scholarly journals Maximizing the Standing Skyline Log Load Using a Variable Length Tagline

Forests ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 927
Author(s):  
John Sessions ◽  
Kevin Lyons ◽  
Jeff Wimer
Keyword(s):  
Carrying Capacity ◽  
Load Capacity ◽  
Variable Length ◽  
Load Carrying Capacity ◽  
Load Carrying ◽  
Cable Logging

The standing skyline continues to be a common cable logging configuration. In payload analysis it is usually assumed that the tagline (line connecting the logs to the carriage) length is held constant while yarding a turn up the skyline corridor. We show this assumption severely limits the skyline load-carrying capacity for skylines operating with partial suspension. We suggest that smart carriage technology could markedly increase the log load capacity through the use of a variable length tagline, and thus logging productivity. A methodology for estimating the log load capacity for a standing skyline with variable tagline length is presented. We illustrate that increases of 30-40 percent in log load are possible with a variable length tagline.

Influence of geometric parameters on the bump foil bearing performance

2019 ◽  
Vol 234 (7) ◽  
pp. 1017-1026
Author(s):  
Sadanand Kulkarni ◽  
Soumendu Jana
Keyword(s):  
Carrying Capacity ◽  
High Speed ◽  
System Development ◽  
Load Capacity ◽  
Radial Clearance ◽  
Load Carrying Capacity ◽  
Foil Bearings ◽  
Foil Bearing ◽  
Load Carrying ◽  
Lift Off

High-speed rotating system development has drawn considerable attention of the researchers, in the recent past. Foil bearings are one of the major contenders for such applications, particularly for high speed and low load rotating systems. In foil bearings, process fluid or air is used as the working medium and no additional lubricant is required. It is known from the published literature that the load capacity of foil bearings depend on the operating speed, viscosity of the medium, clearance, and stiffness of the foil apart from the geometric dimensions of the bearing. In case of foil bearing with given dimensions, clearance governs the magnitude of pressure developed, whereas stiffness dictates the change in radial clearance under the generated pressure. This article deals with the effect of stiffness, clearance, and its interaction on the bump foil bearings load-carrying capacity. For this study, four sets of foil bearings of the same geometry with two levels of stiffness and clearance values are fabricated. Experiments are carried out following two factor-two level factorial design approach under constant load and in each case, the lift-off speed is measured. The experimental output is analyzed using statistical techniques to evaluate the influence of parameters under consideration. The results indicate that clearance has the maximum influence on the lift-off speed/ load-carrying capacity, followed by interaction effect and stiffness. A regression model is developed based on the experimental values and model is validated using error analysis technique.

Static characteristics of misaligned multiple axial groove water-lubricated bearing in the turbulent regime

2016 ◽  
Vol 231 (3) ◽  
pp. 385-398 ◽  
Author(s):  
Ravindra Mallya ◽  
Satish B Shenoy ◽  
Raghuvir Pai
Keyword(s):  
Reynolds Number ◽  
Friction Coefficient ◽  
Carrying Capacity ◽  
Journal Bearing ◽  
Load Capacity ◽  
Turbulent Regime ◽  
Load Carrying Capacity ◽  
Static Characteristics ◽  
Load Carrying ◽  
Turbulence Effects

The static characteristics of misaligned three-axial water-lubricated journal bearing in the turbulent regime are analyzed for groove angles 36° and 18°. Ng and Pan’s turbulence model is applied to study the turbulence effects in the journal bearing. The static parameters such as load-carrying capacity, friction coefficient, and side leakage are found for different degree of misalignment (DM). The change in flow regime of the lubricant from laminar to turbulent and the increase in misalignment, improved the load capacity of the bearing. For lightly loaded bearings, the friction coefficient of the bearing increased with the increase in Reynolds number.

Partially Textured Slider and Journal Bearing Analysis

2012 ◽  
Vol 58 (2) ◽  
Author(s):  
T. V. V. L. N. Rao ◽  
A. M. A. Rani ◽  
T. Nagarajan ◽  
F. M. Hashim
Keyword(s):  
Friction Coefficient ◽  
Coefficient Of Friction ◽  
Carrying Capacity ◽  
Journal Bearing ◽  
Load Capacity ◽  
Load Carrying Capacity ◽  
Load Carrying ◽  
Bearing Analysis

The present study examines the influence of partial texturing of bearing surfaces on improvement in load capacity and reduction in friction coefficient for slider and journal bearing. The geometry of partially textured slider and journal bearing considered in this work composed of a number of successive regions of groove and land configurations. The nondimensional pressure expressions for the partially textured slider and journal bearing are derived taking into consideration of texture geometry and extent of partial texture. Partial texturing has a potential to generate load carrying capacity and reduce coefficient of friction, even for nominally parallel bearing surfaces.

scholarly journals Load-Carrying Capacity of Short Concrete Columns Reinforced with Glass Fiber Reinforced Polymer Bars Under Concentric Axial Load

2019 ◽  
Vol 9 (2) ◽  
pp. 1712-1719
Keyword(s):  
Carrying Capacity ◽  
Load Capacity ◽  
Plain Concrete ◽  
Concrete Columns ◽  
Reinforcement Ratio ◽  
Load Carrying Capacity ◽  
Rc Columns ◽  
Gfrp Bars ◽  
Glass Fiber Reinforced ◽  
Load Carrying

In this paper, 1 group of plain concrete square columns 150×150×600 mm and 11 groups of concrete columns reinforced with glass fiber reinforced polymer (GFRP) were cast and tested, each group contains of 3 specimens. These experiments investigated effect of the main reinforcement ratio, stirrup spacing and contribution of longitudinal GFRP bars on the load carrying capacity of GFRP reinforced concrete (RC) columns. Based on the experiment results, the relationship between load-capacity and reinforcement ratio and the plot of contribution of longitudinal GFRP bars to load-capacity versus the reinforcement ratio were built and analyzed. By increasing the reinforcement ratio from 0.36% to 3.24%, the average ultimate strain in columns at maximum load increases from 2.64% to 75.6% and the load-carrying capacity of GFRP RC columns increases from 3.4% to 25.7% in comparison with the average values of plain concrete columns. Within the investigated range of reinforcement ratio, the longitudinal GFRP bars contributed about 0.72%-6.71% of the ultimate load-carrying capacity of the GFRP RC columns. Meanwhile, with the same configuration of reinforcement, contribution of GFRP bars to load-carrying capacity of GFRP RC columns decreases when increasing the concrete strength. The influence of tie spacing on load-carrying capacity of reinforced columns was also taken into consideration. Additionally, experimental results allow us to propose some modifications on the existing formulas to determine the bearing capacity of the GFRP RC column according to the compressive strength of concrete and GFRP bars.

scholarly journals Contact Analysis and Static Load Carrying Capacity of Planetary Roller Screw Mechanism

2020 ◽  
Author(s):  
Nam Su Kim ◽  
Kyongho Kim ◽  
Sinhyok Jong
Keyword(s):  
Finite Element ◽  
Contact Stress ◽  
Carrying Capacity ◽  
Static Load ◽  
Load Capacity ◽  
Load Carrying Capacity ◽  
Elastic Plastic ◽  
Load Carrying ◽  
Roller Screw ◽  
Screw Mechanism

Abstract This paper aims to investigate the contact characteristics and static load carrying capacity of planetary roller screw mechanism (PRSM). Compared to the ball screw mechanism, the advantages of the PRSM are high stiffness, high load capacity, long travel life and compact structure, etc., since the PRSM possesses more contact points than ball screws in a comparable size. The actuated load is carried through the threaded surface contacts of the screw, the rollers and the nut and the contact characteristics of these components are very important for studying the wear, transmission accuracy and efficiency of a PRSM. Prior work has neglected to take a fundamental approach towards understanding the elastic-plastic contact characteristics of threaded surfaces under high loads and it is closely related to the static load carrying capacity of PRSM. Accordingly, in this paper, the contact characteristics of PRSM under the different working loads are modeled based on Hertz contact theory and the calculation formulas between normal force of thread turns and the elastic-plastic contact stress and deformation are derived. Then, it goes further to derive a calculation method of static load carrying capacity of PRSM based on simplified model of static load distribution. Finally, a verification model is developed by finite element method (FEM) to perform contact stress and strain analysis of PRSM. Besides, through the comparison of the results between the theory model and ANSYS Workbench finite element model verify the reliability of the theory.

Geometry Optimization of Textured Three-Dimensional Micro- Thrust Bearings

2011 ◽  
Vol 133 (4) ◽  
Author(s):  
C. I. Papadopoulos ◽  
E. E. Efstathiou ◽  
P. G. Nikolakopoulos ◽  
L. Kaiktsis
Keyword(s):  
Carrying Capacity ◽  
Stokes Equations ◽  
Load Capacity ◽  
Three Dimensional ◽  
Load Carrying Capacity ◽  
Thrust Bearings ◽  
Micro Channels ◽  
Wide Range ◽  
Load Carrying ◽  
Bearing Load

This paper presents an optimization study of the geometry of three-dimensional micro-thrust bearings in a wide range of convergence ratios. The optimization goal is the maximization of the bearing load carrying capacity. The bearings are modeled as micro-channels, consisting of a smooth moving wall (rotor), and a stationary wall (stator) with partial periodic rectangular texturing. The flow field is calculated from the numerical solution of the Navier-Stokes equations for incompressible isothermal flow; processing of the results yields the bearing load capacity and friction coefficient. The geometry of the textured channel is defined parametrically for several width-to-length ratios. Optimal texturing geometries are obtained by utilizing an optimization tool based on genetic algorithms, which is coupled to the CFD code. Here, the design variables define the bearing geometry and convergence ratio. To minimize the computational cost, a multi-objective approach is proposed, consisting in the simultaneous maximization of the load carrying capacity and minimization of the bearing convergence ratio. The optimal solutions, identified based on the concept of Pareto dominance, are equivalent to those of single-objective optimization problems for different convergence ratio values. The present results demonstrate that the characteristics of the optimal texturing patterns depend strongly on both the convergence ratio and the width-to-length ratio. Further, the optimal load carrying capacity increases at increasing convergence ratio, up to an optimal value, identified by the optimization procedure. Finally, proper surface texturing provides substantial load carrying capacity even for parallel or slightly diverging bearings. Based on the present results, we propose simple formulas for the design of textured micro-thrust bearings.

Strengthening Space Trusses by Diagonal Removal

1993 ◽  
Vol 8 (4) ◽  
pp. 231-239 ◽  
Author(s):  
Mousa Tabatabaei ◽  
Cedric Marsh
Keyword(s):  
Carrying Capacity ◽  
Load Capacity ◽  
Maximum Load ◽  
Load Carrying Capacity ◽  
Shear Forces ◽  
Equitable Distribution ◽  
Space Truss ◽  
Load Carrying ◽  
Space Trusses ◽  
Selection Of

Ideally a space truss is composed of bars each of which is suited to the load it carries. In practice, however, it is more convenient to use a limited number of bar sizes, thus only a few of the members will be fully stressed when the maximum load capacity of the space truss is reached. In order to effect a more equitable distribution of forces between chords of equal size such that more chord members are loaded close to their capacity, selected diagonals are removed to control the path followed by the shear forces, and thereby control the forces entering the chords. In this paper the effect of diagonal removal on space trusses is demonstrated and a method for selection of the diagonals whose removal gives optimum increase in the load carrying capacity of a space truss is described.

An Analytical Solution for the Normal Load Carrying Capacity of Lightly Loaded Cylinders in Combined Rolling, Sliding and Normal Motion

1981 ◽  
Vol 103 (3) ◽  
pp. 467-468 ◽  
Author(s):  
T. F. Conry
Keyword(s):  
Analytical Solution ◽  
Film Thickness ◽  
Exponential Function ◽  
Carrying Capacity ◽  
Normal Load ◽  
Load Capacity ◽  
Load Carrying Capacity ◽  
Load Carrying ◽  
Minimum Film Thickness

The analytical solution for the normal load carrying capacity of lightly loaded cylinders in combined rolling, sliding and normal motion is obtained. It is shown that the load capacity is inversely proportional to the dimensionless minimum film thickness. The results are presented graphically and approximated in the form of an exponential function.

Buckling of Barreled Shells Subjected to External Hydrostatic Pressure

2000 ◽  
Vol 123 (2) ◽  
pp. 232-239 ◽  
Author(s):  
J. Błachut ◽  
P. Wang
Keyword(s):  
Carrying Capacity ◽  
Ultimate Load ◽  
Load Capacity ◽  
External Pressure ◽  
Load Carrying Capacity ◽  
External Hydrostatic Pressure ◽  
Buckling Loads ◽  
Load Carrying ◽  
Initial Geometric Imperfections ◽  
Steel Cylindrical Shell

The paper considers barreling of a mild steel cylindrical shell as a way of improving its load carrying capacity when subjected to static external pressure. Numerical results show that the load carrying capacity can be increased from 1.4 to 40 times above the load capacity of mass equivalent cylinders. The effect of end boundary conditions on the ultimate load is examined together with sensitivity of buckling loads to initial geometric imperfections.

Sign in / Sign up

Export Citation Format

Share Document