scholarly journals Impact of Radiative Losses on Flame Acceleration and Deflagration to Detonation Transition of Lean Hydrogen-Air Mixtures in a Macro-Channel with Obstacles

Fluids ◽  
2018 ◽  
Vol 3 (4) ◽  
pp. 104 ◽  
Author(s):  
Gautham Krishnamoorthy ◽  
Lucky Mulenga
Keyword(s):  
Combustion Wave ◽  
Computational Cost ◽  
Scaling Analysis ◽  
Small Surface ◽  
Flame Acceleration ◽  
System Pressure ◽  
Micro Channels ◽  
Radiative Losses ◽  
Run Up ◽  
The Impact

While there has been some recognition regarding the impact of thermal boundary conditions (adiabatic versus isothermal) on premixed flame propagation mechanisms in micro-channels (hydraulic diameters <10 mm), their impact in macro-channels has often been overlooked due to small surface-area-to-volume ratios of the propagating combustion wave. Further, the impact of radiative losses has also been neglected due to its anticipated insignificance based on scaling analysis and the high computational cost associated with resolving it’s spatial, temporal, directional, and wavelength dependencies. However, when channel conditions promote flame acceleration and deflagration-to-detonation transitions (DDT), large pressures are encountered in the vicinity of the combustion wave, thereby increasing the magnitude of radiative losses which in turn can impact the strength and velocity of the combustion wave. This is demonstrated for the first time through simulations of lean (equivalence ratio: 0.5) hydrogen-air mixtures in a macro-channel (hydraulic diameter: 174 mm) with obstacles (Blockage ratio: 0.51). By employing Planck mean absorption coefficients in conjunction with the P-1 radiation model, radiative losses are shown to affect the run-up distances to DDT in a long channel (length: 11.878 m). As anticipated, the differences in run-up distances resulting from radiative losses only increased with system pressure.

scholarly journals Computational Study of Premixed Flame Propagation in Micro-Channels with Nonslip Walls: Effect of Wall Temperature

Fluids ◽  
2021 ◽  
Vol 6 (1) ◽  
pp. 36
Author(s):  
Orlando J. Ugarte ◽  
V’yacheslav Akkerman
Keyword(s):  
Flame Propagation ◽  
Computational Study ◽  
Reacting Flow ◽  
Narrow Channels ◽  
Flow Equations ◽  
Flame Acceleration ◽  
Flame Dynamics ◽  
Micro Channels ◽  
Fuel Mixtures ◽  
The Impact

This investigation evaluates the propagation of premixed flames in narrow channels with isothermal walls. The study is based on the numerical solution of the set of fully-compressible, reacting flow equations that includes viscosity, diffusion, thermal conduction and Arrhenius chemical kinetics. Specifically, channels and pipes with one extreme open and one extreme closed are considered such that a flame is sparked at the closed extreme and propagates towards the open one. The isothermal channel walls are kept at multiple constant temperatures in the range from Tw=300 K to 1200 K. The impact of these isothermal walls on the flame dynamics is studied for multiple radii of the channel (R) and for various thermal expansion ratios (Θ), which approximate the thermal behavior of different fuel mixtures in the system. The flame dynamics in isothermal channels is also compared to that with adiabatic walls, which were previously found to produce exponential flame acceleration at the initial stage of the burning process. The results show that the heat losses at the walls prevent strong acceleration and lead to much slower flame propagation in isothermal channels as compared to adiabatic ones. Four distinctive regimes of premixed burning in isothermal channels have been identified in the Θ−Tw−R space: (i) flame extinction; (ii) linear flame acceleration; (iii) steady or near-steady flame propagation; and (iv) flame oscillations. The physical processes in each of these regimes are discussed, and the corresponding regime diagrams are presented.

scholarly journals Analysis of Gaseous and Gaseous-Dusty, Premixed Flame Propagation in Obstructed Passages with Tightly Placed Obstacles

Fluids ◽  
2020 ◽  
Vol 5 (3) ◽  
pp. 115
Author(s):  
Furkan Kodakoglu ◽  
Sinan Demir ◽  
Damir Valiev ◽  
V’yacheslav Akkerman
Keyword(s):  
Flame Propagation ◽  
Premixed Flame ◽  
Dust Particles ◽  
Blockage Ratio ◽  
Two Dimensional ◽  
Analytical Formulation ◽  
Flame Acceleration ◽  
Explosive Materials ◽  
Run Up ◽  
The Impact

A recent predictive scenario of premixed flame propagation in unobstructed passages is extended to account for obstructions that can be encountered in facilities dealing with explosive materials such as in coalmines. Specifically, the theory of globally-spherical, self-accelerating premixed expanding flames and that of flame acceleration in obstructed conduits are combined to form a new analytical formulation. The coalmining configuration is imitated by two-dimensional and cylindrical passages of high aspect ratio, with a comb-shaped array of tightly placed obstacles attached to the walls. It is assumed that the spacing between the obstacles is much less or, at least, does not exceed the obstacle height. The passage has one extreme open end such that a flame is ignited at a closed end and propagates to an exit. The key stages of the flame evolution such as the velocity of the flame front and the run-up distance are scrutinized for variety of the flame and mining parameters. Starting with gaseous methane-air and propane-air flames, the analysis is subsequently extended to gaseous-dusty environments. Specifically, the coal (combustible, i.e., facilitating the fire) and inert (such as sand, moderating the process) dust and their combinations are considered, and the impact of the size and concentration of the dust particles on flame acceleration is quantified. Overall, the influence of both the obstacles and the combustion instability on the fire scenario is substantial, and it gets stronger with the blockage ratio.

The Influence of Disintegration of Hard Coal Varieties of Different Metamorphism Grade on the Amount of Sorbed Ethane / Wpływ rozdrobnienia odmian węgla kamiennego o różnym stopniu metamorfizmu na ilości sorbowanego etanu

2013 ◽  
Vol 58 (2) ◽  
pp. 449-463 ◽  
Author(s):  
Mieczysław Żyła ◽  
Agnieszka Dudzińska ◽  
Janusz Cygankiewicz
Keyword(s):  
Sorption Isotherms ◽  
Electron Donors ◽  
Hard Coal ◽  
Coal Surface ◽  
Compact Layer ◽  
Compact Structure ◽  
Small Surface ◽  
Mining Works ◽  
The Impact ◽  
Content Of Oxygen

Ethane constitutes an explosive gas. It most often accompanies methane realizing during exploitation and mining works. In this paper the results of ethane sorption have been discussed on three grain classes of six selected hard coal samples collected from active Polish coalmines. On the basis of obtained results, it has been stated that the tested hard coals prove differentiated sorption power with reference to ethane. Te extreme amount of ethane is sorbed by low carbonized hard coal from “Jaworzno” coalmine. This sort of coal shows great porosity, and great content of oxygen and moisture. The least amount of ethane is sorbed by hard coal from “Sośnica” coalmine. This sort of coal possesses relatively a great deal of ash contents. Together with the process of coal disintegration, the amount of sorbed ethane increases for all tested coal samples. Between tested coals there are three medium carbonized samples collected from “Pniówek”, “Chwałowice” “Zofiówka” coalmines which are characterized by small surface values counted according to model BET from nitrogen sorption isotherms determined at the temperature of 77.5 K. The samples of these three coals prove the highest, from between tested coals, increase of ethane sorption occurring together with their disintegration. These samples disintegrated to 0,063-0,075 mm grain class sorb ethane in the amount corresponding with the sorption quantity of low carbonized coal from “Jaworzno” coalmine in 0.5-0.7 mm grain class. It should be marked that the low carbonized samples collected from “Jaworzno” and Wesoła” coalmines possess large specific surface and great porosity and belong to coal group of “loose” spatial structure. Regarding profusion of sorbed ethane on disintegrated medium carbonized samples from “Pniówek”, “Zofiówka”, “Chwałowice” coalmines it can be supposed that in the process of coal disintegration, breaking their “compact’ structure occurs. Loosened structure of medium carbonized coals results in increasing accessibility of ethane particles to sorption centres both electron donors and electron acceptors which are present on hard coal surface. The surface sorption centre increase may result in formation a compact layer of ethane particles on coal surface. In the formed layer, not only the strengths of vertical binding of ethane particles with the coal surface appear but also the impact of horizontal strengths appears which forms a compact layer of sorbed ethane particles. The surface layer of ethane particles may lead to explosion.

scholarly journals Run-Up Simulation of a Semi-Floating Ring Supported Turbocharger Rotor Considering Thrust Bearing and Mass-Conserving Cavitation

Lubricants ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 44
Author(s):  
Christian Ziese ◽  
Cornelius Irmscher ◽  
Steffen Nitzschke ◽  
Christian Daniel ◽  
Elmar Woschke
Keyword(s):  
Reynolds Equation ◽  
Energy Equation ◽  
Thrust Bearing ◽  
Three Dimensional ◽  
Reliable Prediction ◽  
Two Phase ◽  
Hydrodynamic Bearings ◽  
Thrust Bearings ◽  
Run Up ◽  
The Impact

The vibration behaviour of turbocharger rotors is influenced by the acting loads as well as by the type and arrangement of the hydrodynamic bearings and their operating condition. Due to the highly non-linear bearing behaviour, lubricant film-induced excitations can occur, which lead to sub-synchronous rotor vibrations. A significant impact on the oscillation behaviour is attributed to the pressure distribution in the hydrodynamic bearings, which is influenced by the thermo-hydrodynamic conditions and the occurrence of outgassing processes. This contribution investigates the vibration behaviour of a floating ring supported turbocharger rotor. For detailed modelling of the bearings, the Reynolds equation with mass-conserving cavitation, the three-dimensional energy equation and the heat conduction equation are solved. To examine the impact of outgassing processes and thrust bearing on the occurrence of sub-synchronous rotor vibrations separately, a variation of the bearing model is made. This includes run-up simulations considering or neglecting thrust bearings and two-phase flow in the lubrication gap. It is shown that, for a reliable prediction of sub-synchronous vibrations, both the modelling of outgassing processes in hydrodynamic bearings and the consideration of thrust bearing are necessary.

scholarly journals Accuracy and Reliability in the Simulation of Vibrational Spectra: A Comprehensive Benchmark of Energies and Intensities Issuing From Generalized Vibrational Perturbation Theory to Second Order (GVPT2)

2021 ◽  
Vol 8 ◽  
Author(s):  
Qin Yang ◽  
Marco Mendolicchio ◽  
Vincenzo Barone ◽  
Julien Bloino
Keyword(s):  
Perturbation Theory ◽  
Electronic Structure ◽  
Density Functional ◽  
Computational Cost ◽  
Theoretical Data ◽  
Infrared Region ◽  
Second Order ◽  
Basis Set ◽  
Molecular Systems ◽  
The Impact

Vibrational spectroscopy represents an active frontier for the identification and characterization of molecular species in the context of astrochemistry and astrobiology. As new missions will provide more data over broader ranges and at higher resolution, especially in the infrared region, which could be complemented with new spectrometers in the future, support from laboratory experiments and theory is crucial. In particular, computational spectroscopy is playing an increasing role in deepening our understanding of the origin and nature of the observed bands in extreme conditions characterizing the interstellar medium or some planetary atmospheres, not easily reproducible on Earth. In this connection, the best compromise between reliability, feasibility and ease of interpretation is still a matter of concern due to the interplay of several factors in determining the final spectral outcome, with larger molecular systems and non-covalent complexes further exacerbating the dichotomy between accuracy and computational cost. In this context, second-order vibrational perturbation theory (VPT2) together with density functional theory (DFT) has become particularly appealing. The well-known problem of the reliability of exchange-correlation functionals, coupled with the treatment of resonances in VPT2, represents a challenge for the determination of standardized or “black-box” protocols, despite successful examples in the literature. With the aim of getting a clear picture of the achievable accuracy and reliability of DFT-based VPT2 calculations, a multi-step study will be carried out here. Beyond the definition of the functional, the impact of the basis set and the influence of the resonance treatment in VPT2 will be analyzed. For a better understanding of the computational aspects and the results, a short summary of vibrational perturbation theory and the overall treatment of resonances for both energies and intensities will be given. The first part of the benchmark will focus on small molecules, for which very accurate experimental and theoretical data are available, to investigate electronic structure calculation methods. Beyond the reliability of energies, widely used for such systems, the issue of intensities will also be investigated in detail. The best performing electronic structure methods will then be used to treat larger molecular systems, with more complex topologies and resonance patterns.

scholarly journals Technical note: PMR – a proxy metric to assess hydrological model robustness in a changing climate

2021 ◽  
Author(s):  
Paul Royer-Gaspard ◽  
Vazken Andréassian ◽  
Guillaume Thirel
Keyword(s):  
Hydrological Model ◽  
Evaluation Studies ◽  
Computational Cost ◽  
Climatic Conditions ◽  
Technical Note ◽  
Performance Metric ◽  
Reliable Assessment ◽  
Sample Test ◽  
The Impact ◽  
Model Robustness

Abstract. The ability of hydrological models to perform in climatic conditions different from those encountered in calibration is crucial to ensure a reliable assessment of the impact of climate change in water management sectors. However, most evaluation studies based on the Differential Split-Sample Test (DSST) endorsed the consensus that rainfall-runoff models lack climatic robustness. Models typically exhibit substantial errors on streamflow volumes applied under climatologically different conditions. In this technical note, we propose a new performance metric to evaluate model robustness without applying the DSST and which performs with a single hydrological model calibration. The Proxy for Model Robustness (PMR) is based on the systematic computation of model error on sliding sub-periods of the whole streamflow time series. We demonstrate that the metric shows patterns similar to those obtained with the DSST for a conceptual model on a set of 377 French catchments. An analysis of sensitivity to the length of the sub-periods shows that this length influences the values of the PMR and its adequation with DSST biases. We recommend a range of a few years for the choice of sub-period lengths, although this should be context-dependent. Our work makes it possible to evaluate the temporal transferability of any hydrological model, including uncalibrated models, at a very low computational cost.

Operation Principle and Simulation of Loop-Type Microfluidic Biochips

2006 ◽  
Vol 505-507 ◽  
pp. 649-654
Author(s):  
Yaw-Jen Chang ◽  
Yeon Pun Chang ◽  
Kai Yuan Cheng
Keyword(s):  
Pcr Amplification ◽  
Channel Length ◽  
Biochemical Reactions ◽  
Chip Design ◽  
Micro Channels ◽  
Loop Channel ◽  
Impact Area ◽  
Tangent Direction ◽  
Polymerase Chain ◽  
The Impact

Biochip is an emerging technology and has evoked great research interests in recent years. In this paper, a novel air-driven loop-type microfluidic biochip was investigated. Differing from conventional micro channels, this chip has a micro loop-channel and 3 sets of driving conduits with valveless design in their intersections so that the microfluid can be driven smoothly in unidirectional circular movements. The driving efficiency reaches the highest if the entry angle of driving conduits is in the tangent direction of the loop-channel. However, the smaller the included angle, the impact area the larger, leading to comparatively serious reflow phenomenon. Furthermore, the microfluid can be controlled to stop almost instantaneously in the loop segment. Therefore, this loop-type biochip is suitable for biochemical reactions under repeated multiple temperature operations such as polymerase chain reaction. A full circular movement completes a cycle of PCR amplification. Besides, this biochip has its merits including simpler chip design, shorter channel length, and flexible controllability for biochemical reactions.

Impact of CF4 Plasma Treatment on the Surface Roughness of Ion Implanted SiC Induced by High Temperature Annealing

2010 ◽  
Vol 645-648 ◽  
pp. 783-786
Author(s):  
Tatsunori Sugimoto ◽  
Masataka Satoh ◽  
Tohru Nakamura ◽  
K. Mashimo ◽  
Hiroshi Doi ◽  
...  
Keyword(s):  
Surface Roughness ◽  
High Temperature ◽  
Energy Range ◽  
Plasma Treatment ◽  
Surface Roughening ◽  
High Temperature Annealing ◽  
Small Surface ◽  
Step Structure ◽  
The Impact ◽  
Ion Implanted

The impact of CF4 plasma treatment on the surface roughening of SiC has been investigated for N ion implanted SiC(0001) which is implanted with the energy range from 15 to 120 keV at a dose of 9.2 x 1014/cm2. The N ion implanted sample, which is processed by CF4 plasma, shows small surface roughness of 1.6 nm after annealing at 1700 oC for 10 min, while the sample without CF4 plasma treatment shows the large surface roughness (6.6nm) and micro step structure. XPS measurements reveals that CF4 plasma treatment is effective to dissolved the residual oxide on the surface of SiC which is not removed by BHF acid of SiO2 layer on SiC. It is strongly suggested that the formation of micro step structure with the increase of the surface roughness is promoted by the residual oxide such as SiCOx, on SiC.

Coupled processes in an ocean-sea ice-wave configuration

2021 ◽  
Author(s):  
Stefanie Rynders ◽  
Yevgeny Aksenov ◽  
Andrew Coward
Keyword(s):  
Sea Ice ◽  
Surface Waves ◽  
Wave Attenuation ◽  
Computational Cost ◽  
Breaking Waves ◽  
Coupled Processes ◽  
Computational Power ◽  
Marine Systems ◽  
Ocean Surface Waves ◽  
The Impact

&lt;p&gt;Marginal ice zones are areas with many interactions between ocean, surface waves, sea ice and atmosphere. Increasing computational power makes it possible to perform increasingly complex simulations of marine systems, with more components of the climate system that are more interacting. We have produced a set of increasingly coupled simulations with NEMO, CICE and WW3, exchanging more and more variables. The configuration is global at 1 degree resolution. The focus is on wave attenuation in sea ice and the impact of using modelled wave height for ocean mixing due to breaking waves. The example simulations give an idea of the possible impact on the simulated state versus the still considerable computational cost.&lt;/p&gt;

Pre-Clinical Applications of High-Definition Manometry System to Investigate Pelvic Floor Muscle Contribution to Continence Mechanisms in a Rabbit Model

2021 ◽  
Author(s):  
Samuel Sorkhi ◽  
Youngjin Seo ◽  
Valmik Bhargava ◽  
Mahadevan Raj Rajasekaran
Keyword(s):  
Electrical Stimulation ◽  
Anal Canal ◽  
Dynamic Pressure ◽  
Rabbit Model ◽  
Puborectalis Muscle ◽  
High Definition ◽  
System Pressure ◽  
Vaginal Canal ◽  
The Impact ◽  
Stimulation Of

External anal sphincter (EAS), external urethral sphincters and puborectalis muscle (PRM) have important roles in the genesis of anal and urethral closure pressures. In the present study, we defined the contribution of these muscles alone and in combination to the sphincter closure function using a rabbit model and a high-definition manometry (HDM) system. A total of 12 female rabbits were anesthetized and prepared to measure anal, urethral, and vaginal canal pressures using a HDM system. Pressure was recorded at rest, and during electrical stimulation of the EAS and PRM. A few rabbits (n=6) were subjected to EAS injury and the impact of EAS injury on the closure pressure profile was also evaluated. Anal, urethral, and vaginal canal pressures recorded at rest and during electrical stimulation of EAS and PRM demonstrated distinct pressure profiles. EAS stimulation induced anal canal pressure increase whereas PRM stimulation increased the pressures in all the three orifices. Electrical stimulation of EAS after injury resulted in about 19% decrease in anal canal pressure. Simultaneous electrical stimulation of EAS and PRM resulted in an insignificant increase of individual anal canal pressures when compared to pressures recorded after EAS or PRM stimulations alone. Our data confirm that HDM is a viable system to measure dynamic pressure changes within the three orifices and to define the role of each muscle in the development of closure pressures within these orifices in preclinical studies.

Sign in / Sign up

Export Citation Format

Share Document