scholarly journals Modeling of Aboveground Biomass with Landsat 8 OLI and Machine Learning in Temperate Forests

Forests ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 11
Author(s):  
Pablito M. López-Serrano ◽  
José Luis Cárdenas Domínguez ◽  
José Javier Corral-Rivas ◽  
Enrique Jiménez ◽  
Carlos A. López-Sánchez ◽  
...  
Keyword(s):  
Machine Learning ◽  
Aboveground Biomass ◽  
Goodness Of Fit ◽  
Accurate Estimation ◽  
Support Vector ◽  
Landsat 8 ◽  
Sensing Applications ◽  
Learning Techniques ◽  
Physical Variables ◽  
Selection Of

An accurate estimation of forests’ aboveground biomass (AGB) is required because of its relevance to the carbon cycle, and because of its economic and ecological importance. The selection of appropriate variables from satellite information and physical variables is important for precise AGB prediction mapping. Because of the complex relationships for AGB prediction, non-parametric machine-learning techniques represent potentially useful techniques for AGB estimation, but their use and comparison in forest remote-sensing applications is still relatively limited. The objective of the present study was to evaluate the performance of automatic learning techniques, support vector regression (SVR) and random forest (RF), to predict the observed AGB (from 318 permanent sampling plots) from the Landsat 8 Landsat 8 Operational Land Imager (OLI) sensor, spectral indexes, texture indexes and physical variables the Sierra Madre Occidental in Mexico. The result showed that the best SVR model explained 80% of the total variance (root mean square error (RMSE) = 8.20 Mg ha−1). The variables that best predicted AGB, in order of importance, were the bands that belong to the region of red and near and middle infrared, and the average temperature. The results show that the SVR technique has a good potential for the estimation of the AGB and that the selection of the model hyperparameters has important implications for optimizing the goodness of fit.

scholarly journals A COMPARISON OF MACHINE-LEARNING REGRESSION ALGORITHMS FOR THE ESTIMATION OF LAI USING LANDSAT - 8 SATELLITE DATA

2019 ◽  
Vol XLII-4/W16 ◽  
pp. 679-683
Author(s):  
V. P. Yadav ◽  
R. Prasad ◽  
R. Bala ◽  
A. K. Vishwakarma ◽  
S. A. Yadav ◽  
...  
Keyword(s):  
Machine Learning ◽  
Satellite Data ◽  
Vegetation Index ◽  
Learning Algorithms ◽  
Machine Learning Algorithms ◽  
Accurate Estimation ◽  
Support Vector ◽  
Landsat 8 ◽  
Area Index ◽  
Global Circulation Models

Abstract. The leaf area index (LAI) is one of key variable of crops which plays important role in agriculture, ecology and climate change for global circulation models to compute energy and water fluxes. In the recent research era, the machine-learning algorithms have provided accurate computational approaches for the estimation of crops biophysical parameters using remotely sensed data. The three machine-learning algorithms, random forest regression (RFR), support vector regression (SVR) and artificial neural network regression (ANNR) were used to estimate the LAI for crops in the present study. The three different dates of Landsat-8 satellite images were used during January 2017 – March 2017 at different crops growth conditions in Varanasi district, India. The sampling regions were fully covered by major Rabi season crops like wheat, barley and mustard etc. In total pooled data, 60% samples were taken for the training of the algorithms and rest 40% samples were taken as testing and validation of the machinelearning regressions algorithms. The highest sensitivity of normalized difference vegetation index (NDVI) with LAI was found using RFR algorithms (R2 = 0.884, RMSE = 0.404) as compared to SVR (R2 = 0.847, RMSE = 0.478) and ANNR (R2 = 0.829, RMSE = 0.404). Therefore, RFR algorithms can be used for accurate estimation of LAI for crops using satellite data.

scholarly journals Machine Learning Approaches for Outdoor Air Quality Modelling: A Systematic Review

2018 ◽  
Vol 8 (12) ◽  
pp. 2570 ◽  
Author(s):  
Yves Rybarczyk ◽  
Rasa Zalakeviciute
Keyword(s):  
Machine Learning ◽  
Systematic Review ◽  
Machine Learning Techniques ◽  
Support Vector ◽  
Learning Approaches ◽  
Deterministic Models ◽  
Learning Techniques ◽  
Vector Machines ◽  
Estimation Problems ◽  
Selection Of

Current studies show that traditional deterministic models tend to struggle to capture the non-linear relationship between the concentration of air pollutants and their sources of emission and dispersion. To tackle such a limitation, the most promising approach is to use statistical models based on machine learning techniques. Nevertheless, it is puzzling why a certain algorithm is chosen over another for a given task. This systematic review intends to clarify this question by providing the reader with a comprehensive description of the principles underlying these algorithms and how they are applied to enhance prediction accuracy. A rigorous search that conforms to the PRISMA guideline is performed and results in the selection of the 46 most relevant journal papers in the area. Through a factorial analysis method these studies are synthetized and linked to each other. The main findings of this literature review show that: (i) machine learning is mainly applied in Eurasian and North American continents and (ii) estimation problems tend to implement Ensemble Learning and Regressions, whereas forecasting make use of Neural Networks and Support Vector Machines. The next challenges of this approach are to improve the prediction of pollution peaks and contaminants recently put in the spotlights (e.g., nanoparticles).

Machine learning to estimate surface roughness from satellite images

2021 ◽  
Author(s):  
Abhilash Singh ◽  
Kumar Gaurav
Keyword(s):  
Machine Learning ◽  
Surface Roughness ◽  
Ensemble Learning ◽  
Satellite Images ◽  
Surface Soil ◽  
Information Criterion ◽  
Machine Learning Techniques ◽  
Support Vector ◽  
Landsat 8 ◽  
Learning Techniques

<p>Soil surface attributes (mainly surface roughness and soil moisture) play a critical role in land-atmosphere interaction and have several applications in agriculture, hydrology, meteorology, and climate change studies. This study explores the potential of different machine learning algorithms (Support Vector Regression (SVR), Gaussian Process Regression (GPR), Generalised Regression Neural Network (GRNN), Binary Decision Tree (BDT), Bragging Ensemble Learning, and Boosting Ensemble Learning) to estimate the surface soil roughness from Synthetic Aperture Radar (SAR) and optical satellite images in an alluvial megafan of the Kosi River in northern India. In a field campaign during 10-21 December 2019, we measured the surface soil roughness at 78 different locations using a mechanical pin-meter. The average value of the in-situ surface roughness is 1.8 cm. Further, at these locations, we extract the multiple features (backscattering coefficients, incidence angle, Normalised Difference Vegetation Index, and surface elevation) from Sentinel-1 A/B, LANDSAT-8 and SRTM data. We then trained and evaluated (in 60:40 ratio) the performance of all the regression-based machine learning techniques. </p><p>We found that SVR method performs exceptionally well over other methods with (R= 0.74, RMSE=0.16 cm, and MSE=0.025 cm<sup>2</sup>). To ensure a fair selection of machine learning techniques, we have calculated some additional criteria that include Akaike’s Information Criterion (AIC), corrected AIC and Bayesian Information Criterion (BIC). On comparing, we observed that SVR exhibits the lowest values of AIC, corrected AIC and BIC amongst all other methods, indicating best goodness-of-fit.</p>

Using Machine Learning Algorithms on Prediction of Stock Price

2020 ◽  
Vol 12 (2) ◽  
pp. 84-99
Author(s):  
Li-Pang Chen
Keyword(s):  
Machine Learning ◽  
Stock Price ◽  
Short Term Memory ◽  
Machine Learning Algorithms ◽  
Machine Learning Techniques ◽  
Support Vector ◽  
Short Term ◽  
Learning Techniques ◽  
Historical Database ◽  
Long Short Term Memory

In this paper, we investigate analysis and prediction of the time-dependent data. We focus our attention on four different stocks are selected from Yahoo Finance historical database. To build up models and predict the future stock price, we consider three different machine learning techniques including Long Short-Term Memory (LSTM), Convolutional Neural Networks (CNN) and Support Vector Regression (SVR). By treating close price, open price, daily low, daily high, adjusted close price, and volume of trades as predictors in machine learning methods, it can be shown that the prediction accuracy is improved.

A Comparative Study of Different Machine Learning Algorithms for Disease Prediction

2017 ◽  
Vol 7 (7) ◽  
pp. 172
Author(s):  
Anantvir Singh Romana
Keyword(s):  
Machine Learning ◽  
Subsequent Treatment ◽  
Machine Learning Algorithms ◽  
Machine Learning Techniques ◽  
Support Vector ◽  
Disease Prediction ◽  
Classification Problems ◽  
Learning Techniques ◽  
Neural Network Classifiers ◽  
Diagnostic Detection

Accurate diagnostic detection of the disease in a patient is critical and may alter the subsequent treatment and increase the chances of survival rate. Machine learning techniques have been instrumental in disease detection and are currently being used in various classification problems due to their accurate prediction performance. Various techniques may provide different desired accuracies and it is therefore imperative to use the most suitable method which provides the best desired results. This research seeks to provide comparative analysis of Support Vector Machine, Naïve bayes, J48 Decision Tree and neural network classifiers breast cancer and diabetes datsets.

scholarly journals Predictive modeling for peri-implantitis by using machine learning techniques

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Tomoaki Mameno ◽  
Masahiro Wada ◽  
Kazunori Nozaki ◽  
Toshihito Takahashi ◽  
Yoshitaka Tsujioka ◽  
...  
Keyword(s):  
Machine Learning ◽  
Demographic Data ◽  
Risk Indicators ◽  
Machine Learning Techniques ◽  
Support Vector ◽  
Machine Learning Methods ◽  
Complex Interactions ◽  
Learning Techniques ◽  
Increased Risk ◽  
Vector Machines

AbstractThe purpose of this retrospective cohort study was to create a model for predicting the onset of peri-implantitis by using machine learning methods and to clarify interactions between risk indicators. This study evaluated 254 implants, 127 with and 127 without peri-implantitis, from among 1408 implants with at least 4 years in function. Demographic data and parameters known to be risk factors for the development of peri-implantitis were analyzed with three models: logistic regression, support vector machines, and random forests (RF). As the results, RF had the highest performance in predicting the onset of peri-implantitis (AUC: 0.71, accuracy: 0.70, precision: 0.72, recall: 0.66, and f1-score: 0.69). The factor that had the most influence on prediction was implant functional time, followed by oral hygiene. In addition, PCR of more than 50% to 60%, smoking more than 3 cigarettes/day, KMW less than 2 mm, and the presence of less than two occlusal supports tended to be associated with an increased risk of peri-implantitis. Moreover, these risk indicators were not independent and had complex effects on each other. The results of this study suggest that peri-implantitis onset was predicted in 70% of cases, by RF which allows consideration of nonlinear relational data with complex interactions.

Utilizing Data-Driven Models to Predict Brittleness in Tuscaloosa Marine Shale: A Machine Learning Approach

2021 ◽  
Author(s):  
Jamal Ahmadov
Keyword(s):  
Machine Learning ◽  
Random Forest ◽  
Brittleness Index ◽  
Estimation Methods ◽  
Gradient Boosting ◽  
Average Error ◽  
Support Vector ◽  
Marine Shale ◽  
Effective Manner ◽  
Selection Of

Abstract The Tuscaloosa Marine Shale (TMS) formation is a clay- and liquid-rich emerging shale play across central Louisiana and southwest Mississippi with recoverable resources of 1.5 billion barrels of oil and 4.6 trillion cubic feet of gas. The formation poses numerous challenges due to its high average clay content (50 wt%) and rapidly changing mineralogy, making the selection of fracturing candidates a difficult task. While brittleness plays an important role in screening potential intervals for hydraulic fracturing, typical brittleness estimation methods require the use of geomechanical and mineralogical properties from costly laboratory tests. Machine Learning (ML) can be employed to generate synthetic brittleness logs and therefore, may serve as an inexpensive and fast alternative to the current techniques. In this paper, we propose the use of machine learning to predict the brittleness index of Tuscaloosa Marine Shale from conventional well logs. We trained ML models on a dataset containing conventional and brittleness index logs from 8 wells. The latter were estimated either from geomechanical logs or log-derived mineralogy. Moreover, to ensure mechanical data reliability, dynamic-to-static conversion ratios were applied to Young's modulus and Poisson's ratio. The predictor features included neutron porosity, density and compressional slowness logs to account for the petrophysical and mineralogical character of TMS. The brittleness index was predicted using algorithms such as Linear, Ridge and Lasso Regression, K-Nearest Neighbors, Support Vector Machine (SVM), Decision Tree, Random Forest, AdaBoost and Gradient Boosting. Models were shortlisted based on the Root Mean Square Error (RMSE) value and fine-tuned using the Grid Search method with a specific set of hyperparameters for each model. Overall, Gradient Boosting and Random Forest outperformed other algorithms and showed an average error reduction of 5 %, a normalized RMSE of 0.06 and a R-squared value of 0.89. The Gradient Boosting was chosen to evaluate the test set and successfully predicted the brittleness index with a normalized RMSE of 0.07 and R-squared value of 0.83. This paper presents the practical use of machine learning to evaluate brittleness in a cost and time effective manner and can further provide valuable insights into the optimization of completion in TMS. The proposed ML model can be used as a tool for initial screening of fracturing candidates and selection of fracturing intervals in other clay-rich and heterogeneous shale formations.

scholarly journals Heart disease prediction using machine learning techniques : a survey

2018 ◽  
Vol 7 (2.8) ◽  
pp. 684 ◽  
Author(s):  
V V. Ramalingam ◽  
Ayantan Dandapath ◽  
M Karthik Raja
Keyword(s):  
Machine Learning ◽  
Learning Algorithms ◽  
Machine Learning Algorithms ◽  
Machine Learning Techniques ◽  
Support Vector ◽  
Complex Data ◽  
Learning Techniques ◽  
Vector Machines ◽  
Supervised Learning Algorithms ◽  
Life Threatening

Heart related diseases or Cardiovascular Diseases (CVDs) are the main reason for a huge number of death in the world over the last few decades and has emerged as the most life-threatening disease, not only in India but in the whole world. So, there is a need of reliable, accurate and feasible system to diagnose such diseases in time for proper treatment. Machine Learning algorithms and techniques have been applied to various medical datasets to automate the analysis of large and complex data. Many researchers, in recent times, have been using several machine learning techniques to help the health care industry and the professionals in the diagnosis of heart related diseases. This paper presents a survey of various models based on such algorithms and techniques andanalyze their performance. Models based on supervised learning algorithms such as Support Vector Machines (SVM), K-Nearest Neighbour (KNN), NaïveBayes, Decision Trees (DT), Random Forest (RF) and ensemble models are found very popular among the researchers.

Sign in / Sign up

Export Citation Format

Share Document