scholarly journals An Optimized Method for 3D Magnetic Navigation of Nanoparticles inside Human Arteries

Fluids ◽  
2021 ◽  
Vol 6 (3) ◽  
pp. 97
Author(s):  
Evangelos Karvelas ◽  
Christos Liosis ◽  
Andreas Theodorakakos ◽  
Ioannis Sarris ◽  
Theodoros Karakasidis

A computational method for optimum magnetic navigation of nanoparticles that are coated with anticancer drug inside the human vascular system is presented in this study. For this reason a 3D carotid model is employed. The present model use Computational Fluid Dynamics (CFD) and Discrete Element Method (DEM) techniques along with Covariance Matrix Adaptation (CMA) evolution strategy for the evaluation of the optimal values of the gradient magnetic field. Under the influence of the blood flow the model evaluates the effect of different values of the gradient magnetic field in order to minimize the distance of particles from a pre-described desired trajectory. Results indicate that the diameter of particles is a crucial parameter for an effective magnetic navigation. The present numerical model can navigate nanoparticles with diameter above 500 nm with an efficiency of approximately 99%. It is found that the velocity of the blood seems to play insignificant role in the navigation process. A reduction of 25% in the inlet velocity leads the particles only 3% closer to the desired trajectory. Finally, the computational method is more efficient as the diameter of the vascular system is minimized because of the weak convective flow. Under a reduction of 50% in the diameter of the carotid artery the computational method navigate the particles approximately 75% closer to the desired trajectory. The present numerical model can be used as a tool for the determination of the parameters that mostly affect the magnetic navigation method.

Author(s):  
Lingfeng Zhu ◽  
Yinshun Wang ◽  
Wei Liu ◽  
Yating Liu ◽  
Yang Nie ◽  
...  

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 328
Author(s):  
Kamil Anasiewicz ◽  
Józef Kuczmaszewski

This article is an evaluation of the phenomena occurring in adhesive joints during curing and their consequences. Considering changes in the values of Young’s modulus distributed along the joint thickness, and potential changes in adhesive strength in the cured state, the use of a numerical model may make it possible to improve finite element simulation effects and bring their results closer to experimental data. The results of a tensile test of a double overlap adhesive joint sample, performed using an extensometer, are presented. This test allowed for the precise determination of the shear modulus G of the cured adhesive under experimental conditions. Then, on the basis of the research carried out so far, a numerical model was built, taking the differences observed in the properties of the joint material into account. The stress distribution in a three-zone adhesive joint was analyzed in comparison to the standard numerical model in which the adhesive in the joint was treated as isotropic. It is proposed that a joint model with three-zones, differing in the Young’s modulus values, is more accurate for mapping the experimental results.


2019 ◽  
Vol 19 (8) ◽  
pp. 2879-2886 ◽  
Author(s):  
Song Feng ◽  
Leilei Yang ◽  
Guang Qiu ◽  
Jiufei Luo ◽  
Rui Li ◽  
...  

2015 ◽  
Vol 5 (1) ◽  
Author(s):  
Jair C. C. Freitas ◽  
Wanderlã L. Scopel ◽  
Wendel S. Paz ◽  
Leandro V. Bernardes ◽  
Francisco E. Cunha-Filho ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document