scholarly journals Adaptive Downward/Upward Routing Protocol for Mobile-Sensor Networks

2019 ◽  
Vol 11 (1) ◽  
pp. 18 ◽  
Author(s):  
Jinpeng Wang ◽  
Gérard Chalhoub ◽  
Michel Misson

Recently, mobility support has become an important requirement in various Wireless Sensor Networks (WSNs). Low-power and Lossy Networks (LLNs) are a special type of WSNs that tolerate a certain degree of packet loss. However, due to the strict resource constraints in the computation, energy, and memory of LLNs, most routing protocols only support static network topologies. Data collection and data dissemination are two basic traffic modes in LLNs. Unlike data collection, data dissemination is less investigated in LLNs. There are two sorts of data-dissemination methods: point-to-multipoint and point-to-point. In this paper, we focus on the point-to-point method, which requires the source node to build routes to reach the destination node. We propose an adaptive routing protocol that integrates together point-to-point traffic and data-collection traffic, and supports highly mobile scenarios. This protocol quickly reacts to the movement of nodes to make faster decisions for the next-hop selection in data collection and dynamically build routes for point-to-point traffic. Results obtained through simulation show that our work outperforms two generic ad hoc routing protocols AODV and flooding on different performance metrics. Results also show the efficiency of our work in highly mobile scenarios with multiple traffic patterns.

2015 ◽  
Vol 6 (1) ◽  
pp. 27-37
Author(s):  
Anish Soni ◽  
Rajneesh Randhawa

Energy efficiency of Wireless Sensor Networks has become an essential requirement and is the main issue for researchers. Various routing, data dissemination and energy efficient protocols have been designed for Wireless Sensor Networks where energy issue has been given more stress. Sensors in wireless sensor networks work on battery and have limited energy. Hence, network has limited lifetime. Routing protocol plays a major role in deciding for how much time a network will survive. All routing algorithms tend to increase the lifetime of WSN while maintaining factors like successful and real-time delivery of a message. This paper aims towards studying different categories of routing protocols and finally four hierarchical routing protocols LEACH, EHRP, SEP and FAIR have been simulated. The performance of each routing protocol has been measured on some performance metrics like network lifetime, packets transferred to BS, number of dead nodes etc and finally concluded that how a routing protocol can impact the network lifetime.


In this research paper compare the protocol’s performance together with the experimental results of optimal routing using real-life scenarios of vehicles and pedestrians roaming in a city. In this research paper, conduct several simulation comparison experiments(in the NS2 Software) to show the impact of changing buffer capacity, packet lifetime, packet generation rate, and number of nodes on the performance metrics. This research paper is concluded by providing guidelines to develop an efficient DTN routing protocol. To the best of researcher(Parameswari et al.,) knowledge, this work is the first to provide a detailed performance comparison among the diverse collection of DTN routing protocols.


2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Mohammed S. Al-kahtani ◽  
Lutful Karim ◽  
Nargis Khan

Designing an efficient routing protocol that opportunistically forwards data to the destination node through nearby sensor nodes or devices is significantly important for an effective incidence response and disaster recovery framework. Existing sensor routing protocols are mostly not effective in such disaster recovery applications as the networks are affected (destroyed or overused) in disasters such as earthquake, flood, Tsunami and wildfire. These protocols require a large number of message transmissions to reestablish the clusters and communications that is not energy efficient and result in packet loss. This paper introduces ODCR - an energy efficient and reliable opportunistic density clustered-based routing protocol for such emergency sensor applications. We perform simulation to measure the performance of ODCR protocol in terms of network energy consumptions, throughput and packet loss ratio. Simulation results demonstrate that the ODCR protocol is much better than the existing TEEN, LEACH and LORA protocols in term of these performance metrics.


Author(s):  
A. Radhika ◽  
D. Haritha

Wireless Sensor Networks, have witnessed significant amount of improvement in research across various areas like Routing, Security, Localization, Deployment and above all Energy Efficiency. Congestion is a problem of  importance in resource constrained Wireless Sensor Networks, especially for large networks, where the traffic loads exceed the available capacity of the resources . Sensor nodes are prone to failure and the misbehaviour of these faulty nodes creates further congestion. The resulting effect is a degradation in network performance, additional computation and increased energy consumption, which in turn decreases network lifetime. Hence, the data packet routing algorithm should consider congestion as one of the parameters, in addition to the role of the faulty nodes and not merely energy efficient protocols .Nowadays, the main central point of attraction is the concept of Swarm Intelligence based techniques integration in WSN.  Swarm Intelligence based Computational Swarm Intelligence Techniques have improvised WSN in terms of efficiency, Performance, robustness and scalability. The main objective of this research paper is to propose congestion aware , energy efficient, routing approach that utilizes Ant Colony Optimization, in which faulty nodes are isolated by means of the concept of trust further we compare the performance of various existing routing protocols like AODV, DSDV and DSR routing protocols, ACO Based Routing Protocol  with Trust Based Congestion aware ACO Based Routing in terms of End to End Delay, Packet Delivery Rate, Routing Overhead, Throughput and Energy Efficiency. Simulation based results and data analysis shows that overall TBC-ACO is 150% more efficient in terms of overall performance as compared to other existing routing protocols for Wireless Sensor Networks.


Author(s):  
Neetika Jain ◽  
Sangeeta Mittal

Background: Real Time Wireless Sensor Networks (RT-WSN) have hard real time packet delivery requirements. Due to resource constraints of sensors, these networks need to trade-off energy and latency. Objective: In this paper, a routing protocol for RT-WSN named “SPREAD” has been proposed. The underlying idea is to reserve laxity by assuming tighter packet deadline than actual. This reserved laxity is used when no deadline-meeting next hop is available. Objective: As a result, if due to repeated transmissions, energy of nodes on shortest path is drained out, then time is still left to route the packet dynamically through other path without missing the deadline. Results: Congestion scenarios have been addressed by dynamically assessing 1-hop delays and avoiding traffic on congested paths. Conclusion: Through extensive simulations in Network Simulator NS2, it has been observed that SPREAD algorithm not only significantly reduces miss ratio as compared to other similar protocols but also keeps energy consumption under control. It also shows more resilience towards high data rate and tight deadlines than existing popular protocols.


Sensors ◽  
2019 ◽  
Vol 19 (1) ◽  
pp. 196 ◽  
Author(s):  
Xing Hu ◽  
Linhua Ma ◽  
Yongqiang Ding ◽  
Jin Xu ◽  
Yan Li ◽  
...  

The geographic routing protocol only requires the location information of local nodes for routing decisions, and is considered very efficient in multi-hop wireless sensor networks. However, in dynamic wireless sensor networks, it increases the routing overhead while obtaining the location information of destination nodes by using a location server algorithm. In addition, the routing void problem and location inaccuracy problem also occur in geographic routing. To solve these problems, a novel fuzzy logic-based geographic routing protocol (FLGR) is proposed. The selection criteria and parameters for the assessment of the next forwarding node are also proposed. In FLGR protocol, the next forward node can be selected based on the fuzzy location region of the destination node. Finally, the feasibility of the FLGR forwarding mode is verified and the performance of FLGR protocol is analyzed via simulation. Simulation results show that the proposed FLGR forwarding mode can effectively avoid the routing void problem. Compared with existing protocols, the FLGR protocol has lower routing overhead, and a higher packet delivery rate in a sparse network.


Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1179
Author(s):  
Carolina Del-Valle-Soto ◽  
Carlos Mex-Perera ◽  
Juan Arturo Nolazco-Flores ◽  
Alma Rodríguez ◽  
Julio C. Rosas-Caro ◽  
...  

Wireless Sensor Networks constitute an important part of the Internet of Things, and in a similar way to other wireless technologies, seek competitiveness concerning savings in energy consumption and information availability. These devices (sensors) are typically battery operated and distributed throughout a scenario of particular interest. However, they are prone to interference attacks which we know as jamming. The detection of anomalous behavior in the network is a subject of study where the routing protocol and the nodes increase power consumption, which is detrimental to the network’s performance. In this work, a simple jamming detection algorithm is proposed based on an exhaustive study of performance metrics related to the routing protocol and a significant impact on node energy. With this approach, the proposed algorithm detects areas of affected nodes with minimal energy expenditure. Detection is evaluated for four known cluster-based protocols: PEGASIS, TEEN, LEACH, and HPAR. The experiments analyze the protocols’ performance through the metrics chosen for a jamming detection algorithm. Finally, we conducted real experimentation with the best performing wireless protocols currently used, such as Zigbee and LoRa.


2018 ◽  
Vol 7 (2.26) ◽  
pp. 25
Author(s):  
E Ramya ◽  
R Gobinath

Data mining plays an important role in analysis of data in modern sensor networks. A sensor network is greatly constrained by the various challenges facing a modern Wireless Sensor Network. This survey paper focuses on basic idea about the algorithms and measurements taken by the Researchers in the area of Wireless Sensor Network with Health Care. This survey also catego-ries various constraints in Wireless Body Area Sensor Networks data and finds the best suitable techniques for analysing the Sensor Data. Due to resource constraints and dynamic topology, the quality of service is facing a challenging issue in Wireless Sensor Networks. In this paper, we review the quality of service parameters with respect to protocols, algorithms and Simulations. 


2021 ◽  
Vol 14 (1) ◽  
pp. 400-409
Author(s):  
Mohamed Borham ◽  
◽  
Ghada Khoriba ◽  
Mostafa-Sami Mostafa ◽  
◽  
...  

Due to the energy limitation in Wireless Sensor Networks (WSNs), most researches related to data collection in WSNs focus on how to collect the maximum amount of data from the network with minimizing the energy consumption as much as possible. Many types of research that are related to data collection are proposed to overcome this issue by using mobility with path constrained as Maximum Amount Shortest Path routing Protocol (MASP) and zone-based algorithms. Recently, Zone-based Energy-Aware Data Collection Protocol (ZEAL) and Enhanced ZEAL have been presented to reduce energy consumption and provide an acceptable data delivery rate. However, the time spent on data collection operations should be taken into account, especially concerning real-time systems, as time is the most critical factor for these systems' performance. In this paper, a routing protocol is proposed to improve the time needed for the data collection process considering less energy consumption. The presented protocol uses a novel path with a communication time-slot assignment algorithm to reduce the count of cycles that are needed for the data collection process with reduction of 50% of the number of cycles needed for other protocols. Therefore, the time and energy needed for data collection are reduced by approximately 25%and 6% respectively, which prolongs the network lifetime. The proposed protocol is called Energy-Time Aware Data Collection Protocol (ETCL).


IEEE Access ◽  
2016 ◽  
Vol 4 ◽  
pp. 8476-8486 ◽  
Author(s):  
Guisong Yang ◽  
Huifen Xu ◽  
Xingyu He ◽  
Liping Gao ◽  
Yishuang Geng ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document