scholarly journals Sustained Release of Levobupivacaine, Lidocaine, and Acemetacin from Electrosprayed Microparticles: In Vitro and In Vivo Studies

2020 ◽  
Vol 21 (3) ◽  
pp. 1093
Author(s):  
Jian-Ming Chen ◽  
Kuan-Chieh Liu ◽  
Wen-Ling Yeh ◽  
Jin-Chung Chen ◽  
Shih-Jung Liu
Keyword(s):  
Pain Relief ◽  
Release Kinetics ◽  
Human Fibroblasts ◽  
Fracture Site ◽  
In Vivo Studies ◽  
Infrared Spectrometry ◽  
Plga Microparticles ◽  
Low Toxicity

In this study, we explored the release characteristics of analgesics, namely levobupivacaine, lidocaine, and acemetacin, from electrosprayed poly(D,L-lactide-co-glycolide) (PLGA) microparticles. The drug-loaded particles were prepared using electrospraying techniques and evaluated for their morphology, drug release kinetics, and pain relief activity. The morphology of the produced microparticles elucidated by scanning electron microscopy revealed that the optimal parameters for electrospraying were 9 kV, 1 mL/h, and 10 cm for voltage, flow rate, and travel distance, respectively. Fourier-transform infrared spectrometry indicated that the analgesics had been successfully incorporated into the PLGA microparticles. The analgesic-loaded microparticles possessed low toxicity against human fibroblasts and were able to sustainably elute levobupivacaine, lidocaine, and acemetacin in vitro. Furthermore, electrosprayed microparticles were found to release high levels of lidocaine and acemetacin (well over the minimum therapeutic concentrations) and levobupivacaine at the fracture site of rats for more than 28 days and 12 days, respectively. Analgesic-loaded microparticles demonstrated their effectiveness and sustained performance for pain relief in fracture injuries.

scholarly journals DESIGN AND IN VITRO/IN VIVO EVALUATION OF EXTENDED RELEASE MATRIX TABLETS OF NATEGLINIDE

2018 ◽  
Vol 7 (6) ◽  
Author(s):  
Mohini Sihare ◽  
Rajendra Chouksey
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Release Profile ◽  
Matrix Tablets ◽  
In Vivo Studies ◽  
Release Mechanism ◽  
In Vivo Evaluation

Aim: Nateglinide is a quick acting anti-diabetic medication whose potent activity lasts for a short duration. One of the dangerous side effects of nateglinide administration is rapid hypoglycemia, a condition that needs to be monitored carefully to prevent unnecessary fatalities. The aim of the study was to develop a longer lasting and slower releasing formulation of nateglinide that could be administered just once daily. Methods: Matrix tablets of nateglinide were prepared in combination with the polymers hydroxypropylmethylcellulose (HPMC), eudragits, ethyl cellulose and polyethylene oxide and the formulated drug release patterns were evaluated using in vitro and in vivo studies. Conclusion: Of the seventeen formulated matrix tablets tested, only one formulation labelled HA-2 that contained 15% HPMC K4M demonstrated release profile we had aimed for. Further, swelling studies and scanning electron microscopic analysis confirmed the drug release mechanism of HA-2. The optimized formulation HA-2 was found to be stable at accelerated storage conditions for 3 months with respect to drug content and physical appearance. Mathematical analysis of the release kinetics of HA-2 indicated a coupling of diffusion and erosion mechanisms. In-vitro release studies and pharmacokinetic in vivo studies of HA-2 in rabbits confirmed the sustained drug release profile we had aimed for. Keywords: Hydroxypropylmethylcellulose, Matrix tablets, Nateglinide, Sustained release

scholarly journals Design and Characterization of Combinational Domperidone-Famotidine Floating Drug Delivery System - In vitro and In vivo studies

2021 ◽  
Vol 62 (2) ◽  
pp. 144-162
Author(s):  
Mounika Chidurala ◽  
Raveendra Reddy J
Keyword(s):  
Drug Release ◽  
Oral Administration ◽  
Quality By Design ◽  
Release Kinetics ◽  
Cost Effective ◽  
Fickian Diffusion ◽  
In Vivo Studies ◽  
Pharmacokinetic Studies

Introduction: The drawbacks assosiated with oral administration of drugscan be controlled or minimized by gastro retentive formulations that remain buoyant within the stomach for an extended time by providing prolonged gastric retention and releasethe drug in an exceedingly extended manner thereby improving bioavailability. The current research was to develop and optimize Domperidone and Famotidine floating tablets with extended release by Quality by Design approach. Method: Based on QTPP (Quality Target Product Profile), CQAs (Critical Quality Attributes)wereidentified. Risk analysis by the evaluation of formulation and process parameters showed that optimizing the levels of polymers could reduce high risk to achieve the target profile. A 23factor experimental design with midpoints was selected for statistical analysis and optimization. Results: HPMC K100 and Carbopol 934P had a positive effect while ethyl cellulose demonstrated a negative effect on the selected responses. Drug release kinetics followed the first-order release with Higuchi diffusion and Fickian diffusion. Optimized formula satisfying all the required parameters was selected and evaluated. The predicted response values were in close agreement with experimental response values. Abdominal X-ray imaging after oral administration of the tablets on a healthy rabbit’s stomach confirmed the extended floating behavior with shorter lag time. In vivo, pharmacokinetic studies in rabbits revealed that the optimized formulation exhibited prolonged drug release with enhanced Cmax, tmax, AUCo-t, and t1/2 of an optimized product when compared to the marketed product. Conclusions: It has been concluded that the application of Quality by Design in the formulation and optimization reduced the number of trials to produce a cost-effective formula.

Quality by Design enabled anti-hypertensive Floating drug delivery system by Risk assessment and Design of Experiment (DoE) – In vitro – In vivo correlation studies

2021 ◽  
Vol 16 ◽  
Author(s):  
Mounika Chidurala ◽  
Raveendra Reddy J
Keyword(s):  
Drug Release ◽  
Risk Analysis ◽  
Quality By Design ◽  
Release Kinetics ◽  
Cost Effective ◽  
Fickian Diffusion ◽  
In Vivo Studies ◽  
Pharmacokinetic Studies

Background: The present research aimed to develop and optimize extended-release floating tablets of Sacubitril and Valsartan through Quality by Design (QbD) approach. Risk analysis by formulation assessment and process parameters showed that optimizing the levels of the polymer will minimize high risk to meet the target profile. A two (2) level three (3) full factorial experimental design along with midpoints was carefully chosen for optimization and statistical analysis. Based on the literature, the independent and dependent variables were selected. Results: HPMC K100, Carbopol 934P had a positive effect, whereas Ethylcellulose had a negative effect on Floating time, drug release at 2 h, drug release at 12 h and, 50% responses. Drug release kinetics followed the first-order release with Higuchi and Fickian diffusion. Contour and overlay plots were utilized for an assortment of design space and optimized formula. ANOVA results of all the factors exhibited significance at p<0.05. Abdominal X-ray imaging of the optimized tablets on healthy rabbit’s stomach confirmed the floating behavior for more than 12 h. In vivo pharmacokinetic studies in rabbits showed that the optimized formulation exhibited prolonged and extended drug release with improved Cmax, tmax, AUCo-t, and t1/2 of test product when compared to marketed product. IVIVC model was developed by using dissolution data of in vitro and pharmacokinetics data of in-vivo by de-convolution method (Wagner-Nelson method). Conclusion: The Quality by Design implementation in the formulation and optimization abridged the number of trials to produce a cost-effective formula. In vivo studies confirmed that the formula was successfully developed with extended floating time (12 h) and drug release by risk analysis and experimental designs. Level A correlation was observed which confirmed a good correlation between in vitro and in vivo data.

scholarly journals THER-15. DEVELOPING TUMOR-HOMING CYTOTOXIC HUMAN INDUCED NEURAL STEM CELL THERAPY FOR BRAIN METASTASES

2019 ◽  
Vol 1 (Supplement_1) ◽  
pp. i13-i14
Author(s):  
Alison Mercer-Smith ◽  
Wulin Jiang ◽  
Juli Bago ◽  
Simon Khagi ◽  
Carey Anders ◽  
...  
Keyword(s):  
Breast Cancer ◽  
Brain Metastases ◽  
Drug Carrier ◽  
Human Fibroblasts ◽  
Genetically Engineered ◽  
In Vivo Studies ◽  
Tumor Homing ◽  
The Brain

Abstract INTRODUCTION: Non-small cell lung cancer (NSCLC) and breast cancer are the most common cancers that metastasize to the brain. New therapies are needed to seek out and eradicate metastases. Genetically engineered neural stem cells (NSCs) have shown unique tumor-homing capacity, allowing them to deliver cytotoxic proteins directly to tumors. An ideal NSC drug carrier would be readily available and autologous. We have transdifferentiated human fibroblasts into induced NSCs (hiNSCs) that home to tumors and engineered the hiNSCs to release the cytotoxic protein TRAIL. Here we used intracerebroventricular (ICV) injections to deliver hiNSCs to metastatic foci. METHODS: We performed an in vitro efficacy co-culture assay, used in vivo studies to determine the migration, persistence, and efficacy of therapeutic hiNSCs against H460 NSCLC and triple-negative breast cancer MB231-Br tumors in the brain. Following the establishment of tumors in the brains of nude mice, hiNSCs were injected directly into the tumor or the ventricle contralateral to the site of tumor. The migration and persistence of hiNSCs was investigated by following the bioluminescence of the hiNSCs. The therapeutic efficacy of the hiNSCs was determined by following the bioluminescece of the tumor. RESULTS/CONCLUSION: Co-culture results demonstrated that hiNSC therapy reduced the viability of H460 and MB231-Br up to 75% and 99.8% respectively compared to non-treated controls. ICV-administered hiNSC serial imaging show that cells persisted for more than one week. Fluorescent analysis of tissue sections showed that hiNSCs co-localized with lateral and a contralateral tumors within 7 days. Using H460 and MB231-Br models, kinetic tracking of intracranial tumor volumes showed intratumoral or ICV-injected therapeutic hiNSCs reduced the growth rate of brain tumors by 31-fold and 3-fold, respectively. This work demonstrates for the first time that we can effectively deliver personalized cytotoxic tumor-homing cells through the ventricles to target brain metastases.

DESIGN OF PRONIOSOMAL GEL CONTAINING EUGENOL AS AN ANTIFUNGAL AGENT FOR THE TREATMENT OF ORAL CANDIDIASIS

INDIAN DRUGS ◽  
2018 ◽  
Vol 55 (09) ◽  
pp. 55-57
Author(s):  
T. S Vishnu ◽  
◽  
A. Dubey ◽  
G.S Ravi ◽  
S. Hebbar
Keyword(s):  
Antifungal Activity ◽  
Drug Release ◽  
Release Kinetics ◽  
Oral Candidiasis ◽  
In Vivo Studies ◽  
Compatibility Study ◽  
In Vitro Drug Release ◽  
Release Study

The objective of this study was to design and investigate the antifungal activity of proniosomal gel of eugenol for the treatment of oral candidiasis. The proniosomal gel was prepared by coacervation phase separation method using different surfactants like spans 20, 60, 80, soya lecithin and cholesterol. The proniosomal gel formulations were evaluated for visual inspection, pH detection, viscosity, spreadability, in vitro drug release and kinetics study, and in vivo studies. The compatibility study indicated that the drug and the excipients were compatible with each other. The results showed that pH, viscosity and spreadability were all acceptable for topical preparation. In vitro drug release study and drug release kinetics were conducted to check the release study and drug release patterns of the formulation. Amongst the formulations, an optimized formulation was selected to conduct an in vivo study. Candida albicans was used to induce oral candidiasis for the evaluation of therapeutic efficacy of proniosomal gel in immunosuppressed rats. Activity was analysed by microbiological and histopathological techniques and was compared with the marketed product. It is evident from the study that the proniosomal gel shows sustained release trend with strong antifungal activity.

Formulation and Evaluation of Pimozide Buccal Mucoadhesive Patches

1970 ◽  
Vol 2 (4) ◽  
pp. 739-747
Author(s):  
Biswajit Basu ◽  
Kevin Garala ◽  
Thimmasetty J
Keyword(s):  
Release Kinetics ◽  
In Vitro Release ◽  
In Vivo Studies ◽  
Poly Vinyl Alcohol ◽  
Content Uniformity ◽  
In Vivo Absorption ◽  
Systemic Drug Delivery ◽  
Vitro Release

Within the oral mucosal cavity, the buccal region offers an attractive route of administration for systemic drug delivery. Pimozide patches were prepared using HPMC (15 & 47 cPs), carbopol 934, poly vinyl alcohol, and poly vinyl pyrolidone. FTIR and UV spectroscopic methods revealed that there is no interaction between pimozide and polymers. The patches were evaluated for their thickness uniformity, folding endurance, weight uniformity, content uniformity, swelling behaviour, tensile strength, and surface pH. In vitro release studies of pimozide-loaded patches in phosphate buffer (pH, 6.6) exhibited drug release in the range of 55.32 % to 97.49 % in 60 min. Data of in vitro release from patches were fit in to different equations and kinetic models to explain release kinetics. The models used were zero and first-order equations, Hixon-Crowell, Higuchi and Korsmeyer-Peppas models. In vivo absorption of pimozide from all the patches ranged from 47.96 % to 83.42 % in 60 min in human volunteers. In vivo studies in rabbits showed 85.97% of drug absorption from HPMC-15 cPs patch in 60 min. Good correlation among in vitro release and in vivo absorption of pimozide was observed

scholarly journals Extended pain relief achieved by analgesic-eluting biodegradable nanofibers in the Nuss procedure: in vitro and in vivo studies

2018 ◽  
Vol Volume 13 ◽  
pp. 8355-8364 ◽  
Author(s):  
Kuo-Sheng Liu ◽  
Wei-Hsun Chen ◽  
Cheng-Hung Lee ◽  
Yong-Fong Su ◽  
Shih-Jung Liu
Keyword(s):  
Pain Relief ◽  
In Vivo Studies ◽  
Nuss Procedure

scholarly journals Development and Optimization of Chitosan Nanoparticle-Based Intranasal Vaccine Carrier

Molecules ◽  
2021 ◽  
Vol 27 (1) ◽  
pp. 204
Author(s):  
Xiaoyi Gao ◽  
Nan Liu ◽  
Zengming Wang ◽  
Jing Gao ◽  
Hui Zhang ◽  
...  
Keyword(s):  
Chitosan Nanoparticles ◽  
Vaccine Delivery ◽  
Lavage Fluid ◽  
In Vivo Studies ◽  
Modified Chitosan ◽  
Chitosan Nanoparticle ◽  
Low Toxicity ◽  
Intranasal Vaccine

Chitosan is a natural polysaccharide, mainly derived from the shell of marine organisms. At present, chitosan has been widely used in the field of biomedicine due to its special characteristics of low toxicity, biocompatibility, biodegradation and low immunogenicity. Chitosan nanoparticles can be easily prepared. Chitosan nanoparticles with positive charge can enhance the adhesion of antigens in nasal mucosa and promote its absorption, which is expected to be used for intranasal vaccine delivery. In this study, we prepared chitosan nanoparticles by a gelation method, and modified the chitosan nanoparticles with mannose by hybridization. Bovine serum albumin (BSA) was used as the model antigen for development of an intranasal vaccine. The preparation technology of the chitosan nanoparticle-based intranasal vaccine delivery system was optimized by design of experiment (DoE). The DoE results showed that mannose-modified chitosan nanoparticles (Man-BSA-CS-NPs) had high modification tolerance and the mean particle size and the surface charge with optimized Man-BSA-CS-NPs were 156 nm and +33.5 mV. FTIR and DSC results confirmed the presence of Man in Man-BSA-CS-NPs. The BSA released from Man-BSA-CS-NPs had no irreversible aggregation or degradation. In addition, the analysis of fluorescence spectroscopy of BSA confirmed an appropriate binding constant between CS and BSA in this study, which could improve the stability of BSA. The cell study in vitro demonstrated the low toxicity and biocompatibility of Man-BSA-CS-NPs. Confocal results showed that the Man-modified BSA-FITC-CS-NPs promote the endocytosis and internalization of BSA-FITC in DC2.4 cells. In vivo studies of mice, Man-BSA-CS-NPs intranasally immunized showed a significantly improvement of BSA-specific serum IgG response and the highest level of BSA-specific IgA expression in nasal lavage fluid. Overall, our study provides a promising method to modify BSA-loaded CS-NPs with mannose, which is worthy of further study.

scholarly journals Development of nasal HPV vaccine formulations

2016 ◽  
Author(s):  
D. Krishnakumar ◽  
K. S. Jaganathan
Keyword(s):  
Cervical Cancer ◽  
Zeta Potential ◽  
Nasal Delivery ◽  
Cold Chain ◽  
In Vivo Studies ◽  
Secretory Iga ◽  
Plga Microparticles ◽  
Hpv Types

Cervical cancer is the second most cancer in women worldwide with over 500000 new cases and 275000 deaths being registered every year. With nearly 73000 women dying every year, India now tops the world in cervical cancer deaths. India represents 26.4% of all women dying of cervical cancer globally. Cervical cancer estimated to be responsible for about 5% of human cancers worldwide. Currently available vaccines may not provide complete protection against all HPV types as the protection is primarily type specific. Furthermore, the available vaccines are delivered via intramuscular route and require three doses and require cold chain supply which increases the cost of vaccine. Therefore a single dose vaccine delivered via non-invasive route (nasal) that protects against multiple HPV types would be a cost effective and better alternative to the currently available HPV vaccines. The main objective of this study was to prepare HPV antigen loaded poly (lactic-co-glycolic acid) (PLGA) and Tri Methyl Chitosan (TMC) coated PLGA microparticles and compare their efficacy as nasal vaccine. The developed formulations were characterized for size, zeta potential, entrapment efficiency, mucin adsorption ability, in vitro and in vivo studies. PLGA microparticles demonstrated negative zeta potential whereas PLGA-TMC microparticles showed higher positive zeta potential. The protein loading efficiency was found as above 80%. Results indicated that PLGA-TMC microparticles demonstrated substantially higher mucin adsorption when compared to PLGA microparticles. HPV antigen encapsulated in PLGA-TMC particles elicited a significantly higher secretory (IgA) immune response compared to that encapsulated in PLGA particles. Present study demonstrates that PLGA-TMC microparticles with specific size range can be a better carrier adjuvant for nasal subunit vaccines. Surface modified PLGA microparticles proved great potential as a nasal delivery system for HPV infections where systemic and mucosal responses are necessary particularly in conditions after viral pathogens invade the host through the mucosal surface.

Sign in / Sign up

Export Citation Format

Share Document