scholarly journals Proof of Concept for Pultrusion Control by Cure Monitoring Using Resonant Ultrasound Spectroscopy

2020 ◽  
Vol 4 (3) ◽  
pp. 115
Author(s):  
Christian Pommer ◽  
Michael Sinapius
Keyword(s):  
Best Practice ◽  
Low Cost ◽  
Injection Pressure ◽  
Ultrasonic Spectroscopy ◽  
Pultrusion Process ◽  
Cure Monitoring ◽  
Machine Productivity ◽  
On Line ◽  
Resonant Ultrasound ◽  
Increasing Demand

The increasing demand for low cost consistent quality composite materials, especially of the automotive industry, creates the necessity for fast high quality processes. Pultrusion is one of the processes that can fulfill this demand. While the process is highly automated, manufacturing parameters still have to be chosen manually. The choice of line speed, mould temperature and injection pressure is based on best practice and therefore requires manual optimization that results in cost intensive manufacturing errors and suboptimal machine productivity. This paper presents a possible solution for this problem by providing an on-line cure monitoring approach that allows to overcome this challenge. Resonant Ultrasonic Spectroscopy (RUS) shows a high potential for in-line cure monitoring inside the pultrusion tool. RUS has been adapted for the first time in a pultrusion process. This paper focuses on the successful application of this technique to control the pultrusion process based on the state of cure of the material inside of the tool. As one of the only techniques for in-line cure monitoring which can be used continuously in closed tools despite high abrasion, it provides a new insight into the pultrusion process.

Design of On-Line Detection System for Paper Defects Based on Line-Scan Camera

2014 ◽  
Vol 536-537 ◽  
pp. 268-271
Author(s):  
Ping He ◽  
Chao Liu ◽  
Meng Wang ◽  
Sheng Mei Cao
Keyword(s):  
High Efficiency ◽  
Detection System ◽  
Low Cost ◽  
Digital Camera ◽  
Line Detection ◽  
Detection Scheme ◽  
Line Scan ◽  
On Line ◽  
Increasing Demand ◽  
Technology Level

Paper defects mean that there are some defects in the paper such as hole, emboss, and fold during the paper production, which mainly results from the limitation of technological level. In the past time, artificial visual inspection and off-line checking were often used to detect the paper defects. However, its shortcoming was highlighted along with the improvement of industrial technology level and increasing demand for paper. In order to realize the online detection and markers for paper defects, the project designs the on-line detection system based on line-scan digital camera. Firstly, the principle and detection scheme of the system for the paper defects was presented. Then the overall structure of the system was designed. After that, the hardware circuit of the system was designed using TMS320F2812 as main control chip. It mainly consists of the function of each module and the working process of the system. Finally, the software of the image acquisition system was presented. With the experimental verification, the system has advantages of low cost, high efficiency and strong resistance to interference. The functions and indexes achieved the design requirements.

scholarly journals Synthesis, Structure and Diffusion Pathways of Fast Lithium-Ion Conductors in the Polymorphs α- and β-Li8SnP4

2021 ◽  
Author(s):  
Thomas F Fässler ◽  
Stefan Strangmüller ◽  
Henrik Eickkhoff ◽  
Wilhelm Klein ◽  
Gabriele Raudaschl-Sieber ◽  
...  
Keyword(s):  
High Performance ◽  
Low Cost ◽  
Lithium Ion ◽  
Conducting Materials ◽  
Increasing Demand ◽  
Battery Technology ◽  
Lithium Ion Conductors ◽  
And Diffusion ◽  
Ion Conductors

The increasing demand for a high-performance and low-cost battery technology promotes the search for Li+-conducting materials. Recently, phosphidotetrelates and aluminates were introduced as an innovative class of phosphide-based Li+-conducting materials...

scholarly journals Immobilization of Pseudomonas aeruginosa static biomass on eggshell powder for on-line preconcentration and determination of Cr (VI)

2020 ◽  
Vol 18 (1) ◽  
pp. 303-313 ◽  
Author(s):  
Aamir Rasheed ◽  
Tahseen Ghous ◽  
Sumaira Mumtaz ◽  
Muhammad Nadeem Zafar ◽  
Kalsoom Akhter ◽  
...  
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Low Cost ◽  
Colorimetric Detection ◽  
Time Flow ◽  
Highly Sensitive ◽  
Glass Column ◽  
On Line ◽  
Preconcentration Time ◽  
Ultra Trace

AbstractIn the present work, a novel continuous flow system (CFS) is developed for the preconcentration and determination of Cr (VI) using Pseudomonas aeruginosa static biomass immobilized onto an effective and low-cost solid support of powdered eggshells. A mini glass column packed with the immobilized biosorbent is incorporated in a CFS for the preconcentration and determination of Cr (VI) from aqueous solutions. The method is based on preconcentration, washing and elution steps followed by colorimetric detection with 1,5-diphenyl carbazide in sulphuric acid. The effects of several variables such as pH, retention time, flow rate, eluent concentration and loaded volume are studied. Under optimal conditions, the CFS method has a linear range between 10 and 100 μg L-1 and a detection limit of 6.25 μg L-1 for the determination of Cr (VI). The sampling frequency is 10 samples per hour with a preconcentration time of 5 mins. Furthermore, after washing with a 0.1 M buffer (pH 3.0), the activity of the biosorbent is regenerated and remained comparable for more than 200 cycles. Scanning electron microscopy reveals a successful immobilization of biomass on eggshells powder and precipitation of Cr (VI) on the bacterial cell surface. The proposed method proves highly sensitive and could be suitable for the determination of Cr (VI) at an ultra-trace level.

Voice In Ear

2021 ◽  
Vol 5 (1) ◽  
pp. 1-25
Author(s):  
Yang Gao ◽  
Yincheng Jin ◽  
Jagmohan Chauhan ◽  
Seokmin Choi ◽  
Jiyang Li ◽  
...  
Keyword(s):  
User Authentication ◽  
Low Cost ◽  
The Body ◽  
Ear Canal ◽  
Replay Attacks ◽  
Increasing Demand ◽  
The Right ◽  
Sound Conduction ◽  
Enrollment Data ◽  
Secure Authentication

With the rapid growth of wearable computing and increasing demand for mobile authentication scenarios, voiceprint-based authentication has become one of the prevalent technologies and has already presented tremendous potentials to the public. However, it is vulnerable to voice spoofing attacks (e.g., replay attacks and synthetic voice attacks). To address this threat, we propose a new biometric authentication approach, named EarPrint, which aims to extend voiceprint and build a hidden and secure user authentication scheme on earphones. EarPrint builds on the speaking-induced body sound transmission from the throat to the ear canal, i.e., different users will have different body sound conduction patterns on both sides of ears. As the first exploratory study, extensive experiments on 23 subjects show the EarPrint is robust against ambient noises and body motions. EarPrint achieves an Equal Error Rate (EER) of 3.64% with 75 seconds enrollment data. We also evaluate the resilience of EarPrint against replay attacks. A major contribution of EarPrint is that it leverages two-level uniqueness, including the body sound conduction from the throat to the ear canal and the body asymmetry between the left and the right ears, taking advantage of earphones' paring form-factor. Compared with other mobile and wearable biometric modalities, EarPrint is a low-cost, accurate, and secure authentication solution for earphone users.

Design and Implement of High-Accuracy On-Line Metal Thickness Measuring Instrument Based on NiosII Processor

2013 ◽  
Vol 834-836 ◽  
pp. 930-934
Author(s):  
Shou Liang Yang ◽  
Bao Liang Yang
Keyword(s):  
Eddy Current ◽  
Low Cost ◽  
High Accuracy ◽  
Resolving Power ◽  
Current Sensor ◽  
Measuring Instrument ◽  
Precision Data ◽  
Eddy Current Sensor ◽  
Metal Thickness ◽  
On Line

The paper proposes a new design of high-accuracy On-line Metal Thickness Measuring Instrument, which was based on EP2C20 series FPGA chip, through adding NiosII soft processor and other interfaces to FPGA, equipped with high precision data collection system and TFT LCD module and so on. The key hardware blocks schematics and components of the RC Oscillation Circuit,eddy current sensor Circuit,rectifier and filter Circuit,A/D converting circuit,FPGA Circuit are described,software flow charts and sample codes are given. According to practice, The measurement range of this system is 1~100 mm and the resolving power is 0.1 μm. degree of linearity is 1%, The system has many features including small volume of hardware, low cost, high detecting precision, convenient operating, high intelligent and so on, leading to broad and bright future. Key words: NiosII processor; eddy current sensor; metal thickness

Resonant ultrasound spectroscopy of silicon carbide ceramics SiC‒AlN

2021 ◽  
pp. 136-140
Author(s):  
E. G. Pashuk ◽  
G. D Kardashova ◽  
Sh. A. Khalilov
Keyword(s):  
Silicon Carbide ◽  
Elastic Moduli ◽  
Ultrasonic Spectroscopy ◽  
Resonant Ultrasound Spectroscopy ◽  
Plasma Sintering ◽  
Spark Plasma ◽  
Complete Set ◽  
Resonant Ultrasound ◽  
Carbide Ceramics ◽  
Silicon Carbide Ceramics

The paper discusses the possibility of using resonant ultrasonic spectroscopy (RUS) as a source of information for the physics and technology of obtaining silicon carbide ceramics by the example of samples of the composition SiC ‒ 25 % AlN, obtained by the method of spark plasma sintering. The possibility of obtaining a complete set of elastic moduli (EM) of samples with an error of less than 1 % is shown. At the same time, the requirements for surface quality are significantly reduced. The revealed functional relationship between EM and porosity makes it possible to create a non-destructive method of porosity control and calculate the elastic moduli at zero porosity (i. e., the elastic modulus of the ceramic matrix EM0). Comparison of EM0 samples obtained at different parameters of the technological process allows determining their optima values..

A Vision-Based Gap Detection Method during the Placement of Large-Scale Composite Structures

2011 ◽  
Vol 186 ◽  
pp. 11-15
Author(s):  
Li Cao ◽  
Wen Chen ◽  
Jun Xiao
Keyword(s):  
Image Processing ◽  
Video Processing ◽  
Composite Structures ◽  
Large Scale ◽  
Low Cost ◽  
High Quality ◽  
Detection Technology ◽  
Gap Measurement ◽  
Automatic Placement ◽  
On Line

Video processing technology is regarded as a low-cost detection technology in complex environment. Because the placement layer is thin and the surface is complex that causes high detection error and high cost in laser measurement. Two problems must be solved before using it in large-scale composite structures automatic placement. One is to obtain the high-quality and stable image, and the other is to improve efficiency of image processing. In this paper, a method obtaining the high quality placement gap images was studied. It made use of the optical characteristics of composite material’s surface texture. And some parameters were determined by experiments. To reduce the calculation cost of image processing, a placement gap measurement method based on line scanning was also proposed here. The method was effective in our detection experiments on an actual workpiece.

Sign in / Sign up

Export Citation Format

Share Document