scholarly journals Machinery-Induced Damage to Soil and Remaining Forest Stands—Case Study from Slovakia

Forests ◽  
2020 ◽  
Vol 11 (12) ◽  
pp. 1289
Author(s):  
Zuzana Dudáková (Allmanová) ◽  
Michal Allman ◽  
Ján Merganič ◽  
Katarína Merganičová
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Bulk Density ◽  
Soil Moisture Content ◽  
Soil Bulk Density ◽  
Forest Stands ◽  
Forest Operations ◽  
Factorial Anova ◽  
Size Type ◽  
The Impact

The paper deals with the damage of the remaining stand and soil caused by harvesting using three ground-based forest operations methods (harvester-forwarder/cable skidder/animal-tractor). It compares the impact of the most common harvesting technologies applied in Slovakia and in Central Europe and thus contributes with valuable information to the knowledge on the suitability of their application in forests stands dominated by broadleaved tree species. Harvesting was performed in five forest stands located at the University Forest Enterprise of Technical University in Zvolen in central Slovakia from August to October 2019. Damage to remaining trees was assessed from the point of its size, type, and position of damage along stem. We expected lower damage of remaining trees in stands where harvesters were used because of the applied cut-to-length short wood system and fully mechanized harvesting system. In addition, we examined soil bulk density and soil moisture content in ruts, space between ruts, and in undisturbed stand to reveal the impact of harvesting machinery on soil. We expected greater soil bulk densities and lower soil moisture content in these stands due to the greatest weight of harvesters and in ruts created by machinery compared with undisturbed stand soil. The highest percentage of damaged remaining trees equal to 20.47% and 23.36% was recorded for harvester forest operations, followed by skidder (19.44%) and animal forest operations with 19.86% and 14.47%. Factorial ANOVA confirmed significant higher soil compaction in stands where harvesters were used (higer bulk density) than in stands where skidding was performed with the skidder and animal power. Higher soil moisture content was recorded in ruts created by harvesters and the skidder. The lowest soil moisture content was in undisturbed stands irrespective of the applied forest operation method.

scholarly journals Predicting rut depth induced by an 8-wheeled forwarder in fine-grained boreal forest soils

2020 ◽  
Vol 77 (2) ◽  
Author(s):  
Jori Uusitalo ◽  
Jari Ala-Ilomäki ◽  
Harri Lindeman ◽  
Jenny Toivio ◽  
Matti Siren
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Bulk Density ◽  
Soil Moisture Content ◽  
Mineral Soil ◽  
Coarse Grained ◽  
Forest Operations ◽  
Fine Grained ◽  
Humus Layer ◽  
Cumulative Mass

Abstract Key message Rut depth in fine-grained boreal soils induced by an 8-wheeled forwarder is best predicted with soil moisture content, cumulative mass of machine passes, bulk density and thickness of the humus layer. Context Forest machines are today very heavy and will cause serious damage to soil and prevent future growth if forest operations are carried out at the wrong time of the year. Forest operations performed during the wettest season should therefore be directed at coarse-grained soils that are not as prone to soil damage. Aims The study aimed at investigating the significance of the most important soil characteristics on rutting and developing models that can be utilized in predicting rutting prior to forest operations. Methods A set of wheeling tests on two fine-grained mineral soil stands in Southern Finland were performed. The wheeling experiments were conducted in three different periods of autumn in order to get the largest possible variation in moisture content. The test drives were carried out with an 8-wheeled forwarder. Results Soil moisture content is the most important factor affecting rut depth. Rut depth of an 8-wheeled forwarder in fine-grained boreal soil is best predicted with soil moisture content, cumulative mass of machine passes, bulk density and thickness of the humus layer. Conclusion The results emphasize the importance of moisture content on the risk of rutting in fine-grained mineral soils, especially with high moisture content values when soil saturation reaches 80%. The results indicate that it is of high importance that soil type and soil wetness can be predicted prior to forest operations.

scholarly journals Effect of Biochar on Soil Temperature under High Soil Surface Temperature in Coal Mined Arid and Semiarid Regions

2020 ◽  
Vol 12 (19) ◽  
pp. 8238
Author(s):  
Jibing Xiong ◽  
Runhua Yu ◽  
Ejazul Islam ◽  
Fuhai Zhu ◽  
Jianfeng Zha ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Surface Temperature ◽  
Soil Temperature ◽  
Bulk Density ◽  
Soil Moisture Content ◽  
Soil Surface ◽  
Soil Bulk Density ◽  
High Soil ◽  
Soil Surface Temperature

High soil surface temperature and loosened soil are major limiting factors of plant productivity in arid and semi-arid coal mining areas of China. Moreover, the extensive and illegitimate burning of crop residues is causing environmental pollution; whereas, these residues could be converted to biochar to benefit soil quality. In this study, the effect of wheat straw biochar (WSB) at rates of 0% (control, CK), 1% (low, LB), 2% (medium, MB) and 4% (high, HB) on soil temperature at different depths (5, 10, 15, and 20 cm) and moisture levels (10 and 20%) was investigated under high soil surface temperature of 50 °C and air humidity of 40%. Our data suggested that soil bulk density was inversely, and soil moisture was directly corelated with soil thermal parameters. Moreover, the increasing rate of WSB addition linearly decreased the soil thermal properties. The maximum decrease in soil bulk density at both moisture levels (10% and 20%) was measured in HB treatment compared to respective CKs. The highest decrease in soil thermal conductivity (59.8% and 24.7%) was found under HB treatment in comparison to respective controls (CK10% and CK20% moisture). The soil volumetric heat capacity was also strongly corelated with soil moisture content (r = 0.91). The WSB treatments displayed differential responses to soil temperature. Under 10% soil moisture, temperature of LB, MB and HB treatments was higher as compared to CK at 5–20 cm depth, and MB treated soil had the smallest increase in temperature. At the 15-cm depth, the MB treatment decreased the temperature by 0.93 °C as compared to the CK20%. Therefore, the effect of WSB on soil temperature was influenced by soil moisture content, soil depth and WSB application rates. It suggested that MB treatment could be a useful farming practice for mitigating soil temperature fluctuation.

scholarly journals A GNSS-IR Method for Retrieving Soil Moisture Content from Integrated Multi-Satellite Data That Accounts for the Impact of Vegetation Moisture Content

2021 ◽  
Vol 13 (13) ◽  
pp. 2442
Author(s):  
Jichao Lv ◽  
Rui Zhang ◽  
Jinsheng Tu ◽  
Mingjie Liao ◽  
Jiatai Pang ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Satellite Data ◽  
Vegetation Index ◽  
Soil Moisture Content ◽  
Support Vector ◽  
Observation Data ◽  
Multipath Effect ◽  
Mars Model ◽  
The Impact

There are two problems with using global navigation satellite system-interferometric reflectometry (GNSS-IR) to retrieve the soil moisture content (SMC) from single-satellite data: the difference between the reflection regions, and the difficulty in circumventing the impact of seasonal vegetation growth on reflected microwave signals. This study presents a multivariate adaptive regression spline (MARS) SMC retrieval model based on integrated multi-satellite data on the impact of the vegetation moisture content (VMC). The normalized microwave reflection index (NMRI) calculated with the multipath effect is mapped to the normalized difference vegetation index (NDVI) to estimate and eliminate the impact of VMC. A MARS model for retrieving the SMC from multi-satellite data is established based on the phase shift. To examine its reliability, the MARS model was compared with a multiple linear regression (MLR) model, a backpropagation neural network (BPNN) model, and a support vector regression (SVR) model in terms of the retrieval accuracy with time-series observation data collected at a typical station. The MARS model proposed in this study effectively retrieved the SMC, with a correlation coefficient (R2) of 0.916 and a root-mean-square error (RMSE) of 0.021 cm3/cm3. The elimination of the vegetation impact led to 3.7%, 13.9%, 11.7%, and 16.6% increases in R2 and 31.3%, 79.7%, 49.0%, and 90.5% decreases in the RMSE for the SMC retrieved by the MLR, BPNN, SVR, and MARS model, respectively. The results demonstrated the feasibility of correcting the vegetation changes based on the multipath effect and the reliability of the MARS model in retrieving the SMC.

scholarly journals Draft Requirement of Two Animal - Drawn Institute for Agricultural Research (IAR) Weeders

2020 ◽  
pp. 14-20
Author(s):  
Y. A. Unguwanrimi ◽  
A. M. Sada ◽  
G. N. Ugama ◽  
H. S. Garuba ◽  
A. Ugoani
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Bulk Density ◽  
Soil Moisture Content ◽  
Agricultural Research ◽  
Soil Samples ◽  
Soil Conditions ◽  
Experimental Plot ◽  
Moisture Contents ◽  
Loam Soil

Draft requirements of two animal – drawn (IAR) weeders operating on loam soil were determined in the study. The implements include a straddle row weeder and an emcot attached rotary weeder evaluated under the same soil conditions, using a pair of white Fulani breed of oxen. The animal draft requirement was first estimated from the animal ergonomics measurements. Using area of 0.054 hectare as experimental plot for each implement the draft requirement of each implement was investigated after taking soil samples for soil moisture content and bulk density determinations. The implements tested showed variation in their average draft requirement. The straddle row weeder had the highest value of 338.15 N respectively while the emcot attached rotary weeder had the lowest value of 188.12 N with 47.03%, respectively. The average soil moisture contents and bulk density were 13.0% and 1.46%/cm3, respectively.

scholarly journals EFFECTS OF HYDROPHILIC POLYMERS AND ORGANIC AMENDMENTS ON ESTABLISHMENT OF KENTUCKY BLUEGRASS.

HortScience ◽  
1992 ◽  
Vol 27 (6) ◽  
pp. 588a-588
Author(s):  
A. James Downer ◽  
Ben Faber ◽  
Richard White
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Water Content ◽  
Soil Moisture Content ◽  
Organic Amendments ◽  
Kentucky Bluegrass ◽  
Soil Bulk Density ◽  
Time Domain Reflectometry ◽  
Peat Moss ◽  
Turf Quality

Three polymers (a polyacrylamide, polyacrylate and a propenoate-propenamide copolymer) and three organic amendments (peat moss, wood shavings, and composted yardwaste) were incorporated at five rates in a sandy soil to 15cm depth. Soil moisture content was determined by time domain reflectometry and gravimetrically. Only the highest polymer rates (2928kg/ha [60#/1000sq.ft.]) produced significant increases in soil moisture content and reductions of soil bulk density. Peat moss and yardwaste increased soil water content while shavings decreased water content. Turf quality scores were not affected by polymers but were initially reduced by yardwaste and shavings.

Sign in / Sign up

Export Citation Format

Share Document