scholarly journals Robust Silica-Bacterial Cellulose Composite Aerogel Fibers for Thermal Insulation Textile

Gels ◽  
2021 ◽  
Vol 7 (3) ◽  
pp. 145
Author(s):  
Huazheng Sai ◽  
Meijuan Wang ◽  
Changqing Miao ◽  
Qiqi Song ◽  
Yutong Wang ◽  
...  
Keyword(s):  
Bacterial Cellulose ◽  
Thermal Insulation ◽  
High Performance ◽  
Specific Area ◽  
Decomposition Temperature ◽  
Composite Aerogel ◽  
Shaping Process ◽  
The Matrix ◽  
Composite Aerogels ◽  
Novel Method

Aerogels are nanoporous materials with excellent properties, especially super thermal insulation. However, owing to their serious high brittleness, the macroscopic forms of aerogels are not sufficiently rich for the application in some fields, such as thermal insulation clothing fabric. Recently, freeze spinning and wet spinning have been attempted for the synthesis of aerogel fibers. In this study, robust fibrous silica-bacterial cellulose (BC) composite aerogels with high performance were synthesized in a novel way. Silica sol was diffused into a fiber-like matrix, which was obtained by cutting the BC hydrogel and followed by secondary shaping to form a composite wet gel fiber with a nanoscale interpenetrating network structure. The tensile strength of the resulting aerogel fibers reached up to 5.4 MPa because the quantity of BC nanofibers in the unit volume of the matrix was improved significantly by the secondary shaping process. In addition, the composite aerogel fibers had a high specific area (up to 606.9 m2/g), low density (less than 0.164 g/cm3), and outstanding hydrophobicity. Most notably, they exhibited excellent thermal insulation performance in high-temperature (210 °C) or low-temperature (−72 °C) environments. Moreover, the thermal stability of CAFs (decomposition temperature was about 330 °C) was higher than that of natural polymer fiber. A novel method was proposed herein to prepare aerogel fibers with excellent performance to meet the requirements of wearable applications.

Silica-Bacterial Cellulose Composite Aerogel Fibers with Excellent Mechanical Properties from Sodium Silicate Precursor

Gels ◽  
2021 ◽  
Vol 8 (1) ◽  
pp. 17
Author(s):  
Qiqi Song ◽  
Changqing Miao ◽  
Huazheng Sai ◽  
Jie Gu ◽  
Meijuan Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Bacterial Cellulose ◽  
Thermal Insulation ◽  
Sol Gel ◽  
Silicate Solution ◽  
High Specific Surface Area ◽  
Composite Aerogel ◽  
Composite Gel ◽  
Novel Method ◽  
Insulation Performance

Forming fibers for fabric insulation is difficult using aerogels, which have excellent thermal insulation performance but poor mechanical properties. A previous study proposed a novel method that could effectively improve the mechanical properties of aerogels and make them into fibers for use in fabric insulation. In this study, composite aerogel fibers (CAFs) with excellent mechanical properties and thermal insulation performance were prepared using a streamlined method. The wet bacterial cellulose (BC) matrix without freeze-drying directly was immersed in an inorganic precursor (silicate) solution, followed by initiating in situ sol-gel reaction under the action of acidic catalyst after secondary shaping. Finally, after surface modification and ambient drying of the wet composite gel, CAFs were obtained. The CAFs prepared by the simplified method still had favorable mechanical properties (tensile strength of 4.5 MPa) and excellent thermal insulation properties under extreme conditions (220 °C and −60 °C). In particular, compared with previous work, the presented CAFs preparation process is simpler and more environmentally friendly. In addition, the experimental costs were reduced. Furthermore, the obtained CAFs had high specific surface area (671.3 m²/g), excellent hydrophobicity, and low density (≤0.154 g/cm3). This streamlined method was proposed to prepare aerogel fibers with excellent performance to meet the requirements of wearable applications.

scholarly journals Enhanced Thermal Insulation and Flame-Retardant Properties of Polyvinyl Alcohol-Based Aerogels Composited with Ammonium Polyphosphate and Chitosan

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
MinYi Luo ◽  
Jiayou Xu ◽  
Shu Lv ◽  
XueFeng Yuan ◽  
Xiaolan Liang
Keyword(s):  
Polyvinyl Alcohol ◽  
Heat Release ◽  
Flame Retardant ◽  
Thermal Insulation ◽  
Heat Release Rate ◽  
Flame Retardancy ◽  
Release Rate ◽  
Ammonium Polyphosphate ◽  
Composite Aerogel ◽  
Composite Aerogels

Polyvinyl alcohol- (PVA-) based aerogels have attracted widespread attention owing to their low cost, eco-friendliness, and low density. However, the applications of PVA-based aerogels are limited by their flammability. In this study, a flame retardant, ammonium polyphosphate (APP), and a biopolymer, chitosan (CS), were added to polyvinyl alcohol (PVA), and the polymer was further crosslinked using boric acid (H3BO3). In the PVA aerogels, the negatively charged APP and positively charged CS formed a polyelectrolyte complex (PEC) through ionic interaction. Cone calorimetry and vertical burning tests (UL-94) indicated that the PVA composite aerogels have excellent flame retardancy; they could decrease the heat release rate, total heat release rate, and carbon dioxide (CO2) generation. Both PVA/H3BO3 and APP-CS in the composite aerogel could be burned to carbon, and the foamed char layer could act together to impart the PVA composite aerogels with good flame retardancy. Further, the decrease in the temperature at the backside of the aerogels with increasing APP-CS content, as determined by the flame-spraying experiment, indicated that the PVA-based aerogels with APP-CS can also serve as thermal insulation materials. This work provides an effective and promising method for the preparation of PVA-based aerogels with good flame retardancy and thermal insulation property for construction materials.

scholarly journals A Novel Branched Al2O3/Silicon Rubber Composite with Improved Thermal Conductivity and Excellent Electrical Insulation Performance

Nanomaterials ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 2654
Author(s):  
Yuge Ouyang ◽  
Xiaofei Li ◽  
Huafeng Tian ◽  
Liuyang Bai ◽  
Fangli Yuan
Keyword(s):  
Thermal Conductivity ◽  
Polymer Composite ◽  
High Performance ◽  
Conductive Polymer ◽  
Three Dimensional ◽  
Volume Resistivity ◽  
High Volume ◽  
Decomposition Temperature ◽  
Electrical Insulation ◽  
The Matrix

In this paper, we report a thermal conductive polymer composite that consists of silicone rubber (SR) and branched Al2O3 (B-Al2O3). Owing to the unique two-dimensional branched structure, B-Al2O3 particles form a continuous three-dimensional network structure by overlapping each other in the matrix, serving as a continuous heat conductive pathway. As a result, the polymer composite with a 70 wt% filler achieves a maximum thermal conductivity of 1.242 Wm−1 K−1, which is equivalent to a significant enhancement of 521% compared to that of a pure matrix. In addition, the composite maintains a high volume resistivity of 7.94 × 1014 Ω·cm with the loading of 70 wt%, indicating that it meets the requirements in the field of electrical insulation. Moreover, B-Al2O3 fillers are well dispersed (no large agglomerates) and form a strong interfacial adhesion with the matrix. Therefore, the thermal decomposition temperature, residual mass, tensile strength, modulus and modulus of toughness of composites are significantly improved simultaneously. This strategy provides new insights for the design of high-performance polymer composites with potential application in advanced thermal management in modern electronics.

scholarly journals Metal Coordination Bonds Crosslinked Polydopamine/Cellulose Nanofibril Composite Aerogels with Significantly Improved Thermal Stability, Flame Resistance, and Thermal Insulation Properties

2021 ◽  
Author(s):  
Fuyi Han ◽  
Hong Huang ◽  
Yan Wang ◽  
Lifang Liu
Keyword(s):  
Thermal Stability ◽  
Thermal Insulation ◽  
High Performance ◽  
Low Cost ◽  
Metal Coordination ◽  
Cellulose Nanofibril ◽  
Flame Resistance ◽  
Comprehensive Properties ◽  
Composite Aerogels ◽  
Coordination Bonds

Abstract Cellulose nanofibril (CNF) aerogels have attracted great interests in recent years due to the low cost, sustainability and biocompatibility of raw CNFs. However, the poor thermal stability and flammable feature of CNF aerogels have limited their wider applications. In this paper, polydopamine/CNF composite aerogels with good comprehensive properties are fabricated by modification of CNF with polydopamine and metal coordination bonds crosslinking. The microstructure and properties of composite aerogels are thoroughly characterized by a variety of tests. It is found that the microstructure of aerogels are more regular and the compressive strength of aerogels are enhanced by the incorporation of polydopamine and Fe3+ crosslinking. Importantly, the thermal stability and flame resistance of aerogels are significantly improved, which permit the application of composite aerogels in high-temperature thermal insulation. In addition, the reversible characteristic of metal coordination bonds allows the water induced healing of fractured composite aerogels. This study is expected to provide information for future development of green and high-performance aerogels.

Morphology of High-Performance Rigid-Rod Polymer Fibers and Molecular Composites

1989 ◽  
Vol 47 ◽  
pp. 338-339
Author(s):  
W.W. Adams ◽  
S. J. Krause
Keyword(s):  
Tensile Strength ◽  
High Performance ◽  
Liquid Crystalline ◽  
Molecular Level ◽  
Synergistic Effects ◽  
Tensile Modulus ◽  
Commercial Development ◽  
The Matrix ◽  
Molecular Composites ◽  
Rigid Rod

Rigid-rod polymers such as PBO, poly(paraphenylene benzobisoxazole), Figure 1a, are now in commercial development for use as high-performance fibers and for reinforcement at the molecular level in molecular composites. Spinning of liquid crystalline polyphosphoric acid solutions of PBO, followed by washing, drying, and tension heat treatment produces fibers which have the following properties: density of 1.59 g/cm3; tensile strength of 820 kpsi; tensile modulus of 52 Mpsi; compressive strength of 50 kpsi; they are electrically insulating; they do not absorb moisture; and they are insensitive to radiation, including ultraviolet. Since the chain modulus of PBO is estimated to be 730 GPa, the high stiffness also affords the opportunity to reinforce a flexible coil polymer at the molecular level, in analogy to a chopped fiber reinforced composite. The objectives of the molecular composite concept are to eliminate the thermal expansion coefficient mismatch between the fiber and the matrix, as occurs in conventional composites, to eliminate the interface between the fiber and the matrix, and, hopefully, to obtain synergistic effects from the exceptional stiffness of the rigid-rod molecule. These expectations have been confirmed in the case of blending rigid-rod PBZT, poly(paraphenylene benzobisthiazole), Figure 1b, with stiff-chain ABPBI, poly 2,5(6) benzimidazole, Fig. 1c A film with 30% PBZT/70% ABPBI had tensile strength 190 kpsi and tensile modulus of 13 Mpsi when solution spun from a 3% methane sulfonic acid solution into a film. The modulus, as predicted by rule of mixtures, for a film with this composition and with planar isotropic orientation, should be 16 Mpsi. The experimental value is 80% of the theoretical value indicating that the concept of a molecular composite is valid.

scholarly journals Aerogel Based High Performance Thermal Insulation Materials

2019 ◽  
Vol 553 ◽  
pp. 012043
Author(s):  
Mohanapriya Venkataraman ◽  
Rajesh Mishra ◽  
Jiri Militky ◽  
Dana Kremenakova ◽  
Petru Michal
Keyword(s):  
Thermal Insulation ◽  
High Performance ◽  
Insulation Materials

scholarly journals Effect of Nanofiller Content on Dynamic Mechanical and Thermal Properties of Multi-Walled Carbon Nanotube and Montmorillonite Nanoclay Filler Hybrid Shape Memory Epoxy Composites

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 700
Author(s):  
Muhamad Hasfanizam Mat Yazik ◽  
Mohamed Thariq Hameed Sultan ◽  
Mohammad Jawaid ◽  
Abd Rahim Abu Talib ◽  
Norkhairunnisa Mazlan ◽  
...  
Keyword(s):  
Shape Memory ◽  
High Performance ◽  
Loss Modulus ◽  
Decomposition Temperature ◽  
Hybrid Nanocomposites ◽  
Mechanical And Thermal Properties ◽  
Scanning Calorimetry ◽  
Hybrid Filler ◽  
Dynamic Mechanical ◽  
Tan Δ

The aim of the present study has been to evaluate the effect of hybridization of montmorillonite (MMT) and multi-walled carbon nanotubes (MWCNT) on the thermal and viscoelastic properties of shape memory epoxy polymer (SMEP) nanocomposites. In this study, ultra-sonication was utilized to disperse 1%, 3%, and 5% MMT in combination with 0.5%, 1%, and 1.5% MWCNT into the epoxy system. The fabricated SMEP hybrid nanocomposites were characterized via differential scanning calorimetry, dynamic mechanical analysis, and thermogravimetric analysis. The storage modulus (E’), loss modulus (E”), tan δ, decomposition temperature, and decomposition rate, varied upon the addition of the fillers. Tan δ indicated a reduction of glass transition temperature (Tg) for all the hybrid SMEP nanocomposites. 3% MMT/1% MWCNT displayed best overall performance compared to other hybrid filler concentrations and indicated a better mechanical property compared to neat SMEP. These findings open a way to develop novel high-performance composites for various potential applications, such as morphing structures and actuators, as well as biomedical devices.

scholarly journals Simplified and Rapid Determination of Primaquine and 5,6-Orthoquinone Primaquine by UHPLC-MS/MS: Its Application to a Pharmacokinetic Study

Molecules ◽  
2021 ◽  
Vol 26 (14) ◽  
pp. 4357
Author(s):  
Waritda Pookmanee ◽  
Siriwan Thongthip ◽  
Jeeranut Tankanitlert ◽  
Mathirut Mungthin ◽  
Chonlaphat Sukasem ◽  
...  
Keyword(s):  
Pharmacokinetic Study ◽  
High Performance ◽  
Rapid Determination ◽  
Active Metabolites ◽  
Chromatography Tandem Mass Spectrometry ◽  
Accuracy And Precision ◽  
The Matrix ◽  
Liquid Chromatography Tandem Mass ◽  
Isocratic Mode

The method for the determination of primaquine (PQ) and 5,6-orthoquinone primaquine (5,6-PQ), the representative marker for PQ active metabolites, via CYP2D6 in human plasma and urine has been validated. All samples were extracted using acetonitrile for protein precipitation and analyzed using the ultra-high-performance liquid chromatography–tandem mass spectrometry (UHPLC-MS/MS) system. Chromatography separation was carried out using a Hypersil GOLDTM aQ C18 column (100 × 2.1 mm, particle size 1.9 μm) with a C18 guard column (4 × 3 mm) flowed with an isocratic mode of methanol, water, and acetonitrile in an optimal ratio at 0.4 mL/min. The retention times of 5,6-PQ and PQ in plasma and urine were 0.8 and 1.6 min, respectively. The method was validated according to the guideline. The linearity of the analytes was in the range of 25–1500 ng/mL. The matrix effect of PQ and 5,6-PQ ranged from 100% to 116% and from 87% to 104% for plasma, and from 87% to 89% and from 86% to 87% for urine, respectively. The recovery of PQ and 5,6-PQ ranged from 78% to 95% and form 80% to 98% for plasma, and from 102% to from 112% to 97% to 109% for urine, respectively. The accuracy and precision of PQ and 5,6-PQ in plasma and urine were within the acceptance criteria. The samples should be kept in the freezer (−80 °C) and analyzed within 7 days due to the metabolite stability. This validated UHPLC-MS/MS method was beneficial for a pharmacokinetic study in subjects receiving PQ.

Electrically conductive biocompatible composite aerogel based on nanofibrillated template of bacterial cellulose/polyaniline/nano-clay

2021 ◽  
Vol 173 ◽  
pp. 467-480
Author(s):  
Mohammad Hadi Salehi ◽  
Hooman Golbaten-Mofrad ◽  
Seyed Hassan Jafari ◽  
Vahabodin Goodarzi ◽  
Maliheh Entezari ◽  
...  
Keyword(s):  
Bacterial Cellulose ◽  
Electrically Conductive ◽  
Composite Aerogel ◽  
Nano Clay
Sign in / Sign up

Export Citation Format

Share Document