scholarly journals A Scoping Review of Renewable Energy, Sustainability and the Environment

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4490
Author(s):  
Svitlana Kolosok ◽  
Yuriy Bilan ◽  
Tetiana Vasylieva ◽  
Adam Wojciechowski ◽  
Michał Morawski

The article aims to identify the latest trends in research on renewable energy, sustainability and the environment. A total of 92,873 publications from 123 Scopus sources for 2020–2021 are compared using the scoping review method. The results show that the most cited works in this sample are those by authors from the Asian region. The research of these authors focuses on the security, efficiency and reliability of separate elements in energy systems. Besides, the paper considers the problems regarding COVID disease along with the renewable energy sources, perovskite and organic solar panels, nanostructured materials and high energy density. Finally, the paper analyses applications of computer science methods in research on renewable energy, sustainability and the environment. The findings evidently show that recent advancements in computer science methods were not extensively used in the discussed research domain and give a great room for novel strategies of prognosing, simulation and processes optimisation.

Energies ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 5347 ◽  
Author(s):  
Andrea Pietra ◽  
Marco Gianni ◽  
Nicola Zuliani ◽  
Stefano Malabotti ◽  
Rodolfo Taccani

Storing renewable energy in chemicals, like hydrogen, can bring various benefits like high energy density, seasonal storability, possible cost reduction of the final product, and the potential to let renewable power penetrate other markets and to overcome their intermittent availability. In the last year’s production of this gas from renewable energy sources via electrolysis has grown its reputation as one feasible solution to satisfy future zero-emission energy demand. To extend the exploitation of Renewable Energy Source (RES), small-scale conversion plants seem to be an interesting option. In view of a possible widespread adoption of these types of plants, the authors intend to present the experimental characterization of a small-scale hydrogen production and storage plant. The considered experimental plant is based on an alkaline electrolyser and an air-driven hydrogen compression and storage system. The results show that the hydrogen production-specific consumption is, on average, 77 kWh/kgH2. The hydrogen compressor energy requirement is, on average, 15 kWh/kgH2 (data referred to the driving compressed air). The value is higher than data found in literature (4.4–9.3 kWh/kgH2), but the difference can be attributed to the small size of the considered compressor and the choice to limit the compression stages.


2021 ◽  
Author(s):  
Luboslav Straka ◽  
Tibor Krenicky

In recent years, there has been an increased emphasis worldwide on the quality of the environment, especially with an orientation towards the application of renewable energy sources. In addition, we are increasingly encountering experimentation aimed at obtaining new green energy sources. One of such sources is biomass. Biomass has been used since the middle ages as a source of heat and light energy. Today, however, we have technologies that allow us to obtain not only heat but also electricity from biomass, or to convert biomass into materials with high energy density and purity. The energy thus transformed can then be used, for example, as a propellant. At the same time, this valuable source of clean energy can be easily transported to the place of consumption. By applying biomass as a source of green energy, we can make a significant contribution to relieving the environment from harmful effects. In recent years, an increased interest in energy obtained from biomass can be observed in Slovakia. Its technical potential is the greatest among other renewable energy sources, and its non-use would essentially be wastage. Therefore, the aim of the paper was to describe two possibilities of transformation of biomass in the form of its energy recovery into the type of energy used for the production of mechanical, thermal and electrical energy. At the same time, in addition to obtaining a suitable form of energy from biomass, another environmental benefit was sought in the form of soil decontamination. In this regard, there is an energetically important crop, which is known under the Latin name Amaranthus caudatus. It is an energy crop that can be grown on slightly contaminated soil with some restrictions. Two methods of energy recovery of this crop were compared. In the first case it was its compaction into briquettes, in the second case it was a process of anaerobic fermentation with subsequent production of biogas. Based on the performed analysis, it was found that these are almost equivalent energy sources. Although both methods of transformation and energy recovery of the green part of Amaranthus caudatus crops have a number of advantages and disadvantages, it can be clearly stated that the positives significantly outweigh the negatives. Therefore, it is recommended to apply this crop as a valuable source of energy for use in real conditions.


RSC Advances ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 5432-5443
Author(s):  
Shyam K. Pahari ◽  
Tugba Ceren Gokoglan ◽  
Benjoe Rey B. Visayas ◽  
Jennifer Woehl ◽  
James A. Golen ◽  
...  

With the cost of renewable energy near parity with fossil fuels, energy storage is paramount. We report a breakthrough on a bioinspired NRFB active-material, with greatly improved solubility, and place it in a predictive theoretical framework.


Nanoscale ◽  
2021 ◽  
Author(s):  
Woong Choi ◽  
Joon Woo Park ◽  
Woonghyeon Park ◽  
Yousung Jung ◽  
Hyunjoon Song

Electrochemical CO2 reduction reaction (eCO2RR) has been considered one of the potential technologies to store electricity from renewable energy sources into chemical energy. For this aim, designing catalysts with high...


2018 ◽  
Vol 10 (8) ◽  
pp. 2660 ◽  
Author(s):  
Yi Yuan ◽  
Yingjie Li ◽  
Jianli Zhao

The intermittent and inconsistent nature of some renewable energy, such as solar and wind, means the corresponding plants are unable to operate continuously. Thermochemical energy storage (TES) is an essential way to solve this problem. Due to the advantages of cheap price, high energy density, and ease to scaling, CaO-based material is thought as one of the most promising storage mediums for TES. In this paper, TES based on various cycles, such as CaO/CaCO3 cycles, CaO/Ca(OH)2 cycles, and coupling of CaO/Ca(OH)2 and CaO/CaCO3 cycles, were reviewed. The energy storage performances of CaO-based materials, as well as the modification approaches to improve their performance, were critically reviewed. The natural CaO-based materials for CaO/Ca(OH)2 TES experienced the multiple hydration/dehydration cycles tend to suffer from severe sintering which leads to the low activity and structural stability. It is found that higher dehydration temperature, lower initial sample temperature of the hydration reaction, higher vapor pressure in the hydration reactor, and the use of circulating fluidized bed (CFB) reactors all can improve the energy storage performance of CaO-based materials. In addition, the energy storage performance of CaO-based materials for CaO/Ca(OH)2 TES can be effectively improved by the various modification methods. The additions of Al2O3, Na2Si3O7, and nanoparticles of nano-SiO2 can improve the structural stabilities of CaO-based materials, while the addition of LiOH can improve the reactivities of CaO-based materials. This paper is devoted to a critical review on the development on thermochemical energy storage based on CaO-based materials in the recent years.


2019 ◽  
Vol 1 (1) ◽  
pp. 14
Author(s):  
Rizal Akbarudin Rahman ◽  
Aripriharta Aripriharta ◽  
Hari Putranto

The use of renewable energy as a source of electrical energyincreases every year. Unfortunately, Indonesia does not have manypower plants that utilize renewable energy sources. The mostpotential renewable energy in Indonesia is the sunlight with the helpof solar panels that converts solar energy into electrical energy.However, the environment could affect the solar panel module andin turn, affect the performance of solar panels or the generatedelectric energy. This research calculated the performance of solarpanels with a single-diode model using the Five Parameters methodthat required solar panel module specification data, the totalradiation absorbed by the solar panel module, and the temperatureof the environment. The Five Parameters method is a methodmodeled after solar panel module performance in the form of thesingle-diode equivalent circuit. The Five Parameters method isreliable in predicting the energy produced by the solar panels whenthe input data is limited. The results for using the Five Parametersin monocrystalline solar panels were Isc = 1.827 A, Imp = 0.662 A,Voc = 18.221 V, Vmp = 15.019 V, Pmp = 9.955 W. And the results inpolycrystalline solar panels were Isc = 1.926 A, Imp = 0.686 A, Voc =17.594 V, Vmp = 14.166 V, Pmp = 9.722 W. Based on the results; itwas concluded that the most efficient and optimised types of solarpanels on natural conditions in Sendang Biru Beach was themonocrystalline solar panel because it produced electrical outputpower of 9.955 W. Therefore, there could be a manufacturer ofsolar energy power plants to reduce the cost of electricity in thecoastal area, such as in Sendang Biru Beach.


2015 ◽  
Vol 15 (1) ◽  
pp. 22-33 ◽  
Author(s):  
Saravanan Dhanushkodi ◽  
Vincent H. Wilson ◽  
Kumarasamy Sudhakar

Abstract Cashew nut farming in India is mostly carried out in small and marginal holdings. Energy consumption in the small scale cashew nut processing industry is very high and is mainly due to the high energy consumption of the drying process. The drying operation provides a lot of scope for energy saving and substitutions of other renewable energy sources. Renewable energy-based drying systems with loading capacity of 40 kg were proposed for application in small scale cashew nut processing industries. The main objective of this work is to perform economic feasibility of substituting solar, biomass and hybrid dryer in place of conventional steam drying for cashew drying. Four economic indicators were used to assess the feasibility of three renewable based drying technologies. The payback time was 1.58 yr. for solar, 1.32 for biomass and 1.99 for the hybrid drying system, whereas as the cost-benefit estimates were 5.23 for solar, 4.15 for biomass and 3.32 for the hybrid system. It was found that it is of paramount importance to develop solar biomass hybrid dryer for small scale processing industries.


Author(s):  
Radian Belu

The use of renewable energy sources is increasingly being pursued as a supplemental and an alternative to traditional energy generation. Several distributed energy systems are expected to a have a significant impact on the energy industry in the near future. As such, the renewable energy systems are presently undergoing a rapid change in technology and use. Such a feature is enabled clearly by power electronics. Both the solar-thermal and photovoltaic (PV) technologies have an almost exponential growth in installed capacity and applications. Both of them contribute to the overall grid control and power electronics research and advancement. Among the renewable energy systems, photovoltaic (PV) systems are the ones that make use of an extended scale of the advanced power electronics technologies. The specification of a power electronics interface is subject to the requirements related not only to the renewable energy source itself but also to its effects on the operations of the systems on which it is connected, especially the ones where these intermittent energy sources constitute a significant part of the total system capacity. Power electronics can also play a significant role in enhancing the performance and efficiency of PV systems. Furthermore, the use of appropriate power electronics enables solar generated electricity to be integrated into power grid. Aside from improving the quality of solar panels themselves, power electronics can provide another means of improving energy efficiency in PV and solar-thermal energy systems.


2015 ◽  
pp. 2016-2072
Author(s):  
Radian Belu

The use of renewable energy sources is increasingly being pursued as a supplemental and an alternative to traditional energy generation. Several distributed energy systems are expected to a have a significant impact on the energy industry in the near future. As such, the renewable energy systems are presently undergoing a rapid change in technology and use. Such a feature is enabled clearly by power electronics. Both the solar-thermal and photovoltaic (PV) technologies have an almost exponential growth in installed capacity and applications. Both of them contribute to the overall grid control and power electronics research and advancement. Among the renewable energy systems, photovoltaic (PV) systems are the ones that make use of an extended scale of the advanced power electronics technologies. The specification of a power electronics interface is subject to the requirements related not only to the renewable energy source itself but also to its effects on the operations of the systems on which it is connected, especially the ones where these intermittent energy sources constitute a significant part of the total system capacity. Power electronics can also play a significant role in enhancing the performance and efficiency of PV systems. Furthermore, the use of appropriate power electronics enables solar generated electricity to be integrated into power grid. Aside from improving the quality of solar panels themselves, power electronics can provide another means of improving energy efficiency in PV and solar-thermal energy systems.


Sign in / Sign up

Export Citation Format

Share Document