scholarly journals Experimental Investigation of the Behavior of Self-Form Segmental Concrete Masonry Arches

Fibers ◽  
2019 ◽  
Vol 7 (7) ◽  
pp. 58 ◽  
Author(s):  
Ali A. Abdulhameed ◽  
AbdulMuttalib I. Said
Keyword(s):  
Construction Materials ◽  
Plain Concrete ◽  
The Self ◽  
Fiber Reinforced Polymer ◽  
Masonry Arches ◽  
Masonry Arch ◽  
Reinforced Polymer ◽  
Concrete Masonry ◽  
Load Carrying ◽  
A New Technique

This research aims to introduce a new technique—off-site and self-form segmental concrete masonry arches fabrication, without the need of construction formwork or centering. The innovative construction method in the current study encompasses two construction materials forms the self-form masonry arches, wedge-shape plain concrete voussoirs, and carbon fiber-reinforced polymer (CFRP) composites. The employment of CFRP fabrics was for two main reasons: bonding the voussoirs and forming the masonry arches. In addition, CFRP proved to be efficient for strengthening the extrados of the arch rings under service loadings. An experimental test was conducted on four sophisticated masonry arch specimens. The research parameters were the Keystone thickness and the strengthening of the self-form arch ring at the intrados. The major test finding was that the use of thicker Keystone alters the behavior of the self-form arch and considerably increases the load carrying capacity by 79%. Partial strengthening of the intrados with CFRP fabrics of typical arch ring Keystone resulted considerable increase in the debonding load of fabrication CFRP sheets by 81%, increase in the localized crushing load by 13% and considerably increase voussoir sliding load by 107%.

scholarly journals Experimental Investigation of the Behaviour of Self-Form Segmental Concrete Masonry Arches

2019 ◽  
Author(s):  
Ali Abdulhameed ◽  
AbdulMuttalib Said
Keyword(s):  
Construction Materials ◽  
Plain Concrete ◽  
The Self ◽  
Masonry Arches ◽  
Masonry Arch ◽  
Reinforced Polymers ◽  
Concrete Masonry ◽  
Load Carrying ◽  
Wedge Shape ◽  
A New Technique

This research aims to introduce a new technique, off-site and self-form segmental concrete masonry arches fabrication, without the need of construction formwork or centering. The innovative construction method in the current study encompasses two construction materials forms the self-form masonry arches, wedge-shape plain concrete voussoirs, and Carbon Fibers Reinforced Polymers (CFRP) composites. The employment of CFRP fabrics was for two main reasons; bond the voussoirs and forming the masonry arches. However, CFRP proved to be efficient for strengthening the extrados of the arch rings under service loadings. An experimental test conducted on four sophisticated masonry arch specimens. Research parameters were using thicker keystone as well as the partial strengthening of the self-form arch ring at the intrados. Major test finding was the use of thicker Keystone, alter the behavior of the self-form arch, considerably increased the load carrying capacity by 79%. Partial strengthening of the intrados with CFRP fabrics of typical arch ring Keystone resulted considerable increased the debonding load of fabrication CFRP sheets by 81%, increase the localized crushing load by 13%, and considerably increase voussoir sliding load by 107%.

scholarly journals Experimental Behavior of Masonry Arches with and Without Fiber Reinforced Polymer

2019 ◽  
Vol 8 (9S3) ◽  
pp. 779-787
Keyword(s):  
Glass Fiber ◽  
Monotonic Loading ◽  
Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Glass Fiber Reinforced Polymer ◽  
Masonry Arches ◽  
Masonry Arch ◽  
Reinforced Polymer ◽  
Experimental Behavior ◽  
Glass Fiber Reinforced

This paper deals with the experimental behavior of solid clay brick masonry parabolic arches. Among all the different structural systems, masonry arches are the most efficient. In this paper preliminary tests were carried out on cement, sand, bricks, mortar and their material properties like specific gravity for cement, sand, compression strength on bricks, mortar and water absorption test on bricks, were studied. In this report fabrication of masonry arch of same dimensions were carried out. A total of four specimens were casted out of which two specimens were casted without GFRP. and two other were wrapped with GFRP on extrados and intrados surface of the arch. Specimens are having the span of 1.3m, rise of 0.5 and width of 0.230m. After the casting and curing of the all specimens was carried out, two arches which are without glass fiber reinforced polymer are subjected to monotonic loading and then other two arches were wrapped with glass fiber reinforced polymer and then subjected to monotonic loading

Improving the impact resistance of concrete panels by glass fiber reinforced polymer sheets

2017 ◽  
Vol 8 (2) ◽  
pp. 304-320 ◽  
Author(s):  
Mohamed MA Abdel-Kader ◽  
Ahmed Fouda
Keyword(s):  
Glass Fiber ◽  
Plain Concrete ◽  
Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Glass Fiber Reinforced Polymer ◽  
Concrete Panels ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Polymer Sheets ◽  
The Impact

In this article, the response of 12 plain concrete specimens to an impact of hard projectiles was examined in an experimental study. The tests were planned with an aim to observe the influence of using glass fiber reinforced polymer sheets to strengthen plain concrete panels on the performance of concrete under this type of loading. The main findings show that strengthening plain concrete panels with glass fiber reinforced polymer sheets showed satisfactory performance under the impact load; the glass fiber reinforced polymer sheets can be used for strengthening or upgrading concrete structures to improve their resistance against impact. Also, the location of the glass fiber reinforced polymer sheet affects the front and rear face craters.

Experimental study on the axial compression performance of GFRP-reinforced concrete square columns

2018 ◽  
Vol 22 (7) ◽  
pp. 1554-1565 ◽  
Author(s):  
Jianwei Tu ◽  
Kui Gao ◽  
Lang He ◽  
Xinping Li
Keyword(s):  
Carrying Capacity ◽  
Ultimate Load ◽  
Fiber Reinforced Polymer ◽  
Load Carrying Capacity ◽  
Longitudinal Reinforcement ◽  
Rc Columns ◽  
Compression Performance ◽  
Reinforced Polymer ◽  
Load Carrying ◽  
Ultimate Load Carrying Capacity

At present, extensive studies have been conducted relative to the topic of fiber-reinforced polymer(FRP)- reinforced concrete (RC) flexural members, and many design methods have also been introduced. There have, however, been few studies conducted on the topic of FRP-RC compression members. In light of this, eight glass-fiber-reinforced polymer (GFRP)-RC square columns (200×200×600 mm) were tested in order to investigate their axial compression performance. These columns were reinforced with GFRP longitudinal reinforcement and confined GFRP stirrup. These experiments investigated the effects of the longitudinal reinforcement ratio, stirrup configuration (spirals versus hoops) and spacing on the load-carrying capacity and failure modes of GFRP-RC rectangular columns. The test results indicate that the load-carrying capacity of longitudinal GFRP bars accounted for 3%-7% of the ultimate load-carrying capacity of the columns. The ultimate load-carrying capacity of RC columns confined with GFRP spirals increased by 0.8%-1.6% with higher ductility, compared to GFRP hoops. Reducing the stirrup spacing may prevent the buckling failure of the longitudinal bars and increase the ductility and load-carrying capacity of the GFRP-RC columns. It has been found that setting the GFRP compressive strength to 35% of the GFRP maximum tensile strength yields a reasonable estimate of ultimate load-carrying capacity of GFRP-RC columns.

Structural Performance of Fiber-Reinforced Polymer Honeycomb Sandwich Panels: Evaluation of Size Effect and Wrap Strengthening

2003 ◽  
Vol 1845 (1) ◽  
pp. 191-199 ◽  
Author(s):  
Ondrej Kalny ◽  
Robert J. Peterman ◽  
Guillermo Ramirez ◽  
C. S. Cai ◽  
Dave Meggers
Keyword(s):  
Carrying Capacity ◽  
Ultimate Load ◽  
Sandwich Panels ◽  
Fiber Reinforced Polymer ◽  
Load Carrying Capacity ◽  
Flexural Capacity ◽  
Reinforced Polymer ◽  
Load Carrying ◽  
Honeycomb Sandwich ◽  
Ultimate Load Carrying Capacity

Stiffness and ultimate load-carrying capacities of glass fiber-reinforced polymer honeycomb sandwich panels used in bridge applications were evaluated. Eleven full-scale panels with cross-section depths ranging from 6 to 31.5 in. (152 to 800 mm) have been tested to date. The effect of width-to-depth ratio on unit stiffness was found to be insignificant for panels with a width-to-depth ratio between 1 and 5. The effect of this ratio on the ultimate flexural capacity is uncertain because of the erratic nature of core-face bond failures. A simple analytical formula for bending and shear stiffness, based on material properties and geometry of transformed sections, was found to predict service-load deflections within 15% accuracy. Although some factors influencing the ultimate load-carrying capacity were clearly identified in this study, a reliable analytical prediction of the ultimate flexural capacity was not attained. This is because failures occur in the bond material between the outer faces and core, and there are significant variations in bond properties at this point due to the wet lay-up process, even for theoretically identical specimens. The use of external wrap layers may be used to shift the ultimate point of failure from the bond (resin) material to the glass fibers. Wrap serves to strengthen the relatively weak core–face interface and is believed to bring more consistency in determining the ultimate load-carrying capacity.

Shear Failure Analysis of Concrete Beams Reinforced with Newly Developed GFRP Stirrups

2006 ◽  
Vol 324-325 ◽  
pp. 995-998
Author(s):  
Cheol Woo Park ◽  
Jong Sung Sim
Keyword(s):  
Failure Modes ◽  
Shear Failure ◽  
Concrete Beams ◽  
Fiber Reinforced Polymer ◽  
Experimental Program ◽  
Shear Stresses ◽  
Fiber Reinforced ◽  
Shear Span ◽  
Reinforced Polymer ◽  
A New Technique

Even though the application of fiber reinforced polymer (FRP) as a concrete reinforcement becomes more common with various advantages, one of the inherent shortcomings may include its brittleness and on-site fabrication and handling. Therefore, the shape of FRP products has been limited only to a straight bar or sheet type. This study suggests a new technique to use glass fiber reinforced polymer (GFRP) bars for the shear reinforcement in concrete beams, and investigates its applicability. The developed GFRP stirrup was used in the concrete instead of ordinary steel stirrups. The experimental program herein evaluates the effectiveness of the GFRP stirrups with respect to different shear reinforcing ratios under three different shear span-to-depth testing schemes. At the same shear reinforcing ratio, the ultimate loads of the beams were similar regardless the shear reinforcing materials. Once a major crack occurs in concrete, however, the failure modes seemed to be relatively brittle with GFRP stirrups. From the measured strains on the surface of concrete, the shear stresses sustained by the stirrups were calculated and the efficiency of the GFRP stirrups was shown to be 91% to 106% depending on the shear span-to-depth ratio.

scholarly journals Numerical Analysis of the Flexural Response of Rc Beams Strengthened with NSM-CFRP

2018 ◽  
Vol 28 (3) ◽  
pp. 90-102
Author(s):  
Ahmed Khene ◽  
Habib Abdelhak Mesbah ◽  
Nasr-Eddine Chikh
Keyword(s):  
Parametric Study ◽  
Reinforced Concrete Beams ◽  
Fiber Reinforced Polymer ◽  
Near Surface ◽  
Flexural Response ◽  
Reinforced Polymer ◽  
Near Surface Mounted ◽  
Concrete Coating ◽  
A New Technique ◽  
Nsm Technique

Abstract In this study, we have chosen to use a new technique of reinforcement with composite materials, namely the near surface mounted technique (NSM). The NSM technique consists in inserting strips of carbon fiber reinforced polymer (CFRP) laminate into slits made beforehand at the level of the concrete coating of the elements to be reinforced. A numerical investigation was conducted on rectangular reinforced concrete beams reinforced with NSM-CFRP using the ATENA finite element code. A parametric study was also carried out in this research. The numerical results were compared with the experimental results of the beams tested by other researchers with the same reinforcement configurations. Overall, numerical behavior laws are rather well-suited to those obtained experimentally and the parametric study has also yielded interesting results.

scholarly journals Flexural strengthening of Reinforced Concrete (RC) Beams Retrofitted with Corrugated Glass Fiber Reinforced Polymer (GFRP) Laminates

2015 ◽  
Vol 2 (1) ◽  
Author(s):  
N. Aravind ◽  
Amiya K. Samanta ◽  
Dilip Kr. Singha Roy ◽  
Joseph V. Thanikal
Keyword(s):  
Reinforced Concrete ◽  
Carrying Capacity ◽  
Fiber Reinforced Polymer ◽  
Load Carrying Capacity ◽  
Rc Beams ◽  
Glass Fiber Reinforced Polymer ◽  
Flexural Strengthening ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Load Carrying

AbstractStrengthening the structural members of old buildings using advanced materials is a contemporary research in the field of repairs and rehabilitation. Many researchers used plain Glass Fiber Reinforced Polymer (GFRP) sheets for strengthening Reinforced Concrete (RC) beams. In this research work, rectangular corrugated GFRP laminates were used for strengthening RC beams to achieve higher flexural strength and load carrying capacity. Type and dimensions of corrugated profile were selected based on preliminary study using ANSYS software. A total of twenty one beams were tested to study the load carrying capacity of control specimens and beams strengthened with plain sheets and corrugated laminates using epoxy resin. This paper presents the experimental and theoretical study on flexural strengthening of Reinforced Concrete (RC) beams using corrugated GFRP laminates and the results are compared. Mathematical models were developed based on the experimental data and then the models were validated.

scholarly journals Flexural Behavior of Basalt Fiber Reinforced Polymer Tube Confined Coconut Fiber Reinforced Concrete

2019 ◽  
Vol 2019 ◽  
pp. 1-7
Author(s):  
Yang Lv ◽  
Xueqian Wu ◽  
Mengran Gao ◽  
Jiaxin Chen ◽  
Yuhao Zhu ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Basalt Fiber ◽  
Plain Concrete ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced Polymer ◽  
Control Group ◽  
Fiber Reinforced ◽  
Coconut Fiber ◽  
Reinforced Polymer ◽  
Basalt Fiber Reinforced Polymer

Basalt fiber has arisen new perspectives due to the potential low cost and excellent mechanical performance, together with the use of environmental friendly coir can be beneficial to the development of sustainable construction. In this study, a new composite structure called basalt fiber reinforced polymer (BFRP) tube encased coconut fiber reinforced concrete (CFRC) is developed. The 28-day compression strength of the plain concrete is about 15 MPa, which represents the low-strength poor-quality concrete widely existing in many old buildings and developing countries. Three types of BFRP tubes, i.e., 2-layer, 4-layer, and 6-layer, with the inner diameter of 100 mm and a length of 520 mm, were prepared. The plain concrete (PC) and CFRC were poured and cured in these tubes to fabricated BFRP tube confined long cylindrical beams. Three PC cylindrical beams and 3 CFRC cylindrical beams were prepared to be the control group. The four-point bending tests of these specimens were carried out to investigate the enhancement due to the BFRP tube and coir reinforcement. The load-carrying capacity, force-displacement relationship, failure mode, and the cracking moment were analyzed. Results show that both BFRP tube confined plain concrete (PC) and BFRP tube confined CFRC have excellent flexural strength and ductility, and the inclusion of the coir can further enhance the ductility of the concrete.

Sign in / Sign up

Export Citation Format

Share Document