scholarly journals The First Occurrence of Asbestiform Magnesio-Riebeckite in Schists in the Frido Unit (Pollino Unesco Global Geopark, Southern Italy)

Fibers ◽  
2019 ◽  
Vol 7 (9) ◽  
pp. 79 ◽  
Author(s):  
Salvatore Laurita ◽  
Giovanna Rizzo
Keyword(s):  
Southern Italy ◽  
Analytical Techniques ◽  
X Ray ◽  
Toxicological Studies ◽  
Xrf Scanning ◽  
First Occurrence ◽  
Micro Analysis ◽  
First Time ◽  
Index Mineral

In this paper, new mineralogical and petrographical data of asbestiform Magnesio-riebeckite from ophiolite cropping out in the Pollino Unesco Global Geopark (southern Italy) are presented. Magnesio-riebeckite schists with HP-LT index mineral assemblage recorded metamorphic events in blueschist facies in the Frido Unit. Previous toxicological studies showed that asbestiform Magnesio-riebeckite species exhibited high carcinogenicity in previous intraperitoneal injection experiments with rats. The results have been obtained using different analytical techniques such as X-ray fluorescence (XRF), scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS), and electron probe micro analysis (EPMA). Results show that all the samples contain fibrous Magnesio-riebeckite and/or prismatic, acicular crystals in aggregates. The concentration of elements in Magnesio-riebeckite crystals is: Na2O (4.12–6.26 wt%), MgO (8.22–10.87 wt%), FeO (19.07–23.81 wt%), SiO2 (52.05–56.06 wt%), CaO (1.12–4.53 wt%), Al2O3 (1.34–1.93 wt%), and MnO (0.10–0.34 wt%). Magnesio-riebeckite crystals are documented in the Pollino Unesco Global Geopark for the first time. For this reason, the aim of this paper is the characterization of Magnesio-riebeckite to improve the knowledge of this mineral in the studied area, because the release of fibers into the environment is dangerous for human health.

The Use of Advanced Analytical Techniques for Characterization of the Chemical, Physical, and Crystallographic Nature of a Surface

1973 ◽  
Vol 31 ◽  
pp. 132-133 ◽  
Author(s):  
R. E. Herfert
Keyword(s):  
Surface Characterization ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Depth Of Penetration ◽  
X Ray ◽  
The Past ◽  
Transmission Electron ◽  
Scanning Electron

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.

Synthesis and characterization of meso-to-meso directly linked porphyrin-diazaporphyrin triads

2018 ◽  
Vol 22 (09n10) ◽  
pp. 814-820
Author(s):  
Yingying Jia ◽  
Ling Xu ◽  
Bangshao Yin ◽  
Mingbo Zhou ◽  
Jianxin Song
Keyword(s):  
Nickel Complex ◽  
High Resolution Mass Spectrometry ◽  
Dihedral Angles ◽  
X Ray Diffraction ◽  
Extinction Coefficients ◽  
X Ray ◽  
H Nmr ◽  
First Time ◽  
Molar Extinction Coefficients

Beginning with 5,10,15-triarylporphyrin-nickel complex, five meso-to-meso directly linked porphyrin-diazaporphyrin triads were successfully prepared for the first time through a series of reactions including formylation via Vilsmeier–Haack reaction, condensation with pyrrole, bromination with [Formula: see text]-Bromosuccinimide (NBS), oxidation with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ), metal-templated cyclization of dibromodipyrrin-metal complexes with NaN[Formula: see text] and demetalization. All these triads were comprehensively characterized by [Formula: see text]H NMR, high-resolution mass spectrometry and UV-vis absorption. In addition, the structure of compound 6Ni was unambiguously determined by X-ray diffraction analysis, which showed that the two dihedral angles are both 86.65 (4)[Formula: see text] between each mean plane of porphyrin and that of central diazaporphyrin The UV-vis absorption spectra disclosed that the longest wavelengths of Soret bands and Q bands for these triads were observed at 429 and 642 nm, respectively. In contrast to diazaporphyrin-porphyrin dyads, diazaporphyrin dimers and diazaporphyrin monomers reported previously the molar extinction coefficients, particularly for triad 8Ni are much higher.

scholarly journals Assay and physicochemical characterization of the antiparasitic albendazole

2012 ◽  
Vol 48 (2) ◽  
pp. 281-290 ◽  
Author(s):  
Noely Camila Tavares Cavalcanti ◽  
Giovana Damasceno Sousa ◽  
Maria Alice Maciel Tabosa ◽  
José Lamartine Soares Sobrinho ◽  
Leila Bastos Leal ◽  
...  
Keyword(s):  
Physicochemical Characterization ◽  
Analytical Techniques ◽  
Assay Method ◽  
Active Pharmaceutical Ingredients ◽  
X Ray Diffraction ◽  
Melting Points ◽  
X Ray ◽  
Pharmaceutical Ingredients ◽  
Complementary Techniques

The aim of this study was to characterize three batches of albendazole by pharmacopeial and complementary analytical techniques in order to establish more detailed specifications for the development of pharmaceutical forms. The ABZ01, ABZ02, and ABZ03 batches had melting points of 208 ºC, 208 ºC, and 209 ºC, respectively. X-ray diffraction revealed that all three batches showed crystalline behavior and the absence of polymorphism. Scanning electron microscopy showed that all the samples were crystals of different sizes with a strong tendency to aggregate. The samples were insoluble in water (5.07, 4.27, and 4.52 mg mL-1, respectively) and very slightly soluble in 0.1 M HCl (55.10, 56.90, and 61.70 mg mL-1, respectively) and additionally showed purities within the range specified by the Brazilian Pharmacopoeia 5th edition (F. Bras. V; 98% to 102%). The pharmacopeial assay method was not reproducible and some changes were necessary. The method was validated and showed to be selective, specific, linear, robust, precise, and accurate. From this characterization, we concluded that pharmacopeial techniques alone are not able to detect subtle differences in active pharmaceutical ingredients; therefore, the use of other complementary techniques is required to ensure strict quality control in the pharmaceutical industry.

Analysis of CoCrMo Surface Oxide Removal by Alumina Blasting before Porcelain Firing in Dental Restorations

2012 ◽  
Vol 730-732 ◽  
pp. 9-14 ◽  
Author(s):  
Bruno Henriques ◽  
Filipe Silva ◽  
Delfim Soares
Keyword(s):  
Heat Treatment ◽  
Surface Roughness ◽  
Chemical Composition ◽  
High Alumina ◽  
X Ray ◽  
Dental Restorations ◽  
Ceramic Bond ◽  
Xrf Scanning ◽  
Oxide Removal

The purpose of this work was to perform a chemical and mechanical characterization of a preoxidized CoCrMo alumina blasted surface. This is a commonly performed surface treatment used in metal-porcelain systems for dental restorations to remove oxides formed during preoxidation heat treatment from the metal’s surface. CoCrMo dental alloy’s specimens produced by lost wax process were examined in terms of chemical composition using X-Ray fluorescence spectroscopy (XRF), Scanning Electron Microscopy (SEM) and Energy Dispersive X-Ray Spectroscopy (EDS); in terms of mechanical characteristics through the means of a microhardness test and in terms of surface roughness using a profilometer. It was investigated the chemical composition of various surface conditions: non-preoxidized, preoxidized, ground oxidized surface and sandblasted oxidized surface. After alumina blasting, the oxides level on metal’s surface remained high. Alumina blasting treatment (Ø110 µm) produced an 84% increase of CoCrMo surface hardening and an increase in surface roughness (Ra=0.58 µm). It was found alumina contaminants on the metal’s surface. Therefore, it was concluded that alumina blasting do not entirely removes the oxide layer formed during preoxidation heat treatment. It produced a chemical and mechanical surface modification that can influence the metal-ceramic bond strength.

scholarly journals Synthesis of Metarhizium anisopliae–Chitosan Nanoparticles and Their Pathogenicity against Plutella xylostella (Linnaeus)

2021 ◽  
Vol 10 (1) ◽  
pp. 1
Author(s):  
Jianhui Wu ◽  
Cailian Du ◽  
Jieming Zhang ◽  
Bo Yang ◽  
Andrew G. S. Cuthbertson ◽  
...  
Keyword(s):  
Plutella Xylostella ◽  
Metarhizium Anisopliae ◽  
Chitosan Nanoparticles ◽  
Analytical Techniques ◽  
X Ray ◽  
Synthesis Of Nanoparticles ◽  
Force Microscopy ◽  
Atomic Force ◽  
Afm Analysis

Nanotechnology is increasingly being used in areas of pesticide production and pest management. This study reports the isolation and virulence of a new Metarhizium anisopliae isolate SM036, along with the synthesis and characterization of M. anisopliae–chitosan nanoparticles followed by studies on the efficacy of nanoparticles against Plutella xylostella. The newly identified strain proved pathogenic to P. xylostella under laboratory conditions. The characterization of M. anisopliae–chitosan nanoparticles through different analytical techniques showed the successful synthesis of nanoparticles. SEM and HRTEM images confirmed the synthesis of spherical-shaped nanoparticles; X-ray diffractogram showed strong peaks between 2θ values of 16–30°; and atomic force microscopy (AFM) analysis revealed a particle size of 75.83 nm for M. anisopliae–chitosan nanoparticles, respectively. The bioassay studies demonstrated that different concentrations of M. anisopliae–chitosan nanoparticles were highly effective against second instar P. xylostella under laboratory and semi-field conditions. These findings suggest that M. anisopliae–chitosan nanoparticles can potentially be used in biorational P. xylostella management programs.

scholarly journals Synthesis and characterization of apatite silicated powders with wet precipitation method

2021 ◽  
Vol 234 ◽  
pp. 00106
Author(s):  
Houda Labjar ◽  
Hassan Chaair
Keyword(s):  
Electron Microscopy ◽  
Heat Treatment ◽  
Analytical Techniques ◽  
Precipitation Method ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Wet Precipitation ◽  
Scanning Electron

The synthesis of apatite silicated Ca10(PO4)6-x(SiO4)x(OH)2-x (SiHA) with 0≤x≤2 was investigated using a wet precipitation method followed by heat treatment using calcium carbonate CaCO3 and phosphoric acid H3PO4 and silicon tetraacetate SiC8H20O4 (TEOS) in medium of water ethanol, with three different silicate concentrations. After drying, the samples are ground and then characterized by different analytical techniques like X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR) and Scanning electron Microscopy (SEM) and chemical analysis.

Characterization of Cold Sprayed Copper Coatings on Al Alloy Substrate

2015 ◽  
Vol 3 (2) ◽  
pp. 41-53
Author(s):  
Tarun Goyal ◽  
T. S. Sidhu ◽  
R. S. Walia
Keyword(s):  
Spray Deposition ◽  
Structural Characteristics ◽  
Al Alloy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Copper Coatings ◽  
Powder Particles ◽  
Micro Analysis ◽  
Hardness Values

This study reveals the successful low pressure cold spray deposition of near-uniform, defect free and dense copper coatings approximately 700-1900 µm thick, on Al alloy for electro-technical applications. The micro structural characteristics of the deposits have been studied using the combined techniques of X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS) and electron-probe micro analysis (EPMA). The coatings exhibited characteristic splat-like, layered morphologies due to the deposition of solid powder particles which appeared to have been plastically deformed on impact to the substrate. The developed coatings have a dense (in the range of 3090-5015 kg/m3)and nearly uniform microstructure, with almost uniform hardness values in the range of 120 -140 Hv, and electrical conductivity in the range of 23-30 MS/m. EDAX, XRD and EPMA results revealed that the main constituent in the coating is Cu.

scholarly journals NuSTAR reveals that the heavily obscured nucleus of NGC 2785 was the contaminant of IRAS 09104+4109 in the BeppoSAX/PDS hard X-rays

2018 ◽  
Vol 619 ◽  
pp. A16
Author(s):  
C. Vignali ◽  
P. Severgnini ◽  
E. Piconcelli ◽  
G. Lanzuisi ◽  
R. Gilli ◽  
...  
Keyword(s):  
X Rays ◽  
X Ray ◽  
Star Forming ◽  
Physical Description ◽  
Enhanced Sensitivity ◽  
X Ray Imaging ◽  
First Time ◽  
In Virtue Of

Context. The search for heavily obscured active galactic nuclei has been revitalized in the last five years by NuSTAR, which has provided a good census and spectral characterization of a population of such objects, mostly at low redshift, thanks to its enhanced sensitivity above 10 keV compared to previous X-ray facilities, and its hard X-ray imaging capabilities. Aims. We aim at demonstrating how NGC 2785, a local (z = 0.009) star-forming galaxy, is responsible, in virtue of its heavily obscured active nucleus, for significant contamination in the non-imaging BeppoSAX/PDS data of the relatively nearby (≈17′) quasar IRAS 09104+4109 (z = 0.44), which was originally mis-classified as Compton thick. Methods. We analyzed ≈71 ks NuSTAR data of NGC 2785 using the MYTorus model and provided a physical description of the X-ray properties of the source for the first time. Results. We found that NGC 2785 hosts a heavily obscured (NH ≈ 3 × 1024 cm−2) nucleus. The intrinsic X-ray luminosity of the source, once corrected for the measured obscuration (L2−10keV ≈ 1042 erg s−1), is consistent within a factor of a few with predictions based on the source mid-infrared flux using widely adopted correlations from the literature. Conclusions. Based on NuSTAR data and previous indications from the Neil Gehrels Swift Observatory (BAT instrument), we confirm that NGC 2785, because of its hard X-ray emission and spectral shape, was responsible for at least one third of the 20–100 keV emission observed using the PDS instrument onboard BeppoSAX, originally completely associated with IRAS 09104+4109. Such emission led to the erroneous classification of this source as a Compton-thick quasar, while it is now recognized as Compton thin.

Spectroscopic Characterization of Wilkinson's Catalyst Using X-ray Photoelectron Spectroscopy (ESCA)

1982 ◽  
Vol 36 (3) ◽  
pp. 290-296 ◽  
Author(s):  
Manuel Carvalho ◽  
Larry F. Wieserman ◽  
David M. Hercules
Keyword(s):  
Binding Energy ◽  
Photoelectron Spectroscopy ◽  
Analytical Techniques ◽  
Spectroscopic Characterization ◽  
Homogeneous Hydrogenation ◽  
X Ray ◽  
Wilkinson’S Catalyst ◽  
Ft Ir ◽  
Wilkinson's Catalyst

Wilkinson's catalyst, RhCl(PPh3)3 is a well known and widely used homogeneous hydrogenation catalyst. This catalyst was analyzed by ESCA which revealed that two rhodium species [Rh(I) and Rh(III)] were present, both for commercial preparations and for catalysts prepared in this laboratory. The ratio of Rh(I) to Rh(III) was 3:2 regardless of the source. A different method of synthesizing RhCl(PPh3)3 was used and produced a compound having only Rh(I) species. Additional analytical techniques such as elemental analysis, FT-IR, liquid chromatography, and 31P NMR were used to determine the origin of the higher binding energy peaks when Wilkinson's procedure was used to prepare RhCl(PPh3)3. Hydrogenation of cyclohexene was also performed to determine the effect of the higher binding energy species on catalytic activity.

Deposition and Characterization of Y3Al5O12 (YAG) Films and Powders by Plasma Spray Synthesis

2000 ◽  
Vol 658 ◽  
Author(s):  
Sujatha D. Parukuttyammaa ◽  
Joshua Margolis ◽  
Haiming Liu ◽  
John B. Parise ◽  
Clare P. Grey ◽  
...  
Keyword(s):  
Complex Oxide ◽  
Oxide Coatings ◽  
Material Synthesis ◽  
X Ray ◽  
Plasma Technique ◽  
Sprayed Coating ◽  
Rf Induction Plasma ◽  
First Time ◽  
Opening Up

ABSTRACTYAG powders and coatings were developed for the first time by a novel precursor plasma spraying technique using the radio frequency (RF) induction plasma technique. The XRD of the as -sprayed coating confirms the presence of YAG, H-YAP or O-YAP or a mixture of the above depending on the spray conditions. 27Al MAS NMR of the YAG coating corroborates the x-ray results. TEM studies on the coatings confirm that the coating consists of nano-structured particles. The successful spraying of these complex oxide coatings proves that chemistry of phase formation can be controlled in the plasma, thus opening up new avenues in material synthesis.

Sign in / Sign up

Export Citation Format

Share Document