scholarly journals Development and Multiscale Characterization of 3D Warp Interlock Flax Fabrics with Different Woven Architectures for Composite Applications

Fibers ◽  
2020 ◽  
Vol 8 (2) ◽  
pp. 15 ◽  
Author(s):  
Henri Lansiaux ◽  
Damien Soulat ◽  
François Boussu ◽  
Ahmad Rashed Labanieh
Keyword(s):  
Mechanical Properties ◽  
Natural Fibers ◽  
Three Dimensional ◽  
Tensile Tests ◽  
Woven Fabrics ◽  
Flax Fiber ◽  
Raw Material ◽  
Mechanical Tensile

Multiscale characterization of the textile preform made of natural fibers is an indispensable way to understand and assess the mechanical properties and behavior of composite. In this study, a multiscale experimental characterization is performed on three-dimensional (3D) warp interlock woven fabrics made of flax fiber on the fiber (micro), roving (meso), and fabric (macro) scales. The mechanical tensile properties of the flax fiber were determined by using the impregnated fiber bundle test. The effect of the twist was considered in the back-calculation of the fiber stiffness to reveal the calculation limits of the rule of mixture. Tensile tests on dry rovings were carried out while considering different twist levels to determine the optimal amount of twist required to weave the flax roving into a 3D warp interlock. Finally, at fabric-scale, six different 3D warp interlock architectures were woven to understand the role of the architecture of binding rovings on the mechanical properties of the dry 3D fabric. The results reveal the importance of considering the properties of the fiber and roving at these scales to determine the more adequate raw material for weaving. Further, the characterization of the 3D woven structures shows the preponderant role of the binding roving on their structural and mechanical properties.

Modelling and characterization of textile structural composites: A review

1989 ◽  
Vol 24 (4) ◽  
pp. 253-262 ◽  
Author(s):  
J-H Byun ◽  
T-W Chou
Keyword(s):  
Mechanical Properties ◽  
Three Dimensional ◽  
Woven Fabrics ◽  
Analytical Models ◽  
Knitted Fabrics ◽  
Analysis And Design ◽  
Fabric Composites ◽  
Modelling Techniques ◽  
Braided Structure

The development of innovative fibre architecture, such as two- and three-dimensional woven fabrics and knitted fabrics, as well as braided structure, provides an attractive form of reinforcement for advanced composites. These new materials require new techniques in analysis and design in order to fully utilize their unique mechanical properties. Several analytical models for predicting the thermoelastic properties of two- and three-dimensional fabric composites are reviewed in this paper. The applicability and limitation of the modelling techniques are examined. Recent advancements in the characterization of mechanical properties of three-dimensional fabric composites are also presented. Overall, three-dimensionally braided, angle interlock and orthogonal interlock fabric composites have demonstrated significant improvement in damage tolerance.

scholarly journals Fabrication of Biocompatible Polycaprolactone–Hydroxyapatite Composite Filaments for the FDM 3D Printing of Bone Scaffolds

2021 ◽  
Vol 11 (14) ◽  
pp. 6351
Author(s):  
Chang Geun Kim ◽  
Kyung Seok Han ◽  
Sol Lee ◽  
Min Cheol Kim ◽  
Soo Young Kim ◽  
...  
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Bone Structure ◽  
Three Dimensional ◽  
Tensile Tests ◽  
Raw Material ◽  
Fused Deposition ◽  
Bone Scaffolds ◽  
3D Printed ◽  
Mechanical Tensile

Recently, three-dimensional printing (3DP) technology has been widely adopted in biology and biomedical applications, thanks to its capacity to readily construct complex 3D features. Using hot-melt extrusion 3DP, scaffolds for bone tissue engineering were fabricated using a composite of biodegradable polycaprolactone (PCL) and hydroxyapatite (HA). However, there are hardly any published reports on the application of the fused deposition modeling (FDM) method using feed filaments, which is the most common 3D printing method. In this study, we report on the fabrication and characterization of biocompatible filaments made of polycaprolactone (PCL)/hydroxyapatite (HA), a raw material mainly used for bone scaffolds, using FDM 3D printing. A series of filaments with varying HA content, from 5 to 25 wt.%, were fabricated. The mechanical and electrical properties of the various structures, printed using a commercially available 3D printer, were examined. Specifically, mechanical tensile tests were performed on the 3D-printed filaments and specimens. In addition, the electrical dielectric properties of the 3D-printed structures were investigated. Our method facilitates the fabrication of biocompatible structures using FDM-type 3DP, creating not only bone scaffolds but also testbeds for mimicking bone structure that may be useful in various fields of study.

scholarly journals Rheological Characterization of a Concentrated Phosphate Slurry

Fluids ◽  
2021 ◽  
Vol 6 (5) ◽  
pp. 178
Author(s):  
Souhail Maazioui ◽  
Abderrahim Maazouz ◽  
Fayssal Benkhaldoun ◽  
Driss Ouazar ◽  
Khalid Lamnawar
Keyword(s):  
Flow Behavior ◽  
Continuous Phase ◽  
Raw Material ◽  
Rheological Characterization ◽  
Phosphate Ore ◽  
Insoluble Particles ◽  
Experimental Protocols ◽  
Solid Liquid

Phosphate ore slurry is a suspension of insoluble particles of phosphate rock, the primary raw material for fertilizer and phosphoric acid, in a continuous phase of water. This suspension has a non-Newtonian flow behavior and exhibits yield stress as the shear rate tends toward zero. The suspended particles in the present study were assumed to be noncolloidal. Various grades and phosphate ore concentrations were chosen for this rheological investigation. We created some experimental protocols to determine the main characteristics of these complex fluids and established relevant rheological models with a view to simulate the numerical flow in a cylindrical pipeline. Rheograms of these slurries were obtained using a rotational rheometer and were accurately modeled with commonly used yield-pseudoplastic models. The results show that the concentration of solids in a solid–liquid mixture could be increased while maintaining a desired apparent viscosity. Finally, the design equations for the laminar pipe flow of yield pseudoplastics were investigated to highlight the role of rheological studies in this context.

Mechanical properties of PVDF-coated fabric under tensile tests

2015 ◽  
Vol 35 (4) ◽  
pp. 377-390 ◽  
Author(s):  
Andrzej Ambroziak
Keyword(s):  
Mechanical Properties ◽  
Polyvinylidene Fluoride ◽  
Cyclic Load ◽  
Tensile Tests ◽  
Woven Fabrics ◽  
Uniaxial Tensile ◽  
Cyclic Tests ◽  
Comprehensive Investigation ◽  
Coated Fabric ◽  
Coated Fabrics

Abstract This article describes the laboratory tests necessary to identify the mechanical properties of the polyvinylidene fluoride (PVDF)-coated fabrics named Precontraint 1202S and Precontraint 1302S. First, a short survey of the literature concerning the description of coated woven fabrics is presented. Second, the material parameters for PVDF-coated fabrics are specified on the basis of biaxial tensile tests. A comparison of the 1:1 biaxial and the uniaxial tensile tests results is also given. Additionally, biaxial cyclic tests were performed to observe the change of immediate mechanical properties under cyclic load. The article is aimed as an introduction to a comprehensive investigation of the mechanical properties of coated fabrics.

Enhancing the Thermal and Mechanical Characteristics of Polyvinyl Alcohol (PVA)-Hemp Protein Particles (HPP) Composites

2021 ◽  
Vol 36 (2) ◽  
pp. 137-143
Author(s):  
S. A. Awad
Keyword(s):  
Mechanical Properties ◽  
Elevated Temperatures ◽  
Composite Films ◽  
Tensile Tests ◽  
Mechanical Analysis ◽  
Decomposition Temperature ◽  
Scanning Calorimetry ◽  
Solution Casting Method ◽  
Protein Particles

Abstract This paper aims to describe the thermal, mechanical, and surface properties of a PVA/HPP blend whereby the film was prepared using a solution casting method. The improvements in thermal and mechanical properties of HPP-based PVA composites were investigated. The characterization of pure PVA and PVA composite films included tensile tests, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The results of TGA and DSC indicated that the addition of HPP increased the thermal decomposition temperature of the composites. Mechanical properties are significantly improved in PVA/HPP composites. The thermal stability of the PVA composite increased with the increase of HPP filler content. The tensile strength increased from 15.74 ± 0.72 MPa to 27.54 ± 0.45 MPa and the Young’s modulus increased from 282.51 ± 20.56 MPa to 988.69 ± 42.64 MPa for the 12 wt% HPP doped sample. Dynamic mechanical analysis (DMA) revealed that at elevated temperatures, enhanced mechanical properties because of the presence of HPP was even more noticeable. Morphological observations displayed no signs of agglomeration of HPP fillers even in composites with high HPP loading.

scholarly journals Microstructural and Mechanical Characterization of Al-0.80Mg-0.85Si-0.3Zr Alloy

2017 ◽  
Vol 17 (4) ◽  
pp. 73-78 ◽  
Author(s):  
F. Kahrıman ◽  
M. Zeren
Keyword(s):  
Mechanical Properties ◽  
Automotive Industry ◽  
Room Temperature ◽  
Tensile Tests ◽  
Direct Chill ◽  
Peak Hardness ◽  
Casting Method ◽  
Industry Standard ◽  
Three Stages

Abstract In this study, Al-0.80Mg-0.85Si alloy was modified with the addition of 0.3 wt.-% zirconium and the variation of microstructural features and mechanical properties were investigated. In order to produce the billets, vertical direct chill casting method was used and billets were homogenized at 580 °C for 6 h. Homogenized billets were subjected to aging practice following three stages: (i) solution annealing at 550 °C for 3 h, (ii) quenching in water, (iii) aging at 180 °C between 0 and 20 h. The hardness measurements were performed for the alloys following the aging process. It was observed that peak hardness value of Al-0.80Mg-0.85Si alloy increased with the addition of zirconium. This finding was very useful to obtain aging parameters for the extruded hollow profiles which are commonly used in automotive industry. Standard tensile tests were applied to aged profiles at room temperature and the results showed that modified alloy had higher mechanical properties compared to the non-modified alloy.

scholarly journals Manufacture and Mechanical Behavior of Green Polymeric Composite Reinforced with Hydrated Cotton Fiber

2019 ◽  
Vol 2 (1) ◽  
Author(s):  
Ênio Henrique Pires da Silva ◽  
Emiliano Barretto Almendro ◽  
Amanda Albertin Xavier da Silva ◽  
Guilherme Waldow ◽  
Flaminio CP Sales ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Cotton Fiber ◽  
Natural Fibers ◽  
Young Modulus ◽  
Polymeric Composite ◽  
Morphological Characterization ◽  
Comparison And Study ◽  
Fiber Fabric

Composites using natural fibers as reinforcement and biodegradable polymers as matrix are considered environmentally friendly materials. This paper seeks the mechanical and morphological characterization of a biocomposite of polyurethane (PU) derived from a blend of vegetable oils doped with aluminatrihydrate (ATH) and reinforced with hydrated cotton fiber fabric (HCF). The comparison and study were performed based on the properties of the: (i) pure PU; (ii) PU doped with ATH containing 30% of the final mass (PU+30%ATH); (iii) composite of PU reinforced with 7 layers of cotton fiber fabric (PU+7CF); (iv) composite of PU+30%ATH reinforced with 7 layers of CF (PU+30%ATH+7CF); (v) composite of PU+30%ATH reinforced with 7 layers of hydrated cotton fiber fabric (PU+30%ATH+7HCF). The mechanical properties obtained according to the tensile test for the composite PU+30%ATH+CF with fibers oriented at 0° showed a significant increment in tensile strength (60 MPa) and the modulus of elasticity (4.7 GPa) when compared to pure PU (40 MPa) and (1.7 GPa) respectively. PU+30%ATH also presented a rising tensile strength (31 MPa) and Young modulus (2.6 GPa). For the composite with addition of water, results presented a significant decrease in strength (31.3 MPa) and stiffness (0.9 GPa) than the composite with no water. Electron microscopy (SEM) analyses exhibited that the samples with addition of water showed the presence of large amounts of pores and the lower interaction between matrix and fiber. These results may explain the lower mechanical properties of this material. DOI: http://dx.doi.org/10.30609/JETI.2019-7576

scholarly journals On the role of higher alcohols in the characterization of cachaça

2020 ◽  
Vol 9 (10) ◽  
pp. e8299109135
Author(s):  
Amazile Biagioni Maia ◽  
Lorena Simão Marinho ◽  
David Lee Nelson
Keyword(s):  
Isoamyl Alcohol ◽  
Raw Material ◽  
Alcoholic Beverages ◽  
Higher Alcohols ◽  
Isobutyl Alcohol ◽  
Higher Alcohol ◽  
Three Samples ◽  
Typical Range

There is a growing interest in chemical markers for the identification and certification of cachaça as a cane spirit produced in Brazil. It is known that the higher alcohols that are usually analyzed (propyl alcohol, Isobutyl alcohol and isoamyl alcohol) occur in all alcoholic beverages (fermented and distilled), but the relative proportions can vary markedly according to the peculiarities of the raw material and the production process. In this work, the contents of higher alcohols in 300 samples of alembic cachaça were compared, 220 from the state of Minas Gerais and 80 from other states, as well as three samples of industrial cachaça and 14 samples of whiskeys of various brands. The typical range of total higher alcohols in cachaça was 180-360 mg/100 mL ethanol. Cachaça containing higher alcohol concentrations greater than 360 mg/100 mL ethanol do not comply with Brazilian legislation. However, cachaças with higher alcohols concentrations below 180 mg/100 mL ethanol, as was found in one of the industrial cachaças, signify adulteration, for example, by mixing with fuel alcohol. The C4/C5 ratio varied less than the C3/C5 ratio, being consistently within the range of 0.20-0.50. In the whiskeys analyzed, the concentrations of higher alcohols were in the range of 160 and 270 mg/100 mL. Therefore, this parameter would not assist in differentiating between cachaça and whiskey. But the C4/C5 ratio was consistently different, being always greater than 0.50 for the whiskeys. Thus, the routine analysis of higher alcohols provides useful information both for tracking possible fraud and for assessments related to the identity or origin of cachaça.

scholarly journals Influence of Furfuryl Alcohol Fiber Pre-Treatment on the Moisture Absorption and Mechanical Properties of Flax Fiber Composites

Fibers ◽  
2018 ◽  
Vol 6 (3) ◽  
pp. 59 ◽  
Author(s):  
Yunlong Jia ◽  
Bodo Fiedler
Keyword(s):  
Mechanical Properties ◽  
Furfuryl Alcohol ◽  
Moisture Absorption ◽  
Natural Fiber ◽  
Tensile Tests ◽  
Fiber Composites ◽  
Flax Fiber ◽  
Moisture Resistance ◽  
Structural Applications ◽  
Pre Treatment

Poor moisture resistance of natural fiber reinforced bio-composites is a major concern in structural applications. Many efforts have been devoted to alleviate degradation of bio-composites caused by moisture absorption. Among them, fiber pre-treatment has been proven to be effective. This paper proposes an alternative “green” fiber pretreatment with furfuryl alcohol. Pre-treatments with different parameters were performed and the influence on the mechanical properties of fiber bundles and composites was investigated. Moisture resistance of composites was evaluated by water absorption tests. Mechanical properties of composites with different water contents were analyzed in tensile tests. The results show that furfuryl alcohol pretreatment is a promising method to improve moisture resistance and mechanical properties (e.g., Young’s modulus increases up to 18%) of flax fiber composites.

Sign in / Sign up

Export Citation Format

Share Document