scholarly journals Polylactide/Hydroxyapatite Nonwovens Incorporated into Chitosan/Graphene Materials Hydrogels to Form Novel Hierarchical Scaffolds

2020 ◽  
Vol 21 (7) ◽  
pp. 2330 ◽  
Author(s):  
Karolina Kosowska ◽  
Patrycja Domalik-Pyzik ◽  
Małgorzata Krok-Borkowicz ◽  
Jan Chłopek
Keyword(s):  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Three Dimensional ◽  
Total Reflection ◽  
Attenuated Total Reflection ◽  
X Ray ◽  
Composite Systems ◽  
Reduced Graphene ◽  
Electrospinning Method ◽  
Potential Use

In this study, hierarchical, cylindrical scaffolds based on polylactide (PLA) microfibers incorporated into chitosan (CS) hydrogel were prepared for potential use in bone tissue engineering. PLA nonwovens modified with hydroxyapatite particles (HAp) were obtained using the electrospinning method. Then, three-dimensional scaffolds were created by rolling up the nonwovens and immersing them in CS-based solutions with graphene oxide (GO) or reduced graphene oxide (rGO) dispersed in the polymer matrix. Hydrogels were cross-linked using a novel freezing-thawing-gelling method. A broad spectrum of research methods was applied in order to thoroughly characterize both the nanofillers and the composite systems: scanning electron microscopy, X-ray photoelectron spectroscopy, X-ray diffractometry, attenuated total reflection Fourier transform infrared spectroscopy, rheological and mechanical testing, as well as the assessment of chemical stability, bioactivity and cytocompatibility.

Simplified Synthesis of 3D Flexible Reduced Graphene Oxide-Wrapped NiCo2O4 Nanowires for High-Performance Supercapacitor

2018 ◽  
Vol 10 (3) ◽  
pp. 358-364 ◽  
Author(s):  
Chao Pan ◽  
Hongyu Sun ◽  
Jingyi Gao ◽  
Yucai Hu ◽  
Jing Wang
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Current Density ◽  
Photoelectron Spectroscopy ◽  
High Performance ◽  
High Current Density ◽  
Three Dimensional ◽  
Simple Method ◽  
X Ray ◽  
Reduced Graphene

We introduced a simple method to construct novel three-dimensional (3D) flexible hierarchical nanocomposites by combining (1D) NiCo2O4 nanowires with 2D reduced graphene oxide (rGO) sheets. The hierarchical nanocomposite structure of rGO-wrapped NiCo2O4 (rGO-NiCo2O4) was confirmed by X-ray diffraction (XRD), Raman spectra, scanning electron microscopy (SEM), transmission electron microscope (TEM), and X-ray photoelectron spectroscopy (XPS). The results indicated that NiCo2O4 nanowires were successfully wrapped in rGO and the morphology of the rGO-NiCo2O4 showed a three-dimensional porous structure with NiCo2O4 being homogeneously distributed in the rGO. Given their apparent advantages, these two different nanostructures were evaluated as electrodes for high-performance supercapacitors. These electrodes exhibited a high capacitance of 1824.8 F·g–1 at a current density of 0.5 A·g–1, and an excellent cycling performance extending to 5000 cycles at a high current density of 4 A·g–1. Our results clearly demonstrate that rGO sheets on NiCo2O4 nanowires can substantially improve the capacitive performance of materials and ultimately increase the cycling stability of supercapacitors. The hierarchical binary nanocomposites show excellent electrochemical properties for energy storage applications, evidencing their potential application as supercapacitors.

Reduced Graphene Oxide Supported Molybdenum Oxide Hybrid Nanocomposites: High Performance Electrode Material for Supercapacitor and Photocatalytic Applications

2020 ◽  
Vol 20 (7) ◽  
pp. 4035-4046
Author(s):  
Rengasamy Dhanabal ◽  
Dhanasekaran Naveena ◽  
Sivan Velmathi ◽  
Arumugam Chandra Bose
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Hybrid Nanocomposites ◽  
X Ray ◽  
Supercapacitor Application ◽  
Quenching Effect ◽  
Reduced Graphene

Using a simple solution based synthesis route, hexagonal MoO3 (h-MoO3) nanorods on reduced graphene oxide (RGO) sheets were prepared. The structure and morphology of resulting RGO-MoO3 nanocomposite were characterized using X-ray diffraction (XRD), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), transmission electron microscopy (TEM) and field emission scanning electron microscopy (FESEM). The optical property was studied using UV-Visible diffuse reflectance spectroscopy (UV-Vis DRS) and photoluminescence spectroscopy (PL). The RGO-MoO3 nanocomposites were used as an electrode for supercapacitor application and photocatalyst for photodegradation of methylene blue (MB) and rhodamine B (RhB) under visible light irradiation. We demonstrated that the RGO-MoO3 electrode is capable of delivering high specific capacitance of 134 F/g at current density of 1 A/g with outstanding cyclic stability for 2000 cycles. The RGOMoO3 photocatalyst degrades 95% of MB dye within 90 min, and a considerable recyclability up to 4 cycles was observed. The quenching effect of scavengers test confirms holes are main reactive species in the photocatalytic degradation of MB. Further, the charge transfer process between RGO and MoO3 was schematically demonstrated.

scholarly journals Effects of Different TiO2 Particle Sizes on the Microstructure and Optical Limiting Properties of TiO2/Reduced Graphene Oxide Nanocomposites

Nanomaterials ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 730 ◽  
Author(s):  
Yuyu Ren ◽  
Lili Zhao ◽  
Yang Zou ◽  
Lixin Song ◽  
Ningning Dong ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Optical Limiting ◽  
Tio2 Particle ◽  
Tetrabutyl Titanate ◽  
Particle Sizes ◽  
X Ray ◽  
Reduced Graphene ◽  
Source Materials

TiO2/reduced graphene oxide (rGO) nanocomposites with two different TiO2 particle sizes were synthesized by a facile hydrothermal method using two different source materials of Ti: tetrabutyl titanate (TBT) and commercial TiO2 powder (P25). For respective series with the same source materials, we investigated additions that optimized the nonlinear optical properties (NLO) and optical limiting (OL) performances, and we explored the relationships between structural diversity and performance. Several characterization techniques, including X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, and diffuse reflectance ultraviolet-visible spectroscopy (UV-Vis) were conducted to confirm the microstructures and chemical states of as-prepared materials. This indicated the existence of the Ti–O–C bond between rGO sheets and TiO2 particles and the reduction from precursor graphene oxide (GO) to rGO. The results of UV-Vis spectra revealed that the TiO2/rGO nanocomposites showed smaller band gaps than bare TiO2. A nanosecond open-aperture Z-scan technique at 1064 nm was applied to investigate NLO and OL properties. TiO2/rGO nanocomposites exhibited enhanced NLO and OL performances, arising from synergistic effects, compared to individual components. The TBT series samples performed better than the P25 series, presumably relevant to dimensional effects.

scholarly journals Reduced Graphene Oxide–Epoxy Grafted Poly(Styrene-Co-Acrylate) Composites for Corrosion Protection of Mild Steel

Coatings ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 666
Author(s):  
Xinchuan Fan ◽  
Yue Hu ◽  
Yijun Zhang ◽  
Jiachen Lu ◽  
Xiaofeng Chen ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
X Ray Diffraction ◽  
Corrosion Properties ◽  
X Ray ◽  
Transmission Electron ◽  
Reduced Graphene ◽  
Scanning Electron

Reduced graphene oxide–epoxy grafted poly(styrene-co-acrylate) composites (GESA) were prepared by anchoring different amount of epoxy modified poly(styrene-co-acrylate) (EPSA) onto reduced graphene oxide (rGO) sheets through π–π electrostatic attraction. The GESA composites were characterized by Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The anti-corrosion properties of rGO/EPSA composites were evaluated by electro-chemical impedance spectroscopy (EIS) in hydroxyl-polyacrylate coating, and the results revealed that the corrosion rate was decreased from 3.509 × 10−1 to 1.394 × 10−6 mm/a.

Facile Synthesis of Modified MnO2/Reduced Graphene Oxide Nanocomposites and their Application in Supercapacitors

NANO ◽  
2020 ◽  
Vol 15 (08) ◽  
pp. 2050099
Author(s):  
Lijun Chen ◽  
Hongfeng Yin ◽  
Yuchao Zhang ◽  
Huidong Xie
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Specific Capacitance ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Electrode Materials ◽  
Normal Pressure ◽  
X Ray ◽  
Assembly Method ◽  
Reduced Graphene

Herein, KH-550 was used as surface modifier to prepare modified MnO2/reduced graphene oxide (M-MnO2/rGO) composite electrode materials by utilizing electrostatic interaction at low temperature and normal pressure. X-ray diffraction, scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy were adopted to characterize the material’s phase, morphology, and valence state of elements. The electrochemical properties of the material were measured using a three-electrode system. The results indicate a decrease in the size of the modified MnO2 particles, and that they were uniformly distributed on the rGO sheets. The M-MnO2/rGO composite attained a specific capacitance of 326[Formula: see text]F[Formula: see text]g[Formula: see text] in a solution of 1[Formula: see text]mol[Formula: see text]L[Formula: see text] Na2SO4 at a current density of 0.5[Formula: see text]A[Formula: see text]g[Formula: see text]. The specific capacitance of the material was 92.4% after 1000 cycles. The electrostatic self-assembly method effectively solved the problem of reducing the cycling stability while improving the specific capacitance of the composite materials, and further improved the possibility of applying MnO2/rGO in the field of supercapacitors.

Fabrication of Nickel Sulfide/Nitrogen-Doped Reduced Graphene Oxide Nanocomposite as Anode Material for Lithium-Ion Batteries and Its Electrochemical Performance

2020 ◽  
Vol 20 (11) ◽  
pp. 6782-6787
Author(s):  
Yeon-Ju Lee ◽  
Tae-Hyun Ha ◽  
Gyu-Bong Cho ◽  
Ki-Won Kim ◽  
Jou-Hyeon Ahn ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Lithium Ion ◽  
Treatment Method ◽  
Retention Capacity ◽  
Graphene Nanocomposites ◽  
X Ray ◽  
Nitrogen Doped ◽  
Reduced Graphene

In this study, NiS/graphene nanocomposites were synthesized by simple heat treatment method of three graphene materials (graphene oxide (GO), reduced graphene oxide (rGO) and nitrogen-doped graphene oxide (N-rGO)) and NiS precursor. The morphology and crystal structure of NiS/graphene nanocomposites were characterized using field emission scanning electron microscope (FE-SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. Electrochemical properties were also investigated. NiS/graphene nanocomposites homogeneously wrapped by graphene materials have been successfully manufactured. Among the three nanocomposites, NiS/N-rGO nanocomposite exhibited the highest initial and retention capacity in discharge, respectively, of 1240 mAh/g and 467 mAh/g up to 100 cycles at 0.5 C.

Nitrogen, Sulfur Co-Doped Reduced Graphene Oxide: Synthesis and Characterization

2020 ◽  
Vol 12 (2) ◽  
pp. 129-134
Author(s):  
Md. Abdul Mannan ◽  
Yudai Hirano ◽  
Armando T. Quitain ◽  
Michio Koinuma ◽  
Tetsuya Kida
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Implantation Technique ◽  
Chemical Bonds ◽  
X Ray ◽  
Reduced Graphene ◽  
Single Source Precursor ◽  
Ft Ir ◽  
Co Doped

Objective and Method: In this present research, a simple hydrothermal implantation technique for synthesizing N,S co-doped reduced graphene oxide (NS-r-GO) has been presented in which thiourea was used as a single-source precursor of N and S atoms. Results: Maximum N and S atoms, with an atomic percentage of 3.50 and 7.50 (at.%), were achieved in the GO matrix at the reaction temperature of 250°C. Introduction of N and S atoms into the GO lattice was confirmed by X-ray photoelectron spectroscopy (XPS). Different chemical bonds such as –C– S–C, C=O, N–O, and C–N–C have been suggested from the corresponding C1s, N1s, O1s, and S2p high-resolution XPS spectral analyses. Conclusion: FT-IR measurement also confirmed the presence of different functional groups as well as the formation of different bonds such as –OH, –N–H, –C=O, –C–OH, and C-S. XRD and Raman spectroscopy analyses confirmed the defects structures that arose from the penetration of N and S atoms into the GO lattice.

scholarly journals Reduced Graphene Oxide-Based Foam as an Endocrine Disruptor Adsorbent in Aqueous Solutions

Membranes ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 340
Author(s):  
Jeanne N’Diaye ◽  
Sujittra Poorahong ◽  
Ons Hmam ◽  
Gastón Contreras Jiménez ◽  
Ricardo Izquierdo ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Bisphenol A ◽  
Photoelectron Spectroscopy ◽  
Adsorption Process ◽  
Hierarchical Structures ◽  
Magnetic Graphene Oxide ◽  
Freundlich Model ◽  
X Ray ◽  
Reduced Graphene ◽  
Co Precipitation

A stable and magnetic graphene oxide (GO) foam–polyethyleneimine–iron nanoparticle (GO–PEI–FeNPs) composite has been fabricated for removal of endocrine disruptors—bisphenol A, progesterone and norethisterone—from aqueous solution. The foam with porous and hierarchical structures was synthesized by reduction of graphene oxide layers coupled with co-precipitation of iron under a hydrothermal system using polyethyleneimine as a cross linker. The presence of magnetic iron nanoparticles facilitates the separation process after decontamination. The foam was fully characterized by surface and structural scanning electron microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy and X-ray photoelectron spectroscopy. The foam exhibits a high adsorption capacity, and the maximum adsorption percentages are 68%, 49% and 80% for bisphenol A, progesterone and norethisterone, respectively. The adsorption process of bisphenol A is explained according to the Langmuir model, whereas the Freundlich model was used for progesterone and norethisterone adsorption.

Sign in / Sign up

Export Citation Format

Share Document