnetic Interference ◽  
Hybrid Composites ◽  
Core Layer ◽  
Structure Design ◽  
Silver Nanowire ◽  
Shielding Effectiveness ◽  
Electromagnetic Interference Shielding ◽  
Electromagnetic Interference Shielding Effectiveness ◽  
Emi Se

The structural design of thin films is attracting attention in academia and industry in attempts to improve electromagnetic interference shielding effectiveness (EMI SE). In this study, MXene/chitosan/silver nanowire (AgNW) sandwich films, in which the AgNW core layer was bordered by two MXene/chitosan layers, were fabricated by vacuum-assisted filtration. Because of the interconnected AgNWs in the core layer and the aligned MXene sheets in the MXene/chitosan layers, the electrical conductivity of the sandwich film reached 11,459.1 S/m. Consequently, the sandwich film exhibited an SE value of 82.3 dB. What is more, when both the AgNW and MXene contents were 33.3%, the sandwich film’s EMI SE divided by its thickness was 26,167 dB/cm, which was much superior to the values reported for inorganic hybrid composites and polymer composites filled with hybrid fillers. Such a simple approach was proved to be an effective way for further structure design of thin films in EMI shielding field.

Microwave Irradiation of Graphene Aerogel and Its Use on the Electromagnetic Interference Shielding of BMI Nanocomposites

NANO ◽  
2020 ◽  
Vol 15 (11) ◽  
pp. 2050143
Author(s):  
Bowen Feng ◽  
Wei Li ◽  
Fei Xue ◽  
Xingyu Tong ◽  
Jiaying Li ◽  
...  
Keyword(s):  
Self Assembly ◽  
Electromagnetic Interference ◽  
Chemical Reduction ◽  
Three Dimensional ◽  
Microwave Treatment ◽  
Shielding Effectiveness ◽  
Electromagnetic Interference Shielding ◽  
Graphene Aerogels ◽  
Electromagnetic Interference Shielding Effectiveness ◽  
Emi Se

In this work, graphene aerogels (GAs) with three-dimensional interconnected networks were prepared by chemical reduction and self-assembly of graphene oxide sheets. After microwave treatment, obtained microwave reduced graphene aerogels (MRGAs) were used in the preparation of bismaleimide (BMI) composites. The results show that the microwave treatment significantly enhanced the quality of GAs, and the three-dimensional networks in the GAs were well retained. Moreover, the MRGAs were highly efficient in endowing BMI with high electrical conductivity and excellent electromagnetic interference shielding effectiveness (EMI SE). The conductivity of MRGA/BMI composites was 42–68% higher than that of GA/BMI composites. When the filler content is 1.6 wt.%, the EMI SE of MRGA/BMI composite was 32.3% higher than that of GA/BMI composite in the X band.

Sign in / Sign up

Export Citation Format

Share Document