scholarly journals Determination of Fracture Initiation Locations during Cross-Measure Drilling for Hydraulic Fracturing of Coal Seams

Energies ◽  
2016 ◽  
Vol 9 (5) ◽  
pp. 358 ◽  
Author(s):  
Yiyu Lu ◽  
Yugang Cheng ◽  
Zhaolong Ge ◽  
Liang Cheng ◽  
Shaojie Zuo ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Fracture Initiation ◽  
Coal Seams

Paсker Sealing–Wellbore Interaction in Hydraulic Fracturing in Coal Seams

2020 ◽  
Vol 56 (4) ◽  
pp. 547-556 ◽  
Author(s):  
S. V. Klishin ◽  
V. I. Klishin
Keyword(s):  
Hydraulic Fracturing ◽  
Coal Seams

scholarly journals Comparative characteristics of the petrographic composition and quality of coal series С12 and С13 of the Prydniporovia Block

2021 ◽  
Vol 30 (1) ◽  
pp. 145-152
Author(s):  
Vyacheslav S. Savchuk ◽  
Vasyl F. Prykhodchenko ◽  
Dmytro V. Prykhodchenko ◽  
Valeriia V. Tykhonenko
Keyword(s):  
Volatile Matter ◽  
Matter Content ◽  
Coal Seams ◽  
Combustion Heat ◽  
Petrographic Composition ◽  
Genetic Features ◽  
History Of ◽  
Coal Composition ◽  
Technological Indices

Taking into consideration the whole history of geological development of the Western Donbas, data on composition and grade of С12 series coal involved information about the geotectonic development of the Basin. To satisfy the objectives, a system of research methods, covering petrographic, computational, statistical, chronological, comparative and other methods, has been applied. In the process of identification of the petrographic composition and grade of series С12coal on the territory of the Prydniprovia Block, and determination of lateral regularities of their change as well as change in stratigraphic section of the Lower Carboniferous, data of petrographic as well as chemical and technological indices of the coal seam c1 were generalized along with data of all seams of С13 series. The activities helped define genetic features of series С12coal as well as stratigraphic and lateral regularities of changes in the coal composition. The differences in the petrographic composition as well as in the chemical and technological characteristics of series С12 and С13 are indicative of dissimilar conditions of formation of their peat depositions. It has been determined that compared with С13 series coal, the coal of С12 series contains more humidity and fewer mineral impurities. It is characterized by higher values of sulfur content, volatile-matter content, and combustion heat. The ultimate composition of coal seams of С12series is characterized by smaller values of carbon and oxygen contents as well as greater hydrogen content. The conclusions on common features and differences in the petrographic composition as well as chemical and technological features of coal seams of С12and С13 series, and regularities of their changes over the area of the seam occurrence was assessed.

The Application of Hydraulic Fracturing in Storage Projects of Liquefied Petroleum Gas

2006 ◽  
Vol 306-308 ◽  
pp. 1509-1514 ◽  
Author(s):  
Jing Feng ◽  
Qian Sheng ◽  
Chao Wen Luo ◽  
Jing Zeng
Keyword(s):  
Rock Mass ◽  
Hydraulic Fracturing ◽  
Stress Measurement ◽  
Test Procedure ◽  
In Situ Stress ◽  
Test System ◽  
Petroleum Engineering ◽  
Liquefied Petroleum Gas

It is very important to study the pristine stress field in Civil, Mining, Petroleum engineering as well as in Geology, Geophysics, and Seismology. There are various methods of determination of in-situ stress in rock mass. However, hydraulic fracturing techniques is the most convenient method to determine and interpret the test results. Based on an hydraulic fracturing stress measurement campaign at an underground liquefied petroleum gas storage project which locates in ZhuHai, China, this paper briefly describes the various uses of stress measurement, details of hydraulic fracturing test system, test procedure adopted and the concept of hydraulic fracturing in arriving at the in-situ stresses of the rock mass.

Experience in Optimizing the Location and Parameters of Multistage Hydraulic Fractures for a Multilateral Well Based on Reservoir Simulation

2021 ◽  
Author(s):  
Vil Syrtlanov ◽  
Yury Golovatskiy ◽  
Konstantin Chistikov ◽  
Dmitriy Bormashov
Keyword(s):  
Hydraulic Fracturing ◽  
Reservoir Simulation ◽  
Optimal Placement ◽  
Hydraulic Fractures ◽  
Low Permeability ◽  
Advantages And Disadvantages ◽  
Modeling Methods ◽  
Multistage Hydraulic Fracturing ◽  
Determination Of Parameters

Abstract This work presents the approaches used for the optimal placement and determination of parameters of hydraulic fractures in horizontal and multilateral wells in a low-permeability reservoir using various methods, including 3D modeling. The results of the production rate of a multilateral dualwellbore well are analyzed after the actual hydraulic fracturing performed on the basis of calculations. The advantages and disadvantages of modeling methods are evaluated, recommendations are given to improve the reliability of calculations for models with hydraulic fracturing (HF)/ multistage hydraulic fracturing (MHF).

Determination of the Near-Wellbore Pressure Drop for Dual Casing in Hydraulic Fracturing and Refracturing Applications

2022 ◽  
Author(s):  
Joern Loehken ◽  
Davood Yosefnejad ◽  
Liam McNelis ◽  
Bernd Fricke
Keyword(s):  
Pressure Drop ◽  
Hydraulic Fracturing ◽  
Complex Flow ◽  
Cement Layer ◽  
Natural Rock ◽  
Wellbore Pressure ◽  
Flow Through ◽  
The Difference ◽  
Coefficient Of Discharge

Abstract Due to the increases in completion costs demand for production improvements, fracturing through double casing in upper reservoirs for mature wells and refracturing early stimulated wells to change the completion design, has become more and more popular. One of the most common technologies used to re-stimulate previously fracked wells, is to run a second, smaller casing or tubular inside of the existing and already perforated pipes of the completed well. The new inner and old outer casing are isolated from each other by a cement layer, which prevents any hydraulic communication between the pre-existing and new perforations, as well as between adjacent new perforations. For these smaller inner casing diameters, specially tailored and designed re-fracturing perforation systems are deployed, which can shoot casing entrance holes of very similar size through both casings, nearly independent of the phasing and still capable of creating tunnels reaching beyond the cement layer into the natural rock formation. Although discussing on the API RP-19B section VII test format has recently been initiated and many companies have started to test multiple casing scenarios and charge performance, not much is known about the complex flow through two radially aligned holes in dual casings. In the paper we will look in detail at the parameters which influence the flow, especially the Coefficient of Discharge of such a dual casing setup. We will evaluate how much the near wellbore pressure drop is affected by the hole's sizes in the first and second casing, respectively the difference between them and investigate how the cement layer is influenced by turbulences, which might build up in the annulus. The results will enhance the design and provide a better understanding of fracturing or refracturing through double casings for hydraulic fracturing specialists and both operation and services companies.

Massive Hydraulic Fracturing to Control Gas Outbursts in Soft Coal Seams

2022 ◽  
Author(s):  
Shuaifeng Lyu ◽  
Shengwei Wang ◽  
Junyang Li ◽  
Xiaojun Chen ◽  
Lichao Chen ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Coal Seams ◽  
Soft Coal
Sign in / Sign up

Export Citation Format

Share Document