scholarly journals An Iterative Method to Derive the Equivalent Centrifugal Compressor Performance at Various Operating Conditions: Part I: Modelling of Suction Parameters Impact

Energies ◽  
2015 ◽  
Vol 8 (8) ◽  
pp. 8497-8515 ◽  
Author(s):  
Waleed Albusaidi ◽  
Pericles Pilidis
Keyword(s):  
Iterative Method ◽  
Centrifugal Compressor ◽  
Operating Conditions ◽  
Compressor Performance

The performance of a centrifugal compressor with a tandem impeller in off-design conditions

2019 ◽  
Vol 234 (2) ◽  
pp. 156-172 ◽  
Author(s):  
Ziliang Li ◽  
Xingen Lu ◽  
Ge Han ◽  
Yanfeng Zhang ◽  
Shengfeng Zhao ◽  
...  
Keyword(s):  
Centrifugal Compressor ◽  
Performance Enhancement ◽  
Pressure Ratio ◽  
Operating Conditions ◽  
Complex Flow ◽  
Maximum Enhancement ◽  
Operating Range ◽  
Wide Range ◽  
Compressor Performance ◽  
Low Efficiency

Centrifugal compressors often suffer relatively low efficiency and a terrible operating range particularly due to the complex flow structure and intense impeller/diffuser interaction. Numerous studies have focused on improving the centrifugal compressor performance using many innovative ideas, such as the tandem impeller, which has become increasingly attractive due to its ability to achieve the flow control with no additional air supply configurations and control costs in compressor. However, few studies that attempted to the investigation of tandem impeller have been published until now and the results are always contradictory. To explore the potential of the tandem impeller to enhance the compressor performance and the underlying mechanism of the flow phenomena in the tandem impellers, this paper numerically investigated a high-pressure-ratio centrifugal compressor with several tandem impellers at off-design operating speeds. The results encouragingly demonstrate that the tandem impeller can achieve a performance enhancement over a wide range of operating conditions. Approximately 1.8% maximum enhancement in isentropic efficiency and 5.0% maximum enhancement in operating range are achieved with the inducer/exducer circumferential displacement of [Formula: see text] = 25% and 50%, respectively. The observed stage performance gain of the tandem impellers decreases when the operating speed increases due to the increased inducer shock, increased wake losses, and deteriorated tandem impeller discharge flow uniformity. In addition, the tandem impeller can extend the impeller operating range particularly at low rotation speeds, which is found to be a result from the suppression of the low-momentum fluid radial movement. The results also indicate that the maximum flux capacity of the tandem impeller decreases due to the restriction of the inducer airfoil Kutta–Joukowsky condition.

Variable Inlet Guide Vane Effect on Centrifugal Compressor Performance in Wet Gas Flow

2016 ◽  
Author(s):  
Levi André B. Vigdal ◽  
Lars E. Bakken
Keyword(s):  
Centrifugal Compressor ◽  
Guide Vane ◽  
Flow Direction ◽  
Pressure Ratio ◽  
Operating Conditions ◽  
Inlet Guide Vane ◽  
Compressor Stage ◽  
Guide Vanes ◽  
Wet Gas ◽  
Compressor Performance

The introduction of variable inlet guide vanes (VIGVs) upfront of a compressor stage affects performance and permits tuning for off-design conditions. This is of great interest for emerging technology related to subsea compression. Unprocessed gas from the wellhead will contain liquid condensate, which affects the operational condition of the compressor. To investigate the effect of guide vanes on volume flow and pressure ratio in a wet gas compressor, VIGVs are implemented upfront of a centrifugal compressor stage to control the inlet flow direction. The guide vane geometry and test rig setup have previous been presented. This paper documents how changing the VIGV setting affects compressor performance under dry and wet operating conditions. The reduced performance effect and operating range at increased liquid content are of specific interest. Also documented is the change in the VIGV effect relative to the setting angle.

scholarly journals Experimental Study on Effects of Adjustable Vaned Diffusers on Impeller Backside Cavity of Centrifugal Compressor in CAES

Energies ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 6187
Author(s):  
Zhihua Lin ◽  
Zhitao Zuo ◽  
Wenbin Guo ◽  
Jianting Sun ◽  
Qi Liang ◽  
...  
Keyword(s):  
Centrifugal Compressor ◽  
Static Pressure ◽  
Internal Flow ◽  
Operating Conditions ◽  
Test Facility ◽  
Angle Change ◽  
Temperature Loss ◽  
Impeller Outlet ◽  
Compressor Performance ◽  
Variable Operating Conditions

The impeller backside cavity (IBC) is a unique structure of centrifugal compressor in compressed air energy storage (CAES) systems, which affects the aerodynamic performance of centrifugal compressor, and the angle change of the downstream coupled adjustable vaned diffusers (AVDs) will affect the flow field inside the cavity and compressor performance. This paper relies on the closed test facility of the high-power intercooling compressor to measure static pressure and static temperature at different radii on the static wall of the IBC. The coupling relationship between the IBC and compressor under variable operating conditions is analyzed, and the influence of AVDs on the internal flow in IBC is studied. The results show that static pressure and static temperature rise along the direction of increasing radius, but static temperature drops near the coupling between the impeller outlet and the cavity inlet. Under AVDs’ design angle, static pressure and static temperature at each point, static pressure loss and static temperature loss in the direction of decreasing radius all increase as the flow decreases. Under variable AVDs’ angles, static pressure and static temperature will change differently, and respective loss will also be different.

Effects of Fluid Leakage on Performance of a Centrifugal Compressor

1979 ◽  
Vol 101 (3) ◽  
pp. 337-342 ◽  
Author(s):  
T. Mashimo ◽  
I. Watanabe ◽  
I. Ariga
Keyword(s):  
Reynolds Number ◽  
Centrifugal Compressor ◽  
Operating Conditions ◽  
Tip Clearance ◽  
Friction Loss ◽  
Wall Friction ◽  
Fluid Loss ◽  
Leakage Loss ◽  
Compressor Performance

Fluid loss caused by leaks through the impeller tip clearance was investigated for a centrifugal compressor. Operating conditions, Reynolds number, and clearance were varied independently during the experiment. It was found that the average compressor performance would be reduced by about 4 percent when the relative clearance was increased from 0.0125 to 0.125 and the resulting leakage loss was dependent on the Reynolds number, the tendency of which was just opposite in case of wall friction loss, as was well-known. Moreover, a determination of the leakage loss coefficient was made as a function of the relative clearance, relative leak level and the Reynolds number as the result of this experiment.

scholarly journals Development of Centrifugal Compressor for 100 kW Automotive Ceramic Gas Turbine

1994 ◽  
Author(s):  
Hiroshi Uchida ◽  
Mutsuo Shiraki ◽  
Akinobu Bessho ◽  
Yoichi Yagi
Keyword(s):  
Research And Development ◽  
Gas Turbine ◽  
Centrifugal Compressor ◽  
High Efficiency ◽  
Operating Conditions ◽  
Guide Vanes ◽  
Inlet Guide Vanes ◽  
Surge Margin ◽  
Partial Load ◽  
Compressor Performance

In Japan, a program of research and development of a 100 kW automotive ceramic gas turbine (CGT) has been carried out in the Petroleum Energy Center with active cooperation of petroleum, automobile and ceramics industries as well as other related industries. As a part of this research and development program, we have studied and developed a centrifugal compressor with variable inlet guide vanes for CGT engines. There has been a strong demand for a compressor with a high efficiency and a wide flow range. The compressor performance goals are an adiabatic efficiency of 81% and a surge margin of 8% under maximum power operating conditions. This paper describes the methods for designing impellers, diffusers and variable inlet guide vanes, and presents the results of compressor performance tests. The test results reveal that the surge margin and compressor efficiency at partial load are improved by using inlet guide vanes.

Effects of geometric and operational uncertainties on aerodynamic performance of centrifugal compressor stage

2021 ◽  
pp. 095765092110472
Author(s):  
Rui Zhu ◽  
Yaping Ju ◽  
Chuhua Zhang
Keyword(s):  
Centrifugal Compressor ◽  
Pressure Rise ◽  
Operating Conditions ◽  
Tip Clearance ◽  
Collocation Methods ◽  
Inlet Temperature ◽  
Compressor Stage ◽  
Centrifugal Compressor Stage ◽  
Compressor Performance ◽  
Stage Performance

No real centrifugal compressor can exactly conform to its design geometry and expected operating conditions due to the uncertainties existing in the manufacturing and operational processes. Such uncertainties have been increasingly recognised to be detrimental to compressor performance. However, quite few studies have focused on the combined effects of geometric and operational uncertainties on compressor performance, and the underlying flow mechanism even remains unclear. In this context, we here present an uncertainty analysis of a centrifugal compressor stage, with both geometric and operational uncertainties taken into account. With the combination of CFD simulation and nonintrusive sparse grid based stochastic collocation methods, the combined and individual effects of total inlet temperature, total inlet pressure, outlet mass flow, impeller tip clearance and hub fillet radius on the stage/impeller performance are quantified and analysed. Particular attention is paid to elucidating the compressor performance variations through flow field and energy decomposition analyses. Results show that the considered uncertainties exert more influence on the compressor stage performance rather than on the impeller performance. Amongst the examined uncertainties, the impeller tip clearance contributes the most to the stage performance. The underlying mechanism lies in that the wake of impeller tip clearance produces distorted flow downstream towards the diffuser, which causes complicated vortex structures and less conversion of kinetic energy to pressure rise in the diffuser passage. The present study lays a theoretical foundation for the further uncertainty quantification and robust design of centrifugal compressors against various sources of uncertainties.

Study on Characteristics of the Linear Air-Conditioner Compressor at Varied Operating Conditions

2011 ◽  
Vol 201-203 ◽  
pp. 632-636 ◽  
Author(s):  
Jie Fei Xie ◽  
Xin Hua Li ◽  
Hong Zhang
Keyword(s):  
Engineering Application ◽  
Axial Direction ◽  
Operating Conditions ◽  
Air Conditioner ◽  
Design Development ◽  
Runge Kutta Method ◽  
Moving Body ◽  
Cylinder Piston ◽  
Compressor Performance ◽  
Intake Pressure

This paper mainly introduces a novel linear air conditioner compressor which is driven by the linear oscillatory motor with two divided moving body, of which the Cylinder-piston assembly presents symmetrical distribution along the axial direction. The compressor dynamics equations were built and solved numerically with the fourth order Runge-Kutta method. in the meantime, this paper emphatically analyzes the influence of those factors, such as the intake pressure, the exhaust pressure, the suction gas superheat, the cooling degree, on the compressor performance at varied operating conditions. These works shows that improving the suction gas pressure and reducing the exhuast pressure can help to increase the refrigeration capacity and energy efficiency ratio of the air conditioner compressor. Those analysis results provide theory foundation for design,development, and engineering application of this linear air-conditioner compressor.

Effects of Diffuser Vane Geometries on Compressor Performance and Noise Characteristics in a Centrifugal Compressor

2013 ◽  
Author(s):  
Yohei Morita ◽  
Nobumichi Fujisawa ◽  
Takashi Goto ◽  
Yutaka Ohta
Keyword(s):  
Centrifugal Compressor ◽  
Noise Level ◽  
Leading Edge ◽  
Broadband Noise ◽  
Frequency Noise ◽  
Numerical Techniques ◽  
Vaned Diffuser ◽  
Noise Characteristics ◽  
Edge Vortex ◽  
Compressor Performance

The effects of the diffuser vane geometries on the compressor performance and noise characteristics of a centrifugal compressor equipped with vaned diffusers were investigated by experiments and numerical techniques. Because we were focusing attention on the geometries of the diffuser vane’s leading edge, diffuser vanes with various leading edge geometries were installed in a vaned diffuser. A tapered diffuser vane with the tapered portion near the leading edge of the diffuser’s hub-side could remarkably reduce both the discrete frequency noise level and broadband noise level. In particular, a hub-side tapered diffuser vane with a taper on only the hub-side could suppress the development of the leading edge vortex (LEV) near the shroud side of the diffuser vane and effectively enhanced the compressor performance.

Parametric Studies of Pipe Diffuser on Performance of a Highly Loaded Centrifugal Compressor

2014 ◽  
Vol 136 (12) ◽  
Author(s):  
Ge Han ◽  
Xingen Lu ◽  
Shengfeng Zhao ◽  
Chengwu Yang ◽  
Junqiang Zhu
Keyword(s):  
Centrifugal Compressor ◽  
Performance Enhancement ◽  
Detailed Comparison ◽  
Flow Distortion ◽  
Flow Solver ◽  
Beneficial Effects ◽  
Physical Mechanisms ◽  
Parametric Studies ◽  
Compressor Performance ◽  
Highly Loaded

Pipe diffusers with several different geometries were designed for a highly loaded centrifugal compressor originally using a wedge diffuser. Parametric studies on the effect of pipe diffuser performance of a highly loaded centrifugal compressor by varying pipe diffuser inlet-to-impeller exit radius ratio, throat length, divergence angle, and throat area on centrifugal compressor performance were performed using a state-of-the-art multiblock flow solver. An optimum design of pipe diffuser was obtained from the parametric study, and the numerical results indicate that this pipe diffuser has remarkable advantageous effects on the compressor performance. Furthermore, a detailed comparison of flow visualization between the pipe diffuser and the wedge diffuser was conducted to identify the physical mechanism that account for the beneficial effects of the pipe diffuser on the performance and stability of the compressor. It was found that the performance enhancement afforded by the pipe diffuser is a result of the unique diffuse inlet flow pattern. Alleviating flow distortion in the diffuser inlet and reducing the possibility of a flow separation in discrete passages are the physical mechanisms responsible for improving the highly loaded centrifugal compressor performance.

Sign in / Sign up

Export Citation Format

Share Document