scholarly journals Factors Determining Soil Water Repellency in Two Coniferous Plantations on a Hillslope

Forests ◽  
2019 ◽  
Vol 10 (9) ◽  
pp. 730 ◽  
Author(s):  
Moein Farahnak ◽  
Keiji Mitsuyasu ◽  
Kyoichi Otsuki ◽  
Kuniyoshi Shimizu ◽  
Atsushi Kume
Keyword(s):  
Soil Water ◽  
Overland Flow ◽  
Soil Aggregates ◽  
Aggregate Size ◽  
Water Repellency ◽  
Soil Aggregate ◽  
Water Infiltration ◽  
Soil Water Repellency ◽  
Tree Cutting ◽  
Coniferous Plantations

Soil water repellency (SWR) is a cause of low water infiltration, overland flow and soil erosion in mountainous coniferous plantations in Japan. The factors determining SWR intensity were investigated in two coniferous plantations of Chamaecyparis obtusa (Siebold et Zucc.) Endl. and Cryptomeria japonica (L.f.) D. Don, using intact tree plots and cut tree plots on the same hillslope. The SWR of Ch. obtusa plots was stronger than that of Cr. japonica plots. SWR intensity decreased after tree cutting. There were no significant differences in SWR upslope and downslope of individual trees/stumps for both tree species, though areas downslope of individual Ch. obtusa trees had higher SWR intensity than those upslope. SWR intensity and soil aggregate stability were positively correlated in the Ch. obtusa intact tree plot (r = 0.88, p < 0.01), whereas in the cut tree plot, this correlation was weak with no significance (r = 0.29, p = 0.41). Soil aggregate size had a non-significant influence on SWR intensity. These findings suggest that SWR intensity was not related to the soil aggregate size, but SWR intensity seemed have a role in soil aggregation in the Ch. obtusa intact tree plot. Destruction of soil aggregates could occur after tree cutting because of physical disturbances or increased input of different types of organic matter from other vegetation into soil. The presence of Ch. obtusa introduces a source of SWR, although uncertainty remains about how water repellency is distributed around soil aggregates. The distribution pattern of soil water content and soil hydraulic conductivity around Cr. japonica was related to other factors such as the litter layer and non-water-repellant soil.

scholarly journals Inverse estimation of soil hydraulic properties and water repellency following artificially induced drought stress

2018 ◽  
Vol 66 (2) ◽  
pp. 170-180 ◽  
Author(s):  
Vilim Filipović ◽  
Thomas Weninger ◽  
Lana Filipović ◽  
Andreas Schwen ◽  
Keith L. Bristow ◽  
...  
Keyword(s):  
Soil Water ◽  
Inverse Modeling ◽  
Hydraulic Properties ◽  
Global Climate ◽  
Water Repellency ◽  
Irrigation Event ◽  
Water Infiltration ◽  
Soil Hydraulic Properties ◽  
Soil Water Repellency ◽  
Soil Hydraulic

AbstractGlobal climate change is projected to continue and result in prolonged and more intense droughts, which can increase soil water repellency (SWR). To be able to estimate the consequences of SWR on vadose zone hydrology, it is important to determine soil hydraulic properties (SHP). Sequential modeling using HYDRUS (2D/3D) was performed on an experimental field site with artificially imposed drought scenarios (moderately M and severely S stressed) and a control plot. First, inverse modeling was performed for SHP estimation based on water and ethanol infiltration experimental data, followed by model validation on one selected irrigation event. Finally, hillslope modeling was performed to assess water balance for 2014. Results suggest that prolonged dry periods can increase soil water repellency. Inverse modeling was successfully performed for infiltrating liquids, water and ethanol, withR2and model efficiency (E) values both > 0.9. SHP derived from the ethanol measurements showed large differences in van Genuchten-Mualem (VGM) parameters for the M and S plots compared to water infiltration experiments. SWR resulted in large saturated hydraulic conductivity (Ks) decrease on the M and S scenarios. After validation of SHP on water content measurements during a selected irrigation event, one year simulations (2014) showed that water repellency increases surface runoff in non-structured soils at hillslopes.

Water Shedding Properties of Oil Impregnated Hydrophobic Soils

2020 ◽  
Author(s):  
Rebecca McCerery ◽  
John Woodward ◽  
Glen McHale ◽  
Kate Winter
Keyword(s):  
Soil Water ◽  
Silicone Oil ◽  
Water Repellency ◽  
Contact Angles ◽  
Water Infiltration ◽  
Natural Soil ◽  
Particle Sizes ◽  
Soil Water Repellency ◽  
Water Contact ◽  
Naturally Occurring

&lt;p&gt;Hydrophobic soils and sediments have gained significant interest in soil science due to negatively influencing biomass production and as drivers of landslides and enhanced erosion. Whilst natural and fire-induced soil water repellency have been studied, little work has considered how the sediment-water interaction with naturally occurring hydrophobic sediments might change in the presence of oil. Recent advances in materials physics have shown bio-inspired slippery liquid infused porous surfaces (SLIPS) and lubricant impregnated surfaces (LIS) can produce super slippery surfaces with excellent water shedding properties. Here we apply this new understanding to the physics of soil water repellency and address how the presence of oil, whether from contamination or otherwise, might influence water infiltration. We hypothesise that oil impregnating a hydrophobic soil may create stable oil coatings and/or layers that create soil surfaces resistant to water infiltration and with enhanced run-off of water. Using monolayers of sand, silt and clay particles treated with a commercial hydrophobising agent and silicone oil, we created model (oil-free) hydrophobic and oil impregnated hydrophobic soils. Static water contact angles and droplet sliding angles were used to classify their degree of hydrophobicity and ability to shed water. Our results show that in the absence of oil, model hydrophobic soil surfaces with particle sizes below 63&amp;#956;m are superhydrophobic with water droplet contact angles above 150 degrees. In the presence of oil, we observed a sediment-based SLIP/LI surface on particle sizes below 63&amp;#956;m with water contact angles of 90 degrees and droplet sliding angles of below 5 degrees. We also achieved reduced sliding angles compared to the oil-free surfaces, and a conformal layer of oil on all particle sizes. These results support our hypothesis that SLIPS/LIS may occur in natural soil systems. These results have implications for soil water repellency, oil clean up from soil and for processes occurring in other sedimentary environments caused by both naturally occurring and anthropogenic contamination of oils.&lt;/p&gt;

scholarly journals Assessing Water Infiltration and Soil Water Repellency in Brazilian Atlantic Forest Soils

2020 ◽  
Vol 10 (6) ◽  
pp. 1950 ◽  
Author(s):  
Sergio Esteban Lozano-Baez ◽  
Miguel Cooper ◽  
Silvio Frosini de Barros Ferraz ◽  
Ricardo Ribeiro Rodrigues ◽  
Laurent Lassabatere ◽  
...  
Keyword(s):  
Hydraulic Conductivity ◽  
Soil Water ◽  
Atlantic Forest ◽  
Water Repellency ◽  
Water Infiltration ◽  
Brazilian Atlantic Forest ◽  
Soil Water Repellency ◽  
Soil Hydraulic Conductivity ◽  
Soil Hydraulic ◽  
Remnant Forest

This study presents the results of the soil hydraulic characterization performed under three land covers, namely pasture, 9-year-old restored forest, and remnant forest, in the Brazilian Atlantic Forest. Two types of infiltration tests were performed, namely tension (Mini-Disk Infiltrometer, MDI) and ponding (Beerkan) tests. MDI and Beerkan tests provided complementary information, highlighting a clear increase of the hydraulic conductivity, especially at the remnant forest plots, when moving from near-saturated to saturated conditions. In addition, measuring the unsaturated soil hydraulic conductivity with different water pressure heads allowed the estimation of the macroscopic capillary length in the field. This approach, in conjunction with Beerkan measurements, allowed the design better estimates of the saturated soil hydraulic conductivity under challenging field conditions, such as soil water repellency (SWR). This research also reports, for the first time, evidence of SWR in the Atlantic Forest, which affected the early stage of the infiltration process with more frequency in the remnant forest.

Soil water repellency after wildfires in the Blue Ridge Mountains, United States

2020 ◽  
Vol 29 (11) ◽  
pp. 1009 ◽  
Author(s):  
Jingjing Chen ◽  
Luke A. Pangle ◽  
John P. Gannon ◽  
Ryan D. Stewart
Keyword(s):  
United States ◽  
Soil Water ◽  
Overland Flow ◽  
Water Repellency ◽  
Deciduous Forests ◽  
Organic Layer ◽  
Blue Ridge ◽  
Soil Water Repellency ◽  
Blue Ridge Mountains ◽  
Study Results

It is not well understood if wildfires induce soil water repellency in broadleaf deciduous forests, such as those endemic to the Blue Ridge Mountains of the eastern United States. In 2016, widespread wildfires provided an opportunity to study soil water repellency in this region. We selected sites in four locations with low to moderate burn severities, along with unburned controls. We estimated soil water repellency using water drop penetration time measurements from the surface (i.e. ash or organic) layer to ~5cm within the underlying mineral layer. Two months after the fires, water repellency was detected in all locations and was greater in more severely burned sites. One location had the greatest water repellency in surface ash (frequency of occurrence: 68–74%), whereas the other locations showed greatest repellency at the ash–mineral interface (40–96%). Unburned soils rarely showed repellency (0–18%). Burned soils also exhibited water repellency 1 year post fire. The study results suggest that combustion of non-resinous foliage within litter layers can cause water repellency in deciduous forests, meaning that this condition is not exclusive to coniferous and dryland forests. The duration of impact depends on fire severity, and may enhance overland flow and sediment transport in affected landscapes.

Assessing Water Infiltration and Soil Water Repellency in Brazilian Atlantic Forest Soils

2020 ◽  
Author(s):  
Sergio Esteban Lozano-Baez ◽  
Miguel Cooper ◽  
Silvio Frosini de Barros Ferraz ◽  
Ricardo Ribeiro Rodrigues ◽  
Mirko Castellini ◽  
...  
Keyword(s):  
Hydraulic Conductivity ◽  
Soil Water ◽  
Atlantic Forest ◽  
Water Repellency ◽  
Water Infiltration ◽  
Brazilian Atlantic Forest ◽  
Soil Water Repellency ◽  
Soil Hydraulic Conductivity ◽  
Soil Hydraulic ◽  
Remnant Forest

&lt;p&gt;This study presents the results of the soil hydraulic characterization performed under three land covers, namely pasture, 9-year-old restored forest, and remnant forest, in the Brazilian Atlantic Forest. Two types of infiltration tests were performed, namely tension (Mini-Disk Infiltrometer, MDI) and ponding (Beerkan) tests. MDI and Beerkan tests provided a complementary information, highlighting a clear increase of the hydraulic conductivity, especially at the remnant forest plots, when moving from near-saturated to saturated conditions. In addition, measuring the unsaturated soil hydraulic conductivity with different water pressure heads also allowed to estimate the macroscopic capillary length in the field. This approach, in conjunction with Beerkan measurements, allowed to generate better estimates of the saturated soil hydraulic conductivity under challenging field conditions, such as soil water repellency (SWR). This research also reports for the first time evidence of SWR in the Atlantic Forest, which affected the early stage of the infiltration process with more frequency in the remnant forest.&lt;/p&gt;

The role of soil water repellency in overland flow generation in pine and eucalypt forest stands in coastal Portugal

Soil Research ◽  
2005 ◽  
Vol 43 (3) ◽  
pp. 337 ◽  
Author(s):  
J. J. Keizer ◽  
C. O. A. Coelho ◽  
R. A. Shakesby ◽  
C. S. P. Domingues ◽  
M. C. Malvar ◽  
...  
Keyword(s):  
Soil Water ◽  
Overland Flow ◽  
Slope Angle ◽  
Soil Surface ◽  
Water Repellency ◽  
Rainfall Simulation ◽  
Soil Water Repellency ◽  
Infiltration Capacity ◽  
Eucalypt Forest ◽  
Flow Generation

Soil water repellency is now known to occur in diverse soils in various parts of the world. One of the possible adverse effects of soil water repellency is that it can reduce infiltration capacity and hence, on sloping terrain, enhance overland flow and soil erosion. The main aim of the present work is to assess the effects of soil water repellency on surface runoff production in the inner coastal dune areas of central Portugal. This was done for a pine and a eucalypt forest stand and, within each stand, for 2 slopes with contrasting aspect and somewhat different slope angles. Overland flow was measured for 4 pairs of unbounded plots of about 5 m2 at fortnightly intervals from February to October 2001. Over the same period, soil water repellency at and immediately below the soil surface was measured next to the plots at monthly intervals. The runoff–repellency relationship was also studied by carrying out rainfall simulation experiments on 0.24-m2 plots and associated repellency measurements. The effect of soil water repellency was most clearly demonstrated by statistically significant higher runoff coefficients under strong-to-extremely than under none-to-slightly hydrophobic conditions immediately below the soil surface. Such a difference in runoff over the measurement period was, however, restricted to 2 unbounded plots, both of which were located on the eucalypt slope with a southerly aspect and the greater slope angle. At the scale of these plots, the increase in runoff coefficient due to soil water repellency is moderate, when integrated over the entire period of strong–extremely repellent conditions, but can be quite substantial for individual 2-weekly periods. With respect to the observed differences in runoff between plots, be it plots on the same slope or not, it has proved difficult to distinguish the effect of soil water repellency from that of other factors likely to affect overland flow generation.

Soil water repellency in north-eastern Greece with adverse effects of drying on the persistence

Soil Research ◽  
2005 ◽  
Vol 43 (3) ◽  
pp. 281 ◽  
Author(s):  
Apostolos K. Ziogas ◽  
Coen J. Ritsema ◽  
Klaas Oostindie ◽  
Louis W. Dekker
Keyword(s):  
Soil Water ◽  
Water Repellency ◽  
Soil Samples ◽  
Water Infiltration ◽  
Agricultural Fields ◽  
Water Repellent ◽  
Soil Water Repellency ◽  
Kiwi Fruit ◽  
Soil Matrix ◽  
North Eastern

Many soils may be water repellent to some degree, challenging the common perception that soil water repellency is only an interesting aberration. When dry, water repellent soils resist or retard water infiltration into the soil matrix. Soil water repellency often leads to the development of unstable wetting and preferential flow paths. In the present study the persistence of water repellency was examined on samples from topsoils in Thrace, north-eastern Greece, using the Water Drop Penetration Time (WDPT) test. The soil samples were collected from agricultural fields throughout the prefectures of Xanthi and Rodopi. Six sites were selected for intensive sampling of water repellency and soil moisture content in transects. Water repellency was measured on field-moist soil samples and after drying the samples at increasing temperatures, to study the influence of drying temperature on the persistence of soil water repellency. Measurements of soil samples taken in agricultural fields under different crops, e.g. winter wheat, tobacco, clover, olive groves, kiwi fruit, and vineyards, in the area of Thrace, revealed that 45% of the locations exhibited actual water repellency during dry periods. Drying of samples from the Sostis site resulted in wettable soil, whereas drying of samples from the Mitriko site increased repellency. Therefore, water repellency should preferably be measured on samples taken in the field under dry conditions in order to reveal and determine the highest persistence of water repellency that might occur in the field.

Sign in / Sign up

Export Citation Format

Share Document