scholarly journals Static Pressure Distribution on Long Cylinders as a Function of the Yaw Angle and Reynolds Number

Fluids ◽  
2021 ◽  
Vol 6 (5) ◽  
pp. 169
Author(s):  
William W. Willmarth ◽  
Timothy Wei
Keyword(s):  
Reynolds Number ◽  
Large Scale ◽  
Pressure Coefficient ◽  
Circular Cylinders ◽  
Mean Flow ◽  
Freestream Velocity ◽  
Static Pressure Distribution ◽  
Aspect Ratios ◽  
Mean Pressure ◽  
Yaw Angle

This paper addresses the challenges of pressure-based sensing using axisymmetric probes whose axes are at small angles to the mean flow. Mean pressure measurements around three yawed circular cylinders with aspect ratios of 28, 64, and 100 were made to determine the effect of changes in the yaw angle, γ, and freestream velocity on the average pressure coefficient, C¯pN, and drag coefficient, CDN. The existence of four distinct types of circumferential pressure distributions—subcritical, transitional, supercritical, and asymmetric—were confirmed, along with the appropriateness of scaling C¯pN and CDN on a streamwise Reynolds number, Resw, based on the freestream velocity and the fluid path length along the cylinder in the streamwise direction. It was found that there was a distinct difference in the values of CDN and C¯pN at identical Resw values for cylinders yawed between 5° and 30°, and for cylinders at greater than a 30° yaw. For γ < 5°, there did not appear to be any large-scale vortices in the near wake, and CDN and C¯pN appeared to become independent of Resw. Over the range of 5° ≤ γ ≤ 30°, there was a complex interplay of freestream speed, yaw angle, and aspect ratio that affected the formation and shedding of Kármán-like vortices.

Unravelling the large-scale circulation modes in turbulent Rayleigh–Bénard convection

2021 ◽  
Author(s):  
Susanne Horn ◽  
Peter J. Schmid ◽  
Jonathan M. Aurnou
Keyword(s):  
Large Scale ◽  
Three Dimensional ◽  
Dynamic Mode Decomposition ◽  
Dynamic Mode ◽  
Mean Flow ◽  
Large Scale Circulation ◽  
Convective Systems ◽  
Aspect Ratios ◽  
Mode Decomposition ◽  
Coherent Flow Structure

Abstract The large-scale circulation (LSC) is the most fundamental turbulent coherent flow structure in Rayleigh-B\'enard convection. Further, LSCs provide the foundation upon which superstructures, the largest observable features in convective systems, are formed. In confined cylindrical geometries with diameter-to-height aspect ratios of Γ ≅ 1, LSC dynamics are known to be governed by a quasi-two-dimensional, coupled horizontal sloshing and torsional (ST) oscillatory mode. In contrast, in Γ ≥ √2 cylinders, a three-dimensional jump rope vortex (JRV) motion dominates the LSC dynamics. Here, we use dynamic mode decomposition (DMD) on direct numerical simulation data of liquid metal to show that both types of modes co-exist in Γ = 1 and Γ = 2 cylinders but with opposite dynamical importance. Furthermore, with this analysis, we demonstrate that ST oscillations originate from a tilted elliptical mean flow superposed with a symmetric higher order mode, which is connected to the four rolls in the plane perpendicular to the LSC in Γ = 1 tanks.

scholarly journals Precessional instability of a fluid cylinder

2011 ◽  
Vol 666 ◽  
pp. 104-145 ◽  
Author(s):  
ROMAIN LAGRANGE ◽  
PATRICE MEUNIER ◽  
FRANÇOIS NADAL ◽  
CHRISTOPHE ELOY
Keyword(s):  
Reynolds Number ◽  
Nonlinear Effects ◽  
Intermittent Flow ◽  
Mean Flow ◽  
Weakly Nonlinear ◽  
Weakly Nonlinear Theory ◽  
Aspect Ratios ◽  
Image Velocimetry ◽  
Precessional Motion ◽  
Weakly Nonlinear Model

In this paper, the instability of a fluid inside a precessing cylinder is addressed theoretically and experimentally. The precessional motion forces Kelvin modes in the cylinder, which can become resonant for given precessional frequencies and cylinder aspect ratios. When the Reynolds number is large enough, these forced resonant Kelvin modes eventually become unstable. A linear stability analysis based on a triadic resonance between a forced Kelvin mode and two additional free Kelvin modes is carried out. This analysis allows us to predict the spatial structure of the instability and its threshold. These predictions are compared to the vorticity field measured by particle image velocimetry with an excellent agreement. When the Reynolds number is further increased, nonlinear effects appear. A weakly nonlinear theory is developed semi-empirically by introducing a geostrophic mode, which is triggered by the nonlinear interaction of a free Kelvin mode with itself in the presence of viscosity. Amplitude equations are obtained coupling the forced Kelvin mode, the two free Kelvin modes and the geostrophic mode. They show that the instability saturates to a fixed point just above threshold. Increasing the Reynolds number leads to a transition from a steady saturated regime to an intermittent flow in good agreement with experiments. Surprisingly, this weakly nonlinear model still gives a correct estimate of the mean flow inside the cylinder even far from the threshold when the flow is turbulent.

A Model for High-Reynolds-Number Flow Past Rough-Walled Circular Cylinders

1977 ◽  
Vol 99 (3) ◽  
pp. 486-493 ◽  
Author(s):  
O. Gu¨ven ◽  
V. C. Patel ◽  
C. Farell
Keyword(s):  
Boundary Layer ◽  
Surface Roughness ◽  
Circular Cylinder ◽  
Turbulent Boundary Layer ◽  
Pressure Coefficient ◽  
Empirical Relation ◽  
Reynolds Numbers ◽  
Boundary Layer Separation ◽  
Circular Cylinders ◽  
Mean Flow

A simple analytical model for two-dimensional mean flow at very large Reynolds numbers around a circular cylinder with distributed roughness is presented and the results of the theory are compared with experiment. The theory uses the wake-source potential-flow model of Parkinson and Jandali together with an extension to the case of rough-walled circular cylinders of the Stratford-Townsend theory for turbulent boundary-layer separation. In addition, a semi-empirical relation between the base-pressure coefficient and the location of separation is used. Calculation of the boundary-layer development, needed as part of the theory, is accomplished using an integral method, taking into account the influence of surface roughness on the laminar boundary layer and transition as well as on the turbulent boundary layer. Good agreement with experiment is shown by the results of the theory. The significant effects of surface roughness on the mean-pressure distribution on a circular cylinder at large Reynolds numbers and the physical mechanisms giving rise to these effects are demonstrated by the model.

Reynolds-number dependence of wall-pressure fluctuations in a pressure-induced turbulent separation bubble

2017 ◽  
Vol 833 ◽  
pp. 563-598 ◽  
Author(s):  
Hiroyuki Abe
Keyword(s):  
Reynolds Number ◽  
Pressure Gradient ◽  
Large Scale ◽  
Separation Bubble ◽  
Pressure Fluctuations ◽  
Local Maximum ◽  
Wall Pressure ◽  
Mean Flow ◽  
Frequency Spectra ◽  
Wall Pressure Fluctuations

Direct numerical simulations are used to examine the behaviour of wall-pressure fluctuations $p_{w}$ in a flat-plate turbulent boundary layer with large adverse and favourable pressure gradients, involving separation and reattachment. The Reynolds number $Re_{\unicode[STIX]{x1D703}}$ based on momentum thickness is equal to 300, 600 and 900. Particular attention is given to effects of Reynolds number on root-mean-square (r.m.s.) values, frequency/power spectra and instantaneous fields. The possible scaling laws are also examined as compared with the existing direct numerical simulation and experimental data. The r.m.s. value of $p_{w}$ normalized by the local maximum Reynolds shear stress $-\unicode[STIX]{x1D70C}\overline{uv}_{max}$ (Simpson et al. J. Fluid Mech. vol. 177, 1987, pp. 167–186; Na & Moin J. Fluid Mech. vol. 377, 1998b, pp. 347–373) leads to near plateau (i.e. $p_{w\,rms}/-\unicode[STIX]{x1D70C}\overline{uv}_{max}=2.5\sim 3$) in the adverse pressure gradient and separated regions in which the frequency spectra exhibit good collapse at low frequencies. The magnitude of $p_{w\,rms}/-\unicode[STIX]{x1D70C}\overline{uv}_{max}$ is however reduced down to 1.8 near reattachment where good collapse is also obtained with normalization by the local maximum wall-normal Reynolds stress $\unicode[STIX]{x1D70C}\overline{vv}_{max}$. Near reattachment, $p_{w\,rms}/-\unicode[STIX]{x1D70C}\overline{vv}_{max}=1.2$ is attained unambiguously independently of the Reynolds number and pressure gradient. The present magnitude (1.2) is smaller than (1.35) obtained for step-induced separation by Ji & Wang (J. Fluid Mech. vol. 712, 2012, pp. 471–504). The reason for this difference is intrinsically associated with convective nature of a pressure-induced separation bubble near reattachment where the magnitude of $p_{w\,rms}$ depends essentially on the favourable pressure gradient. The resulting mean flow acceleration leads to delay of the r.m.s. peak after reattachment. Attention is also given to structures of $p_{w}$. It is shown that large-scale spanwise rollers of low pressure fluctuations are formed above the bubble, whilst changing to large-scale streamwise elongated structures after reattachment. These large-scale structures become more prominent with increasing $Re_{\unicode[STIX]{x1D703}}$ and affect $p_{w}$ significantly.

Experiments on the flow and acoustic properties of a moderate-Reynolds-number supersonic jet

1982 ◽  
Vol 116 ◽  
pp. 123-156 ◽  
Author(s):  
T. R. Troutt ◽  
D. K. Mclaughlin
Keyword(s):  
Reynolds Number ◽  
Large Scale ◽  
Near Field ◽  
Acoustic Properties ◽  
Generation Model ◽  
Initial Growth ◽  
Noise Generation ◽  
Mean Flow ◽  
Potential Core ◽  
Moderate Reynolds Number

An experimental investigation of the flow and acoustic properties of a moderate-Reynolds-number (Re = 70000), Mach number M = 2·1, axisymmetric jet has been performed. These measurements extended the experimental studies conducted previously in this laboratory to a higher-Reynolds-number regime where the flow and acoustic processes are considerably more complex. In fact, mean-flow and acoustic properties of this jet were determined to be closely comparable to published properties of high-Reynolds-number jets.The major results of the flow-field measurements demonstrate that the jet shear annulus is unstable over a broad frequency range. The initial growth rates and wavelengths of these instabilities as measured by a hot wire were found to be in reasonable agreement with linear stability theory predictions. Also, in agreement with subsonic-jet results, the potential core of the jet was found to be most responsive to excitation at frequencies near a Strouhal number of S = 0·3. The overall development of organized disturbances around S = 0·2 seems to agree in general with calculations performed using the instability theory originally developed by Morris and Tam.The acoustic near field was characterized in terms of sound-pressure level and directivity for both natural and excited (pure-tone) jets. In addition, propagation direction and azimuthal character of dominant spectral components were also measured. It was determined that the large-scale flow disturbances radiate noise in a directional pattern centred about 30° from the jet axis. The noise from these disturbances appears from simple ray tracing to be generated primarily near the region of the jet where the coherent fluctuations saturate in amplitude and begin to decay. It was also determined that the large-scale components of the near-field sound are made up predominately of axisymmetric (n = 0) and helical (n = ±1) modes. The dominant noise-generation mechanism appears to be a combination of Mach-wave generation and a process associated with the saturation and disintegration of the large-scale instability. Finally, the further development of a noise-generation model of the instability type appears to hold considerable promise.

Experimental Study of Vortex Shedding From a Solid Sphere in Turbulent Freestream

2005 ◽  
Author(s):  
Himanshu Tyagi ◽  
Rui Liu ◽  
David S.-K. Ting ◽  
Clifton R. Johnston
Keyword(s):  
Experimental Study ◽  
Reynolds Number ◽  
Flow Velocity ◽  
Vortex Shedding ◽  
Isotropic Turbulence ◽  
Vortex Formation ◽  
Perforated Plate ◽  
Solid Sphere ◽  
Mean Flow ◽  
Static Pressure Distribution

The study of vortex shedding from a sphere assumes an important role because of its relevance to numerous aerodynamic and hydrodynamic applications. Parameters such as coefficient of drag and static pressure distribution are largely influenced by vortex shedding, and it is found by past studies that the freestream turbulence can interact and alter the vortex formation and shedding drastically. Most of these studies, however, were conducted in the low Reynolds number regime and the vortex shedding results had been described only qualitatively. To better understand the aerodynamics of a sphere in turbulent flow, an experimental study was initiated in a low speed wind tunnel to quantify the vortex shedding characteristics. The Reynolds number of the flow, based on the diameter of the sphere (d), was set at 3.3 × 104, 5 × 104 and 6.6 × 104 by varying the mean flow velocity. The sphere was placed at 20D (= 7.5d) downstream from a perforated plate, where D = 37.5 mm is the size of the holes in the perforated plate, uniquely designed for generating near-isotropic turbulence. Hot-wire measurements were taken at 10D (= 3.75d), 20D (= 7.5d) and 30D (= 11.25d) downstream of the sphere in absence and presence of the perforated plate. The vortex shedding frequency was deduced from the instantaneous flow velocity data.

Generation mechanism of a hierarchy of vortices in a turbulent boundary layer

2019 ◽  
Vol 865 ◽  
pp. 1085-1109 ◽  
Author(s):  
Yutaro Motoori ◽  
Susumu Goto
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Energy Spectrum ◽  
Turbulent Boundary Layer ◽  
Large Scale ◽  
Generation Mechanism ◽  
Small Scale ◽  
Generation Process ◽  
Mean Flow ◽  
The Mean

To understand the generation mechanism of a hierarchy of multiscale vortices in a high-Reynolds-number turbulent boundary layer, we conduct direct numerical simulations and educe the hierarchy of vortices by applying a coarse-graining method to the simulated turbulent velocity field. When the Reynolds number is high enough for the premultiplied energy spectrum of the streamwise velocity component to show the second peak and for the energy spectrum to obey the$-5/3$power law, small-scale vortices, that is, vortices sufficiently smaller than the height from the wall, in the log layer are generated predominantly by the stretching in strain-rate fields at larger scales rather than by the mean-flow stretching. In such a case, the twice-larger scale contributes most to the stretching of smaller-scale vortices. This generation mechanism of small-scale vortices is similar to the one observed in fully developed turbulence in a periodic cube and consistent with the picture of the energy cascade. On the other hand, large-scale vortices, that is, vortices as large as the height, are stretched and amplified directly by the mean flow. We show quantitative evidence of these scale-dependent generation mechanisms of vortices on the basis of numerical analyses of the scale-dependent enstrophy production rate. We also demonstrate concrete examples of the generation process of the hierarchy of multiscale vortices.

Experimental Investigation of Free Stream Turbulence Effects on Flow Separation

2003 ◽  
Author(s):  
Mahmoud Ardebili ◽  
Yiannis Andreopoulos
Keyword(s):  
Boundary Layer ◽  
Experimental Investigation ◽  
Reynolds Number ◽  
Pressure Gradient ◽  
Flow Separation ◽  
Large Scale ◽  
Free Stream ◽  
Pressure Coefficient ◽  
Free Stream Turbulence ◽  
Vorticity Flux

An experimental investigation of a separated boundary layer flow has been attempted which has been created by perturbing a flat plate flow with a favorable pressure gradient immediately followed by an adverse pressure gradient. The aim of the research program is possible control of flow separation by means of free stream turbulence. The flow is configured in a large-scale low speed wind tunnel where measurements of turbulence can be obtained with high spatial and temporal resolution. A model has been designed by using CFD analysis. Mean wall pressure and vorticity flux measurements are reported in this paper. Twelve experiments with three different mesh size grids at three different Reynolds numbers have been carried out. Three bulk flow parameters seem to characterize the flow: The Reynolds number of the boundary layer, Re+, the Reynolds number of the flow through the grid, ReM, and the solidity of the grid. It was found that the pressure coefficient depends weakly on the solidity of the grids. Vorticity flux also depends on the grid used to generate free stream turbulence. The location of maximum or minimum vorticity flux moves upstream at higher ReM.

Stability of obliquely driven cavity flow

2021 ◽  
Vol 928 ◽  
Author(s):  
Pierre-Emmanuel des Boscs ◽  
Hendrik C. Kuhlmann
Keyword(s):  
Reynolds Number ◽  
Linear Stability ◽  
Couette Flow ◽  
Critical Reynolds Number ◽  
Cavity Flow ◽  
Basic Flow ◽  
Driven Cavity ◽  
Aspect Ratios ◽  
Driven Cavity Flow ◽  
Yaw Angle

The linear stability of the incompressible flow in an infinitely extended cavity with rectangular cross-section is investigated numerically. The basic flow is driven by a lid which moves tangentially, but at yaw with respect to the edges of the cavity. As a result, the basic flow is a superposition of the classical recirculating two-dimensional lid-driven cavity flow orthogonal to a wall-bounded Couette flow. Critical Reynolds numbers computed by linear stability analysis are found to be significantly smaller than data previously reported in the literature. This finding is confirmed by independent nonlinear three-dimensional simulations. The critical Reynolds number as a function of the yaw angle is discussed for representative aspect ratios. Different instability modes are found. Independent of the yaw angle, the dominant instability mechanism is based on the local lift-up process, i.e. by the amplification of streamwise perturbations by advection of basic flow momentum perpendicular to the sheared basic flow. For small yaw angles, the instability is centrifugal, similar as for the classical lid-driven cavity. As the spanwise component of the lid velocity becomes dominant, the vortex structures of the critical mode become elongated in the direction of the bounded Couette flow with the lift-up process becoming even more important. In this case the instability is made possible by the residual recirculating part of the basic flow providing a feedback mechanism between the streamwise vortices and the streamwise velocity perturbations (streaks) they promote. In the limit when the basic flow approaches bounded Couette flow the critical Reynolds number increases very strongly.

scholarly journals Surface-roughness effects on the mean flow past circular cylinders

1980 ◽  
Vol 98 (4) ◽  
pp. 673-701 ◽  
Author(s):  
O. Güven ◽  
C. Farell ◽  
V. C. Patel
Keyword(s):  
Boundary Layer ◽  
Surface Roughness ◽  
Pressure Rise ◽  
Boundary Layer Separation ◽  
Circular Cylinders ◽  
Mean Flow ◽  
Roughness Effects ◽  
Number Range ◽  
Mean Pressure ◽  
The Mean

Measurements of mean-pressure distributions and boundary-layer development on rough-walled circular cylinders in a uniform stream are described. Five sizes of distributed sandpaper roughness have been tested over the Reynolds-number range 7 × 104to 5·5 × 105. The results are examined together with those of previous investigators, and the observed roughness effects are discussed in the light of boundary-layer theory. It is found that there is a significant influence of surface roughness on the mean-pressure distribution even at very large Reynolds numbers. This observation is supported by an extension of the Stratford–Townsend theory of turbulent boundary-layer separation to the case of circular cylinders with distributed roughness. The pressure rise to separation is shown to be closely related, as expected, to the characteristics of the boundary layer, smaller pressure rises being associated with thicker boundary layers with greater momentum deficits. Larger roughness gives rise to a thicker and more retarded boundary layer which separates earlier and with a smaller pressure recovery.

Sign in / Sign up

Export Citation Format

Share Document