scholarly journals How Electrical Heterogeneity Parameters of Ion-Exchange Membrane Surface Affect the Mass Transfer and Water Splitting Rate in Electrodialysis

2020 ◽  
Vol 21 (3) ◽  
pp. 973 ◽  
Author(s):  
Svetlana Zyryanova ◽  
Semyon Mareev ◽  
Violetta Gil ◽  
Elizaveta Korzhova ◽  
Natalia Pismenskaya ◽  
...  
Keyword(s):  
Mass Transfer ◽  
Ion Exchange ◽  
Water Splitting ◽  
Transfer Rate ◽  
Membrane Surface ◽  
Mass Transfer Rate ◽  
Anion Exchange Membranes ◽  
Experimental Conditions ◽  
Electrospinning Technique ◽  
Diffusion Layer Thickness

Electrodialysis (ED) has been demonstrated as an effective membrane method for desalination, concentration, and separation. Electroconvection (EC) is a phenomenon which can essentially increase the mass transfer rate and reduce the undesirable water splitting effect. Efforts by a number of researchers are ongoing to create conditions for developing EC, in particular, through the formation of electrical heterogeneity on the membrane surface. We attempt, for the first time, to optimize the parameters of surface electrical heterogeneity for ion-exchange membranes used in a laboratory ED cell. Thirteen different patterns on the surface of two Neosepta anion-exchange membranes, AMX and AMX-Sb, were tested. Low-conductive fluoropolymer spots were formed on the membrane surface using the electrospinning technique. Spots in the form of squares, rectangles, and circles with different sizes and distances between them were applied. We found that the spots’ shape did not have a visible effect. The best effect, i.e., the maximum mass transfer rate and the minimum water splitting rate, was found when the spots’ size was close to that of the diffusion layer thickness, δ (about 250 μm in the experimental conditions), and the distance between the spots was slightly larger than δ, such that the fraction of the screened surface was about 20%.

scholarly journals Enhancing Ion Transfer in Overlimiting Electrodialysis of Dilute Solutions by Modifying the Surface of Heterogeneous Ion-Exchange Membranes

2012 ◽  
Vol 2012 ◽  
pp. 1-11 ◽  
Author(s):  
Natalia Pismenskaya ◽  
Nadezhda Melnik ◽  
Ekaterina Nevakshenova ◽  
Kseniya Nebavskaya ◽  
Victor Nikonenko
Keyword(s):  
Mass Transfer ◽  
Surface Layer ◽  
Ion Exchange ◽  
Cation Exchange ◽  
Water Splitting ◽  
Anion Exchange ◽  
Membrane Surface ◽  
Anion Exchange Membrane ◽  
Cation Exchange Membrane ◽  
Exchange Membrane

The desalination of dilute NaCl solutions with heterogeneous Russian commercial and modified ion-exchange membranes was studied in a laboratory cell imitating desalination channels of large-scale electrodialysers. The modification was made by casting a thin film of a Nafion-type material on the surface of cation-exchange membrane, and by processing with a strong polyelectrolyte the surface of anion-exchange membrane. It was shown that the modifications resulted in an increase of mass transfer coefficient and in a decrease in water splitting rate, both by up to 2 times. The effect of mass transfer growth is explained by higher surface hydrophobicity of the modified membrane that enhances electroconvection. The decrease in water splitting rate in the case of cation-exchange membrane is due to homogenization of its surface layer. In the case of anion-exchange membrane the effect is due to grafting of quaternary ammonium bases onto the original membrane surface layer. The suppression of water splitting favors development of electroconvection. In turn, intensive electroconvection contributes to deliver salt ions to membrane surface and thus reduces water splitting.

Free Convective Mass Transfer at Isosceles Triangular Surfaces of Varying Inclination

2003 ◽  
Vol 68 (11) ◽  
pp. 2080-2092 ◽  
Author(s):  
Martin Keppert ◽  
Josef Krýsa ◽  
Anthony A. Wragg
Keyword(s):  
Mass Transfer ◽  
Transfer Rate ◽  
Mass Transfer Rate ◽  
Mass Transfer Process ◽  
Sulfate Solution ◽  
Convective Mass Transfer ◽  
Varying Length ◽  
Inclined Surface ◽  
Vertical Case ◽  
Limiting Diffusion Current

The limiting diffusion current technique was used for investigation of free convective mass transfer at down-pointing up-facing isosceles triangular surfaces of varying length and inclination. As the mass transfer process, copper deposition from acidified copper(II) sulfate solution was used. It was found that the mass transfer rate increases with inclination from the vertical to the horizontal position and decreases with length of inclined surface. Correlation equations for 7 angles from 0 to 90° were found. The exponent in the ShL-RaL correlation ranged from 0.247 for the vertical case, indicating laminar flow, to 0.32 for inclinations of 60 to 90°, indicating mixed or turbulent flow. The general correlation ShL = 0.358(RaL sin θ)0.30 for the RaL sin θ range from 7 × 106 to 2 × 1011 and inclination range from 15 to 90° was obtained.

Distributed mass transfer rate for modelling the leaching of porous granular materials containing soluble pollutants

2000 ◽  
Vol 55 (7) ◽  
pp. 1257-1267 ◽  
Author(s):  
Tiruta-Barna Ligia ◽  
Barna Radu ◽  
Moszkowicz Pierre ◽  
Bae Hae-Ryong
Keyword(s):  
Mass Transfer ◽  
Granular Materials ◽  
Transfer Rate ◽  
Mass Transfer Rate

Enhancement of formic acid production from CO2 in formate dehydrogenase reaction using nanoparticles

RSC Advances ◽  
2016 ◽  
Vol 6 (111) ◽  
pp. 109978-109982 ◽  
Author(s):  
Young-Kee Kim ◽  
Sung-Yeob Lee ◽  
Byung-Keun Oh
Keyword(s):  
Mass Transfer ◽  
Formic Acid ◽  
Acid Production ◽  
Transfer Rate ◽  
Formate Dehydrogenase ◽  
Mass Transfer Rate ◽  
Liquid Mass ◽  
Dehydrogenase Reaction ◽  
Liquid Mass Transfer ◽  
Mesoporous Nanoparticles

In an enzyme process using a gas substrate, the enhanced gas liquid mass transfer rate of the gas substrate by methyl-functionalized mesoporous nanoparticles could improve the productivity.

Sign in / Sign up

Export Citation Format

Share Document