scholarly journals Oogenesis of Hematophagous Midge Forcipomyia taiwana (Diptera: Ceratopogonidae) and Nuage Localization of Vasa in Germline Cells

Insects ◽  
2020 ◽  
Vol 11 (2) ◽  
pp. 106
Author(s):  
Wang ◽  
Ching ◽  
Krishnaraj ◽  
Chen ◽  
Radhakrishnan ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Nuclear Envelope ◽  
Reproductive Biology ◽  
Pest Control ◽  
Nurse Cell ◽  
Control Strategies ◽  
Germline Cells ◽  
High Degree ◽  
Female Germline ◽  
Transgenic Flies

Forcipomyia taiwana is an irritating hematophagous midge that preferentially attacks humans and affects leisure industries in Taiwan. Understanding the female reproductive biology of such pests would facilitate the development of pest control strategies. However, knowledge about oogenesis in the genus Forcipomyia is unavailable. Accordingly, we examined the ovariole structure and features of oogenesis in terms of the oocyte and the nurse cell. After being blood-fed, we observed a high degree of gonotrophic harmony—the synchronization of developing follicles. The follicle of the F. taiwana has only one nurse cell connected to the oocyte, which is distinct among hematophagous midges. In the nurse cell, we identified the perinuclear localization of the germline marker, Vasa. The Vasa localization is reminiscent of the nuclear envelope-associated nuage observed by electron microscopy. To determine whether F. taiwana Vasa (FtVasa) is an authentic nuage component, we produced transgenic flies expressing FtVasa in the female germline and proved that FtVasa was able to be localized to Drosophila nuage. By characterizing the oogenesis and Vasa expression in the germline cells of F. taiwana, this study extends knowledge about the female reproductive biology of hematophagous midges.

Tissue section lifting for electron microscopy

1978 ◽  
Vol 36 (2) ◽  
pp. 86-87
Author(s):  
Adrian F. van Dellen
Keyword(s):  
Infectious Disease ◽  
Electron Microscopy ◽  
Tissue Culture ◽  
Organ System ◽  
Surrounding Tissue ◽  
Paraffin Sections ◽  
Surface Areas ◽  
Specific Determination ◽  
High Degree ◽  
Accuracy And Repeatability

The morphologic pathologist may require information on the ultrastructure of a non-specific lesion seen under the light microscope before he can make a specific determination. Such lesions, when caused by infectious disease agents, may be sparsely distributed in any organ system. Tissue culture systems, too, may only have widely dispersed foci suitable for ultrastructural study. In these situations, when only a few, small foci in large tissue areas are useful for electron microscopy, it is advantageous to employ a methodology which rapidly selects a single tissue focus that is expected to yield beneficial ultrastructural data from amongst the surrounding tissue. This is in essence what "LIFTING" accomplishes. We have developed LIFTING to a high degree of accuracy and repeatability utilizing the Microlift (Fig 1), and have successfully applied it to tissue culture monolayers, histologic paraffin sections, and tissue blocks with large surface areas that had been initially fixed for either light or electron microscopy.

Electron Microscopy in Molecular Biology

1967 ◽  
Vol 25 ◽  
pp. 2-3
Author(s):  
Cecil E. Hall
Keyword(s):  
Electron Microscopy ◽  
Molecular Biology ◽  
Noise Level ◽  
Molecular Structures ◽  
Material Structure ◽  
The Arts ◽  
Shadow Casting ◽  
Electron Image ◽  
High Degree ◽  
Very High

The visualization of organic macromolecules such as proteins, nucleic acids, viruses and virus components has reached its high degree of effectiveness owing to refinements and reliability of instruments and to the invention of methods for enhancing the structure of these materials within the electron image. The latter techniques have been most important because what can be seen depends upon the molecular and atomic character of the object as modified which is rarely evident in the pristine material. Structure may thus be displayed by the arts of positive and negative staining, shadow casting, replication and other techniques. Enhancement of contrast, which delineates bounds of isolated macromolecules has been effected progressively over the years as illustrated in Figs. 1, 2, 3 and 4 by these methods. We now look to the future wondering what other visions are waiting to be seen. The instrument designers will need to exact from the arts of fabrication the performance that theory has prescribed as well as methods for phase and interference contrast with explorations of the potentialities of very high and very low voltages. Chemistry must play an increasingly important part in future progress by providing specific stain molecules of high visibility, substrates of vanishing “noise” level and means for preservation of molecular structures that usually exist in a solvated condition.

Fine structure and possible functions of the hermaphrodite duct of some pulmonate snails (Mollusca: Gastropoda)

1990 ◽  
Vol 48 (3) ◽  
pp. 68-69
Author(s):  
Alan N. Hodgson
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Fine Structure ◽  
Seminal Vesicle ◽  
Reproductive Biology ◽  
Light Microscope ◽  
Light Microscope Level ◽  
Transmission Electron ◽  
Standard Techniques

The hermaphrodite duct of pulmonate snails connects the ovotestis to the fertilization pouch. The duct is typically divided into three zones; aproximal duct which leaves the ovotestis, the middle duct (seminal vesicle) and the distal ovotestis duct. The seminal vesicle forms the major portion of the duct and is thought to store sperm prior to copulation. In addition the duct may also play a role in sperm maturation and degredation. Although the structure of the seminal vesicle has been described for a number of snails at the light microscope level there appear to be only two descriptions of the ultrastructure of this tissue. Clearly if the role of the hermaphrodite duct in the reproductive biology of pulmonatesis to be understood, knowledge of its fine structure is required.Hermaphrodite ducts, both containing and lacking sperm, of species of the terrestrial pulmonate genera Sphincterochila, Levantina, and Helix and the marine pulmonate genus Siphonaria were prepared for transmission electron microscopy by standard techniques.

scholarly journals A 3D hydrodynamic flow-focusing device for cell sorting

2021 ◽  
Vol 25 (3) ◽  
Author(s):  
Xiaofei Yuan ◽  
Andrew Glidle ◽  
Hitoshi Furusho ◽  
Huabing Yin
Keyword(s):  
Cell Sorting ◽  
Control Strategies ◽  
Three Dimensional ◽  
Hydrodynamic Flow ◽  
Proof Of Concept ◽  
Flow Focusing ◽  
Hydrodynamic Focusing ◽  
Cell Handling ◽  
Fluid Flow Control ◽  
High Degree

AbstractOptical-based microfluidic cell sorting has become increasingly attractive for applications in life and environmental sciences due to its ability of sophisticated cell handling in flow. The majority of these microfluidic cell sorting devices employ two-dimensional fluid flow control strategies, which lack the ability to manipulate the position of cells arbitrarily for precise optical detection, therefore resulting in reduced sorting accuracy and purity. Although three-dimensional (3D) hydrodynamic devices have better flow-focusing characteristics, most lack the flexibility to arbitrarily position the sample flow in each direction. Thus, there have been very few studies using 3D hydrodynamic flow focusing for sorting. Herein, we designed a 3D hydrodynamic focusing sorting platform based on independent sheath flow-focusing and pressure-actuated switching. This design offers many advantages in terms of reliable acquisition of weak Raman signals due to the ability to precisely control the speed and position of samples in 3D. With a proof-of-concept demonstration, we show this 3D hydrodynamic focusing-based sorting device has the potential to reach a high degree of accuracy for Raman activated sorting.

CHARACTERIZATION AND ELECTRICAL PROPERTIES OF ALIGNED CARBON NANOTUBES WITH HIGH ASPECT RATIO

2011 ◽  
Vol 10 (01n02) ◽  
pp. 23-28
Author(s):  
RAVI BHATIA ◽  
V. PRASAD ◽  
M. REGHU
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Aspect Ratio ◽  
Multiwall Carbon Nanotubes ◽  
High Quality ◽  
Transmission Electron Microscopy Analysis ◽  
Transmission Electron ◽  
Electron Microscopy Analysis ◽  
High Degree

High-quality multiwall carbon nanotubes (MWNTs) were produced by a simple one-step technique. The production of MWNTs was based on thermal decomposition of the mixture of a liquid phase organic compound and ferrocene. High degree of alignment was noticed by scanning electron microscopy. The aspect ratio of as-synthesized MWNTs was quite high (more than 4500). Transmission electron microscopy analysis showed the presence of the catalytic iron nanorods at various lengths of MWNTs. Raman spectroscopy was used to know the quality of MWNTs. The ratio of intensity of the G-peak to the D-peak was very high which revealed high quality of MWNTs. Magnetotransport studies were carried out at low temperature and a negative MR was noticed.

Fabrication and characterization of highly textured (Bi,Pb)2Sr2Ca2Cu3Ox superconducting ceramics using high magnetic field and cold isostatic pressing

1995 ◽  
Vol 10 (10) ◽  
pp. 2433-2443 ◽  
Author(s):  
Wai Lo ◽  
R. Stevens ◽  
R. Doyle ◽  
A.M. Campbell ◽  
W.Y. Liang
Keyword(s):  
Magnetic Field ◽  
Electron Microscopy ◽  
Cold Isostatic Pressing ◽  
Sintered Ceramic ◽  
Grain Alignment ◽  
Isostatic Pressing ◽  
Transmission Electron ◽  
Superconducting Ceramics ◽  
High Degree

High textured (Bi,Pb)2Sr2Ca2Cu3Ox ceramics have been fabricated by aligning deflocculated flakes of (Bi,Pb)2Sr2Ca2Cu3Ox suspended in an organic medium by means of a high de magnetic field (6 T) at room temperature followed by cold isostatic pressing. The proportion of the (Bi,Pb)2Sr2Ca2Cu3Ox phase in the precursor powder was carefully controlled, and the characteristics of the powder, such as size distribution and morphology, were determined. A high degree of grain alignment was found in the specimens after the magnetic alignment, although the bulk density of the materials was low. Cold isostatic pressing substantially increased the density of the magnetically prealigned specimens which also resulted in a slight decrease in the degree of grain alignment. This minor realignment was found to be due to the various kinds of processing defects that appeared in the specimens during compaction due to the grinding and cracking of the grains and their interlocking. The microstructural and superconducting properties of the sintered ceramic have been studied using texture goniometry, high resolution scanning electron microscopy, transmission electron microscopy, ac magnetic susceptometry, and critical current measurements.

scholarly journals Correlation between structure and mass distribution of the nuclear pore complex and of distinct pore complex components.

1990 ◽  
Vol 110 (4) ◽  
pp. 883-894 ◽  
Author(s):  
R Reichelt ◽  
A Holzenburg ◽  
E L Buhle ◽  
M Jarnik ◽  
A Engel ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Nuclear Envelope ◽  
Three Dimensional ◽  
Structural Features ◽  
Nuclear Pore ◽  
Xenopus Laevis Oocyte ◽  
Three Dimensional Model ◽  
Transmission Electron ◽  
Freeze Dried

Nuclear pore complexes (NPCs) prepared from Xenopus laevis oocyte nuclear envelopes were studied in "intact" form (i.e., unexposed to detergent) and after detergent treatment by a combination of conventional transmission electron microscopy (CTEM) and quantitative scanning transmission electron microscopy (STEM). In correlation-averaged CTEM pictures of negatively stained intact NPCs and of distinct NPC components (i.e., "rings," "spoke" complexes, and "plug-spoke" complexes), several fine structural features arranged with octagonal symmetry about a central axis could reproducibly be identified. STEM micrographs of unstained/freeze-dried intact NPCs as well as of their components yielded comparable but less distinct features. Mass determination by STEM revealed the following molecular masses: intact NPC with plug, 124 +/- 11 MD; intact NPC without plug, 112 +/- 11 MD; heavy ring, 32 +/- 5 MD; light ring, 21 +/- 4 MD; plug-spoke complex, 66 +/- 8 MD; and spoke complex, 52 +/- 3 MD. Based on these combined CTEM and STEM data, a three-dimensional model of the NPC exhibiting eightfold centrosymmetry about an axis perpendicular to the plane of the nuclear envelope but asymmetric along this axis is proposed. This structural polarity of the NPC across the nuclear envelope is in accord with its well-documented functional polarity facilitating mediated nucleocytoplasmic exchange of molecules and particles.

Morphology and behaviour of dinoflagellate chromosomes during the cell cycle and mitosis

2000 ◽  
Vol 113 (7) ◽  
pp. 1231-1239 ◽  
Author(s):  
Y. Bhaud ◽  
D. Guillebault ◽  
J. Lennon ◽  
H. Defacque ◽  
M.O. Soyer-Gobillard ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Cell Cycle ◽  
Confocal Microscopy ◽  
Nuclear Envelope ◽  
Chromosome Segregation ◽  
Morphological Changes ◽  
S Phase ◽  
Chromosome Behaviour ◽  
Double Number ◽  
Do So

The morphology and behaviour of the chromosomes of dinoflagellates during the cell cycle appear to be unique among eukaryotes. We used synchronized and aphidicolin-blocked cultures of the dinoflagellate Crypthecodinium cohnii to describe the successive morphological changes that chromosomes undergo during the cell cycle. The chromosomes in early G(1) phase appeared to be loosely condensed with numerous structures protruding toward the nucleoplasm. They condensed in late G(1), before unwinding in S phase. The chromosomes in cells in G(2) phase were tightly condensed and had a double number of arches, as visualised by electron microscopy. During prophase, chromosomes elongated and split longitudinally, into characteristic V or Y shapes. We also used confocal microscopy to show a metaphase-like alignment of the chromosomes, which has never been described in dinoflagellates. The metaphase-like nucleus appeared flattened and enlarged, and continued to do so into anaphase. Chromosome segregation occurred via binding to the nuclear envelope surrounding the cytoplasmic channels and microtubule bundles. Our findings are summarized in a model of chromosome behaviour during the cell cycle.

scholarly journals The Core and Holoenzyme Forms of RNA Polymerase from Mycobacterium smegmatis

2018 ◽  
Vol 201 (4) ◽  
Author(s):  
Tomáš Kouba ◽  
Jiří Pospíšil ◽  
Jarmila Hnilicová ◽  
Hana Šanderová ◽  
Ivan Barvík ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Rna Polymerase ◽  
Conformational Changes ◽  
Mycobacterium Smegmatis ◽  
Drug Target ◽  
Conformational Dynamics ◽  
Three Dimensional ◽  
Cryo Electron Microscopy ◽  
Bacterial Rna ◽  
High Degree

ABSTRACT Bacterial RNA polymerase (RNAP) is essential for gene expression and as such is a valid drug target. Hence, it is imperative to know its structure and dynamics. Here, we present two as-yet-unreported forms of Mycobacterium smegmatis RNAP: core and holoenzyme containing σA but no other factors. Each form was detected by cryo-electron microscopy in two major conformations. Comparisons of these structures with known structures of other RNAPs reveal a high degree of conformational flexibility of the mycobacterial enzyme and confirm that region 1.1 of σA is directed into the primary channel of RNAP. Taken together, we describe the conformational changes of unrestrained mycobacterial RNAP. IMPORTANCE We describe here three-dimensional structures of core and holoenzyme forms of mycobacterial RNA polymerase (RNAP) solved by cryo-electron microscopy. These structures fill the thus-far-empty spots in the gallery of the pivotal forms of mycobacterial RNAP and illuminate the extent of conformational dynamics of this enzyme. The presented findings may facilitate future designs of antimycobacterial drugs targeting RNAP.

scholarly journals Supramolecular Structures of the Dictyostelium Lamin NE81

Cells ◽  
2019 ◽  
Vol 8 (2) ◽  
pp. 162
Author(s):  
Marianne Grafe ◽  
Petros Batsios ◽  
Irene Meyer ◽  
Daria Lisin ◽  
Otto Baumann ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Nuclear Envelope ◽  
Model Organism ◽  
Super Resolution ◽  
Nuclear Lamina ◽  
Stimulated Emission ◽  
Structural Level ◽  
Animal Cells ◽  
Nuclear Lamins

Nuclear lamins are nucleus-specific intermediate filaments (IF) found at the inner nuclear membrane (INM) of the nuclear envelope (NE). Together with nuclear envelope transmembrane proteins, they form the nuclear lamina and are crucial for gene regulation and mechanical robustness of the nucleus and the whole cell. Recently, we characterized Dictyostelium NE81 as an evolutionarily conserved lamin-like protein, both on the sequence and functional level. Here, we show on the structural level that the Dictyostelium NE81 is also capable of assembling into filaments, just as metazoan lamin filament assemblies. Using field-emission scanning electron microscopy, we show that NE81 expressed in Xenopous oocytes forms filamentous structures with an overall appearance highly reminiscent of Xenopus lamin B2. The in vitro assembly properties of recombinant His-tagged NE81 purified from Dictyostelium extracts are very similar to those of metazoan lamins. Super-resolution stimulated emission depletion (STED) and expansion microscopy (ExM), as well as transmission electron microscopy of negatively stained purified NE81, demonstrated its capability of forming filamentous structures under low-ionic-strength conditions. These results recommend Dictyostelium as a non-mammalian model organism with a well-characterized nuclear envelope involving all relevant protein components known in animal cells.

Sign in / Sign up

Export Citation Format

Share Document