scholarly journals Key Factors for A One-Pot Enzyme Cascade Synthesis of High Molecular Weight Hyaluronic Acid

2019 ◽  
Vol 20 (22) ◽  
pp. 5664 ◽  
Author(s):  
Gottschalk ◽  
Zaun ◽  
Eisele ◽  
Kuballa ◽  
Elling
Keyword(s):  
Molecular Weight ◽  
Hyaluronic Acid ◽  
Pasteurella Multocida ◽  
Ph Value ◽  
Key Factors ◽  
One Pot ◽  
Data Set ◽  
In Vitro Synthesis ◽  
Enzyme Cascade

In the last decades, interest in medical or cosmetic applications of hyaluronic acid (HA) has increased. Size and dispersity are key characteristics of biological function. In contrast to extraction from animal tissue or bacterial fermentation, enzymatic in vitro synthesis is the choice to produce defined HA. Here we present a one-pot enzyme cascade with six enzymes for the synthesis of HA from the cheap monosaccharides glucuronic acid (GlcA) and N-acetylglucosamine (GlcNAc). The combination of two enzyme modules, providing the precursors UDP–GlcA and UDP–GlcNAc, respectively, with hyaluronan synthase from Pasteurella multocida (PmHAS), was optimized to meet the kinetic requirements of PmHAS for high HA productivity and molecular weight. The Mg2+ concentration and the pH value were found as key factors. The HA product can be tailored by different conditions: 25 mM Mg2+ and 2-[4-(2-hydroxyethyl)piperazin-1-yl]ethanesulfonic acid (HEPES)-NaOH pH 8 result into an HA product with high Mw HA (1.55 MDa) and low dispersity (1.05). Whereas with 15 mM Mg2+ and HEPES–NaOH pH 8.5, we reached the highest HA concentration (2.7 g/L) with a yield of 86.3%. Our comprehensive data set lays the basis for larger scale enzymatic HA synthesis.

scholarly journals Photocuring Hyaluronic Acid/Silk Fibroin Hydrogel Containing Curcumin Loaded CHITOSAN Nanoparticles for the Treatment of MG-63 Cells and ME3T3-E1 Cells

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2302
Author(s):  
Qingwen Yu ◽  
Zhiyuan Meng ◽  
Yichao Liu ◽  
Zehao Li ◽  
Xing Sun ◽  
...  
Keyword(s):  
Hyaluronic Acid ◽  
Bone Regeneration ◽  
Water Uptake ◽  
Silk Fibroin ◽  
Bone Repair ◽  
Ph Value ◽  
Chitosan Nanoparticles ◽  
Vitro Assay ◽  
Long Term Treatment

After an osteosarcoma excision, recurrence and bone defects are significant challenges for clinicians. In this study, the curcumin (Cur) loaded chitosan (CS) nanoparticles (CCNP) encapsulated silk fibroin (SF)/hyaluronic acid esterified by methacrylate (HAMA) (CCNPs-SF/HAMA) hydrogel for the osteosarcoma therapy and bone regeneration was developed by photocuring and ethanol treatment. The micro or nanofibers networks were observed in the CCNPs-SF/HAMA hydrogel. The FTIR results demonstrated that alcohol vapor treatment caused an increase in β-sheets of SF, resulting in the high compression stress and Young’s modulus of CCNPs-SF/HAMA hydrogel. According to the water uptake analysis, SF caused a slight decrease in water uptake of CCNPs-SF/HAMA hydrogel while CCNPs could enhance the water uptake of it. The swelling kinetic results showed that both the CCNPs and the SF increased the swelling ratio of CCNPs-SF/HAMA hydrogel. The accumulative release profile of CCNPs-SF/HAMA hydrogel showed that the release of Cur from CCNPs-SF/HAMA hydrogel was accelerated when pH value was decreased from 7.4 to 5.5. Besides, compared with CCNPs, the CCNPs-SF/HAMA hydrogel had a more sustainable drug release, which was beneficial for the long-term treatment of osteosarcoma. In vitro assay results indicated that CCNPs-SF/HAMA hydrogel with equivalent Cur concentration of 150 μg/mL possessed both the effect of anti-cancer and promoting the proliferation of osteoblasts. These results suggest that CCNPs-SF/HAMA hydrogel with superior physical properties and the bifunctional osteosarcoma therapy and bone repair may be an excellent candidate for local cancer therapy and bone regeneration.

scholarly journals Mesoporous Properties of Bioactive Glass Synthesized by Spray Pyrolysis with Various Polyethylene Glycol and Acid Additions

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 618
Author(s):  
Tzu-Yu Peng ◽  
Pei-Yun Tsai ◽  
May-Show Chen ◽  
Yuichi Mine ◽  
Shan-Hua Wu ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Polyethylene Glycol ◽  
Bioactive Glass ◽  
Spray Pyrolysis ◽  
Mesoporous Structure ◽  
High Specific Surface Area ◽  
Process Time ◽  
In Vitro Bioactivity ◽  
One Pot

Mesoporous bioactive glass (MBG) has a high specific surface area, promoting the reaction area, thereby improving the bioactivity; thus, MBG is currently gaining popularity in the biomaterial field. Spray pyrolysis (SP) is a one-pot process that has the advantages of shorter process time and better particle bioactivity, therefore, MBG was prepared by SP process with various polyethylene glycol (PEG, molecular weight ranged from 2000–12,000) and acid (HCl and CH3COOH) additions. In vitro bioactivity and mesoporous properties of the so-obtained MBG were investigated. The experimental results showed that all the MBG exhibited amorphous and mesoporous structure. Increasing the molecular weight of PEG can improve the mesoporous structure and bioactivity of MBG. Whereas optimized MBG was prepared with suitable concentration of PEG and CH3COOH. In the present work, MBG synthesized via spray pyrolysis by adding 5 g of PEG with a molecular weight of 12,000 and 50 mL of CH3COOH exhibited the best in vitro bioactivity and mesoporous structure.

scholarly journals Enhancing the biocompatibility of siliconepolycarbonate urethane based implant materials

2019 ◽  
Vol 5 (1) ◽  
pp. 453-455 ◽  
Author(s):  
Kiriaki Athanasopulu ◽  
Larysa Kutuzova ◽  
Joana Thiel ◽  
Günter Lorenz ◽  
Ralf Kemkemer
Keyword(s):  
Molecular Weight ◽  
Cell Proliferation ◽  
Hyaluronic Acid ◽  
Cell Growth ◽  
Block Copolymers ◽  
Cytotoxic Potential ◽  
Implant Surface ◽  
Characterization Methods ◽  
Hard Segments

AbstractPolyurethane-bases block copolymers (TPCUs) are block-copolymers with systematically varied soft and hard segments. They have been suggested to serve as material for chondral implants in joint regeneration. Such applications may require the adhesion of chondrocytes to the implant surface, facilitating cell growth while keeping their phenotype. Thus, aims of this work were (i) to modify the surface of soft biostable polyurethane-based model implants (TPCU and TSiPCU) with high-molecular weight hyaluronic acid (HA) using an optimized multistep strategy of immobilization, and (ii) to evaluate bioactivity of the modified TPCUs in vitro. Our results show no cytotoxic potential of the TPCUs. HAbioactive molecules (Mw =700kDa) were immobilized onto the polyurethane surface via polyethylenimine (PEI) spacers, and modifications were confirmed by several characterization methods. Tests with porcine chondrocytes indicated the potential of the TPCU-HA for inducing enhanced cell proliferation.

In vitro synthesis of glycosaminoglycans in endocrine ophthalmopathy

1992 ◽  
Vol 127 (5) ◽  
pp. 397-402 ◽  
Author(s):  
G Kahaly ◽  
C Stover ◽  
J Beyer ◽  
E Otto
Keyword(s):  
Hyaluronic Acid ◽  
Acid Concentration ◽  
Cetylpyridinium Chloride ◽  
Acid Synthesis ◽  
Cell Mediated Immunity ◽  
Glycosaminoglycan Synthesis ◽  
In Vitro Synthesis ◽  
Significant Difference ◽  
Endocrine Ophthalmopathy

The effects of humoral and cell-mediated immunity on the glycosaminoglycan synthesis of retrobulbar fibroblasts was evaluated in patients with endocrine ophthalmopathy. After incubation with IgG and sera, secreted glycosaminoglycans, radiolabeled with D-6-3H-glucosamine and 35sulfate, were precipitated with cetylpyridinium chloride and ethanol. Hyaluronic acid synthesis of human retrobulbar fibroblasts after incubation with sera and IgG and after co-culture with lymphocytes was assessed by means of a radiometric test. Patients' IgG, compared to controls', accounted for a higher secretory stimulation of porcine retrobulbar fibroblasts (as measured by cetylpyridinium chloride precipitation) after 24 and 48 h. Contrasting with 24 h incubation time, glycosaminoglycan values after 48 h were increased two to threefold. Patients' and controls' sera caused earlier and stronger, yet indistinguishable glycosaminoglycan production. Non-sulfated hyaluronic acid was the preponderant glycosaminoglycan secreted into the media by retrobulbar fibroblasts. As assessed with the radiometric test, incubation with patients' and controls' sera and IgG did not reveal a significant difference in stimulating the hyaluronic synthesis of patients' and controls' retrobulbar fibroblasts. When measuring the hyaluronic acid synthesis of controls' and patients' retrobulbar fibroblasts after co-cultivation of lymphocytes, however, patients' lymphocytes had a marked ability to increase the hyaluronic acid concentration compared to controls' lymphocytes. The hyaluronic acid concentration after incubation of a patient's retrobulbar fibroblasts with autologous lymphocytes was markedly more elevated than the intrinsic hyaluronic acid production of retrobulbar fibroblasts. In conclusion, though a significant in vitro influence of patients' IgG and sera on the glycosaminoglycan release of both porcine and human (patients' as well as controls') retrobulbar fibroblasts could not be observed in this study, the indications of a marked stimulatory influence of lymphocytes on the hyaluronic acid secretion of retrobulbar fibroblasts demand further investigation.

scholarly journals Hyaluronic Acid Derivative Molecular Weight-Dependent Synthesis and Antimicrobial Effect of Hybrid Silver Nanoparticles

2021 ◽  
Vol 22 (24) ◽  
pp. 13428
Author(s):  
Guillem Ferreres ◽  
Sílvia Pérez-Rafael ◽  
Juan Torrent-Burgués ◽  
Tzanko Tzanov
Keyword(s):  
Molecular Weight ◽  
Silver Nanoparticles ◽  
Hyaluronic Acid ◽  
Mammalian Cells ◽  
Antimicrobial Effect ◽  
Mechanistic Study ◽  
Ag Nps ◽  
Antimicrobial Function ◽  
Reduced Toxicity

Silver nanoparticles (Ag NPs) appeared as promising antimicrobial candidates to face the development of antibiotic resistance. Although reported as toxic towards mammalian cells, their combination with biomolecules have shown reduced toxicity, while maintaining the antimicrobial function. Herein, hyaluronic acid (HA) with low (40 kDa), medium (200 and 600 kDa) and high (2 MDa) molecular weight (Mw) was modified with adipic acid dihydrazide (ADH) and used as reducing and capping agents to synthesise antimicrobial hybrid Ag NPs. The Mw of the polymer played a crucial role in the morphology, size and antibacterial activity of the Ag NPs. The 600 and 200 kDa HA-ADH-Ag NPs were able to reduce the Escherichia coli and Staphylococcus aureus concentration by more than 3 logs, while the 40 kDa NPs reached ~2 logs reduction. The 2 MDa HA-ADH failed to form homogenous NPs with strong bactericidal activity. A mechanistic study of the interaction with a model bacterial membrane using Langmuir isotherms confirmed the greater interaction between bacteria and higher Mw polymers and the effect of the NP’s morphology. The nanocomposites low toxicity to human skin cells was demonstrated in vitro, showing more than 90% cell viability after incubation with the NPs.

In vitro synthesis of glycogen: the structure, properties, and physiological function of enzymatically-synthesized glycogen

Biologia ◽  
2011 ◽  
Vol 66 (3) ◽  
Author(s):  
Hideki Kajiura ◽  
Hiroki Takata ◽  
Tsunehisa Akiyama ◽  
Ryo Kakutani ◽  
Takashi Furuyashiki ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Chain Length ◽  
Large Scale ◽  
Glycogen Synthesis ◽  
Average Molecular Weight ◽  
Spherical Particles ◽  
Average Chain Length ◽  
Scale Production ◽  
In Vitro Synthesis

AbstractThis review describes a new enzymatic method for in vitro glycogen synthesis and its structure and properties. In this method, short-chain amylose is used as the substrate for branching enzymes (BE, EC 2.4.1.18). Although a kidney bean BE and Bacillus cereus BE could not synthesize high-molecular weight glucan, BEs from 6 other bacterial sources produced enzymatically synthesized glycogen (ESG). The BE from Aquifex aeolicus was the most suitable for the production of glycogen with a weight-average molecular weight (M w) of 3,000–30,000 k. The molecular weight of the ESG is controllable by changing the concentration of the substrate amylose. Furthermore, the addition of amylomaltase (AM, EC 2.4.1.25) significantly enhanced the efficiency of this process, and the yield of ESG reached approximately 65%. Typical preparations of ESG obtained by this method were subjected to structural analyses. The average chain length, interior chain length, and exterior chain length of the ESGs were 8.2–11.6, 2.0–3.3, and 4.2–7.6, respectively. Transmission electron microscopy and intrinsic viscosity measurement showed that the ESG molecules formed spherical particles. Unlike starch, the ESGs were barely degraded by pullulanase. Solutions of ESG were opalescent (milky-white and slightly bluish), and gave a reddishbrown color on the addition of iodine. These analyses revealed that ESG shares similar molecular shapes and solution properties with natural-source glycogen. Moreover, ESG had macrophage-stimulating activity and its activity depends on the molecular weight of ESG. We successfully achieved large scale production of ESG. ESG could lead to new industrial applications, such as in the food, chemical, and pharmaceutical fields.

scholarly journals Optimization of enzyme cascades for the in vitro synthesis of hyaluronic acid

2018 ◽  
Vol 90 (9) ◽  
pp. 1291-1291
Author(s):  
J. Gottschalk ◽  
A. Eisele ◽  
L. Elling
Keyword(s):  
Hyaluronic Acid ◽  
In Vitro Synthesis ◽  
Enzyme Cascades
Sign in / Sign up

Export Citation Format

Share Document