scholarly journals Renewable Energy Sector in Bangladesh: The Current Scenario, Challenges and the Role of IoT in Building a Smart Distribution Grid

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 5083
Author(s):  
Abdul Hasib Siddique ◽  
Sumaiya Tasnim ◽  
Fahim Shahriyar ◽  
Mehedi Hasan ◽  
Khalid Rashid
Keyword(s):  
Renewable Energy ◽  
Energy Demand ◽  
Energy Requirement ◽  
Economic Status ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Renewable Energy Resources ◽  
Distribution Grid ◽  
Sustainable Solutions ◽  
Smart Distribution Grid

Advancement in electricity is the key ingredient that can actively take part in alleviating poverty and drastically improve the socio-economic status of the people of Bangladesh. The incorporation of renewable energy sources would help the country meet the energy requirement as well as contribute positively towards building a sustainable planet. The paper has extensively discussed the potential aspects of renewable energy resources in Bangladesh and how the Internet of Things can facilitate the implementation of intermittent sources. The regulatory and socio-economic aspects of the renewable energy industry have been explored and sustainable solutions will be discussed to fast-track the process of integrating various renewable energy sources in the power grid to meet the energy demand. The paper discusses the challenges associated with the RE integration in Bangladesh’s power mix and tries to mitigate it through the IoT. Besides that, an RE map for Bangladesh along with prospective power network has also been discussed in this work.

scholarly journals Turkey’s 2023 Energy Strategies and Investment Opportunities for Renewable Energy Sources: Site Selection Based on ELECTRE

2019 ◽  
Vol 11 (7) ◽  
pp. 2136 ◽  
Author(s):  
Ceren Erdin ◽  
Gokhan Ozkaya
Keyword(s):  
Renewable Energy ◽  
Site Selection ◽  
Energy Demand ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Renewable Energy Resources ◽  
Energy Potential ◽  
Turkish Government ◽  
The Government ◽  
Installed Capacity

In Turkey, current energy generations are not sufficient for the existing energy needs and besides, energy demand is expected to increase by 4–6 percent annually until 2023. Therefore, the government aims to increase the ratio of renewable energy resources (RES) in total installed capacity to 30 percent by 2023. By this date, total energy investments are expected to be approximately $110 billion. Turkey is the fastest growing energy market among the OECD countries. Therefore, Turkey is an attractive market for energy companies and investors. At this stage, site selection and deciding appropriate RES are the most important feasibility parameters for investment. In this study, “Site Selection in Turkey” issue for RES (solar, wind, hydroelectric, geothermal, biomass) is evaluated by the ELECTRE which is one of the Multi Criteria Decision Making (MCDM) methods. In addition, the reasons for choosing this method are explained according to the literature. The study emphasizes the importance of energy generation from renewable and sustainable sources and is concerned with improving the position of the country. The Turkish government offers many purchasing guarantees and high incentives, especially in the renewable energy sector. As a result of the analysis, the most suitable energy sources are presented according to the geography and energy potential of the regions. The study aims to inform energy firms and everyone related with RES about Turkey’s RES opportunities.

scholarly journals RENEWABLE ENERGY SOURCES AND ANALYZING THE WIND TURBINE PERFORMANCE; A REVIEW

2016 ◽  
Vol 38 (2) ◽  
pp. 780
Author(s):  
Erfan Shamsaddini Lori ◽  
Zulkiflle Leman
Keyword(s):  
Renewable Energy ◽  
Energy Demand ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Service Needs ◽  
Renewable Energy Resources ◽  
Turbine Performance ◽  
Job Opportunities ◽  
Energy Service

The potential of renewable energy resources has been investigated and its is shown that they can in fact fulfill most of the world’s energy demand. In this study renewable energy sources such as biomass, solar, wind, geothermal and hydropower are studied and provided with sustainable energy services, based on the available natural resources. In the past three decades wind and solar power system have developed rapidly in sales, while there was a decline in their capital cost and costs of electricity generated. This study shows that the transition to renewable –based energy systems are increasing and continues to improve their performance characteristic. The enhancement and utilization of renewable energy sources can increase diversity in energy supply market, help to secure long term supportable energy supplies, keeping the environment clean by reducing local and global atmospheric emissions, establish marvelous options too encounter specific energy service needs by helping to create new job opportunities especially in developing countries.

scholarly journals Spatial Analysis of Renewable Energy Sources

2021 ◽  
Vol 25 (1) ◽  
pp. 865-878
Author(s):  
Marika Kacare ◽  
Ieva Pakere ◽  
Armands Grāvelsiņš ◽  
Dagnija Blumberga
Keyword(s):  
Spatial Distribution ◽  
Renewable Energy ◽  
Energy Demand ◽  
Industrial Development ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Renewable Energy Resources ◽  
Use Of Resources ◽  
Eu Directive

Abstract Renewable energy sources are expanding opportunities for industrial development and can boost economic growth and create new jobs. In all European Union (EU) countries, including Latvia, it is possible to use renewable energy resources cost-effectively. The world is now at the beginning of the global energy transformation. Cost-effective renewable energy technologies provided an opportunity for sufficient development to reach ambitious climate targets of the EU Directive 2009/28/EC. Some systems are not only dependent on the interaction of many elements and dynamics over time, but they are also variable in space. In this context, energy production from local and renewable resources is one of the most relevant examples. It is characterized by many spatially variable elements, such as biomass availability, wind speed, solar radiation, location of power plants, transmission network infrastructure, energy demand, etc. It is crucial to explore the spatial distribution of resources to plan territorially-unified development of renewable energy and, consequently, promote efficient use of resources. This paper describes the data acquisition process of the spatial distribution of renewable energy sources. ArcGIS PRO and data collected from the various databases were used to describe the energy sectors according to resources, spheres of consumption and regions.

scholarly journals Progresses in Analytical Design of Distribution Grids and Energy Storage

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4270
Author(s):  
Gianpiero Colangelo ◽  
Gianluigi Spirto ◽  
Marco Milanese ◽  
Arturo de Risi
Keyword(s):  
Renewable Energy ◽  
Power Flow ◽  
State Of The Art ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Distribution Grid ◽  
Mathematical Methods ◽  
Power Generators ◽  
Bidirectional Power Flow ◽  
Distribution Grids

In the last years, a change in the power generation paradigm has been promoted by the increasing use of renewable energy sources combined with the need to reduce CO2 emissions. Small and distributed power generators are preferred to the classical centralized and sizeable ones. Accordingly, this fact led to a new way to think and design distributions grids. One of the challenges is to handle bidirectional power flow at the distribution substations transformer from and to the national transportation grid. The aim of this paper is to review and analyze the different mathematical methods to design the architecture of a distribution grid and the state of the art of the technologies used to produce and eventually store or convert, in different energy carriers, electricity produced by renewable energy sources, coping with the aleatory of these sources.

scholarly journals Scalable Multiport Converter Structure for Easy Grid Integration of Alternate Energy Sources for Generation of Isolated Voltage Sources for MMC

Electronics ◽  
2021 ◽  
Vol 10 (15) ◽  
pp. 1779
Author(s):  
Syed Rahman ◽  
Irfan Khan ◽  
Khaliqur Rahman ◽  
Sattam Al Otaibi ◽  
Hend I. Alkhammash ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Renewable Energy Sources ◽  
Energy Resources ◽  
Energy Sources ◽  
Renewable Energy Resources ◽  
Component Level ◽  
Storage Devices ◽  
Multiport Converter ◽  
Detailed Simulation ◽  
The Individual

This paper presents a novel, scalable, and modular multiport power electronic topology for the integration of multiple resources. This converter is not only scalable in terms of the integration of multiple renewable energy resources (RES) and storage devices (SDs) but is also scalable in terms of output ports. Multiple dc outputs of a converter are designed to serve as input to the stacking modules (SMs) of the modular multilevel converter (MMC). The proposed multiport converter is bidirectional in nature and superior in terms of functionality in a way that a modular universal converter is responsible for the integration of multiple RES/SDs and regulates multiple dc output ports for SMs of MMC. All input ports can be easily integrated (and controlled), and output ports also can be controlled independently in response to any load variations. An isolated active half-bridge converter with multiple secondaries acts as a central hub for power processing with multiple renewable energy resources that are integrated at the primary side. To verify the proposed converter, a detailed design of the converter-based system is presented along with the proposed control algorithm for managing power on the individual component level. Additionally, different modes of power management (emulating the availability/variability of renewable energy sources (RES)) are exhibited and analyzed here. Finally, detailed simulation results are presented in detail for the validation of the proposed concepts and design process.

Modelling of an Optimized Microgrid Model by Integrating DG Distributed Generation Sources to IEEE 13 Bus System

2021 ◽  
Vol 5 (2) ◽  
pp. 18-25
Author(s):  
Bisma Imtiaz ◽  
Imran Zafar ◽  
Cui Yuanhui
Keyword(s):  
Renewable Energy ◽  
Distributed Generation ◽  
Energy Demand ◽  
High Reliability ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Efficient Manner ◽  
Matlab Simulink ◽  
Control Scheme ◽  
Power Quality Improvement

Due to the rapid increase in energy demand with depleting conventional sources, the world’s interest is moving towards renewable energy sources. Microgrid provides easy and reliable integration of distributed generation (DG) units based on renewable energy sources to the grid. The DG’s are usually integrated to microgrid through inverters. For a reliable operation of microgrid, it must have to operate in grid connected as well as isolated mode. Due to sudden mode change, performance of the DG inverter system will be compromised. Design and simulation of an optimized microgrid model in MATLAB/Simulink is presented in this work. The goal of the designed model is to integrate the inverter-interfaced DG’s to the microgrid in an efficient manner. The IEEE 13 bus test feeder has been converted to a microgrid by integration of DG’s including diesel engine generator, photovoltaic (PV) block and battery. The main feature of the designed MG model is its optimization in both operated modes to ensure the high reliability. For reliable interconnection of designed MG model to the power grid, a control scheme for DG inverter system based on PI controllers and DQ-PLL (phase-locked loop) has been designed. This designed scheme provides constant voltage in isolated mode and constant currents in grid connected mode. For power quality improvement, the regulation of harmonic current insertion has been performed using LCL filter. The performance of the designed MG model has been evaluated from the simulation results in MATLAB/ Simulink.

scholarly journals TECHNO-ECONOMIC ANALYSIS OF AN OFF-GRID HYBRID ENERGY SYSTEM WITH HOMER PRO

2021 ◽  
Vol 5 (3) ◽  
pp. 56-61
Author(s):  
Ahmet Erhan AKAN
Keyword(s):  
Renewable Energy ◽  
Solar Energy ◽  
Economic Analysis ◽  
Energy Conversion ◽  
Renewable Energy Sources ◽  
Lithium Ion ◽  
Energy Sources ◽  
Renewable Energy Resources ◽  
Energy Potential ◽  
Economic Point

The decrease in fossil-based energy sources and increasing environmental problems increase the tendency to renewable energy sources day by day. The potential of renewable energy sources differs according to the region where the energy will be produced. For this reason, it is crucial to conduct a good feasibility study that deals with the selected systems from a technical and economic point of view before making an investment decision on energy conversion systems based on renewable energy sources. In this study, the most suitable equipment and capacities were investigated by examining the techno-economic analysis of a hybrid system created with wind-solar renewable energies for a detached house, which is considered off-grid, in a rural area of Tekirdağ province (40o58.7ı N, 27o30.7ı E). Investigations were carried out using the HOMER Pro (Hybrid Optimization Model for Electric Renewable) program. The wind and solar energy potential of Tekirdağ province were obtained from the NASA renewable energy resources database added to the HOMER Pro program. The daily electricity requirement of the sample house was chosen as 11.27 kWh, and the current peak electrical load was chosen as 2.39 kW. A wind turbine is connected to the AC busbars, solar collectors and battery group connected to the DC busbars, and a converter that converts energy between AC and DC busbars in the energy conversion system. In order to determine the optimum capacities of the system elements, 27486 different simulations were performed by HOMER Pro. The selection of the most suitable system among these was determined according to the lowest net present cost (NPC) value. In addition, the energy production capacities that will occur in the case of different wind speeds were also investigated. Accordingly, the system to be installed with a solar panel with a capacity of 6.25 kW, PV-MPPT with a capacity of 1 kW, 2 wind turbines with a capacity of 1 kW, 8 Lithium-ion batteries with a capacity of 6V-167 Ah, and a converter with a capacity of 2.5 kW has been determined will generate electrical energy of 5433 kWh per year. In addition, it has been determined that 61.8% of this produced energy will be obtained from solar energy and 38.2% from wind energy, and the simple payback period of the investment will be 14 years. It is thought that this study will provide valuable information to researchers and investors.

Selection of Renewable Energy Sources for Buildings

2018 ◽  
pp. 69-97
Author(s):  
Hanna Irena Jędrzejuk
Keyword(s):  
Renewable Energy ◽  
Energy Demand ◽  
Renewable Energy Sources ◽  
Short Review ◽  
Biomass Energy ◽  
Energy Sources ◽  
Legal Regulations ◽  
Zero Energy Building ◽  
Standard Application ◽  
Technical Systems

This chapter describes a general issue of selecting renewable energy sources (RES) and technical systems. To achieve the nearly zero-energy building (nZEB) standard, application of an RES (e.g., solar, wind, geothermal, hydropower, and biomass energy) is necessary. Each type of RES has specific characteristics and can be used to produce electricity and/or heat in certain systems. A short review of various systems using renewable energy sources is presented. To find the required and satisfactory solution that guaranties meeting the nZEB standard, an analysis must be carried out considering a number of aspects: local availability, structure and time-dependence of energy demand, building construction, economic conditions, legal regulations, and specific requirements. Finally, two examples of modernisation towards the nZEB standard are included.

scholarly journals Replacing Fossil Fuels and Nuclear Power with Renewable Energy: Utopia or Valid Option? A Swiss Case Study of Bioenergy

Energies ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 2051 ◽  
Author(s):  
Renato Lemm ◽  
Raphael Haymoz ◽  
Astrid Björnsen Gurung ◽  
Vanessa Burg ◽  
Tom Strebel ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Energy Demand ◽  
Renewable Energy Sources ◽  
Regional Scale ◽  
Energy Sources ◽  
Potential Contribution ◽  
Swiss Canton ◽  
Future System ◽  
Conversion Technologies ◽  
The Impact

The transition towards a reliable, sustainable, low-carbon energy system is a major challenge of the 21st century. Due to the lower energy density of many renewable energy sources, a future system is expected to be more decentralized, leading to significant changes at the regional scale. This study analyzes the feasibility of the energy transition in the Swiss canton of Aargau as an illustrative example and explores different strategies to satisfy the local demand for electricity, heat, and fuel by 2035. In particular, we assess the potential contribution of biomass. Four scenarios demonstrate what energy demand proportion could be covered by bioenergy if different priorities were given to the provision of heat, electricity, and fuel. The impact of improved conversion technologies is also considered. The results show that the sustainably available renewable energy sources in canton Aargau will probably not be sufficient to cover its forecasted energy demand in 2035, neither with present nor future biomass conversion technologies. At best, 74% of the energy demand could be met by renewables. Biomass can increase the degree of autarky by a maximum of 13%. Depending on the scenario, at least 26–43% (2500–5700 GWh) of total energy demand is lacking, particularly for mobility purposes.

Sign in / Sign up

Export Citation Format

Share Document