scholarly journals Shale Poroelastic Effects on Well Performance Analysis of Shale Gas Reservoirs

Fuels ◽  
2021 ◽  
Vol 2 (2) ◽  
pp. 130-143
Author(s):  
Ebrahim Fathi ◽  
Fatemeh Belyadi ◽  
Bahiya Jabbar
Keyword(s):  
History Matching ◽  
Gas Transport ◽  
Gas Production ◽  
Unconventional Reservoirs ◽  
Sorption Behavior ◽  
Governing Equations ◽  
Hydrocarbon Production ◽  
Multi Scale ◽  
Pore Compressibility ◽  
And Storage

The effect of poroelastic properties of the shale matrix on gas storage and transport mechanisms has gained significant attention, especially during history-matching and hydrocarbon production forecasting in unconventional reservoirs. The common oil and gas industry practice in unconventional reservoir simulation is the extension of conventional reservoir simulation that ignores the dynamic behavior of matrix porosity and permeability as a function of reservoir effective net stress. This approach ignores the significant impact of the poroelastic characteristics of the shale matrix on hydrocarbon production. The poroelastic characteristics of the shale matrix highly relate to the shale matrix geomechanical properties, such as the Young’s Modulus, Poisson’s ratio, bulk modulus, sorption behavior, total organic content (TOC), mineralogy and presence of natural fractures in the multi-scale shale structure. In this study, in order to quantify the effect of the poroelasticity of the shale matrix on gas production, a multi-continuum approach was employed in which the shale matrix was divided into organic materials, inorganic materials and natural fractures. The governing equations for gas transport and storage in shale were developed from the basic fundamentals of mass and momentum conservation equations. In this case, gas transport in organics was assumed to be diffusive, while gas transport in inorganics was governed by convection. Finally, a fracture system was added to the multi-scale shale gas matrix, and the poroelastic effect of the shale matrix on transport and storage was investigated. A modified Palmer and Mansoori model (1998) was used to include the pore compression, matrix swelling/shrinkage and desorption-induced deformation of shale organic matter on the overall pore compressibility of the shale matrix. For the inorganic part of the matrix, relations between rock mechanical properties and the pore compressibility were obtained. A dual Langmuir–Henry isotherm was also used to describe the sorption behavior of shale organic materials. The coupled governing equations of gas storage and transport in the shale matrix were then solved using the implicit finite difference approach using MATLAB. For this purpose, rock and fluid properties were obtained using actual well logging and core analysis of the Marcellus gas well. The results showed the importance of the poroelastic effect on the pressure response and rate of gas recovery from the shale matrix. The effect was found to be mainly due to desorption-induced matrix deformation at an early stage. Coupling the shale matrix gas production including the poroelastic effect in history-matching the gas production from unconventional reservoirs will significantly improve engineering completion design optimization of the unconventional reservoirs by providing more accurate and robust production forecasts for each hydraulic fracture stage.

Diffusion-Based Modeling of Gas Transport in Organic-Rich Ultratight Reservoirs

SPE Journal ◽  
2021 ◽  
pp. 1-26
Author(s):  
Zizhong Liu ◽  
Hamid Emami-Meybodi
Keyword(s):  
Diffusion Coefficient ◽  
Adsorption Capacity ◽  
Surface Diffusion ◽  
Diffusion Coefficients ◽  
Gas Transport ◽  
Knudsen Diffusion ◽  
Gas Production ◽  
Hydrocarbon Transport ◽  
The Impact ◽  
And Storage

Summary The complex pore structure and storage mechanism of organic-rich ultratight reservoirs make the hydrocarbon transport within these reservoirs complicated and significantly different from conventional oil and gas reservoirs. A substantial fraction of pore volume in the ultratight matrix consists of nanopores in which the notion of viscous flow may become irrelevant. Instead, multiple transport and storage mechanisms should be considered to model fluid transport within the shale matrix, including molecular diffusion, Knudsen diffusion, surface diffusion, and sorption. This paper presents a diffusion-based semianalytical model for a single-component gas transport within an infinite-actingorganic-rich ultratight matrix. The model treats free and sorbed gas as two phases coexisting in nanopores. The overall mass conservation equation for both phases is transformed into one governing equation solely on the basis of the concentration (density) of the free phase. As a result, the partial differential equation (PDE) governing the overall mass transport carries two newly defined nonlinear terms; namely, effective diffusion coefficient, De, and capacity factor, Φ. The De term accounts for the molecular, Knudsen, and surface diffusion coefficients, and the Φ term considers the mass exchange between free and sorbed phases under sorption equilibrium condition. Furthermore, the ratio of De/Φ is recognized as an apparent diffusion coefficient Da, which is a function of free phase concentration. The nonlinear PDE is solved by applying a piecewise-constant-coefficient technique that divides the domain under consideration into an arbitrary number of subdomains. Each subdomain is assigned with a constant Da. The diffusion-based model is validated against numerical simulation. The model is then used to investigate the impact of surface and Knudsen diffusion coefficients, porosity, and adsorption capacity on gas transport within the ultratight formation. Further, the model is used to study gas transport and production from the Barnett, Marcellus, and New Albany shales. The results show that surface diffusion significantly contributes to gas production in shales with large values of surface diffusion coefficient and adsorption capacity and small values of Knudsen diffusion coefficient and total porosity. Thus, neglecting surface diffusion in organic-rich shales may result in the underestimation of gas production.

scholarly journals Triple-Porosity Modelling for the Simulation of Multiscale Flow Mechanisms in Shale Reservoirs

Geofluids ◽  
2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Mingyao Wei ◽  
Jishan Liu ◽  
Derek Elsworth ◽  
Enyuan Wang
Keyword(s):  
Shale Gas ◽  
History Matching ◽  
Gas Transport ◽  
Gas Production ◽  
Natural Fracture ◽  
System Matrix ◽  
Fracture Permeability ◽  
Gas Reservoir ◽  
Apparent Permeability ◽  
Shale Reservoir

Shale gas reservoir is a typical type of unconventional gas reservoir, primarily because of the complex flow mechanism from nanoscale to macroscale. A triple-porosity model (M3 model) comprising kerogen system, matrix system, and natural fracture system was presented to describe the multispace scale, multitime scale, and multiphysics characteristic of gas flows in shale reservoir. Apparent permeability model for real gas transport in nanopores, which covers flow regime effect and geomechanical effect, was used to address multiscale flow in shale matrix. This paper aims at quantifying the shale gas in different scales and its sequence in the process of gas production. The model results used for history matching also showed consistency against gas production data from the Barnett Shale. It also revealed the multispace scale process of gas production from a single well, which is supplied by gas transport from natural fracture, matrix, and kerogen sequentially. Sensitivity analysis on the contributions of shale reservoir permeability in different scales gives some insight as to their importance. Simulated results showed that free gas in matrix contributes to the main source of gas production, while the performance of a gas shale well is strongly determined by the natural fracture permeability.

NANOSCALE PORE SIZE DISTRIBUTION EFFECTS ON GAS PRODUCTION FROM FRACTAL SHALE ROCKS

Fractals ◽  
2019 ◽  
Vol 27 (08) ◽  
pp. 1950142
Author(s):  
JINZE XU ◽  
KELIU WU ◽  
RAN LI ◽  
ZANDONG LI ◽  
JING LI ◽  
...  
Keyword(s):  
Fractal Dimension ◽  
Pore Size Distribution ◽  
Pore Size ◽  
Size Distribution ◽  
Gas Transport ◽  
Gas Production ◽  
Lower Sensitivity ◽  
Apparent Permeability ◽  
Transport Efficiency ◽  
Nanoscale Pore

Effect of nanoscale pore size distribution (PSD) on shale gas production is one of the challenges to be addressed by the industry. An improved approach to study multi-scale real gas transport in fractal shale rocks is proposed to bridge nanoscale PSD and gas filed production. This approach is well validated with field tests. Results indicate the gas production is underestimated without considering a nanoscale PSD. A PSD with a larger fractal dimension in pore size and variance yields a higher fraction of large pores; this leads to a better gas transport capacity; this is owing to a higher free gas transport ratio. A PSD with a smaller fractal dimension yields a lower cumulative gas production; this is because a smaller fractal dimension results in the reduction of gas transport efficiency. With an increase in the fractal dimension in pore size and variance, an apparent permeability-shifting effect is less obvious, and the sensitivity of this effect to a nanoscale PSD is also impaired. Higher fractal dimensions and variances result in higher cumulative gas production and a lower sensitivity of gas production to a nanoscale PSD, which is due to a better gas transport efficiency. The shale apparent permeability-shifting effect to nanoscale is more sensitive to a nanoscale PSD under a higher initial reservoir pressure, which makes gas production more sensitive to a nanoscale PSD. The findings of this study can help to better understand the influence of a nanoscale PSD on gas flow capacity and gas production.

scholarly journals Managing Uncertainty in Geological CO2 Storage Using Bayesian Evidential Learning

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1557
Author(s):  
Amine Tadjer ◽  
Reidar B. Bratvold
Keyword(s):  
Uncertainty Quantification ◽  
History Matching ◽  
Co2 Storage ◽  
Carbon Capture And Storage ◽  
Monitoring Program ◽  
Co2 Injection ◽  
Drinking Water Contamination ◽  
Model Inversion ◽  
Geological Co2 Storage ◽  
And Storage

Carbon capture and storage (CCS) has been increasingly looking like a promising strategy to reduce CO2 emissions and meet the Paris agreement’s climate target. To ensure that CCS is safe and successful, an efficient monitoring program that will prevent storage reservoir leakage and drinking water contamination in groundwater aquifers must be implemented. However, geologic CO2 sequestration (GCS) sites are not completely certain about the geological properties, which makes it difficult to predict the behavior of the injected gases, CO2 brine leakage rates through wellbores, and CO2 plume migration. Significant effort is required to observe how CO2 behaves in reservoirs. A key question is: Will the CO2 injection and storage behave as expected, and can we anticipate leakages? History matching of reservoir models can mitigate uncertainty towards a predictive strategy. It could prove challenging to develop a set of history matching models that preserve geological realism. A new Bayesian evidential learning (BEL) protocol for uncertainty quantification was released through literature, as an alternative to the model-space inversion in the history-matching approach. Consequently, an ensemble of previous geological models was developed using a prior distribution’s Monte Carlo simulation, followed by direct forecasting (DF) for joint uncertainty quantification. The goal of this work is to use prior models to identify a statistical relationship between data prediction, ensemble models, and data variables, without any explicit model inversion. The paper also introduces a new DF implementation using an ensemble smoother and shows that the new implementation can make the computation more robust than the standard method. The Utsira saline aquifer west of Norway is used to exemplify BEL’s ability to predict the CO2 mass and leakages and improve decision support regarding CO2 storage projects.

Integrated Production Model as a Tool for Optimization the Development Strategy of the Sakhalin Oil and Gas Condensate Field

2021 ◽  
Author(s):  
Oleksandr Doroshenko ◽  
Miljenko Cimic ◽  
Nicholas Singh ◽  
Yevhen Machuzhak
Keyword(s):  
History Matching ◽  
Effective Field ◽  
Production Optimization ◽  
Production Model ◽  
Production Forecast ◽  
Hydrocarbon Production ◽  
Integrated Production ◽  
Wellhead Pressure ◽  
Field Development ◽  
The Impact

Abstract A fully integrated production model (IPM) has been implemented in the Sakhalin field to optimize hydrocarbons production and carried out effective field development. To achieve our goal in optimizing production, a strategy has been accurately executed to align the surface facilities upgrade with the production forecast. The main challenges to achieving the goal, that we have faced were:All facilities were designed for early production stage in late 1980's, and as the asset outdated the pipeline sizes, routing and compression strategies needs review.Detecting, predicting and reducing liquid loading is required so that the operator can proactively control the hydrocarbon production process.No integrated asset model exists to date. The most significant engineering tasks were solved by creating models of reservoirs, wells and surface network facility, and after history matching and connecting all the elements of the model into a single environment, it has been used for the different production forecast scenarios, taking into account the impact of infrastructure bottlenecks on production of each well. This paper describes in detail methodology applied to calculate optimal well control, wellhead pressure, pressure at the inlet of the booster compressor, as well as for improving surface flowlines capacity. Using the model, we determined the compressor capacity required for the next more than ten years and assessed the impact of pipeline upgrades on oil gas and condensate production. Using optimization algorithms, a realistic scenario was set and used as a basis for maximizing hydrocarbon production. Integrated production model (IPM) and production optimization provided to us several development scenarios to achieve target production at the lowest cost by eliminating infrastructure constraints.

scholarly journals Numerical Modeling of Water and Gas Transport in Compacted GMZ Bentonite under Constant Volume Condition

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
Jiang-Feng Liu ◽  
Xu-Lou Cao ◽  
Hong-Yang Ni ◽  
Kai Zhang ◽  
Zhi-Xiao Ma ◽  
...  
Keyword(s):  
Gas Transport ◽  
Water Saturation ◽  
Underground Water ◽  
Gas Production ◽  
Gas Pressure ◽  
Constant Volume ◽  
Gmz Bentonite ◽  
Gas Migration ◽  
Sealing Ability ◽  
High Level

During deep geological disposal of high-level and long-lived radioactive waste, underground water erosion into buffer materials, such as bentonite, and gas production around the canister are unavoidable. Therefore, understanding water and gas migration into buffer materials is important when it comes to determining the sealing ability of engineered barriers in deep geological repositories. The main aim of our study is to provide insights into the water/gas transport in a compacted bentonite sample under constant volume conditions. The results of our study indicate that water saturation is obtained after 450 hours, which is similar to experimental results. Gas migration testing shows that the degree of water saturation in the samples is very sensitive to the gas pressure. As soon as 2 MPa or higher gas pressure was applied, the water saturation degree decreased quickly. Laboratory experiments indicate that gas breakthrough occurs at 4 MPa, with water being expelled from the downstream side. This indicates that gas pressure has a significant effect on the sealing ability of Gaomizozi (GMZ) bentonite.

scholarly journals Gas transport at dense phase conditions for the development of deepwater fields in the Colombian Caribbean sea

2020 ◽  
Vol 10 (1) ◽  
pp. 17-32
Author(s):  
Manuel Cabarcas Simancas ◽  
Angélica María Rada Santiago ◽  
Brandon Humberto Vargas Vera
Keyword(s):  
High Pressures ◽  
Gas Transport ◽  
Cost Savings ◽  
Caribbean Sea ◽  
Gas Production ◽  
Dense Phase ◽  
Reservoir Properties ◽  
Hydraulic Simulation ◽  
Target Field ◽  
Gas Fields

The purpose of this article is to set out the benefits of using the dense phase gas transport in future projects in the Caribbean Sea and to verify that when operating pipelines at high pressures, more mass per unit of volume is transported, and liquid formation risks are mitigated in hostile environments and low temperatures.This study contains key data about gas production fields in deep and ultra-deep waters around the world, which serve as a basis for research and provide characteristics for each development to be contrasted with the subsea architecture proposed in this paper. Additionally, analogies are established between the target field (Gorgón-1, Kronos-1 and Purple Angel-1) and other offshore gas fields that have similar reservoir properties. Using geographic information systems, the layout of a gas pipeline and a subsea field architecture that starts in the new gas province is proposed.Finally, using a hydraulic simulation tool, the gas transport performance in dense phase is analyzed and compared with the conventional way of transporting gas by underwater pipelines, achieving up to 20 % in cost savings when dense phase is applied.

Sign in / Sign up

Export Citation Format

Share Document