scholarly journals A Probabilistic Approach to Analyze Wind Energy Curtailment in Non-Interconnected Greek Islands Based on Typical Wind Year Meteorological Data

Fluids ◽  
2020 ◽  
Vol 5 (3) ◽  
pp. 123
Author(s):  
George Caralis ◽  
Alexandros Kontzilas ◽  
Yang Peijin ◽  
Petros Chasapogiannis ◽  
Vassiliki Kotroni ◽  
...  

Wind energy and photovoltaic solar energy (PV) are the most mature renewable energy technologies and are widely used to increase renewable energy penetration in non-interconnected Greek islands. However, their penetration is restricted due to technical issues related to the safe operation of autonomous power systems, the current conventional power infrastructure and their variable power output. In this framework, renewable energy curtailment is sometimes a necessity to ensure the balance between demand and supply. The ability of autonomous power systems to absorb wind and PV power is related to the load demand profile, the type and the flexibility of conventional power plants, the size of power system and the spatial dispersion of wind farms. In this connection, a probabilistic approach for estimating wind energy curtailment is thoroughly applied in most of the autonomous power systems in Greece, using detailed information about load demand and conventional power supply. In parallel, high resolution mesoscale model-based hourly wind data for typical meteorological wind year are used to represent the wind features in all the sites of interest. Technical constraints imposed by the local power system operator, related to the commitment of conventional power plants and the load dispatch strategies are taken into account to maximize renewable energy penetration levels. Finally, application for wide ranges of wind and PV capacity and the thorough analysis of the parameters leads to the presentation of comparable results and conclusions, which could be widely used to predict wind energy curtailment in non-interconnected power systems.

2020 ◽  
Author(s):  
Ana Fernández-Guillamón ◽  
Emilio Gómez-Lázaro ◽  
Eduard Muljadi ◽  
Ángel Molina-Garcia

Over recent decades, the penetration of renewable energy sources (RES), especially photovoltaic and wind power plants, has been promoted in most countries. However, as these both alternative sources have power electronics at the grid interface (inverters), they are electrically decoupled from the grid. Subsequently, stability and reliability of power systems are compromised. Inertia in power systems has been traditionally determined by considering all the rotating masses directly connected to the grid. Thus, as the penetration of renewable units increases, the inertia of the power system decreases due to the reduction of directly connected rotating machines. As a consequence, power systems require a new set of strategies to include these renewable sources. In fact, ‘hidden inertia,’ ‘synthetic inertia’ and ‘virtual inertia’ are terms currently used to represent an artificial inertia created by inverter control strategies of such renewable sources. This chapter reviews the inertia concept and proposes a method to estimate the rotational inertia in different parts of the world. In addition, an extensive discussion on wind and photovoltaic power plants and their contribution to inertia and power system stability is presented.


2011 ◽  
Vol 1 (4) ◽  
pp. 84-89
Author(s):  
E. A. Al-Ammar ◽  
N. H. Malik ◽  
M. Usman

One of the major world wide concerns of the utilities is to reduce the emissions from traditional power plants by using renewable energy and to reduce the high cost of supplying electricity to remote areas. Hybrid power systems can provide a good solution for such problems because they integrate renewable energy along with the traditional power plants. In Kingdom of Saudi Arabia a remote village called Al-Qtqt, was selected as a case study in order to investigate the ability to use a hybrid power system to provide the village with its needs of electricity. The simulation of this hybrid power system was done using HOMER software.


2019 ◽  
pp. 0309524X1987403 ◽  
Author(s):  
Aleksey A Zhidkov ◽  
Andrey A Achitaev ◽  
Mikhail V Kashurnikov

The urgency of developing renewable power generation in Russia is associated with the presence of a large number of regions with a low degree of electrification. More than two-thirds of the territory of Russia is located in the area of decentralized power supply, where the main source of energy is imported diesel fuel or associated gas from local fields. At present, one of the directions for the development of renewable power generation in Russia is the implementation of a hybrid power supply system for autonomous power systems of remote regions. However, along with the possibility of using renewable energy sources, it is important for such regions to generate heat from co-generation of diesel power plants, since there is an urgent problem of heat supply for remote regions, especially located in the Far North of Russia. This article presents an analysis of the influence of using renewable energy sources in autonomous power systems on co-generation of diesel power plants.


2021 ◽  
Author(s):  
◽  
Dhanpal Chetty

Over the last decade, power generation from renewable energy sources such as wind, hydro and solar energies have substantially increased globally and in South Africa. Of all the renewable energy sources, wind energy appears to be the most promising, considering design and costs. However, due to the intermittent nature of wind, the increased integration of wind energy into existing power systems raises several control challenges related to load frequency control (LFC) and tie-line power system stability. The stability of modern power systems, incorporating wind energy generations, will be significantly enhanced with the development of LFC strategies based on modern control theory, which is the focus of this research. This thesis presents the design, modelling and analysis, of two LFC control strategies for interconnected power systems, having wind power integrations. The first design is an optimal control strategy, based on error minimization through full state vector feedback, for a two-area interconnected power system consisting of hydro-thermal generations. The second design is a model predictive control (MPC) strategy, based output vector feedback of system state parameters, for a two-area interconnected power system consisting of thermal generations in each area. Both designs include the active power support from doubly fed induction generator based wind turbines (DFIG) in conjunction with the combined effort of a thyristor control phase shifter (TCPS) and super conducting magnetic energy storage unit (SMES). Both control strategies were simulated in MATLAB Simulink and positive results were obtained. The results show that the optimal control strategy is enhanced with power integrations using DFIG based wind turbines combined with the TCPS-SMES units and the MPC strategy is very robust and provides better dynamic performances even with parameter variations and generation rate restrictions.


Energies ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 5903 ◽  
Author(s):  
Handrea Bernando Tambunan ◽  
Dzikri Firmansyah Hakam ◽  
Iswan Prahastono ◽  
Anita Pharmatrisanti ◽  
Andreas Putro Purnomoadi ◽  
...  

Nowadays, the integration of renewable energy sources, especially grid-connected photovoltaic, into electrical power systems, is increasing dramatically. There are several stimulants especially in the Java-Bali power system, including huge solar potential, a national renewable energy (RE) target, regulation support for prosumers, photovoltaic technology development, and multi-year power system planning. However, significant annual photovoltaic penetration can lead to critical issues, including a drop of netload during the day, ramping capability, and minimal load operation for thermal power plants. This study analyses the duck curve phenomenon in the Java-Bali power system that considers high shares of the baseload power plant and specific scenarios in photovoltaic (PV) penetration and electricity demand growth. This study also analyses future netload, need for fast ramping rate capability, and oversupply issues in the Java-Bali power system. The results showed that the duck curve phenomenon appears with a significant netload drop in the middle of the day because of high power generation from grid-connected PV. Furthermore, the need for fast ramp rate capability is critical for a higher peak load combined with the lowest netload valley. Moreover, the significant load growth with high grid-connected PV penetration level caused unit commitment issues for thermal power plants as baseload operators.


Author(s):  
B. Venkateswara Rao ◽  
Ramesh Devarapalli ◽  
H. Malik ◽  
Sravana Kumar Bali ◽  
Fausto Pedro García Márquez ◽  
...  

The trend of increasing demand creates a gap between generation and load in the field of electrical power systems. This is one of the significant problems for the science, where it require to add new generating units or use of novel automation technology for the better utilization of the existing generating units. The automation technology highly recommends the use of speedy and effective algorithms in optimal parameter adjustment for the system components. So newly developed nature inspired Bat Algorithm (BA) applied to discover the control parameters. In this scenario, this paper considers the minimization of real power generation cost with emission as an objective. Further, to improve the power system performance and reduction in the emission, two of the thermal plants were replaced with wind power plants. In addition, to boost the voltage profile, Static VAR Compensator (SVC) has been integrated. The proposed case study, i.e., considering wind plant and SVC with BA, is applied on the IEEE30 bus system. Due to the incorporation of wind plants into the system, the emission output is reduced, and with the application of SVC voltage profile improved.


Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1379
Author(s):  
Md Ruhul Amin ◽  
Michael Negnevitsky ◽  
Evan Franklin ◽  
Kazi Saiful Alam ◽  
Seyed Behzad Naderi

In power systems, high renewable energy penetration generally results in conventional synchronous generators being displaced. Hence, the power system inertia reduces, thus causing a larger frequency deviation when an imbalance between load and generation occurs, and thus potential system instability. The problem associated with this increase in the system’s dynamic response can be addressed by various means, for example, flywheels, supercapacitors, and battery energy storage systems (BESSs). This paper investigates the application of BESSs for primary frequency control in power systems with very high penetration of renewable energy, and consequently, low levels of synchronous generation. By re-creating a major Australian power system separation event and then subsequently simulating the event under low inertia conditions but with BESSs providing frequency support, it has been demonstrated that a droop-controlled BESS can greatly improve frequency response, producing both faster reaction and smaller frequency deviation. Furthermore, it is shown via detailed investigation how factors such as available battery capacity and droop coefficient impact the system frequency response characteristics, providing guidance on how best to mitigate the impact of future synchronous generator retirements. It is intended that this analysis could be beneficial in determining the optimal BESS capacity and droop value to manage the potential frequency stability risks for a future power system with high renewable energy penetrations.


2019 ◽  
Vol 11 (16) ◽  
pp. 4424 ◽  
Author(s):  
Chunning Na ◽  
Huan Pan ◽  
Yuhong Zhu ◽  
Jiahai Yuan ◽  
Lixia Ding ◽  
...  

At present time, China’s power systems face significant challenges in integrating large-scale renewable energy and reducing the curtailed renewable energy. In order to avoid the curtailment of renewable energy, the power systems need significant flexibility requirements in China. In regions where coal is still heavily relied upon for generating electricity, the flexible operations of coal power units will be the most feasible option to face these challenges. The study first focused on the reasons why the flexible operation of existing coal power units would potentially promote the integration of renewable energy in China and then reviewed the impacts on the performance levels of the units. A simple flexibility operation model was constructed to estimate the integration potential with the existing coal power units under several different scenarios. This study’s simulation results revealed that the existing retrofitted coal power units could provide flexibility in the promotion of the integration of renewable energy in a certain extent. However, the integration potential increment of 20% of the rated power for the coal power units was found to be lower than that of 30% of the rated power. Therefore, by considering the performance impacts of the coal power units with low performances in load operations, it was considered to not be economical for those units to operate at lower than 30% of the rated power. It was believed that once the capacity share of the renewable energy had achieved a continuously growing trend, the existing coal power units would fail to meet the flexibility requirements. Therefore, it was recommended in this study that other flexible resources should be deployed in the power systems for the purpose of reducing the curtailment of renewable energy. Furthermore, based on this study’s obtained evidence, in order to realize a power system with high proportions of renewable energy, China should strive to establish a power system with adequate flexible resources in the future.


2013 ◽  
Vol 2013 ◽  
pp. 1-6
Author(s):  
Meng-Hui Wang

Due to the complex parameters of a solar power system, the designer not only must think about the load demand but also needs to consider the price, weight, and annual power generating capacity (APGC) and maximum power of the solar system. It is an important task to find the optimal solar power system with many parameters. Therefore, this paper presents a novel decision-making method based on the extension theory; we call it extension decision-making method (EDMM). Using the EDMM can make it quick to select the optimal solar power system. The paper proposed this method not only to provide a useful estimated tool for the solar system engineers but also to supply the important reference with the installation of solar systems to the consumer.


2018 ◽  
Vol 8 (9) ◽  
pp. 1453 ◽  
Author(s):  
Huanan Liu ◽  
Dezhi Li ◽  
Yuting Liu ◽  
Mingyu Dong ◽  
Xiangnan Liu ◽  
...  

With the rapid development of industry, more fossil energy is consumed to generate electricity, which increases carbon emissions and aggravates the burden of environmental protection. To reduce carbon emissions, traditional centralized power generation networks are transforming into distributed renewable generation systems. However, the deployment of distributed generation systems can affect power system economy and stability. In this paper, under different time scales, system economy, stability, carbon emissions, and renewable energy fluctuation are comprehensively considered to optimize battery and super-capacitor installation capacity for an off-grid power system. After that, based on the genetic algorithm, this paper shows the optimal system operation strategy under the condition of the theoretical best energy storage capacity. Finally, the theoretical best capacity is tested under different renewable energy volatility rates. The simulation results show that by properly sizing the storage system’s capacity, although the average daily costs of the system can increase by 10%, the system’s carbon emissions also reduce by 42%. Additionally, the system peak valley gap reduces by 23.3%, and the renewable energy output’s fluctuation range and system loss of load probability are successfully limited in an allowable range. Lastly, it has less influence on the theoretical best energy storage capacity if the renewable energy volatility rate can be limited to within 10%.


Sign in / Sign up

Export Citation Format

Share Document