scholarly journals Tree Shape Variability in a Mixed Oak Forest Using Terrestrial Laser Technology: Implications for Mating System Analysis

Forests ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 253
Author(s):  
Vlăduț Remus Tomșa ◽  
Alexandru Lucian Curtu ◽  
Mihai Daniel Niță
Keyword(s):  
Mating System ◽  
High Speed ◽  
Laser Scanning ◽  
System Analysis ◽  
Branch Length ◽  
Point Clouds ◽  
Oak Forest ◽  
White Oak ◽  
Tree Shape ◽  
3D Point Clouds

The accuracy of the description regarding tree architecture is crucial for data processing. LiDAR technology is an efficient solution for capturing the characteristics of individual trees. The aim of the present study was to analyze tree shape variability in a mixed oak forest consisting of four European white oak species: Quercus petraea, Q. frainetto, Q. pubescens, and Q. robur. Moreover, we tested for association between tree shape and individual heterozygosity and whether oak trees identified as pollen donors in a previous genetic study have a larger size in terms of crown and trunk characteristics than non-donors. The woody structure of a tree was defined by the quantitative structure model (QSM) providing information about topology (branching structure), geometry, and volume. For extracting the 3D point clouds a high-speed 3D scanner (FARO FocusS 70) was used. The crown variables were strongly correlated to each other, the branch volume being influenced by branch length, maximum branch order, and the number of branches but not influenced by diameter at breast height (DBH), trunk length, trunk volume, or tree height. There was no relationship between the individual heterozygosity based on nuclear microsatellite genetic markers and crown and trunk characteristics, respectively. Branch volume, total area, DBH, trunk volume, and the total volume of tree were significantly larger in pollen donors compared to non-donor Q. petraea trees. Thus, the mean branch volume was more than three times higher. Pollen donors had nearly two and half times larger total area in comparison to non-donor individuals. Our results suggest that a thorough characterization of tree phenotype using terrestrial laser scanning may contribute to a better understanding of mating system patterns in oak forests.

scholarly journals BIM Supported Surveying and Imaging Combination for Heritage Conservation

2021 ◽  
Vol 13 (8) ◽  
pp. 1584
Author(s):  
Pedro Martín-Lerones ◽  
David Olmedo ◽  
Ana López-Vidal ◽  
Jaime Gómez-García-Bermejo ◽  
Eduardo Zalama
Keyword(s):  
Laser Scanning ◽  
Point Clouds ◽  
Cloud Data ◽  
Industry Foundation Classes ◽  
3D Point Clouds ◽  
Conservation Actions ◽  
Heritage Building ◽  
2D Imaging ◽  
Digital Survey ◽  
Level 2

As the basis for analysis and management of heritage assets, 3D laser scanning and photogrammetric 3D reconstruction have been probed as adequate techniques for point cloud data acquisition. The European Directive 2014/24/EU imposes BIM Level 2 for government centrally procured projects as a collaborative process of producing federated discipline-specific models. Although BIM software resources are intensified and increasingly growing, distinct specifications for heritage (H-BIM) are essential to driving particular processes and tools to efficiency shifting from point clouds to meaningful information ready to be exchanged using non-proprietary formats, such as Industry Foundation Classes (IFC). This paper details a procedure for processing enriched 3D point clouds into the REVIT software package due to its worldwide popularity and how closely it integrates with the BIM concept. The procedure will be additionally supported by a tailored plug-in to make high-quality 3D digital survey datasets usable together with 2D imaging, enhancing the capability to depict contextualized important graphical data to properly planning conservation actions. As a practical example, a 2D/3D enhanced combination is worked to accurately include into a BIM project, the length, orientation, and width of a big crack on the walls of the Castle of Torrelobatón (Spain) as a representative heritage building.

scholarly journals Automated Visual Recognizability Evaluation of Traffic Sign Based on 3D LiDAR Point Clouds

2019 ◽  
Vol 11 (12) ◽  
pp. 1453 ◽  
Author(s):  
Shanxin Zhang ◽  
Cheng Wang ◽  
Lili Lin ◽  
Chenglu Wen ◽  
Chenhui Yang ◽  
...  
Keyword(s):  
Traffic Safety ◽  
Laser Scanning ◽  
Large Scale ◽  
Evaluation Method ◽  
Evaluation Model ◽  
Point Clouds ◽  
Traffic Sign ◽  
Traffic Signs ◽  
3D Point Clouds ◽  
Traffic Environment

Maintaining the high visual recognizability of traffic signs for traffic safety is a key matter for road network management. Mobile Laser Scanning (MLS) systems provide efficient way of 3D measurement over large-scale traffic environment. This paper presents a quantitative visual recognizability evaluation method for traffic signs in large-scale traffic environment based on traffic recognition theory and MLS 3D point clouds. We first propose the Visibility Evaluation Model (VEM) to quantitatively describe the visibility of traffic sign from any given viewpoint, then we proposed the concept of visual recognizability field and Traffic Sign Visual Recognizability Evaluation Model (TSVREM) to measure the visual recognizability of a traffic sign. Finally, we present an automatic TSVREM calculation algorithm for MLS 3D point clouds. Experimental results on real MLS 3D point clouds show that the proposed method is feasible and efficient.

scholarly journals USING MOBILE LASER SCANNING DATA FOR FEATURES EXTRACTION OF HIGH ACCURACY DRIVING MAPS

2016 ◽  
Vol XLI-B3 ◽  
pp. 433-439 ◽  
Author(s):  
Bisheng Yang ◽  
Yuan Liu ◽  
Fuxun Liang ◽  
Zhen Dong
Keyword(s):  
Laser Scanning ◽  
Human Error ◽  
Traffic Accidents ◽  
Three Dimensional ◽  
Point Clouds ◽  
High Accuracy ◽  
3D Point Clouds ◽  
Assistant Systems ◽  
Novel Method ◽  
High Flexibility

High Accuracy Driving Maps (HADMs) are the core component of Intelligent Drive Assistant Systems (IDAS), which can effectively reduce the traffic accidents due to human error and provide more comfortable driving experiences. Vehicle-based mobile laser scanning (MLS) systems provide an efficient solution to rapidly capture three-dimensional (3D) point clouds of road environments with high flexibility and precision. This paper proposes a novel method to extract road features (e.g., road surfaces, road boundaries, road markings, buildings, guardrails, street lamps, traffic signs, roadside-trees, power lines, vehicles and so on) for HADMs in highway environment. Quantitative evaluations show that the proposed algorithm attains an average precision and recall in terms of 90.6% and 91.2% in extracting road features. Results demonstrate the efficiencies and feasibilities of the proposed method for extraction of road features for HADMs.

A novel method for extracting skeleton of fruit tree from 3D point clouds

2020 ◽  
pp. 2050051
Author(s):  
Shenglian lu ◽  
Guo Li ◽  
Jian Wang
Keyword(s):  
Laser Scanning ◽  
Laser Scanner ◽  
Point Clouds ◽  
Fruit Trees ◽  
Fruit Tree ◽  
Tree Canopy ◽  
3D Point Clouds ◽  
Novel Method ◽  
Manual Interaction ◽  
Traditional Approaches

Tree skeleton could be useful to agronomy researchers because the skeleton describes the shape and topological structure of a tree. The phenomenon of organs’ mutual occlusion in fruit tree canopy is usually very serious, this should result in a large amount of data missing in directed laser scanning 3D point clouds from a fruit tree. However, traditional approaches can be ineffective and problematic in extracting the tree skeleton correctly when the tree point clouds contain occlusions and missing points. To overcome this limitation, we present a method for accurate and fast extracting the skeleton of fruit tree from laser scanner measured 3D point clouds. The proposed method selects the start point and endpoint of a branch from the point clouds by user’s manual interaction, then a backward searching is used to find a path from the 3D point cloud with a radius parameter as a restriction. The experimental results in several kinds of fruit trees demonstrate that our method can extract the skeleton of a leafy fruit tree with highly accuracy.

scholarly journals Special Issue on “Terrestrial Laser Scanning”: Editors’ Notes

Sensors ◽  
2019 ◽  
Vol 19 (20) ◽  
pp. 4569
Author(s):  
Joan R. Rosell-Polo ◽  
Eduard Gregorio ◽  
Jordi Llorens
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Special Issue ◽  
Alternative Technologies ◽  
Cloud Processing ◽  
3D Point Clouds ◽  
Point Cloud Processing

In this editorial, we provide an overview of the content of the special issue on “Terrestrial Laser Scanning”. The aim of this Special Issue is to bring together innovative developments and applications of terrestrial laser scanning (TLS), understood in a broad sense. Thus, although most contributions mainly involve the use of laser-based systems, other alternative technologies that also allow for obtaining 3D point clouds for the measurement and the 3D characterization of terrestrial targets, such as photogrammetry, are also considered. The 15 published contributions are mainly focused on the applications of TLS to the following three topics: TLS performance and point cloud processing, applications to civil engineering, and applications to plant characterization.

scholarly journals Comparing Machine and Deep Learning Methods for Large 3D Heritage Semantic Segmentation

2020 ◽  
Vol 9 (9) ◽  
pp. 535
Author(s):  
Francesca Matrone ◽  
Eleonora Grilli ◽  
Massimo Martini ◽  
Marina Paolanti ◽  
Roberto Pierdicca ◽  
...  
Keyword(s):  
Deep Learning ◽  
Cultural Heritage ◽  
Laser Scanning ◽  
Semantic Segmentation ◽  
Point Clouds ◽  
Classification Algorithms ◽  
Learning Methods ◽  
3D Point Clouds ◽  
The Subject

In recent years semantic segmentation of 3D point clouds has been an argument that involves different fields of application. Cultural heritage scenarios have become the subject of this study mainly thanks to the development of photogrammetry and laser scanning techniques. Classification algorithms based on machine and deep learning methods allow to process huge amounts of data as 3D point clouds. In this context, the aim of this paper is to make a comparison between machine and deep learning methods for large 3D cultural heritage classification. Then, considering the best performances of both techniques, it proposes an architecture named DGCNN-Mod+3Dfeat that combines the positive aspects and advantages of these two methodologies for semantic segmentation of cultural heritage point clouds. To demonstrate the validity of our idea, several experiments from the ArCH benchmark are reported and commented.

scholarly journals Shape distribution features for point cloud analysis – a geometric histogram approach on multiple scales

2014 ◽  
Vol II-3 ◽  
pp. 9-16 ◽  
Author(s):  
R. Blomley ◽  
M. Weinmann ◽  
J. Leitloff ◽  
B. Jutzi
Keyword(s):  
Laser Scanning ◽  
Multiple Scales ◽  
Point Clouds ◽  
Full Potential ◽  
Shape Distribution ◽  
3D Point Clouds ◽  
Distribution Features ◽  
Reliable Performance ◽  
Scale Range ◽  
Wide Scale

Due to ever more efficient and accurate laser scanning technologies, the analysis of 3D point clouds has become an important task in modern photogrammetry and remote sensing. To exploit the full potential of such data for structural analysis and object detection, reliable geometric features are of crucial importance. Since multiscale approaches have proved very successful for image-based applications, efforts are currently made to apply similar approaches on 3D point clouds. In this paper we analyse common geometric <i>covariance</i> features, pinpointing some severe limitations regarding their performance on varying scales. Instead, we propose a different feature type based on <i>shape distributions</i> known from object recognition. These novel features show a very reliable performance on a wide scale range and their results in classification outnumber <i>covariance</i> features in all tested cases.

scholarly journals VALIDATING A WORKFLOW FOR TREE INVENTORY UPDATING WITH 3D POINT CLOUDS OBTAINED BY MOBILE LASER SCANNING

2018 ◽  
Vol XLII-2 ◽  
pp. 1163-1168
Author(s):  
J. Wang ◽  
R. Lindenbergh
Keyword(s):  
Tree Species ◽  
Laser Scanning ◽  
Spatial Information ◽  
Open Data ◽  
Point Clouds ◽  
Urban Trees ◽  
Biomass Estimation ◽  
Species Classification ◽  
3D Point Clouds ◽  
Tree Inventory

Urban trees are an important component of our environment and ecosystem. Trees are able to combat climate change, clean the air and cool the streets and city. Tree inventory and monitoring are of great interest for biomass estimation and change monitoring. Conventionally, parameters of trees are manually measured and documented in situ, which is not efficient regarding labour and costs. Light Detection And Ranging (LiDAR) has become a well-established surveying technique for the acquisition of geo-spatial information. Combined with automatic point cloud processing techniques, this in principle enables the efficient extraction of geometric tree parameters. In recent years, studies have investigated to what extend it is possible to perform tree inventories using laser scanning point clouds. Give the availability of a city of Delft Open data tree repository, we are now able to present, validate and extend a workflow to automatically obtain tree data from tree location until tree species. The results of a test over 47 trees show that the proposed methods in the workflow are able to individual urban trees. The tree species classification results based on the extracted tree parameters show that only one tree was wrongly classified using k-means clustering.

scholarly journals DIGITAL TERRAIN MODELS FROM MOBILE LASER SCANNING DATA IN MORAVIAN KARST

2016 ◽  
Vol XLI-B3 ◽  
pp. 387-394 ◽  
Author(s):  
N. Tyagur ◽  
M. Hollaus
Keyword(s):  
Czech Republic ◽  
Laser Scanning ◽  
Point Clouds ◽  
Low Noise ◽  
Data Sets ◽  
The Czech Republic ◽  
Digital Terrain ◽  
3D Point Clouds ◽  
Moravian Karst

During the last ten years, mobile laser scanning (MLS) systems have become a very popular and efficient technology for capturing reality in 3D. A 3D laser scanner mounted on the top of a moving vehicle (e.g. car) allows the high precision capturing of the environment in a fast way. Mostly this technology is used in cities for capturing roads and buildings facades to create 3D city models. In our work, we used an MLS system in Moravian Karst, which is a protected nature reserve in the Eastern Part of the Czech Republic, with a steep rocky terrain covered by forests. For the 3D data collection, the Riegl VMX 450, mounted on a car, was used with integrated IMU/GNSS equipment, which provides low noise, rich and very dense 3D point clouds. <br><br> The aim of this work is to create a digital terrain model (DTM) from several MLS data sets acquired in the neighbourhood of a road. The total length of two covered areas is 3.9 and 6.1 km respectively, with an average width of 100 m. For the DTM generation, a fully automatic, robust, hierarchic approach was applied. The derivation of the DTM is based on combinations of hierarchical interpolation and robust filtering for different resolution levels. For the generation of the final DTMs, different interpolation algorithms are applied to the classified terrain points. The used parameters were determined by explorative analysis. All MLS data sets were processed with one parameter set. As a result, a high precise DTM was derived with high spatial resolution of 0.25 x 0.25 m. The quality of the DTMs was checked by geodetic measurements and visual comparison with raw point clouds. The high quality of the derived DTM can be used for analysing terrain changes and morphological structures. Finally, the derived DTM was compared with the DTM of the Czech Republic (DMR 4G) with a resolution of 5 x 5 m, which was created from airborne laser scanning data. The vertical accuracy of the derived DTMs is around 0.10 m.

Sign in / Sign up

Export Citation Format

Share Document