scholarly journals Online SOC Estimation Based on Simplified Electrochemical Model for Lithium-Ion Batteries Considering Current Bias

Energies ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 5265
Author(s):  
Longxing Wu ◽  
Kai Liu ◽  
Hui Pang ◽  
Jiamin Jin
Keyword(s):  
Lithium Ion Batteries ◽  
Lithium Ion ◽  
Operating Conditions ◽  
Estimation Methods ◽  
Current Sensor ◽  
Battery Management System ◽  
Battery Management ◽  
Soc Estimation ◽  
Electrochemical Model ◽  
The Impact

State of Charge (SOC) is essential for a smart Battery Management System (BMS). Traditional SOC estimation methods of lithium-ion batteries are usually conducted using battery equivalent circuit models (ECMs) and the impact of current sensor bias on SOC estimation is rarely considered. For this reason, this paper proposes an online SOC estimation based on a simplified electrochemical model (EM) for lithium-ion batteries considering sensor bias. In EM-based SOC estimation structure, the errors from the current sensor bias are addressed by proportional–integral observer. Then, the accuracy of the proposed EM-based SOC estimation is validated under different operating conditions. The results indicate that the proposed method has good performance and high accuracy in SOC estimation for lithium-ion batteries, which facilitates the on-board application in advanced BMS.

scholarly journals Towards a Smarter Battery Management System for Electric Vehicle Applications: A Critical Review of Lithium-Ion Battery State of Charge Estimation

Energies ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 446 ◽  
Author(s):  
Muhammad Umair Ali ◽  
Amad Zafar ◽  
Sarvar Hussain Nengroo ◽  
Sadam Hussain ◽  
Muhammad Junaid Alvi ◽  
...  
Keyword(s):  
Electric Vehicle ◽  
Management System ◽  
Lithium Ion ◽  
State Of Charge ◽  
Estimation Methods ◽  
Battery Management System ◽  
Battery Management ◽  
Li Ion Battery ◽  
Soc Estimation ◽  
Li Ion

Energy storage system (ESS) technology is still the logjam for the electric vehicle (EV) industry. Lithium-ion (Li-ion) batteries have attracted considerable attention in the EV industry owing to their high energy density, lifespan, nominal voltage, power density, and cost. In EVs, a smart battery management system (BMS) is one of the essential components; it not only measures the states of battery accurately, but also ensures safe operation and prolongs the battery life. The accurate estimation of the state of charge (SOC) of a Li-ion battery is a very challenging task because the Li-ion battery is a highly time variant, non-linear, and complex electrochemical system. This paper explains the workings of a Li-ion battery, provides the main features of a smart BMS, and comprehensively reviews its SOC estimation methods. These SOC estimation methods have been classified into four main categories depending on their nature. A critical explanation, including their merits, limitations, and their estimation errors from other studies, is provided. Some recommendations depending on the development of technology are suggested to improve the online estimation.

scholarly journals Effect of Sensors Sensitivity on Lithium-Ion Battery Modeled Parameters and State of Charge: A Comparative Study

Electronics ◽  
2019 ◽  
Vol 8 (6) ◽  
pp. 709 ◽  
Author(s):  
Muhammad Umair Ali ◽  
Amad Zafar ◽  
Sarvar Hussain Nengroo ◽  
Sadam Hussain ◽  
Hee-Je Kim
Keyword(s):  
Lithium Ion ◽  
State Of Charge ◽  
Current Sensor ◽  
Accurate Estimation ◽  
Battery Management System ◽  
Battery Management ◽  
Soc Estimation ◽  
Optimal Value ◽  
Current Transducer ◽  
Research Outcome

The accurate estimation of the state of charge (SOC) is usually acknowledged as one of the essential features in designing of battery management system (BMS) for the lithium-ion batteries (LIBs) in electric vehicles (EVs). A suitable battery model is a prerequisite for correct SOC measurement. In this work, the first and second order RC autoregressive exogenous (ARX) battery models are adopted to check the influence of voltage and current transducer measurement uncertainty. The Lagrange multiplier method is used to estimate the battery parameters. The sensitivity analysis is performed under the following conditions: Current sensor precision of ±5 mA, ±50 mA, ±100 mA, and ±500 mA and voltage sensor precision of ±1 mV, ±2.5 mV, ±5 mV, and ±10mV. The comparative analysis of both models under the perturbed environment has been carried out. The effects of the sensor’s sensitivity on the different battery structures and complexity are also analyzed. Results shows that the voltage and current sensor sensitivity has a significant influence on SOC estimation. This research outcome assists the researcher in selecting the optimal value of sensor accuracy to accurately estimate the SOC of the LIB.

State of charge estimation for lithium-ion batteries using dynamic neural network based on sine cosine algorithm

2021 ◽  
pp. 095440702110180
Author(s):  
Meng Wei ◽  
Min Ye ◽  
Jia Bo Li ◽  
Qiao Wang ◽  
Xin Xin Xu
Keyword(s):  
Neural Network ◽  
Lithium Ion Batteries ◽  
Unscented Kalman Filter ◽  
Lithium Ion ◽  
State Of Charge ◽  
Support Vector ◽  
Battery Management System ◽  
Dynamic Neural Network ◽  
Soc Estimation ◽  
Sine Cosine Algorithm

State of charge (SOC) of the lithium-ion batteries is one of the key parameters of the battery management system, which the performance of SOC estimation guarantees energy management efficiency and endurance mileage of electric vehicles. However, accurate SOC estimation is a difficult problem owing to complex chemical reactions and nonlinear battery characteristics. In this paper, the method of the dynamic neural network is used to estimate the SOC of the lithium-ion batteries, which is improved based on the classic close-loop nonlinear auto-regressive models with exogenous input neural network (NARXNN) model, and the open-loop NARXNN model considering expected output is proposed. Since the input delay, feedback delay, and hidden layer of the dynamic neural network are usually selected by empirically, which affects the estimation performance of the dynamic neural network. To cover this weakness, sine cosine algorithm (SCA) is used for global optimal dynamic neural network parameters. Then, the experimental results are verified to obtain the effectiveness and robustness of the proposed method under different conditions. Finally, the dynamic neural network based on SCA is compared with unscented Kalman filter (UKF), back propagation neural network based on particle swarm optimization (BPNN-PSO), least-squares support vector machine (LS-SVM), and Gaussian process regression (GPR), the results show that the proposed dynamic neural network based on SCA is superior to other methods.

scholarly journals A Fractional-Order Kinetic Battery Model of Lithium-Ion Batteries Considering a Nonlinear Capacity

Electronics ◽  
2019 ◽  
Vol 8 (4) ◽  
pp. 394 ◽  
Author(s):  
Qi Zhang ◽  
Yan Li ◽  
Yunlong Shang ◽  
Bin Duan ◽  
Naxin Cui ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Fractional Order ◽  
Lithium Ion ◽  
Absolute Error ◽  
Battery Management System ◽  
Order Kinetic ◽  
Battery Management ◽  
Nonlinear Capacity ◽  
Battery Model ◽  
Parameter Identifications

Accurate battery models are integral to the battery management system and safe operation of electric vehicles. Few investigations have been conducted on the influence of current rate (C-rate) on the available capacity of the battery, for example, the kinetic battery model (KiBaM). However, the nonlinear characteristics of lithium-ion batteries (LIBs) are closer to a fractional-order dynamic system because of their electrochemical materials and properties. The application of fractional-order models to represent physical systems is timely and interesting. In this paper, a novel fractional-order KiBaM (FO-KiBaM) is proposed. The available capacity of a ternary LIB module is tested at different C-rates, and its parameter identifications are achieved by the experimental data. The results showed that the estimated errors of available capacity in the proposed FO-KiBaM were low over a wide applied current range, specifically, the mean absolute error was only 1.91%.

scholarly journals Online State of Charge Estimation for Lithium-Ion Battery by Combining Incremental Autoregressive and Moving Average Modeling with Adaptive H-Infinity Filter

2018 ◽  
Vol 2018 ◽  
pp. 1-16 ◽  
Author(s):  
Zheng Liu ◽  
Xuanju Dang ◽  
Hanxu Sun
Keyword(s):  
Moving Average ◽  
Equivalent Circuit Model ◽  
Lithium Ion ◽  
State Of Charge ◽  
Parameters Identification ◽  
Estimation Methods ◽  
Model Parameters ◽  
Battery Management System ◽  
H Infinity ◽  
Soc Estimation

The state of charge (SOC) estimation is one of the most important features in battery management system (BMS) for electric vehicles (EVs). In this article, a novel equivalent-circuit model (ECM) with an extra noise sequence is proposed to reduce the adverse effect of model error. Model parameters identification method with variable forgetting factor recursive extended least squares (VFFRELS), which combines a constructed incremental autoregressive and moving average (IARMA) model with differential measurement variables, is presented to obtain the ECM parameters. The independent open circuit voltage (OCV) estimator with error compensation factors is designed to reduce the OCV error of OCV fitting model. Based on the IARMA battery model analysis and the parameters identification, an SOC estimator by adaptive H-infinity filter (AHIF) is formulated. The adaptive strategy of the AHIF improves the numerical stability and robust performance by synchronous adjusting noise covariance and restricted factor. The results of experiment and simulation have verified that the proposed approach has superior advantage of parameters identification and SOC estimation to other estimation methods.

A Design Methodology for Lithium-Ion Battery Management System and its Application to an Autonomous Underwater Vehicle

2011 ◽  
Vol 383-390 ◽  
pp. 7175-7182 ◽  
Author(s):  
Chao Shen ◽  
Lei Wan
Keyword(s):  
Management System ◽  
Autonomous Underwater Vehicle ◽  
Lithium Ion ◽  
Underwater Vehicle ◽  
Battery Management System ◽  
Battery Management ◽  
Soc Estimation ◽  
Battery Packs ◽  
Non Linear System ◽  
Estimated Error

Battery management system (BMS) in autonomous underwater vehicle (AUV) not only can measure the main parameters of battery packs such as current, voltage, and temperature, but also estimate the state of charge (SOC) of battery packs. This paper proposes a broad approach for the design of battery management system. The new design can improve the cycle life and safety capability. With the model well designed, the parameters required are obtained and the SOC estimation is completed. Extended Kalman filter (EKF) was chosen to make the last estimate with the reliable battery model which was used to the non-linear system to estimate SOC and suitable for AUV applications. The experiments results prove that the data measured by battery management system have high precision and reliability. The estimated error of SOC was also small, which was better than other approaches for estimate.

scholarly journals State-of-Charge Estimation of Lithium-Ion Battery Based on Extended Kalman Filter Algorithm

2020 ◽  
pp. 420-437
Author(s):  
Wu Xiaogang ◽  
Xuefeng Li ◽  
Nikolay I. Shurov ◽  
Alexander A. Shtang ◽  
Michael V. Yaroslavtsev ◽  
...  
Keyword(s):  
Kalman Filter ◽  
Lithium Ion Battery ◽  
Electric Vehicle ◽  
Extended Kalman Filter ◽  
Lithium Ion ◽  
Operating Conditions ◽  
State Of Charge ◽  
Battery Management ◽  
Soc Estimation ◽  
Ternary Polymer

As the core component of electric vehicle, lithium-ion battery needs to adopt effective battery management method to prolong battery life and improve the reliability and safety. The accurate estimation of the battery SOC can be used to prevent the battery over charge and over discharge, reduce damage to the battery and improve battery performance, which plays a vital role in the battery management system. The study of battery SOC estimation mainly focused on the battery model construction and SOC estimation algorithm. Aiming at the problem that the state of charge (SOC) of electric vehicle is difficult to be accurately estimated under complex operating conditions, based on the parameter identification of the equivalent circuit of a ternary polymer lithium-ion battery, an Extended Kalman Filter (EKF) algorithm was used to estimate the SOC of the ternary polymer lithium-ion battery. Simulation and experimental results show that the estimation of SOC can be carried out by using the EKF algorithm under the conditions of China Passenger Car Condition (Chinacar) and new European driving cycle (NEDC) Compared with the coulomb counting method, the average error of SOC estimation can be realized is 1.042% and 1.138% respectively, the maximum error within 4%. Application of this algorithm to achieve SOC estimation has good robustness and convergence

scholarly journals Online SoC Estimation of Lithium-Ion Batteries Using a New Sigma Points Kalman Filter

2021 ◽  
Vol 11 (24) ◽  
pp. 11797
Author(s):  
Dongdong Ge ◽  
Zhendong Zhang ◽  
Xiangdong Kong ◽  
Zhiping Wan
Keyword(s):  
Kalman Filter ◽  
Lithium Ion Batteries ◽  
Unscented Kalman Filter ◽  
Stress Test ◽  
Estimation Method ◽  
Lithium Ion ◽  
Operating Conditions ◽  
Recursive Least Squares ◽  
Primary Concern ◽  
Soc Estimation

The accurate state of charge (SoC) online estimation for lithium-ion batteries is a primary concern for predicting the remaining range in electric vehicles. The Sigma points Kalman Filter is an emerging SoC filtering technology. Firstly, the charge and discharge tests of the battery were carried out using the interval static method to obtain the accurate calibration of the SoC-OCV (open circuit voltage) relationship curve. Secondly, the recursive least squares method (RLS) was combined with the dynamic stress test (DST) to identify the parameters of the second-order equivalent circuit model (ECM) and establish a non-linear state-space model of the lithium-ion battery. Thirdly, based on proportional correction sampling and symmetric sampling Sigma points, an SoC estimation method combining unscented transformation and Stirling interpolation center difference was designed. Finally, a semi-physical simulation platform was built. The Federal Urban Driving Schedule and US06 Highway Driving Schedule operating conditions were used to verify the effectiveness of the proposed estimation method in the presence of initial SoC errors and compare with the EKF (extended Kalman filter), UKF (unscented Kalman filter) and CDKF (central difference Kalman filter) algorithms. The results showed that the new algorithm could ensure an SoC error within 2% under the two working conditions and quickly converge to the reference value when the initial SoC value was inaccurate, effectively improving the initial error correction ability.

Sign in / Sign up

Export Citation Format

Share Document