scholarly journals A Historical Review of Management Options Used against the Stable Fly (Diptera: Muscidae)

Insects ◽  
2020 ◽  
Vol 11 (5) ◽  
pp. 313
Author(s):  
David Cook
Keyword(s):  
Negative Impact ◽  
Control Strategies ◽  
Historical Review ◽  
Stable Fly ◽  
Management Options ◽  
Stable Flies ◽  
Arthropod Predators ◽  
The Us ◽  
Physical Barriers ◽  
Production Losses

The stable fly, Stomoxys calcitrans (L.) (Diptera: Muscidae), remains a significant economic pest globally in situations where intensive animal production or horticultural production provide a suitable developmental medium. Stable flies have been recorded as pests of livestock and humans since the late 1800s to early 1900s. Over 100 years of research has seen numerous methodologies used to control this fly, in particular to protect cattle from flies to minimise production losses. Reduced milk production in dairy cows and decreased weight gain in beef cattle account for losses in the US alone of > $2000 million annually. Rural lifestyles and recreation are also seriously affected. Progress has been made on many control strategies against stable fly over a range of chemical, biological, physical and cultural options. This paper reviews management options from both a historical and a technical perspective for controlling this pest. These include the use of different classes of insecticides applied to affected animals as toxicants or repellents (livestock and humans), as well as to substrates where stable fly larvae develop. Arthropod predators of stable flies are listed, from which potential biological control agents (e.g., wasps, mites, and beetles) are identified. Biopesticides (e.g., fungi, bacteria and plant-derived products) are also discussed along with Integrated Pest Management (IPM) against stable flies for several animal industries. A review of cultural and physical management options including trapping, trap types and methodologies, farm hygiene, scheduled sanitation, physical barriers to fly emergence, livestock protection and amendments added to animal manures and bedding are covered. This paper presents a comprehensive review of all management options used against stable flies from both a historical and a technical perspective for use by any entomologist, livestock producer or horticulturalist with an interest in reducing the negative impact of this pest fly.

scholarly journals 168 The effects of fly control strategies on fly abundance, fly avoidance behaviors, and performance in feedlot bulls and steers

2020 ◽  
Vol 98 (Supplement_2) ◽  
pp. 15-16
Author(s):  
Courtney McNeff ◽  
Justin Talley ◽  
Colton A Robison ◽  
Blake K Wilson
Keyword(s):  
Treatment Time ◽  
Control Strategies ◽  
Block Design ◽  
Animal Health ◽  
Piperonyl Butoxide ◽  
Stable Fly ◽  
Animal Performance ◽  
Time Interaction ◽  
Avoidance Behaviors ◽  
Fly Control

Abstract The objective of this experiment was to examine the effects of fly control strategies on fly abundance, fly avoidance behaviors, and animal performance in a feedlot setting. Angus bulls (n = 64; BW = 281 ± 36.2 kg) and steers (n = 36; BW = 475 ± 40.4 kg) were blocked by sex and BW and assigned to 1 of 4 experimental treatments in a randomized complete block design (7 pens/treatment; 4 bulls/pen; 3 steers/pen). Treatments included: control (CON; no fly control), abamectin, piperonyl butoxide, and zetacypermethrin insecticide tags (FT; Tri-Zap®, Y-Tex Corporation, Cody, WY), permethrin and piperonyl butoxide pour on (PO; Permectrin® CDS, Bayer Animal Health, Shawnee Mission, KS), or a garlic-powder top dress (GR) administered at 0.28 g •-1 animal •-1d. The experiment was conducted between June and September. Horn and stable fly abundance (FA) and fly avoidance behaviors (FAB; i.e. tail-flicks, stomping, head-tossing) were recorded by trained personnel. Both FA and FAB were recorded once/wk on days with similar temperatures, humidity, wind speed, and without precipitation based on Oklahoma Mesonet data (Stillwater site). There was a tendency for a treatment × time interaction for horn FA with differences in treatments occurring at wk 1, 2, 8, and 14. There was no treatment × time interaction for stable FA or FAB, however both were affected by time (P < 0.001). There were no differences in final BW (P = 0.34), overall ADG (P = 0.30), overall DMI (P = 0.53), or overall G:F (P = 0.39). There was a tendency (P ≤ 0.10) for GR to have decreased BW on d 28 and decreased ADG from d 0 to 28 compared to FT and PO. There was also a tendency (P = 0.09) for decreased DMI from d 0 to 56 for GR compared to CON and FT. Overall FA was less than expected (mean = 1 to 17 flies/animal) throughout the experiment and overall animal performance was unaffected by fly control strategy.

Isolation of Enterobacter sakazakii from Stable Flies, Stomoxys calcitrans L. (Diptera: Muscidae)†

2006 ◽  
Vol 69 (3) ◽  
pp. 671-673 ◽  
Author(s):  
F. MRAMBA ◽  
A. BROCE ◽  
L. ZUREK
Keyword(s):  
16S Rdna ◽  
Foodborne Pathogen ◽  
Animal Manure ◽  
Stomoxys Calcitrans ◽  
Fecal Coliforms ◽  
Stable Fly ◽  
Enterobacter Sakazakii ◽  
Stable Flies ◽  
16S Rdna Pcr ◽  
Glucose Agar

Enterobacter sakazakii is an opportunistic foodborne pathogen that causes meningitis, enterocolitis, and sepsis, primarily in immunocompromised infants. Previously, it was suggested that stable flies, Stomoxys calcitrans, were a vector or reservoir of this pathogen. In our study, by means of a culturing approach combined with 16S rDNA PCR–restriction fragment length polymorphism genotyping and sequencing, we screened 928 individual stable flies collected in Kansas and Florida. Two stable flies (0.2%) were positive for E. sakazakii. In addition, 411 (44%) stable flies carried bacteria-forming red colonies (presumably enterics) on a violet red bile glucose agar (mean count = 6.4 × 104 CFU per fly), and 120 (13%) stable flies carried fecal coliforms (mean count = 8.7 × 103 CFU per fly). Sequencing of 16S rDNA showed that enterics from violet red bile glucose agar were represented by several genera, including Escherichia, Shigella, Providencia, Enterobacter, Pantoea, Proteus, Serratia, and Morganella. Our study shows that stable flies carry bacteria typically present in animal manure (a developmental site of stable fly larvae), which indicates that the natural reservoir of E. sakazakii is the digestive tract or manure of domestic animals. The low prevalence of E. sakazakii associated with stable flies suggests that stable flies do not play a major role as a reservoir or vector of this pathogen.

A review on bromate occurrence and removal strategies in water supply

2006 ◽  
Vol 6 (6) ◽  
pp. 131-136 ◽  
Author(s):  
L. Xie ◽  
C. Shang
Keyword(s):  
Water Supply ◽  
Control Strategies ◽  
Well Being ◽  
Potential Health ◽  
Drinking Water Standard ◽  
Carbon Adsorption ◽  
The Us ◽  
Current Maximum ◽  
Ammonia Addition ◽  
Removal Technologies

The need of disinfecting potable water to eliminate potential health risks associated with waterborne pathogens, however inevitably resulting in leaving elevated toxicity in water by forming disinfection by-products (DBPs) is being considered as one of the primary threats to human well-being. Bromate is a carcinogenic DBP mainly formed during ozonation of bromide-containing water. The current maximum contaminant level (MCL) of bromate in the US national primary drinking water standard is set at 10 μg/L. With continuous improvements in analytical instrumentation and removal technologies, a lower MCL for bromate is expected in the future. Current researches on bromate control strategies involve minimizing bromate formation (like ammonia addition) or removing bromate after formation (like carbon adsorption), however have their own limitations. Seeking for alternative bromate control strategies that can be used alone (or in combine with others) is of great value and in urgent need when water quality standards are getting more stringent. This paper reviews the occurrence of bromate in water supply and evaluates the effectiveness of bromate removal technologies applied, to advance our understanding of bromate fate and degradation in water supply system for future study.

Machining and Grinding: A Historical Review of the Classical Papers

1993 ◽  
Vol 46 (3) ◽  
pp. 80-132 ◽  
Author(s):  
R. Komanduri
Keyword(s):  
Metal Cutting ◽  
Historical Review ◽  
Living Standards ◽  
Michael Field ◽  
Tool Materials ◽  
The Us ◽  
Giant Step ◽  
Grinding Tool ◽  
Manufacturing Productivity ◽  
American Classic

Major contributions to machining and grinding research in the US came in the twentieth century. The seminal work by Frederick Winslow Taylor on the Art of Cutting Metals published in 1907 was the beginning of a series of serious and systematic studies on the various aspects of metal cutting and grinding in this century. This monumental work, which became an American classic, continues to inspire many a researcher in this field even today. It was followed by the works of other pioneers, including Orlan W Boston, Hans Ernst, M E Martellotti, Max Kronenberg, M Eugene Merchant, Milton C Shaw, Michael Field, John Kahles, K J Roubik, K Armitage, Ken Trigger, B T Chao, Alfred Schmidt, William W Gilbert, Fran Boulger, Lester Colwell, Carl Oxford, Erich Thomsen, Robert Hahn, and many others. Many of the associates of the pioneers including Nathan Cook, Iain Finnie, B F von Turkovich, Shiro Kobayaski, Inyong Ham, E Loewen, and others including W B Rice, S M Wu, and J Tlusty have made significant contributions to these fields in their own right. There is no doubt that this century will be heralded by the historians as the golden age of metal cutting and grinding research, particularly the period between 1940 and 1960. It was, however, M Eugene Merchant’s paper on the Basic Mechanics of the Metal Cutting Process in 1945 that took a giant step from the art of metal cutting to the science of metal cutting. This work laid the foundation for much of the work that is practiced today. It can be stated unequivocally that because of the significant contributions by the pioneers and their associates, metal cutting and grinding research today is rich in its heritage and contents, and has contributed towards the improvement of manufacturing productivity. It has thereby facilitated the improvement of living standards around the world. In this review, the following ten topics are addressed briefly: Physics of Machining; Mechanics of Machining; Shear and Friction in Machining; Thermal Aspects of Machining and Grinding; Tool Materials, Tool Wear, and Machinability; Multiple Cutting Points; Grinding; Vibrations in Machining; Surface Integrity; and Economics of Machining.

Optimization of the Hybrid Ship Transport Factor through Retrofitted Wave Cancelling Side-Hull Expansions and Bow Bulb

2015 ◽  
Author(s):  
Manivannan Kandasamy ◽  
Ping C. Wu ◽  
Scott Bartlett ◽  
Loc Nguyen ◽  
Frederick Stern
Keyword(s):  
High Performance ◽  
Negative Impact ◽  
Fiscal Year ◽  
Hull Form ◽  
Transport Factor ◽  
Resistance Reduction ◽  
The Us ◽  
Us Navy ◽  
Speed Range ◽  
Design Speed

The US Navy is currently considering the introduction of a Flight III variant beginning with DDG-123 in Fiscal Year 2016. The new design incorporates a new combat system and associated power and cooling upgrades. The overall system improvements increase the payload of the ship and the resulting increased displacement has a negative impact on the service life allowance for range, fuel consumption and sea-keeping characteristics. The present objective is to increase the hull displacement without resistance and sea-keeping penalty and with minimal modifications to the baseline DTMB-5415 design (open literature surrogate of the existing DDG-51 hull form) by using retrofitted blisters in the form of side hull expansions and a bow-bulb. The investigation makes use of high-performance CFD computing for analysis of wave cancellation mechanisms. A candidate modified 5415 design with both blisters and bow bulb shows a resistance reduction of ~11% w.r.t.the baseline 5415 in the design speed range of 15-19 knots, even though the displacement is increased by 8%, such that the transport factor is increased by 19%.

scholarly journals Peach Brown Rot: Still in Search of an Ideal Management Option

Agriculture ◽  
2018 ◽  
Vol 8 (8) ◽  
pp. 125 ◽  
Author(s):  
Vitus Ikechukwu Obi ◽  
Juan José Barriuso ◽  
Yolanda Gogorcena
Keyword(s):  
Fungal Pathogens ◽  
Crop Production ◽  
Control Strategies ◽  
Brown Rot ◽  
Management Option ◽  
Management Options ◽  
Pests And Diseases ◽  
Resistant Varieties ◽  
Rot Disease ◽  
Post Harvest Loss

The peach is one of the most important global tree crops within the economically important Rosaceae family. The crop is threatened by numerous pests and diseases, especially fungal pathogens, in the field, in transit, and in the store. More than 50% of the global post-harvest loss has been ascribed to brown rot disease, especially in peach late-ripening varieties. In recent years, the disease has been so manifest in the orchards that some stone fruits were abandoned before harvest. In Spain, particularly, the disease has been associated with well over 60% of fruit loss after harvest. The most common management options available for the control of this disease involve agronomical, chemical, biological, and physical approaches. However, the effects of biochemical fungicides (biological and conventional fungicides), on the environment, human health, and strain fungicide resistance, tend to revise these control strategies. This review aims to comprehensively compile the information currently available on the species of the fungus Monilinia, which causes brown rot in peach, and the available options to control the disease. The breeding for brown rot-resistant varieties remains an ideal management option for brown rot disease control, considering the uniqueness of its sustainability in the chain of crop production.

Safety Impact of Weaving Distance on Freeway Facilities with Managed Lanes using Both Microscopic Traffic and Driving Simulations

2018 ◽  
Vol 2672 (39) ◽  
pp. 130-141 ◽  
Author(s):  
Qing Cai ◽  
Moatz Saad ◽  
Mohamed Abdel-Aty ◽  
Jinghui Yuan ◽  
Jaeyoung Lee
Keyword(s):  
Traffic Safety ◽  
Traffic Congestion ◽  
Driving Simulator ◽  
Negative Impact ◽  
Control Strategies ◽  
General Purpose ◽  
Valuable Insight ◽  
Lane Change ◽  
Simulation Studies ◽  
Managed Lanes

With the challenges of increasing traffic congestion, the concept of managed lanes (MLs) has been gaining popularity recently as a means to effectively improve traffic mobility. MLs are usually designed to be left-lane concurrent with an at-grade access/exit. Such a design forms weaving segments since it requires vehicles to change multiple general purpose lanes (GPLs) to enter or exit the ML. The weaving segments could have a negative impact on traffic safety in the GPLs. This study provides a comprehensive investigation of the safety impact of different lengths for each lane change maneuver on GPL weaving segments close to the ingress and egress of MLs through two simulation approaches: VISSIM microsimulation and driving simulator. The two simulation studies are developed based on traffic data collected from freeway I-95 in Miami, Florida. The results from the two simulation studies support each other. Based on the two simulation studies, it is recommended that 1,000 feet be used as the optimal length for per lane change at the GPLs weaving segments with MLs. The safety impact of traffic volume, variable speed limit control strategies, and drivers’ gender and age characteristics are also explored. This study can provide valuable insight for evaluating the traffic performance of freeway weaving segments with the presence of concurrent GPLs and MLs in a highway safety context. It also provides guidelines for future conversion of freeways to include MLs.

Italian Ryegrass (Lolium Multiflorum) Management Options in Winter Wheat in Oklahoma

2007 ◽  
Vol 21 (1) ◽  
pp. 151-158 ◽  
Author(s):  
Chad S. Trusler ◽  
Thomas F. Peeper ◽  
Amanda E. Stone
Keyword(s):  
Winter Wheat ◽  
Plant Density ◽  
Control Strategies ◽  
Lolium Multiflorum ◽  
Wheat Yield ◽  
Italian Ryegrass ◽  
Wheat Crop ◽  
Management Options ◽  
Spike Density ◽  
Herbicide Treatments

An experiment was conducted at three sites in central Oklahoma to compare the efficacy of Italian ryegrass management options in no-till (NT) and conventional tillage (CT) winter wheat. The Italian ryegrass management options included selected herbicide treatments, wheat-for-hay, and a rotation consisting of double-crop soybean seeded immediately after wheat harvest, followed by early season soybean, and then by wheat. In continuous wheat, before application of glyphosate or tillage, Italian ryegrass plant densities in mid-September were 12,300 to 15,000 plants/m2in NT plots vs. 0 to 500 plants/m2in CT plots. When applied POST, diclofop controlled more Italian ryegrass than tralkoxydim or sulfosulfuron. In continuous wheat, yields were greater in CT plots than in NT plots at two of three sites. None of the Italian ryegrass management options consistently reduced Italian ryegrass density in the following wheat crop. Of the Italian ryegrass control strategies applied to continuous wheat, three herbicide treatments in NT at Chickasha and all treatments in NT at Perry reduced Italian ryegrass density in the following wheat crop. Italian ryegrass plant density in November and spike density were highly related to wheat yield at two and three sites, respectively. No management options were more profitable than rotation to soybean.

DENSITY ESTIMATES AND DAILY MORTALITY RATE EVALUATIONS OF STABLE FLY (STOMOXYS CALCITRANS (DIPTERA: MUSCIDAE)) POPULATIONS IN FIELD CAGES

1975 ◽  
Vol 107 (6) ◽  
pp. 597-600 ◽  
Author(s):  
G. C. LaBrecque ◽  
Donald L. Bailey ◽  
D. W. Meifert ◽  
D. E. Weidhaas
Keyword(s):  
Mortality Rate ◽  
Sampling Technique ◽  
Late Summer ◽  
Stomoxys Calcitrans ◽  
Stable Fly ◽  
Daily Mortality ◽  
Density Estimates ◽  
Stable Flies ◽  
Normal Individuals ◽  
Gamma Irradiated

AbstractIn outdoor cage studies undertaken in the late summer of 1973, a method of estimating the absolute density of a stable fly (Stomoxys calcitrans (L.)) population was developed by correlating the average number of insects feeding or resting on a calf to the total number in the cage. Under the same cage conditions, where emigration, immigration, and to some extent, predation have been excluded, the daily mortality rate of normal stable flies marked with a fluorescent dye ranged from 25.3% to 27.3% dependent upon the sampling technique. Marker dyes have a deleterious effect on survival but surprisingly gamma irradiated flies succumbed at a lower rate than normal individuals.

scholarly journals New records, a completed list and identification key of mites (Acari) associated with the stable fly, Stomoxys calcitrans (L.) (Diptera: Muscidae)

Acarologia ◽  
2018 ◽  
Vol 59 (1) ◽  
pp. 3-11
Author(s):  
Jenő Kontschán ◽  
Sándor Hornok
Keyword(s):  
First Record ◽  
Mite Species ◽  
Identification Key ◽  
Stomoxys Calcitrans ◽  
Stable Fly ◽  
Stable Flies ◽  
Worldwide Distribution ◽  
Blood Sucking ◽  
The Family ◽  
Medical Importance

The stable fly, Stomoxys calcitrans (L.) is a blood-sucking muscid fly species, with a worldwide distribution and high veterinary-medical importance. In this study, four mite species were collected from stable flies in Hungary. One mite species (Trichotrombidium muscarum (Riley, 1878)) from the family Microtrombidiidae was parasitic on the flies, collected in high numbers from their bodies. The other three species were found in small numbers on the flies, which they use only for transportation. The latter included the phoretic female of Pediculaster mesembrinae (Canestrini, 1881) (Acari: Siteroptidae), the phoretic deutonymph of the Halolaelaps sexclavatus (Oudemans, 1902) (Acari: Halolaelapidae) and Macrocheles subbadius (Berlese, 1904) (Acari: Macrochelidae). This is the first record of an association between the stable fly and two mite species (Trichotrombidium muscarum and Halolaelaps sexclavatus). A new, completed list and identification key of known stable fly associated mites are also provided.

Sign in / Sign up

Export Citation Format

Share Document