scholarly journals The Best Urban Trees for Daytime Cooling Leave Nights Slightly Warmer

Forests ◽  
2020 ◽  
Vol 11 (9) ◽  
pp. 945
Author(s):  
Agnieszka Wujeska-Klause ◽  
Sebastian Pfautsch
Keyword(s):  
Tree Species ◽  
Surface Air Temperature ◽  
Canopy Cover ◽  
Urban Trees ◽  
Radiative Cooling ◽  
Street Trees ◽  
Near Surface ◽  
Canopy Density ◽  
Air Temperatures ◽  
Urban Heat

Summer air temperatures will continue to rise in metropolitan regions due to climate change and urbanization, intensifying daytime and nighttime air temperatures and result in greater thermal discomfort for city dwellers. Urban heat may be reduced by trees which provide shade, decreasing air and surface temperatures underneath their canopies. We asked whether tree height and canopy density can help to identify species that provide greater microclimate benefits during day and night. We also asked if increased canopy cover of street trees provides similar microclimate benefits. We used continuous measurements of near-surface air temperatures under 36 park trees and from two urban streets to assess these questions. In the park, trees were grouped according to their height (<10 m, 10–20 m, >20 m) and canopy density (low, high), while the effect of canopy cover was tested using streets with high (31%) and low (11%) cover. Daytime near-surface air temperature declined with increasing height and canopy density providing significant cooling benefits. However, this trend was reversed at night when tall trees with dense canopies restricted longwave radiative cooling and trapped warm air beneath their crowns. High canopy cover of street trees reduced daytime air temperatures more, resulting in a lower number of days with hot (>35 °C) and extreme (>40 °C) air temperatures compared to the street that had low canopy cover. These findings suggest that tree species and streetscapes with dense canopy cover improve local thermal conditions during the day but do not seem ideal to allow for nighttime cooling, creating potential discomfort for residents during hot summer nights. Our results indicate that classifying trees using a simple metric can assist in selecting tree species that can alleviate the local negative effect of urban heat during the day, but at the same time, their effect in preventing optimal longwave radiative cooling during the night must be factored into planting strategies.

scholarly journals Evaluation and Comparison of Noah and Pleim–Xiu Land Surface Models in MM5 Using GÖTE2001 Data: Spatial and Temporal Variations in Near-Surface Air Temperature

2007 ◽  
Vol 46 (10) ◽  
pp. 1587-1605 ◽  
Author(s):  
J-F. Miao ◽  
D. Chen ◽  
K. Borne
Keyword(s):  
Soil Moisture ◽  
Air Temperature ◽  
Land Surface ◽  
Model Performance ◽  
Surface Air Temperature ◽  
Near Surface ◽  
Surface Models ◽  
Urban Heat ◽  
Soil Moisture Initialization ◽  
Evident Difference

Abstract In this study, the performance of two advanced land surface models (LSMs; Noah LSM and Pleim–Xiu LSM) coupled with the fifth-generation Pennsylvania State University–National Center for Atmospheric Research Mesoscale Model (MM5), version 3.7.2, in simulating the near-surface air temperature in the greater Göteborg area in Sweden is evaluated and compared using the GÖTE2001 field campaign data. Further, the effects of different planetary boundary layer schemes [Eta and Medium-Range Forecast (MRF) PBLs] for Noah LSM and soil moisture initialization approaches for Pleim–Xiu LSM are investigated. The investigation focuses on the evaluation and comparison of diurnal cycle intensity and maximum and minimum temperatures, as well as the urban heat island during the daytime and nighttime under the clear-sky and cloudy/rainy weather conditions for different experimental schemes. The results indicate that 1) there is an evident difference between Noah LSM and Pleim–Xiu LSM in simulating the near-surface air temperature, especially in the modeled urban heat island; 2) there is no evident difference in the model performance between the Eta PBL and MRF PBL coupled with the Noah LSM; and 3) soil moisture initialization is of crucial importance for model performance in the Pleim–Xiu LSM. In addition, owing to the recent release of MM5, version 3.7.3, some experiments done with version 3.7.2 were repeated to reveal the effects of the modifications in the Noah LSM and Pleim–Xiu LSM. The modification to longwave radiation parameterizations in Noah LSM significantly improves model performance while the adjustment of emissivity, one of the vegetation properties, affects Pleim–Xiu LSM performance to a larger extent. The study suggests that improvements both in Noah LSM physics and in Pleim–Xiu LSM initialization of soil moisture and parameterization of vegetation properties are important.

scholarly journals Polar Amplification and Ice Free Conditions under 1.5, 2 and 3 °C of Global Warming as Simulated by CMIP5 and CMIP6 Models

Atmosphere ◽  
2021 ◽  
Vol 12 (11) ◽  
pp. 1494
Author(s):  
Fernanda Casagrande ◽  
Francisco A. B. Neto ◽  
Ronald B. de Souza ◽  
Paulo Nobre
Keyword(s):  
Global Warming ◽  
Temperature Response ◽  
Surface Air Temperature ◽  
The Arctic ◽  
Polar Regions ◽  
High Latitudes ◽  
Near Surface ◽  
Polar Amplification ◽  
Air Temperatures ◽  
Average Rise

One of the most visible signs of global warming is the fast change in the polar regions. The increase in Arctic temperatures, for instance, is almost twice as large as the global average in recent decades. This phenomenon is known as the Arctic Amplification and reflects several mutually supporting processes. An equivalent albeit less studied phenomenon occurs in Antarctica. Here, we used numerical climate simulations obtained from CMIP5 and CMIP6 to investigate the effects of +1.5, 2 and 3 °C warming thresholds for sea ice changes and polar amplification. Our results show robust patterns of near-surface air-temperature response to global warming at high latitudes. The year in which the average air temperatures brought from CMIP5 and CMIP6 models rises by 1.5 °C is 2024. An average rise of 2 °C (3 °C) global warming occurs in 2042 (2063). The equivalent warming at northern (southern) high latitudes under scenarios of 1.5 °C global warming is about 3 °C (1.8 °C). In scenarios of 3 °C global warming, the equivalent warming in the Arctic (Antarctica) is close to 7 °C (3.5 °C). Ice-free conditions are found in all warming thresholds for both the Arctic and Antarctica, especially from the year 2030 onwards.

scholarly journals The economic benefits of reductions in nitrogen loads from stormwater runoff by street trees

2020 ◽  
Author(s):  
Mariana D. Baptista ◽  
Marco Amati ◽  
Tim D. Fletcher ◽  
Matthew J. Burns
Keyword(s):  
Stormwater Runoff ◽  
Canopy Cover ◽  
Annual Runoff ◽  
Urban Trees ◽  
Deciduous Trees ◽  
Street Trees ◽  
Runoff Volume ◽  
Nitrogen Loads ◽  
Tree Canopy Cover ◽  
The Impact

Abstract It is increasingly recognised that urban trees can contribute to reducing stormwater runoff by intercepting and retaining a fraction of rainfall received. What is less studied is the translation of this to reduced pollutant loads being transferred to receiving streams, rivers, and water bodies. In this paper, we assess interception of two tree species (Eucalyptus microcorys and Ulmus procera) in an urban park. This data is used in simple water balance modelling to predict the environmental and economic benefit of reducing nitrogen loads to receiving waterways as a function of reduced runoff volume resulting from rainfall interception by urban trees on public land (21% of the catchment area). We use a highly urbanized catchment in Melbourne, Australia to demonstrate the impact of an urban forest dominated by deciduous trees, evergreen trees or a mixed tree canopy cover. We found that doubling the urban canopy cover in the catchment, while keeping the current mix ratio of deciduous and evergreen trees, could reduce annual runoff volume by 30 mm (92 MLyr−1). Using the prescribed values that developers must pay the local water authority for nitrogen treatment as a condition of new development, we calculate that this would deliver a nitrogen load removal benefit of AUD$ 200/tree. If only deciduous trees are planted the annual runoff reduction would decrease to 24 mm (73 MLyr−1) and increases to 37 mm (112 MLyr−1) if only evergreen trees are planted. This study highlights both the additional benefits of public street trees and the differences in deciduous and evergreen trees which should be accounted for by policy makers.

scholarly journals An evaluation of the impact of aerosol particles on weather forecasts from a biomass burning aerosol event over the Midwestern United States: observational-based analysis of surface temperature

2016 ◽  
Vol 16 (10) ◽  
pp. 6475-6494 ◽  
Author(s):  
Jianglong Zhang ◽  
Jeffrey S. Reid ◽  
Matthew Christensen ◽  
Angela Benedetti
Keyword(s):  
United States ◽  
Air Temperature ◽  
Surface Air Temperature ◽  
Cooling Efficiency ◽  
Surface Cooling ◽  
Near Surface ◽  
Smoke Aerosol ◽  
Weather Forecasts ◽  
Air Temperatures ◽  
Daily Changes

Abstract. A major continental-scale biomass burning smoke event from 28–30 June 2015, spanning central Canada through the eastern seaboard of the United States, resulted in unforecasted drops in daytime high surface temperatures on the order of 2–5  °C in the upper Midwest. This event, with strong smoke gradients and largely cloud-free conditions, provides a natural laboratory to study how aerosol radiative effects may influence numerical weather prediction (NWP) forecast outcomes. Here, we describe the nature of this smoke event and evaluate the differences in observed near-surface air temperatures between Bismarck (clear) and Grand Forks (overcast smoke), to evaluate to what degree solar radiation forcing from a smoke plume introduces daytime surface cooling, and how this affects model bias in forecasts and analyses. For this event, mid-visible (550 nm) smoke aerosol optical thickness (AOT, τ) reached values above 5. A direct surface cooling efficiency of −1.5 °C per unit AOT (at 550 nm, τ550) was found. A further analysis of European Centre for Medium-Range Weather Forecasts (ECMWF), National Centers for Environmental Prediction (NCEP), United Kingdom Meteorological Office (UKMO) near-surface air temperature forecasts for up to 54 h as a function of Moderate Resolution Imaging Spectroradiometer (MODIS) Dark Target AOT data across more than 400 surface stations, also indicated the presence of the daytime aerosol direct cooling effect, but suggested a smaller aerosol direct surface cooling efficiency with magnitude on the order of −0.25 to −1.0 °C per unit τ550. In addition, using observations from the surface stations, uncertainties in near-surface air temperatures from ECMWF, NCEP, and UKMO model runs are estimated. This study further suggests that significant daily changes in τ550 above 1, at which the smoke-aerosol-induced direct surface cooling effect could be comparable in magnitude with model uncertainties, are rare events on a global scale. Thus, incorporating a more realistic smoke aerosol field into numerical models is currently less likely to significantly improve the accuracy of near-surface air temperature forecasts. However, regions such as eastern China, eastern Russia, India, and portions of the Saharan and Taklamakan deserts, where significant daily changes in AOTs are more frequent, are likely to benefit from including an accurate aerosol analysis into numerical weather forecasts.

scholarly journals Suitability of a constant air temperature lapse rate over an Alpine glacier: testing the Greuell and Böhm model as an alternative

2013 ◽  
Vol 54 (63) ◽  
pp. 120-130 ◽  
Author(s):  
Lene Petersen ◽  
Francesca Pellicciotti ◽  
Inge Juszak ◽  
Marco Carenzo ◽  
Ben Brock
Keyword(s):  
Air Temperature ◽  
Surface Air Temperature ◽  
Ambient Air ◽  
Lapse Rate ◽  
Spatial And Temporal Variability ◽  
Near Surface ◽  
Alpine Glacier ◽  
Temperature Lapse Rate ◽  
Boundary Layer Height ◽  
Air Temperatures

AbstractNear-surface air temperature, typically measured at a height of 2 m, is the most important control on the energy exchange and the melt rate at a snow or ice surface. It is distributed in a simplistic manner in most glacier melt models by using constant linear lapse rates, which poorly represent the actual spatial and temporal variability of air temperature. In this paper, we test a simple thermodynamic model proposed by Greuell and Böhm in 1998 as an alternative, using a new dataset of air temperature measurements from along the flowline of Haut Glacier d’Arolla, Switzerland. The unmodified model performs little better than assuming a constant linear lapse rate. When modified to allow the ratio of the boundary layer height to the bulk heat transfer coefficient to vary along the flowline, the model matches measured air temperatures better, and a further reduction of the root-mean-square error is obtained, although there is still considerable scope for improvement. The modified model is shown to perform best under conditions favourable to the development of katabatic winds – few clouds, positive ambient air temperature, limited influence of synoptic or valley winds and a long fetch – but its performance is poor under cloudy conditions.

scholarly journals Summer- and Wintertime Variations of the Surface and Near-Surface Urban Heat Island in a Semiarid Environment

2019 ◽  
Vol 34 (6) ◽  
pp. 1849-1865
Author(s):  
Francisco Salamanca Palou ◽  
Alex Mahalov
Keyword(s):  
Air Temperature ◽  
Land Surface ◽  
Wrf Model ◽  
Surface Air Temperature ◽  
Near Surface ◽  
Urban Rural ◽  
Urban Cool Island ◽  
Surface Skin Temperature ◽  
Urban Heat ◽  
Surface Urban Heat Island

Abstract This paper examines summer- and wintertime variations of the surface and near-surface urban heat island (UHI) for the Phoenix metropolitan area using the Moderate Resolution Imaging Spectroradiometer (MODIS), near-surface meteorological observations, and the Weather Research and Forecasting (WRF) Model during a 31-day summer- and a 31-day wintertime period. The surface UHI (defined based on the urban–rural land surface temperature difference) is found to be higher at night and during the warm season. On the other hand, the morning surface UHI is low and frequently exhibits an urban cool island that increases during the summertime period. Similarly, the near-surface UHI (defined based on the urban–rural 2-m air temperature difference) is higher at night and during summertime. On the other hand, the daytime near-surface UHI is low but rarely exhibits an urban cool island. To evaluate the WRF Model’s ability to reproduce the diurnal cycle of near-surface meteorology and surface skin temperature, two WRF Model experiments (one using the Bougeault and Lacarrere turbulent scheme and one with the Mellor–Yamada–Janjić turbulent parameterization) at high spatial resolution (1-km horizontal grid spacing) are conducted for each 31-day period. Modeled results show that the WRF Model (coupled to the Noah-MP land surface model) tends to underestimate to some extent surface skin temperature during daytime and overestimate nighttime values during the wintertime period. In the same way, the WRF Model tends to accurately reproduce the diurnal cycle of near-surface air temperature, including maximum and minimum temperatures, and wind speed during summertime, but notably overestimates nighttime near-surface air temperature during wintertime. This nighttime overestimation is especially remarkable with the Bougeault and Lacarrere turbulent scheme for both urban and rural areas.

scholarly journals The Removal Efficiencies of Several Temperate Tree Species at Adsorbing Airborne Particulate Matter in Urban Forests and Roadsides

Forests ◽  
2019 ◽  
Vol 10 (11) ◽  
pp. 960 ◽  
Author(s):  
Myeong Ja Kwak ◽  
Jongkyu Lee ◽  
Handong Kim ◽  
Sanghee Park ◽  
Yeaji Lim ◽  
...  
Keyword(s):  
Particulate Matter ◽  
Tree Species ◽  
Morphological Characteristics ◽  
Urban Forests ◽  
Urban Trees ◽  
Widespread Species ◽  
Area Index ◽  
Canopy Density ◽  
Leaf Surfaces ◽  
Removal Efficiencies

Although urban trees are proposed as comparatively economical and eco-efficient biofilters for treating atmospheric particulate matter (PM) by the temporary capture and retention of PM particles, the PM removal effect and its main mechanism still remain largely uncertain. Thus, an understanding of the removal efficiencies of individual leaves that adsorb and retain airborne PM, particularly in the sustainable planning of multifunctional green infrastructure, should be preceded by an assessment of the leaf microstructures of widespread species in urban forests. We determined the differences between trees in regard to their ability to adsorb PM based on the unique leaf microstructures and leaf area index (LAI) reflecting their overall ability by upscaling from leaf scale to canopy scale. The micro-morphological characteristics of adaxial and abaxial leaf surfaces directly affected the PM trapping efficiency. Specifically, leaf surfaces with grooves and trichomes showed a higher ability to retain PM as compared to leaves without epidermal hairs or with dynamic water repellency. Zelkova serrata (Thunb.) Makino was found to have significantly higher benefits with regard to adsorbing and retaining PM compared to other species. Evergreen needle-leaved species could be a more sustainable manner to retain PM in winter and spring. The interspecies variability of the PM adsorption efficiency was upscaled from leaf scale to canopy scale based on the LAI, showing that tree species with higher canopy density were more effective in removing PM. In conclusion, if urban trees are used as a means to improve air quality in limited open spaces for urban greening programs, it is important to predominantly select a tree species that can maximize the ability to capture PM by having higher canopy density and leaf grooves or trichomes.

scholarly journals Estimating urban heat island effects on near-surface air temperature records of Uccle (Brussels, Belgium): an observational and modeling study

2011 ◽  
Vol 6 (1) ◽  
pp. 27-34 ◽  
Author(s):  
R. Hamdi ◽  
H. Van de Vyver
Keyword(s):  
Remote Sensing ◽  
Urban Heat Island ◽  
Air Temperature ◽  
Surface Air Temperature ◽  
Heat Island ◽  
Urban Bias ◽  
Near Surface ◽  
Urban Warming ◽  
Urban Heat ◽  
Weather Stations

Abstract. In this letter, the Brussels's urban heat island (UHI) effect on the near-surface air temperature time series of Uccle (the national suburban recording station of the Royal Meteorological Institute of Belgium) was estimated between 1955 and 2006 during the summer months. The UHI of Brussels was estimated using both ground-based weather stations and remote sensing imagery combined with a land surface scheme that includes a state-of-the-art urban parameterization, the Town Energy Balance scheme. Analysis of urban warming based on the remote sensing method reveals that the urban bias on minimum air temperature is rising at a higher rate, 2.5 times (2.85 ground-based observed) more, than on maximum temperature, with a linear trend of 0.15 °C (0.19 °C ground-based observed) and 0.06 °C (0.06 °C ground-based observed) per decade respectively. The summer-mean urban bias on the mean air temperature is 0.8 °C (0.9 °C ground-based observed). The results based on remote sensing imagery are compatible with estimates of urban warming based on weather stations. Therefore, the technique presented in this work is a useful tool in estimating the urban heat island contamination in long time series, countering the drawbacks of an ground-observational approach.

scholarly journals Using the dendro-climatological signal of urban trees as a measure of urbanization and urban heat island

2021 ◽  
Author(s):  
Christoph Schneider ◽  
Burkhard Neuwirth ◽  
Sebastian Schneider ◽  
Daniel Balanzategui ◽  
Stefanie Elsholz ◽  
...  
Keyword(s):  
Urban Heat Island ◽  
Tree Ring ◽  
Air Temperature ◽  
Tree Species ◽  
Urban Climate ◽  
Ring Width ◽  
Urban Trees ◽  
Pedunculate Oak ◽  
Heat Island ◽  
Urban Heat

AbstractUsing dendroclimatological techniques this study investigates whether inner city tree-ring width (TRW) chronologies from eight tree species (ash, beech, fir, larch, lime, sessile and pedunculate oak, and pine) are suitable to examine the urban heat island of Berlin, Germany. Climate-growth relationships were analyzed for 18 sites along a gradient of increasing urbanization covering Berlin and surrounding rural areas. As a proxy for defining urban heat island intensities at each site, we applied urbanization parameters such as building fraction, impervious surfaces, and green areas. The response of TRW to monthly and seasonal air temperature, precipitation, aridity, and daily air-temperature ranges were used to identify climate-growth relationships. Trees from urban sites were found to be more sensitive to climate compared to trees in the surrounding hinterland. Ring width of the deciduous species, especially ash, beech, and oak, showed a high sensitivity to summer heat and drought at urban locations (summer signal), whereas conifer species were found suitable for the analysis of the urban heat island in late winter and early spring (winter signal).The summer and winter signals were strongest in tree-ring chronologies when the urban heat island intensities were based on an area of about 200 m to 3000 m centered over the tree locations, and thus reflect the urban climate at the scale of city quarters. For the summer signal, the sensitivity of deciduous tree species to climate increased with urbanity.These results indicate that urban trees can be used for climate response analyses and open new pathways to trace the evolution of urban climate change and more specifically the urban heat island, both in time and space.

scholarly journals Simultaneous assessment of the summer urban heat island in Moscow megacity based on in situ observations, thermal satellite images and mesoscale modeling

2019 ◽  
Vol 12 (4) ◽  
pp. 74-95 ◽  
Author(s):  
Mikhail I. Varentsov ◽  
Mikhail Y. Grishchenko ◽  
Hendrik Wouters
Keyword(s):  
Remote Sensing ◽  
Spatial Structure ◽  
Urban Heat Island ◽  
Air Temperature ◽  
Surface Air Temperature ◽  
Atmospheric Model ◽  
Heat Island ◽  
Near Surface ◽  
Urban Heat

This study compares three popular approaches to quantify the urban heat island (UHI) effect in Moscow megacity in a summer season (June-August 2015). The first approach uses the measurements of the near-surface air temperature obtained from weather stations, the second is based on remote sensing from thermal imagery of MODIS satellites, and the third is based on the numerical simulations with the mesoscale atmospheric model COSMO-CLM coupled with the urban canopy scheme TERRA_URB. The first approach allows studying the canopy-layer UHI (CLUHI, or anomaly of a near- surface air temperature), while the second allows studying the surface UHI (SUHI, or anomaly of a land surface temperature), and both types of the UHI could be simulated by the atmospheric model. These approaches were compared in the daytime, evening and nighttime conditions. The results of the study highlight a substantial difference between the SUHI and CLUHI in terms of the diurnal variation and spatial structure. The strongest differences are found at the daytime, at which the SUHI reaches the maximal intensity (up to 10°С) whereas the CLUHI reaches the minimum intensity (1.5°С). However, there is a stronger consistency between CLUHU and SUHI at night, when their intensities converge to 5–6°С. In addition, the nighttime CLUHI and SUHI have similar monocentric spatial structure with a temperature maximum in the city center. The presented findings should be taken into account when interpreting and comparing the results of UHI studies, based on the different approaches. The mesoscale model reproduces the CLUHI-SUHI relationships and provides good agreement with in situ observations on the CLUHI spatiotemporal variations (with near-zero biases for daytime and nighttime CLUHI intensity and correlation coefficients more than 0.8 for CLUHI spatial patterns). However, the agreement of the simulated SUHI with the remote sensing data is lower than agreement of the simulated CLUHI with in situ measurements. Specifically, the model tends to overestimate the daytime SUHI intensity. These results indicate a need for further in-depth investigation of the model behavior and SUHI–CLUHI relationships in general.

Sign in / Sign up

Export Citation Format

Share Document