scholarly journals Penetration Resistance of Laacher See-tephra Andosols—Evaluating Rooting Conditions of Undisturbed and Excavated Forest Soils in SW-Germany

Forests ◽  
2020 ◽  
Vol 11 (3) ◽  
pp. 360
Author(s):  
Julian J. Zemke ◽  
Ulli Bange ◽  
John Dellen ◽  
Ines Groh ◽  
Roxane C. A. Henn ◽  
...  

This study discusses penetration resistance (PR) of forested Pumice-Andosol sites. PR, a key soil property influencing root growth and elongation, exerts a substantial influence on ecological site quality and tree growth. Andosols were expected to show low PR because of their unique characteristics (low bulk density, loose soil matrix). Five sites, two undisturbed and three backfilled, were sampled. The latter result from pumice excavation and were examined to quantify potential PR alterations in the aftermath of backfilling and pumice removal. Penetrologger sampling on undisturbed sites showed mean PR not exceeding 3 MPa, a literature-based, critical threshold restricting root growth, in the upper 0.80 m, indicating conditions fostering tree rooting. Backfilled sites mostly exhibited increased (> 3 MPa) PR, leading to rooting restrictions even beginning at −0.21 m. Deviations from undisturbed soils range from −15.6 to +109.3% depending on depth and age of the backfilled site. Furthermore, GIS-based data interpolation helped to identify spatial PR patterns and allowed a direct comparison before/after backfilling at one site. Statistical analysis revealed significantly altered PR after backfilling, while a concluding ANOVA provided at least significant governing factors (depth, area, clay + silt content, soil organic matter), albeit with only small effect sizes.

2013 ◽  
Vol 59 (No. 7) ◽  
pp. 295-302 ◽  
Author(s):  
B. Ji ◽  
Y. Zhao ◽  
X. Mu ◽  
K. Liu ◽  
C. Li

Subsoil compaction can result in unfavourable soil physical conditions and hinder the root growth of maize. The effects of deep tillage and conventional tillage on soil physical properties and root growth of maize were studied during 2010–2011 at two sites (loam at Hebi and clay at Luohe) in central China. The results showed that soil penetration resistance, bulk density, water content and root length density were significantly affected by tillage, soil depth and year. Deep tillage had lower penetration resistance and lower soil bulk density, but higher soil water content than conventional tillage across years and depths. Averaged over the whole soil profile, deep tillage not only significantly decreased penetration resistance and soil bulk density, but significantly increased soil water content and root length density on loam, while deep tillage only significantly increased the root length density on clay. We conclude that deep tillage on the loam is more suitable for the root growth of summer maize.


2021 ◽  
Author(s):  
Giorgio Capello ◽  
Marcella Biddoccu ◽  
Simone Di Prima ◽  
Laurent Lassabatere

<p>Adopting integrated measurement techniques may enhance our understanding of hydropedological processes within the critical zone. To investigate lateral subsurface flow due to lithological discontinuities, a ponding infiltration test, two GPR surveys, and soil penetration resistance (PR) measurements were conducted on a 1 m<sup>2</sup> plot in a vegetated area located in the university campus of Doua (Lyon, France). A GPR grid with 0.2 m intervals was established. In the center of the grid, around the root system of a hawthorn shrub, an infiltration test was conducted using an automated single-ring infiltrometer proposed by Concialdi et al. (2020), to infiltrate a shear-thinning viscous solution (1 g L<sup>−1</sup> Xanthan gum powder). The viscous solution was expected to fill preferential pathways due to the roots, with limited infiltration into the soil matrix, and thus reveal complex geometries or macropore networks in highly heterogeneous soils. To create three-dimensional (3D) representations of the infiltrated solution, two GPR surveys were carried out just before and 20 min after the infiltration test, using a GSSI (Geophysical Survey System Inc., Salem, NH) SIR 3000 system with a 900 MHz antenna. A total of 24 radargrams were collected in time mode by moving the antenna along the survey lines and recording the markers position along the survey line intersections. After the second GPR survey, PR was measured at each of the 36 intersection points of the grid using an electronic hand-pushed cone penetrometer. The cone had a 30° angle and a base area of 1 cm<sup>2</sup>, inserted into the soil at a constant speed of 2 cm s<sup>−1</sup> to a depth of 0.8 m. These measurements were aimed to highlight contrasting penetration resistance characteristics between different soil horizons. We also determined the soil bulk density from 24 undisturbed soil cores (~ 100 cm<sup>3</sup>) collected at different depths from 0 to 50 cm. Finally, an auger was used to extract a 0.69-m-depth soil core for the direct observation of lithological heterogeneities.</p><p>Differenced radargrams from pre- and post-infiltration surveys allowed to detect the 3D infiltration bulb, which was vertically elongated and irregularly shaped, but with an evident horizontal divergence between the depth of 20 and 30 cm. Below 30 cm depth, a significant increasing of soil PR and BD (respectively higher than 2.5 MPa and 1.50 g cm<sup>-3</sup>, between 30 and 50 cm depth) was detected, indicating the presence of a underlying layer, which was also identifiable by visual observation of the soil core. This dense layer impeded water flow. Consequently, the liquid solution partially diverged laterally and accumulated upside this layer, and partially infiltrated into the dense layer along preferential flow paths in correspondence with the plant root system, as detected by the 3D GPR diagram. Summing up and considering every aspect, this study allowed to identify water perching above a shallow restrictive layer for a better understanding of the water dynamics of the investigated soil. This study shows the benefits to couple different types of soil physics approaches to relate hydrological processes to the soil hydraulic and mechanical properties.</p>


2015 ◽  
Vol 29 (4) ◽  
pp. 441-447 ◽  
Author(s):  
Michel Keisuke Sato ◽  
Herdjania Veras de Lima ◽  
Pedro Daniel de Oliveira ◽  
Sueli Rodrigues

Abstract The aim of this study was to evaluate the critical soil bulk density from the soil penetration resistance measurements for soybean root growth in Brazilian Amazon Oxisols. The experiment was carried out in a greenhouse using disturbed soil samples collected from the northwest of Para characterized by different texture. The treatments consisted of a range of soil bulk densities for each soil textural class. Three pots were used for soybean growth of and two for the soil penetration resistance curve. From the fitted model, the critical soil bulk density was determined considering the penetration resistance values of 2 and 3 MPa. After sixty days, plants were cut and root length, dry mass of root, and dry mass of shoots were determined. At higher bulk densities, the increase in soil water content decreased the penetration resistance, allowing unrestricted growth of soybean roots. Regardless of soil texture, the penetration resistance of 2 and 3 MPa had a slight effect on root growth in soil moisture at field capacity and a reduction of 50% in the soybean root growth was achieved at critical soil bulk density of 1.82, 1.75, 1.51, and 1.45 Mg m-3 for the sandy loam, sandy clay loam, clayey, and very clayey soil.


1988 ◽  
Vol 161 (3) ◽  
pp. 195-206 ◽  
Author(s):  
S. J. Grecu ◽  
M. B. Kirkham ◽  
E. T. Kanemasu ◽  
D. W. Sweeney ◽  
L. R. Stone ◽  
...  

2020 ◽  
Vol 1 (1) ◽  
pp. 21
Author(s):  
Danner Sagala ◽  
Eka Suzanna ◽  
Prihanani Prihanani

Aluminum is prevalent in soils of tidal swamps. Soybean is known to be very sensitive to aluminum stress and so when tidal swamps are converted to soybean cropland, considerable effort and expense are required to overcome Al toxicity in soybean roots. It is therefore necessary to determine at what time in early development soybeans can best endure aluminum stress and identify aluminum-tolerant cultivars. This study was conducted by testing the impact of aluminum exposure on three soybean cultivars (Tanggamus, Karasumame, and M652) (relative to no-exposure controls) at four time periods at 10, 20, and 30 days after planting. No significant effect of aluminum on root growth in the first five days after exposure was observed, but the toxic effects became evident after soybeans had been exposed to aluminum for 10 days. Soybean seedlings that experienced aluminum stress earliest (at 10 days after planting) were more negatively impacted by Al exposure than seedlings exposed later (e.g., 30 days after planting). Root growths of the three cultivars we tested in this study were all detrimentally impacted by aluminum exposure. However, the M652 cultivar was the most sensitive to aluminum exposure. We conclude that the critical threshold period for soybean root growth to succumb to aluminum stress is within the first 30 days after planting, whereas the tolerance to aluminum stress occurs only during the first 10 days of exposure.


Soil Research ◽  
1991 ◽  
Vol 29 (3) ◽  
pp. 425 ◽  
Author(s):  
PJ Hulme ◽  
DC Mckenzie ◽  
TS Abbott ◽  
DA Macleod

Structural degradation of Vertisols depresses cotton lint yield by extending the period of waterlogging following irrigation or heavy rainfall. Break crops such as wheat and safflower are often grown without irrigation to improve the macroporosity of degraded Vertisols, by encouraging deep cracking, after several years of cotton production. Investigations were made into the effects of cultivated fallow, wheat and safflower on soil structure, and the growth of a subsequent cotton crop. The tests reported in this paper, done over a 12-day period following irrigation, were: soil water content and potential, core and clod bulk density, air-filled porosity, an index of macropore continuity using Rhodamine dye, and penetration resistance. The results, when compared with established limits of aeration and penetration resistance to cotton root growth, indicate that soil physical conditions at 0.25 m should have impeded root growth regardless of water content. However, cotton roots continued to extract water in this hostile soil environment; this favourable performance was attributed to the better conditions for root growth in the interaggregate fissures than those within aggregates. Apart from water content, all indicators of soil structure were able to differentiate consistently between the three crop treatments to a depth of 0.25 m. Below 0.8m, the cropped plots, particularly safflower, had lower water contents than the fallow plots.


Sign in / Sign up

Export Citation Format

Share Document