scholarly journals Aqueous Hybrids of Silica Nanoparticles and Hydrophobically Associating Hydrolyzed Polyacrylamide Used for EOR in High-Temperature and High-Salinity Reservoirs

Energies ◽  
2014 ◽  
Vol 7 (6) ◽  
pp. 3858-3871 ◽  
Author(s):  
Dingwei Zhu ◽  
Limin Wei ◽  
Biqing Wang ◽  
Yujun Feng
Keyword(s):  
High Temperature ◽  
Silica Nanoparticles ◽  
High Salinity ◽  
Hydrophobically Associating ◽  
Hydrolyzed Polyacrylamide

scholarly journals High Salinity and High Temperature Stable Colloidal Silica Nanoparticles with Wettability Alteration Ability for EOR Applications

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 707 ◽  
Author(s):  
Nanji J. Hadia ◽  
Yeap Hung Ng ◽  
Ludger Paul Stubbs ◽  
Ole Torsæter
Keyword(s):  
Thermal Stability ◽  
Contact Angle ◽  
High Temperature ◽  
Stability Analysis ◽  
Silica Nanoparticles ◽  
Oil Recovery ◽  
High Salinity ◽  
Angle Measurements ◽  
Accelerated Stability ◽  
Contact Angle Measurements

The stability of nanoparticles at reservoir conditions is a key for a successful application of nanofluids for any oilfield operations, e.g., enhanced oil recovery (EOR). It has, however, remained a challenge to stabilize nanoparticles under high salinity and high temperature conditions for longer duration (at least months). In this work, we report surface modification of commercial silica nanoparticles by combination of zwitterionic and hydrophilic silanes to improve its stability under high salinity and high temperature conditions. To evaluate thermal stability, static and accelerated stability analyses methods were employed to predict the long-term thermal stability of the nanoparticles in pH range of 4–7. The contact angle measurements were performed on aged sandstone and carbonate rock surfaces to evaluate the ability of the nanoparticles to alter the wettability of the rock surfaces. The results of static stability analysis showed excellent thermal stability in 3.5% NaCl brine and synthetic seawater (SSW) at 60 °C for 1 month. The accelerated stability analysis predicted that the modified nanoparticles could remain stable for at least 6 months. The results of contact angle measurements on neutral-wet Berea, Bentheimer, and Austin Chalk showed that the modified nanoparticles were able to adsorb on these rock surfaces and altered wettability to water-wet. A larger change in contact angle for carbonate surface than in sandstone surface showed that these particles could be more effective in carbonate reservoirs or reservoirs with high carbonate content and help improve oil recovery.

A Novel Thermoviscosifying Water-Soluble Polymer for Enhancing Oil Recovery from High-Temperature and High-Salinity Oil Reservoirs

2011 ◽  
Vol 306-307 ◽  
pp. 654-657 ◽  
Author(s):  
Yu Wang ◽  
Zhi Yong Lu ◽  
Yu Gui Han ◽  
Yu Jun Feng ◽  
Chong Li Tang
Keyword(s):  
High Temperature ◽  
Oil Recovery ◽  
High Salinity ◽  
Water Soluble ◽  
Oil Reservoirs ◽  
Water Soluble Polymer ◽  
The Poor ◽  
Hydrolyzed Polyacrylamide ◽  
Increasing Temperature ◽  
Enhance Oil Recovery

Polymer flooding represents one of the most efficient processes to enhance oil recovery, but the poor thermostability and salt tolerance of the currently-used partially hydrolyzed polyacrylamide (HPAM) impeded its use in high-temperature and high-salinity oil reservoirs. “Smart” thermoviscosifying polymers (TVPs) may overcome the deficiencies of HPAM. Steady and dynamic rheological behaviors against temperature of a novel TVP were examined in this work in comparison with a commercial HPAM polymer. It was found when increasing temperature, both apparent viscosity and elastic modulus increase for TVP aqueous solution, but decrease for HPAM solution. The results indicate that TVP shows some potential to be used in enhancing oil recovery from high-temperature and high-salinity oil reservoirs.

A Novel Hydroxylpropyl Sulfobetaine Surfactant for High Temperature and High Salinity Reservoirs

2013 ◽  
Author(s):  
Fan Zhang ◽  
Desheng Ma ◽  
Qiang Wang ◽  
Youyi Zhu ◽  
Wenli Luo
Keyword(s):  
High Temperature ◽  
High Salinity
Sign in / Sign up

Export Citation Format

Share Document