scholarly journals Modeling Height–Diameter Relationships for Mixed-Species Plantations of Fraxinus mandshurica Rupr. and Larix olgensis Henry in Northeastern China

Forests ◽  
2020 ◽  
Vol 11 (6) ◽  
pp. 610 ◽  
Author(s):  
Longfei Xie ◽  
Faris Rafi Almay Widagdo ◽  
Lihu Dong ◽  
Fengri Li
Keyword(s):  
Model Validation ◽  
Native Species ◽  
Basal Area ◽  
Tree Height ◽  
Growth Period ◽  
Site Quality ◽  
Larix Olgensis ◽  
Fraxinus Mandshurica ◽  
Mixed Species ◽  
Larix Olgensis Henry

The mixture of tree species has gradually become the focus of forest research, especially native species mixing. Mixed-species plantations of Manchurian ash (Fraxinus mandshurica Rupr.) and Changbai larch (Larix olgensis Henry) have successfully been cultivated in Northeast China. Height–diameter (H–D) models were found to be effective in designing the silvicultural planning for mixed-species plantations. Thus, this study aimed to develop a new system of H–D models for juvenile ash and larch mixed-species plantations, based on competition information and tree and stand attributes. The leave-one-out cross-validation was utilized for model validation. The result showed that the H–D relationship was affected not only by the tree attributes (i.e., tree size and competition information) but also by stand characteristics, such as site quality and species proportion of basal area. The best model explained more than 80% and 85% variation of the tree height of ash and larch, respectively. Moreover, model validation also confirmed the high accuracy of the newly developed model’s predictions. We also found that, in terms of total tree height, ash in middle rows were higher than those in side rows, while larch in the middle rows were higher in the early growth period but then became lower than those in the side rows, as the diameter increased. The newly established H–D models would be useful for forestry inventory practice and have the potential to aid decisions in mixed-species plantations of ash and larch.

scholarly journals Evaluating and modeling variation in site-level maximum carrying capacity of mixed-species forest stands in the Acadian Region of northeastern North America

2019 ◽  
Vol 95 (03) ◽  
pp. 171-182 ◽  
Author(s):  
Aaron R. Weiskittel ◽  
Christian Kuehne
Keyword(s):  
North America ◽  
Prediction Model ◽  
Carrying Capacity ◽  
Stand Structure ◽  
Regional Scale ◽  
Basal Area ◽  
Climatic Variables ◽  
Site Quality ◽  
Forest Stands ◽  
Mixed Species

Currently no universal approach exists to estimate regional site-level maximum carrying capacity in terms of stand densityindex (SDIMAX) of mixed species stands across contrasting forest ecosystems. Regional research efforts that account forinfluential stand-level variables and species traits are needed to reliably derive SDIMAX under varying environmental conditions and stand characteristics. This study used regionally comprehensive forest inventory data from various permanentsampling efforts to evaluate the effects of contrasting biotic and abiotic stand- and site-level factors on SDIMAX of multiple-species, structurally heterogeneous stands of the climatically diverse Acadian Forest Region of North America. Specifically,we aimed to i) quantify the stand-level maximum size-density line for an array of forest stands found across the study area,irrespective of stand structure; ii) evaluate the relationship between this stand-specific estimate of SDIMAX and various other stand-level attributes; and, iii) develop a generalized SDIMAX prediction model using SDIMAX estimates from objective i) aswell as potential regional drivers of SDIMAX from objective ii). The most influential stand-level factors on SDIMAX were proportion of total stand basal area in hardwood species, basal area weighted mean specific gravity, range in stem diameter, andspecies diversity. Direct climatic variables were not included in our SDIMAX prediction model due to the limited variationexplained, but relationships with elevation and a site quality index based on these climatic variables were. Overall, we con-clude that i) variation in SDIMAX appears to be mostly driven by the softwood to hardwood ratio of the mixed species,structurally complex stands evaluated in our study and ii) the general approach offers a viable framework for estimating sitemaximum carrying capacity at a regional-scale and effectively managing stand density accordingly.

Restore and sequester: estimating biomass in native Australian woodland ecosystems for their carbon-funded restoration

2011 ◽  
Vol 59 (7) ◽  
pp. 640 ◽  
Author(s):  
J. H. Jonson ◽  
D. Freudenberger
Keyword(s):  
Native Species ◽  
Basal Area ◽  
Tree Height ◽  
Ground Level ◽  
Stem Diameter ◽  
Allometric Equations ◽  
Total Biomass ◽  
Tree Biomass ◽  
Below Ground ◽  
Total Tree

In the south-western region of Australia, allometric relationships between tree dimensional measurements and total tree biomass were developed for estimating carbon sequestered in native eucalypt woodlands. A total of 71 trees representing eight local native species from three genera were destructively sampled. Within this sample set, below ground measurements were included for 51 trees, enabling the development of allometric equations for total biomass applicable to small, medium, and large native trees. A diversity of tree dimensions were recorded and regressed against biomass, including stem diameter at 130 cm (DBH), stem diameter at ground level, stem diameter at 10 cm, stem diameter at 30 cm, total tree height, height of canopy break and mean canopy diameter. DBH was consistently highly correlated with above ground, below ground and total biomass. However, measurements of stem diameters at 0, 10 and 30 cm, and mean canopy diameter often displayed equivalent and at times greater correlation with tree biomass. Multi-species allometric equations were also developed, including ‘Mallee growth form’ and ‘all-eucalypt’ regressions. These equations were then applied to field inventory data collected from three locally dominant woodland types and eucalypt dominated environmental plantings to create robust relationships between biomass and stand basal area. This study contributes the predictive equations required to accurately quantify the carbon sequestered in native woodland ecosystems in the low rainfall region of south-western Australia.

Site Quality, Disturbance, and Vegetation Effects on Carbon Storage and Accumulation in Old, Mixed-Species Stands in Central Maine, USA

2019 ◽  
Vol 39 (4) ◽  
pp. 429 ◽  
Author(s):  
Joshua J. Puhlick ◽  
Shawn Fraver ◽  
Ivan J. Fernandez ◽  
Aaron Teets ◽  
Aaron R. Weiskittel ◽  
...  
Keyword(s):  
Carbon Storage ◽  
Site Quality ◽  
Mixed Species ◽  
Vegetation Effects

scholarly journals A Dynamic Stand Growth Model System for Loblolly Pine Responding to Mid-Rotation Treatments

Forests ◽  
2021 ◽  
Vol 12 (5) ◽  
pp. 556
Author(s):  
Mauricio Zapata-Cuartas ◽  
Bronson P. Bullock ◽  
Cristian R. Montes ◽  
Michael B. Kane
Keyword(s):  
Growth Model ◽  
Loblolly Pine ◽  
Basal Area ◽  
Model System ◽  
Growth And Yield ◽  
Site Quality ◽  
Response To Treatment ◽  
Plantation Management ◽  
Vegetation Control ◽  
Dominant Height

Intensive loblolly pine (Pinus taeda L.) plantation management in the southeastern United States includes mid-rotation silvicultural practices (MRSP) like thinning, fertilization, competitive vegetation control, and their combinations. Consistent and well-designed long-term studies considering interactions of MRSP are required to produce accurate projections and evaluate management decisions. Here we use longitudinal data from the regional Mid-Rotation Treatment study established by the Plantation Management Research Cooperative (PMRC) at the University of Georgia across the southeast U.S. to fit and validate a new dynamic model system rooted in theoretical and biological principles. A Weibull pdf was used as a modifier function coupled with the basal area growth model. The growth model system and error projection functions were estimated simultaneously. The new formulation results in a compatible and consistent growth and yield system and provides temporal responses to treatment. The results indicated that the model projections reproduce the observed behavior of stand characteristics. The model has high predictive accuracy (the cross-validation variance explained was 96.2%, 99.7%, and 98.6%; and the prediction root mean square distance was 0.704 m, 19.1 trees ha−1, and 1.03 m2ha−1 for dominant height (DH), trees per hectare (N), and basal area (BA), respectively), and can be used to project the current stand attributes following combinations of MRSP and with different thinning intensities. Simulations across southern physiographic regions allow us to conclude that the most overall ranking of MRSP after thinning is fertilization + competitive vegetation control (Fert + CVC) > fertilization only (Fert) > competitive vegetation control only (CVC), and Fert + CVC show less than additive effect. Because of the model structure, the response to treatment changes with location, age of application, and dominant height growth as indicators of site quality. Therefore, the proposed model adequately represents regional growth conditions.

scholarly journals Deriving Tree Size Distributions of Tropical Forests from Lidar

2021 ◽  
Vol 13 (1) ◽  
pp. 131
Author(s):  
Franziska Taubert ◽  
Rico Fischer ◽  
Nikolai Knapp ◽  
Andreas Huth
Keyword(s):  
Size Distribution ◽  
Spatial Scales ◽  
Basal Area ◽  
Tree Height ◽  
Tree Size ◽  
Diameter Distribution ◽  
Forest Inventories ◽  
Allometric Relations ◽  
Lidar Measurements ◽  
Derived Data

Remote sensing is an important tool to monitor forests to rapidly detect changes due to global change and other threats. Here, we present a novel methodology to infer the tree size distribution from light detection and ranging (lidar) measurements. Our approach is based on a theoretical leaf–tree matrix derived from allometric relations of trees. Using the leaf–tree matrix, we compute the tree size distribution that fit to the observed leaf area density profile via lidar. To validate our approach, we analyzed the stem diameter distribution of a tropical forest in Panama and compared lidar-derived data with data from forest inventories at different spatial scales (0.04 ha to 50 ha). Our estimates had a high accuracy at scales above 1 ha (1 ha: root mean square error (RMSE) 67.6 trees ha−1/normalized RMSE 18.8%/R² 0.76; 50 ha: 22.8 trees ha−1/6.2%/0.89). Estimates for smaller scales (1-ha to 0.04-ha) were reliably for forests with low height, dense canopy or low tree height heterogeneity. Estimates for the basal area were accurate at the 1-ha scale (RMSE 4.7 tree ha−1, bias 0.8 m² ha−1) but less accurate at smaller scales. Our methodology, further tested at additional sites, provides a useful approach to determine the tree size distribution of forests by integrating information on tree allometries.

scholarly journals Adjudicating Perspectives on Forest Structure: How Do Airborne, Terrestrial, and Mobile Lidar-Derived Estimates Compare?

2021 ◽  
Vol 13 (12) ◽  
pp. 2297
Author(s):  
Jonathon J. Donager ◽  
Andrew J. Sánchez Meador ◽  
Ryan C. Blackburn
Keyword(s):  
Ponderosa Pine ◽  
Laser Scanning ◽  
Canopy Cover ◽  
Basal Area ◽  
Tree Height ◽  
Absolute Error ◽  
Forest Monitoring ◽  
Individual Tree ◽  
Structural Configurations ◽  
Individual Trees

Applications of lidar in ecosystem conservation and management continue to expand as technology has rapidly evolved. An accounting of relative accuracy and errors among lidar platforms within a range of forest types and structural configurations was needed. Within a ponderosa pine forest in northern Arizona, we compare vegetation attributes at the tree-, plot-, and stand-scales derived from three lidar platforms: fixed-wing airborne (ALS), fixed-location terrestrial (TLS), and hand-held mobile laser scanning (MLS). We present a methodology to segment individual trees from TLS and MLS datasets, incorporating eigen-value and density metrics to locate trees, then assigning point returns to trees using a graph-theory shortest-path approach. Overall, we found MLS consistently provided more accurate structural metrics at the tree- (e.g., mean absolute error for DBH in cm was 4.8, 5.0, and 9.1 for MLS, TLS and ALS, respectively) and plot-scale (e.g., R2 for field observed and lidar-derived basal area, m2 ha−1, was 0.986, 0.974, and 0.851 for MLS, TLS, and ALS, respectively) as compared to ALS and TLS. While TLS data produced estimates similar to MLS, attributes derived from TLS often underpredicted structural values due to occlusion. Additionally, ALS data provided accurate estimates of tree height for larger trees, yet consistently missed and underpredicted small trees (≤35 cm). MLS produced accurate estimates of canopy cover and landscape metrics up to 50 m from plot center. TLS tended to underpredict both canopy cover and patch metrics with constant bias due to occlusion. Taking full advantage of minimal occlusion effects, MLS data consistently provided the best individual tree and plot-based metrics, with ALS providing the best estimates for volume, biomass, and canopy cover. Overall, we found MLS data logistically simple, quickly acquirable, and accurate for small area inventories, assessments, and monitoring activities. We suggest further work exploring the active use of MLS for forest monitoring and inventory.

scholarly journals Growth and yield of teak stands at different spacing

2018 ◽  
Vol 53 (10) ◽  
pp. 1109-1118
Author(s):  
Reginaldo Antonio Medeiros ◽  
Haroldo Nogueira de Paiva ◽  
Flávio Siqueira D’Ávila ◽  
Helio Garcia Leite
Keyword(s):  
Growth Rate ◽  
Basal Area ◽  
Tree Height ◽  
Tectona Grandis ◽  
Growth And Yield ◽  
Mean Square ◽  
Randomized Design ◽  
Completely Randomized Design ◽  
Total Tree

Abstract: The objective of this work was to evaluate the growth and yield of teak (Tectona grandis) stands at different spacing and in different soil classes. Twelve spacing were evaluated in an Inceptisol and Oxisol, in plots with an area of 1,505 or 1,548 m2, arranged in a completely randomized design with nine replicates. The teak trees were measured at 26, 42, 50, and 78 months of age. Total tree height was less affected by spacing. Mean square diameter was greater in wider spacing, whereas basal area and total volume with bark were greater in closer spacing. An increase in volume with bark per tree was observed with the increase of useful area per plant. For teak trees, growth stagnation happens earlier, the growth rate is higher in closer spacing, and the plants grow more in the Inceptisol than in the Oxisol.

scholarly journals Spatial and Seasonal Variations of Standardized Photosynthetic Parameters under Different Environmental Conditions for Young Planted Larix olgensis Henry Trees

Forests ◽  
2018 ◽  
Vol 9 (9) ◽  
pp. 522 ◽  
Author(s):  
Qiang Liu ◽  
Fengri Li
Keyword(s):  
Environmental Conditions ◽  
Seasonal Variations ◽  
Seasonal Pattern ◽  
Repeated Measurements ◽  
Seasonal Patterns ◽  
Photosynthetic Parameters ◽  
Relative Depth ◽  
Larix Olgensis ◽  
Vertical Variations ◽  
Larix Olgensis Henry

Understanding the spatial and seasonal variations in leaf physiology is critical for accurately modeling the carbon uptake, physiological processes and growth of entire canopies and stands. For a 17-year-old Larix olgensis Henry plantation, vertical whorl-by-whorl sampling and analyses of seasonally repeated measurements of major photosynthetic parameters were conducted, and the correlations between photosynthetic parameters and environmental conditions, leaf morphological traits and spatial position within the crown were analyzed. According to the correlations, the photosynthetic parameters were standardized based on the environmental conditions to avoid the influence of the changing environment on the patterns of spatial and seasonal variations of photosynthetic parameters. The results showed that the standardized light-saturated net photosynthetic rate (SPmax), standardized dark respiration (SRd) and standardized stomatal conductance under saturated light (Sgs-sat) were all negatively related to the relative depth into the crown (RDINC) throughout the growing season. However, their vertical patterns were different during the development of the phenological phase. In addition, different gradients of environmental conditions also influenced the values and the range of the vertical variation in photosynthesis. High temperature and low humidity usually resulted in smaller values and weaker vertical variations of SPmax and Sgs-sat, but larger values and more obvious vertical variations in SRd. SPmax and Sgs-sat usually exhibited a parabolic seasonal pattern in different vertical positions within the crown; however, SRd generally followed a concave pattern. These seasonal patterns were all weaker with increasing RDINC. Different environments also exhibited a significant influence on the seasonal patterns of photosynthesis. We suggested that standardization is necessary before analyzing spatial and seasonal variations. A single environmental condition could not represent the spatial and seasonal patterns under all gradients of the environment. Spatial and seasonal variations should be simultaneously analyzed because they are related to each other.

scholarly journals Stand Structure and Composition 32 Years after Precommercial Thinning Treatments in a Mixed Northern Conifer Stand in Central Maine

2011 ◽  
Vol 28 (2) ◽  
pp. 92-96 ◽  
Author(s):  
Aaron R. Weiskittel ◽  
Laura S. Kenefic ◽  
Rongxia Li ◽  
John Brissette
Keyword(s):  
Stand Structure ◽  
Abies Balsamea ◽  
Basal Area ◽  
Long Term Effects ◽  
Mixed Species ◽  
Precommercial Thinning ◽  
Large Trees ◽  
Stand Attributes ◽  
And Control

Abstract The effects of four precommercial thinning (PCT) treatments on an even-aged northern conifer stand in Maine were investigated by examining stand structure and composition 32 years after treatment. Replicated treatments applied in 1976 included: (1) control (no PCT), (2) row thinning (rowthin; 5-ft-wide row removal with 3-ft-wide residual strips), (3) row thinning with crop tree release (rowthin+CTR; 5-ft-wide row removal with crop tree release at 8-ft intervals in 3-ft-wide residual strips), and (4) crop tree release (CTR; release of selected crop trees at 8×8-ft intervals). PCT plots had more large trees and fewer small trees than the control in 2008. There were no other significant differences between the rowthin and control. The rowthin+CTR and CTR treatments had lower total and hardwood basal area (BA) and higher merchantable conifer BA than the control. CTR also resulted in more red spruce (Picea rubens [Sarg.]) and less balsam fir (Abies balsamea [L.]) than the other treatments. Although stand structures for rowthin+CTR and CTR were similar, the percentage of spruce in CTR was greater. Although the less-intensive rowthin+CTR treatment may provide many of the same benefits as CTR, the latter would be the preferred treatment if increasing the spruce component of a stand is an objective. Overall, early thinning treatments were found to have long-term effects on key stand attributes, even more than 30 years after treatment in areas with mixed species composition and moderate site potential.

Sign in / Sign up

Export Citation Format

Share Document