scholarly journals Feasibility Study on the Spread of NZEBs Using Economic Incentives

Energies ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 7169
Author(s):  
Diana D’Agostino ◽  
Milena Esposito ◽  
Francesco Minichiello ◽  
Carlo Renno
Keyword(s):  
High Performance ◽  
New Technologies ◽  
Tax Incentives ◽  
Economic Incentives ◽  
Simulation Software ◽  
Biomass Boiler ◽  
Eu Member States ◽  
Energy Retrofit ◽  
Net Zero ◽  
High Performance Buildings

Nowadays, environmental and energy issues attract a lot of attention in the civil buildings sector, leading to the emergence of new technologies and new targets, which include Net Zero Energy Buildings (NZEBs). However, despite the great response in scientific research, the spread of NZEBs in Europe is quite limited. This is due not only to the lack of transposition of the related European Directives into the various national legislations, but also to the high initial cost of such high-performance buildings. The aim of this paper is to demonstrate how different energy retrofit strategies on existing buildings can lead to the achievement of the NZEB target if encouraged by tax incentives, at zero or almost zero cost. The introduction of tax incentives by individual EU member states would allow the spread of NZEBs that are still underdeveloped, especially in highly urbanized contexts. A suitable building energy dynamic simulation software has been used. The case study refers to a villa located in Southern Italy and for which different energy retrofit strategies are proposed to reach the NZEB target. For each case, an energy and economic evaluation is carried out to evaluate the feasibility of the interventions, exploiting the so-called “Super-Eco-Bonus 110%” incentive. The main results highlight that among the various solutions, the greatest energy cost reductions are obtained with the use of heat pump generators. Furthermore, the solution with the biomass boiler allows the use of a smaller number of photovoltaic panels to meet the yearly energy balance of the NZEB.

scholarly journals Data and analytics to inform energy retrofit of high performance buildings

2014 ◽  
Vol 126 ◽  
pp. 90-106 ◽  
Author(s):  
Tianzhen Hong ◽  
Le Yang ◽  
David Hill ◽  
Wei Feng
Keyword(s):  
High Performance ◽  
Energy Retrofit ◽  
High Performance Buildings

scholarly journals Review of New Technologies' Energy Conservation Rate in High-Performance Buildings

KIEAE Journal ◽  
2016 ◽  
Vol 16 (1) ◽  
pp. 57-65
Author(s):  
Chul-Ho Kim ◽  
Ja-Kang Yang ◽  
Seung-Eon Lee ◽  
Ki-Hyung Yu ◽  
Kang-Soo Kim
Keyword(s):  
Energy Conservation ◽  
High Performance ◽  
New Technologies ◽  
Conservation Rate ◽  
High Performance Buildings

The Recent Revolution in High Performance Computing

MRS Bulletin ◽  
1997 ◽  
Vol 22 (10) ◽  
pp. 5-6
Author(s):  
Horst D. Simon
Keyword(s):  
High Performance Computing ◽  
High Performance ◽  
New Technologies ◽  
New Technology ◽  
Parallel Architecture ◽  
Time Frame ◽  
Good News ◽  
Computing Industry ◽  
Time And Energy ◽  
Performance Computing

Recent events in the high-performance computing industry have concerned scientists and the general public regarding a crisis or a lack of leadership in the field. That concern is understandable considering the industry's history from 1993 to 1996. Cray Research, the historic leader in supercomputing technology, was unable to survive financially as an independent company and was acquired by Silicon Graphics. Two ambitious new companies that introduced new technologies in the late 1980s and early 1990s—Thinking Machines and Kendall Square Research—were commercial failures and went out of business. And Intel, which introduced its Paragon supercomputer in 1994, discontinued production only two years later.During the same time frame, scientists who had finished the laborious task of writing scientific codes to run on vector parallel supercomputers learned that those codes would have to be rewritten if they were to run on the next-generation, highly parallel architecture. Scientists who are not yet involved in high-performance computing are understandably hesitant about committing their time and energy to such an apparently unstable enterprise.However, beneath the commercial chaos of the last several years, a technological revolution has been occurring. The good news is that the revolution is over, leading to five to ten years of predictable stability, steady improvements in system performance, and increased productivity for scientific applications. It is time for scientists who were sitting on the fence to jump in and reap the benefits of the new technology.

scholarly journals The Digitalization of the European Agri-Food Cooperative Sector. Determining Factors to Embrace Information and Communication Technologies

Agriculture ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 514
Author(s):  
Javier Jorge-Vázquez ◽  
Mª Peana Chivite-Cebolla ◽  
Francisco Salinas-Ramos
Keyword(s):  
Information And Communication Technologies ◽  
High Performance ◽  
New Technologies ◽  
Communication Technologies ◽  
Political Agenda ◽  
Food Sector ◽  
Technological Adoption ◽  
Synthetic Index ◽  
Determining Factors ◽  
Information And Communication

The digitization of the agri-food sector is a strategic priority in the political agenda of European institutions. The opportunity to improve the competitiveness and efficiency of the sector offered by new technologies comes together with its potential to face new economic and environmental challenges. This research aims to analyze the level of digitalization of the European agri-food cooperative sector from the construction of a composite synthetic index. Such an index is to be based on a diverse set of variables related to electronic commerce and the services offered through the internet. It also evaluates how European cooperatives influence the degree of technological adoption depending on their size or the wealth of the country where they carry out their activity. The empirical analytical method is thus used, through the analysis of frequencies and correlations. The results obtained reveal the existence of a suboptimal and heterogeneous degree of digitization of European agri-food cooperatives, clearly conditioned by their size and the wealth of the country where they operate. In this situation, it is recommended to promote public policies that guarantee high-performance digital connectivity, an improvement in training in digital skills and the promotion of cooperative integration processes.

scholarly journals Numerical Evaluation of a HVAC System Based on a High-Performance Heat Transfer Fluid

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3298
Author(s):  
Gianpiero Colangelo ◽  
Brenda Raho ◽  
Marco Milanese ◽  
Arturo de Risi
Keyword(s):  
Heat Transfer ◽  
High Performance ◽  
Cooling System ◽  
Electrical Energy ◽  
Simulation Software ◽  
Heat Transfer Fluid ◽  
Hvac System ◽  
Dynamic Simulations ◽  
Heating And Cooling ◽  
The University

Nanofluids have great potential to improve the heat transfer properties of liquids, as demonstrated by recent studies. This paper presents a novel idea of utilizing nanofluid. It analyzes the performance of a HVAC (Heating Ventilation Air Conditioning) system using a high-performance heat transfer fluid (water-glycol nanofluid with nanoparticles of Al2O3), in the university campus of Lecce, Italy. The work describes the dynamic model of the building and its heating and cooling system, realized through the simulation software TRNSYS 17. The use of heat transfer fluid inseminated by nanoparticles in a real HVAC system is an innovative application that is difficult to find in the scientific literature so far. This work focuses on comparing the efficiency of the system working with a traditional water-glycol mixture with the same system that uses Al2O3-nanofluid. The results obtained by means of the dynamic simulations have confirmed what theoretically assumed, indicating the working conditions of the HVAC system that lead to lower operating costs and higher COP and EER, guaranteeing the optimal conditions of thermo-hygrometric comfort inside the building. Finally, the results showed that the use of a nanofluid based on water-glycol mixture and alumina increases the efficiency about 10% and at the same time reduces the electrical energy consumption of the HVAC system.

scholarly journals 3D Printing of High Viscosity Reinforced Silicone Elastomers

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2239
Author(s):  
Nicholas Rodriguez ◽  
Samantha Ruelas ◽  
Jean-Baptiste Forien ◽  
Nikola Dudukovic ◽  
Josh DeOtte ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
New Technologies ◽  
Three Dimensional ◽  
High Viscosity ◽  
Layer By Layer ◽  
Silicone Elastomers ◽  
Uv Curable ◽  
Octet Truss ◽  
Tunable Mechanical Properties

Recent advances in additive manufacturing, specifically direct ink writing (DIW) and ink-jetting, have enabled the production of elastomeric silicone parts with deterministic control over the structure, shape, and mechanical properties. These new technologies offer rapid prototyping advantages and find applications in various fields, including biomedical devices, prosthetics, metamaterials, and soft robotics. Stereolithography (SLA) is a complementary approach with the ability to print with finer features and potentially higher throughput. However, all high-performance silicone elastomers are composites of polysiloxane networks reinforced with particulate filler, and consequently, silicone resins tend to have high viscosities (gel- or paste-like), which complicates or completely inhibits the layer-by-layer recoating process central to most SLA technologies. Herein, the design and build of a digital light projection SLA printer suitable for handling high-viscosity resins is demonstrated. Further, a series of UV-curable silicone resins with thiol-ene crosslinking and reinforced by a combination of fumed silica and MQ resins are also described. The resulting silicone elastomers are shown to have tunable mechanical properties, with 100–350% elongation and ultimate tensile strength from 1 to 2.5 MPa. Three-dimensional printed features of 0.4 mm were achieved, and complexity is demonstrated by octet-truss lattices that display negative stiffness.

scholarly journals Ship Handling in Unprotected Waters: A Review of New Technologies in Escort Tugs to Improve Safety

2021 ◽  
Vol 2 (1) ◽  
pp. 46-62
Author(s):  
Santiago Iglesias-Baniela ◽  
Juan Vinagre-Ríos ◽  
José M. Pérez-Canosa
Keyword(s):  
High Performance ◽  
New Technologies ◽  
Weather Conditions ◽  
Hull Form ◽  
Best Available Technologies ◽  
Adverse Weather Conditions ◽  
Adverse Weather ◽  
New Type ◽  
Technological Challenge ◽  
And Performance

It is a well-known fact that the 1989 Exxon Valdez disaster caused the escort towing of laden tankers in many coastal areas of the world to become compulsory. In order to implement a new type of escort towing, specially designed to be employed in very adverse weather conditions, considerable changes in the hull form of escort tugs had to be made to improve their stability and performance. Since traditional winch and ropes technologies were only effective in calm waters, tugs had to be fitted with new devices. These improvements allowed the remodeled tugs to counterbalance the strong forces generated by the maneuvers in open waters. The aim of this paper is to perform a comprehensive literature review of the new high-performance automatic dynamic winches. Furthermore, a thorough analysis of the best available technologies regarding towline, essential to properly exploit the new winches, will be carried out. Through this review, the way in which the escort towing industry has faced this technological challenge is shown.

Sign in / Sign up

Export Citation Format

Share Document