scholarly journals A Post-Scan Point Cloud Colorization Method for Cultural Heritage Documentation

2021 ◽  
Vol 10 (11) ◽  
pp. 737
Author(s):  
Ting On Chan ◽  
Hang Xiao ◽  
Lixin Liu ◽  
Yeran Sun ◽  
Tingting Chen ◽  
...  
Keyword(s):  
Cultural Heritage ◽  
Point Cloud ◽  
Laser Scanning ◽  
Simulation Experiment ◽  
Point Clouds ◽  
3D Laser Scanning ◽  
Color Information ◽  
Efficient Point ◽  
Camera System ◽  
Planar Feature

The 3D laser scanning technique is important for cultural heritage documentation. The laser itself normally does not carry any color information, so it usually requires an embedded camera system to colorize the point cloud. However, when the embedded camera system fails to perform properly under some external interferences, a post-scan colorization method is always desired to improve the point cloud visuality. This paper presents a simple but efficient point cloud colorization method based on a point-to-pixel orthogonal projection under an assumption that the orthogonal and perspective projections can produce similar effects for a planar feature as long as the target-to-camera distance is relatively short (within several meters). This assumption was verified by a simulation experiment, and the results show that only approximately 5% of colorization error was found at a target-to-camera distance of 3 m. The method was further verified with two real datasets collected for the cultural heritage documentation. The results showed that the visuality of the point clouds for two giant historical buildings had been greatly improved after applying the proposed method.

scholarly journals Simultaneous Wood Defect and Species Detection with 3D Laser Scanning Scheme

2016 ◽  
Vol 2016 ◽  
pp. 1-6 ◽  
Author(s):  
Zhao Peng ◽  
Li Yue ◽  
Ning Xiao
Keyword(s):  
Wood Species ◽  
Wood Surface ◽  
Point Cloud ◽  
Laser Scanning ◽  
Species Recognition ◽  
Quantitative Detection ◽  
3D Laser Scanning ◽  
Color Information ◽  
Integration Algorithm ◽  
Detection Scheme

Wood grading and wood price are mainly connected with the wood defect and wood species. In this paper, a wood defect quantitative detection scheme and a wood species qualitative identification scheme are proposed simultaneously based on 3D laser scanning point cloud. First, an Artec 3D scanner is used to scan the wood surface to get the 3D point cloud. Each 3D point contains its X, Y, and Z coordinate and its RGB color information. After preprocessing, the Z coordinate value of current point is compared with the set threshold to judge whether it is a defect point (i.e., cavity, worm tunnel, and crack). Second, a deep preferred search algorithm is used to segment the retained defect points marked with different colors. The integration algorithm is used to calculate the surface area and volume of every defect. Finally, wood species identification is performed with the wood surface’s color information. The color moments of scanned points are used for classification, but the defect points are not used. Experiments indicate that our scheme can accurately measure the surface areas and volumes of cavity, worm tunnel, and crack on wood surface with measurement error less than 5% and it can also reach a wood species recognition accuracy of 95%.

scholarly journals EQUAL PROPORTION REPRODUCTION METHOD OF GROTTO BASED ON POINT CLOUD

2019 ◽  
Vol XLII-2/W15 ◽  
pp. 1215-1219
Author(s):  
P. Wei ◽  
A. Li ◽  
M. Hou ◽  
L. Zhu ◽  
D. Xu ◽  
...  
Keyword(s):  
3D Printing ◽  
Point Cloud ◽  
Laser Scanning ◽  
New Technologies ◽  
Rapid Development ◽  
Point Clouds ◽  
Equal Proportion ◽  
3D Laser Scanning ◽  
Printing Technology ◽  
3D Printing Technology

<p><strong>Abstract.</strong> The rapid development of 3D laser scanning and 3D printing technology provides new technologies and ideas for cultural relic protection and reproduction. Aiming at the requirement of equal proportional reproduction of large-scale grottoes, this paper takes the point cloud data of the 18th Cave of Yungang Grottoes obtained by 3D laser scanning as an example, and proposes a data processing and reproduction block partitioning method for equal proportion reproduction. The Cyclone, Geomagic and AutoCAD software were used to construct the 3D model of the grotto, and the 3D printing technology was used to realize the secondary design and model print. Among them, the research focuses on the modeling of massive point clouds and the method of model partitioning based on voxels. It can meet the requirements of movable and assembly while realizing the equal proportional reproduction of the whole grotto. The research results and application can be a good reference for the future grotto reproduction work.</p>

scholarly journals INDOOR MAPPING OF A COMPLEX CULTURAL HERITAGE SCENE USING TLS AND HMLS LASER SCANNING

2021 ◽  
Vol XLIII-B2-2021 ◽  
pp. 605-612
Author(s):  
V. E. Oniga ◽  
A. I. Breaban ◽  
E. I. Alexe ◽  
C. Văsii
Keyword(s):  
Standard Deviation ◽  
Cultural Heritage ◽  
Long Range ◽  
Interior Design ◽  
Point Cloud ◽  
Laser Scanning ◽  
Laser Scanner ◽  
Point Clouds ◽  
Acquisition Time ◽  
Wide Range

Abstract. Indoor mapping and modelling is an important research subject with application in a wide range of domains including interior design, real estate, cultural heritage conservation and restoration. There are multiple sensors applicable for 3D indoor modelling, but the laser scanning technique is frequently used because of the acquisition time, detailed information and accuracy. In this paper, the efficiency of the Maptek I-Site 8820 terrestrial scanner, which is a long-range laser scanner and the accuracy of a HMLS point cloud acquired with a mobile scanner, namely GeoSlam Zeb Horizon were tested for indoor mapping. Aula Magna “Carmen Silva” of the “Gheorghe Asachi” Technical University of Iasi is studied in the current paper since the auditorium interior creates a distinct environment that combines complex geometric structures with architectural lighting and for preserving its great cultural value, the monument has a national historical significance. The registration process of the TLS point clouds was done using two methods: a semi-automatic one with artificial targets and a completely automatic one, based on Iterative Closest Point (ICP) algorithm. The resulted TLS point cloud was analysed in relation to the HMLS point cloud by computing the M3C2 (Multiscale Model to Model Cloud Comparison), obtaining a standard deviation of 2.1 cm and by investigating the Hausdorff distances from which resulted a standard deviation (σ) of 1.6 cm. Cross-sections have been extracted from the HMLS and TLS point clouds and after comparing the sections, 80% of the sigma values are less or equal to 1 cm. The results show high potential of using HMLS and also a long-range laser scanner for 3D modelling of complex scenes, the occlusion effect in the case of TLS being only 5% of the scanned area.

scholarly journals TOWARDS THE AUTOMATIC 3D PARAMETRIZATION OF NON-PLANAR SURFACES FROM POINT CLOUDS IN HBIM APPLICATIONS

2019 ◽  
Vol XLII-2/W15 ◽  
pp. 1023-1030
Author(s):  
J. Román ◽  
P. M. Lerones ◽  
J. Llamas ◽  
E. Zalama ◽  
J. Gómez-García-Bermejo
Keyword(s):  
Point Cloud ◽  
Input Data ◽  
Laser Scanning ◽  
Middle Age ◽  
Point Clouds ◽  
3D Laser Scanning ◽  
Architectural Elements ◽  
Planar Surfaces ◽  
Architectural Features ◽  
Renaissance Period

<p><strong>Abstract.</strong> 3D laser scanning and photogrammetric 3D reconstruction generate point clouds from which the geometry of BIM models can be created. However, a few methods do this automatically for concrete architectural elements, but in no case for the entirety of heritage assets. A novel procedure for the automatic recognition and parametrization of non-planar surfaces of heritage immovable assets is presented using point clouds as raw input data. The methodology is able to detect the most relevant architectural features in a point cloud and their interdependences through the analysis of the intersections of related elements. The non-planar surfaces detected, mainly cylinders, are studied in relation to the neighbouring planar surfaces present in the cloud so that the boundaries of both the planar and the non-planar surfaces are accurately defined. The procedure is applied to the emblematic Castle of Torrelobatón, located in Valladolid (Spain) to allow the cataloguing of required elements, as illustrative example of the European defensive architecture from the Middle age to the Renaissance period. Results and conclusions are reported to evaluate the performance of this approach.</p>

scholarly journals INTERACTIVE CLASSIFICATION OF CONSTRUCTION MATERIALS: FEEDBACK DRIVEN FRAMEWORK FOR ANNOTATION AND ANALYSIS OF 3D POINT CLOUDS

2017 ◽  
Vol XLII-2/W5 ◽  
pp. 343-347
Author(s):  
M. R. Hess ◽  
V. Petrovic ◽  
F. Kuester
Keyword(s):  
Cultural Heritage ◽  
Point Cloud ◽  
Laser Scanning ◽  
Building Materials ◽  
Point Clouds ◽  
Normal Vector ◽  
Surface Geometry ◽  
Historical Structures ◽  
3D Point Clouds

Digital documentation of cultural heritage structures is increasingly more common through the application of different imaging techniques. Many works have focused on the application of laser scanning and photogrammetry techniques for the acquisition of threedimensional (3D) geometry detailing cultural heritage sites and structures. With an abundance of these 3D data assets, there must be a digital environment where these data can be visualized and analyzed. Presented here is a feedback driven visualization framework that seamlessly enables interactive exploration and manipulation of massive point cloud data. The focus of this work is on the classification of different building materials with the goal of building more accurate as-built information models of historical structures. User defined functions have been tested within the interactive point cloud visualization framework to evaluate automated and semi-automated classification of 3D point data. These functions include decisions based on observed color, laser intensity, normal vector or local surface geometry. Multiple case studies are presented here to demonstrate the flexibility and utility of the presented point cloud visualization framework to achieve classification objectives.

scholarly journals Fused Transparent Visualization of Point Cloud Data and Background Photographic Image for Tangible Cultural Heritage Assets

2019 ◽  
Vol 8 (8) ◽  
pp. 343 ◽  
Author(s):  
Li ◽  
Hasegawa ◽  
Nii ◽  
Tanaka
Keyword(s):  
Cultural Heritage ◽  
Point Cloud ◽  
Laser Scanning ◽  
Large Scale ◽  
Three Dimensional ◽  
Point Clouds ◽  
Point Cloud Data ◽  
Cloud Data ◽  
Photographic Image ◽  
Scale Point

Digital archiving of three-dimensional cultural heritage assets has increased the demand for visualization of large-scale point clouds of cultural heritage assets acquired by laser scanning. We proposed a fused transparent visualization method that visualizes a point cloud of a cultural heritage asset in an environment using a photographic image as the background. We also proposed lightness adjustment and color enhancement methods to deal with the reduced visibility caused by the fused visualization. We applied the proposed method to a laser-scanned point cloud of a high-valued cultural festival float with complex inner and outer structures. Experimental results demonstrate that the proposed method enables high-quality transparent visualization of the cultural asset in its surrounding environment.

scholarly journals Accuracy assessment of modeling architectural structures and details using terrestrial laser scanning

2015 ◽  
Vol XL-5/W7 ◽  
pp. 241-243 ◽  
Author(s):  
M. Kedzierski ◽  
P. Walczykowski ◽  
A. Orych ◽  
P. Czarnecka
Keyword(s):  
Cultural Heritage ◽  
Point Cloud ◽  
Laser Scanning ◽  
Incidence Angle ◽  
Accuracy Assessment ◽  
Construction Materials ◽  
Point Clouds ◽  
Test Field ◽  
Different Types ◽  
The Impact

One of the most important aspects when performing architectural documentation of cultural heritage structures is the accuracy of both the data and the products which are generated from these data: documentation in the form of 3D models or vector drawings. The paper describes an assessment of the accuracy of modelling data acquired using a terrestrial phase scanner in relation to the density of a point cloud representing the surface of different types of construction materials typical for cultural heritage structures. This analysis includes the impact of the scanning geometry: the incidence angle of the laser beam and the scanning distance. For the purposes of this research, a test field consisting of samples of different types of construction materials (brick, wood, plastic, plaster, a ceramic tile, sheet metal) was built. The study involved conducting measurements at different angles and from a range of distances for chosen scanning densities. Data, acquired in the form of point clouds, were then filtered and modelled. An accuracy assessment of the 3D model was conducted by fitting it with the point cloud. The reflection intensity of each type of material was also analyzed, trying to determine which construction materials have the highest reflectance coefficients, and which have the lowest reflection coefficients, and in turn how this variable changes for different scanning parameters. Additionally measurements were taken of a fragment of a building in order to compare the results obtained in laboratory conditions, with those taken in field conditions.

scholarly journals Linear-Based Incremental Co-Registration of MLS and Photogrammetric Point Clouds

2021 ◽  
Vol 13 (11) ◽  
pp. 2195
Author(s):  
Shiming Li ◽  
Xuming Ge ◽  
Shengfu Li ◽  
Bo Xu ◽  
Zhendong Wang
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Point Clouds ◽  
Registration Method ◽  
Cloud Data ◽  
Linear Feature ◽  
Data Registration ◽  
Source Point ◽  
Urban Remote Sensing ◽  
Single Data

Today, mobile laser scanning and oblique photogrammetry are two standard urban remote sensing acquisition methods, and the cross-source point-cloud data obtained using these methods have significant differences and complementarity. Accurate co-registration can make up for the limitations of a single data source, but many existing registration methods face critical challenges. Therefore, in this paper, we propose a systematic incremental registration method that can successfully register MLS and photogrammetric point clouds in the presence of a large number of missing data, large variations in point density, and scale differences. The robustness of this method is due to its elimination of noise in the extracted linear features and its 2D incremental registration strategy. There are three main contributions of our work: (1) the development of an end-to-end automatic cross-source point-cloud registration method; (2) a way to effectively extract the linear feature and restore the scale; and (3) an incremental registration strategy that simplifies the complex registration process. The experimental results show that this method can successfully achieve cross-source data registration, while other methods have difficulty obtaining satisfactory registration results efficiently. Moreover, this method can be extended to more point-cloud sources.

scholarly journals Symmetry Analysis of Oriental Polygonal Pagodas Using 3D Point Clouds for Cultural Heritage

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1228
Author(s):  
Ting On Chan ◽  
Linyuan Xia ◽  
Yimin Chen ◽  
Wei Lang ◽  
Tingting Chen ◽  
...  
Keyword(s):  
Cultural Heritage ◽  
Unmanned Aerial Vehicle ◽  
Point Cloud ◽  
Geometric Model ◽  
Digital Camera ◽  
Point Clouds ◽  
Symmetry Analysis ◽  
3D Point Clouds ◽  
Transmission Towers ◽  
Aerial Vehicle

Ancient pagodas are usually parts of hot tourist spots in many oriental countries due to their unique historical backgrounds. They are usually polygonal structures comprised by multiple floors, which are separated by eaves. In this paper, we propose a new method to investigate both the rotational and reflectional symmetry of such polygonal pagodas through developing novel geometric models to fit to the 3D point clouds obtained from photogrammetric reconstruction. The geometric model consists of multiple polygonal pyramid/prism models but has a common central axis. The method was verified by four datasets collected by an unmanned aerial vehicle (UAV) and a hand-held digital camera. The results indicate that the models fit accurately to the pagodas’ point clouds. The symmetry was realized by rotating and reflecting the pagodas’ point clouds after a complete leveling of the point cloud was achieved using the estimated central axes. The results show that there are RMSEs of 5.04 cm and 5.20 cm deviated from the perfect (theoretical) rotational and reflectional symmetries, respectively. This concludes that the examined pagodas are highly symmetric, both rotationally and reflectionally. The concept presented in the paper not only work for polygonal pagodas, but it can also be readily transformed and implemented for other applications for other pagoda-like objects such as transmission towers.

scholarly journals Revealing Changes in the Stem Form and Volume Allocation in Diverse Boreal Forests Using Two-Date Terrestrial Laser Scanning

Forests ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 835
Author(s):  
Ville Luoma ◽  
Tuomas Yrttimaa ◽  
Ville Kankare ◽  
Ninni Saarinen ◽  
Jiri Pyörälä ◽  
...  
Keyword(s):  
Tree Growth ◽  
Point Cloud ◽  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Stem Volume ◽  
Accurate Information ◽  
Stem Form ◽  
Monitoring Period ◽  
Significant Difference

Tree growth is a multidimensional process that is affected by several factors. There is a continuous demand for improved information on tree growth and the ecological traits controlling it. This study aims at providing new approaches to improve ecological understanding of tree growth by the means of terrestrial laser scanning (TLS). Changes in tree stem form and stem volume allocation were investigated during a five-year monitoring period. In total, a selection of attributes from 736 trees from 37 sample plots representing different forest structures were extracted from taper curves derived from two-date TLS point clouds. The results of this study showed the capability of point cloud-based methods in detecting changes in the stem form and volume allocation. In addition, the results showed a significant difference between different forest structures in how relative stem volume and logwood volume increased during the monitoring period. Along with contributing to providing more accurate information for monitoring purposes in general, the findings of this study showed the ability and many possibilities of point cloud-based method to characterize changes in living organisms in particular, which further promote the feasibility of using point clouds as an observation method also in ecological studies.

Sign in / Sign up

Export Citation Format

Share Document