scholarly journals The Usage of UCG Technology as Alternative to Reach Low-Carbon Energy

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3718
Author(s):  
Stefan Zelenak ◽  
Erika Skvarekova ◽  
Andrea Senova ◽  
Gabriel Wittenberger

Countries of the European Union have stated transition to carbon-neutral economy until the year of 2050. Countries with a higher share of coal-fired power generation currently have no solution to end their combustion and use clean, emission-free energy immediately. The solution to this problem in the energy industry appears to be the increased use of natural gas, which significantly reduces CO2 emissions. In this article, we investigated the possibility of using coal in situ, using UCG (underground coal gasification) technology. We focused on verified geological, hydrogeological, and tectonic information about the selected brown coal deposit in Slovakia. This information has been assessed in research projects in recent years at the Technical University. From the abovementioned information, possible adverse factors were evaluated. These factors affect the rock environment around the underground generator by UCG activity. As part of the process management, measures were proposed to eliminate the occurrence of pollution and adverse effects on the environment. In the final phase of the UCG technology, we proposed to carry out, in the boreholes and in the generator cavity, water flushing and subsequent grouting. The proposed are suitable materials for solidification and stabilization. Results of this article´s solutions are crucial in the case of usage of this so-called clean technology, not only in Slovakia but also worldwide.

2013 ◽  
Vol 40 ◽  
pp. 212-221 ◽  
Author(s):  
Natalie Nakaten ◽  
Philipp Kötting ◽  
Rafig Azzam ◽  
Thomas Kempka

2013 ◽  
Vol 22 (35) ◽  
pp. 9
Author(s):  
John William Rosso Murillo

<p>In situ coal gasification technology (Underground Coal Gasification–UCG–) is an alternative to the traditional exploitation, due to it allows to reach the today’s inaccessible coal reserves’ recovery, to conventional mining technologies. In this article I answer the question on how the today’s reserves available volume, can be increased, given the possibility to exploit further and better the same resources. Mining is an important wealth resource in Colombia as a contributor to the national GDP. According with the Energy Ministry (Ministerio de Minas y Energía) [1] mining has been around 5% of total GDP in the last years. This is a significant fact due to the existence of a considerable volume of reserves not accounted for (proved reserves at year 2010 were 6.700 million of tons. Source: INGEOMINAS and UPME), and the coal future role’s prospect, in the world energy production.</p>


2017 ◽  
Vol 25 ◽  
pp. 118-127
Author(s):  
Vasyl Lozynskyi

The purpose of this paper is substantiating of efficiency during application of borehole underground coal gasification technology based on target coal seam geology. Comprehensive methodology that included analytical calculation is implemented in the work. To determine the efficiency of coal seam gasification in faulting areas, an economic calculation method was developed. The obtained conditions of coal seam allow to provide rational order of mine workings. Conclusions regarding the implementation of the offered method are made on the basis of undertaken investigations. The obtained results with sufficient accuracy in practical application will allow consume coal reserves in the faulting zones using environmentally friendly conversion technology to obtain power and chemical generator gas, chemicals and heat.


2013 ◽  
Vol 295-298 ◽  
pp. 3129-3136 ◽  
Author(s):  
Li Mei Zhao ◽  
Jie Liang ◽  
Lu Xin Qian

For testing the feasibility of in-situ exploring oil shale by underground coal gasification. Based on the specification analysis of coal and oil shale, through simulating the occurrence state and characteristics of coal and oil shale, the underground Co-gasification model test was carried-out. In different gasification conditions (φ(O2) are 30%、35%、40%、45%、50% and oxygen/steam) ,The temperature-field extend rules of coal and oil shale、the separate-out rules of oil shale production and influence of oil shale on the quality of gas were studied. The results show that: when φ(O2) is 40-45%, temperature-rising rate is 7°C/min、extend rate of gasification face is 0.036m/h, the extend of temperature field is continuous and stable, the temperature change of oil shale and coal are synchronously , the high temperature of oil shale can up to 1000 °C above, that can satisfied the requirement of oil-gas collecting; and the same time , The heat-value of syngas improved 26.37%; The technological parameter was obtained in this test.


1975 ◽  
Vol 15 (05) ◽  
pp. 425-436 ◽  
Author(s):  
C.F. Magnani ◽  
S.M. Farouq Ali

Abstract This investigation focuses on mathematical modeling of the process of underground gasification of coal by the stream method. A one-dimensional, steady-state model consisting of five coupled differential equations was formulated, and the solution, extracted analytically, was used to develop closed-form expressions for the parameters influencing coal gasification. The model then was used for interpreting field performance curves, predicting the results of The performance curves, predicting the results of The field tests, and ascertaining the over-all process sensitivity to the input variables. The usefulness of the model was shown by establishing the parameters influencing the success or failure of parameters influencing the success or failure of an underground gasification project. Introduction One method of eliminating many of the technological and environmental difficulties encountered during the production of synthetic gas through aboveground coal gasification involves gasifying cod in situ. This process, known as underground coal gasification, was first proposed in 1868 by Sir William Siemens and is based on the controlled combustion of coal in situ. This in-situ combustion results in the production of an artificial or synthetic gas that is rich in carbon dioxide, carbon monoxide, hydrogen, and hydrocarbon gases. Despite the fact that reaction stoichiometry is a moot element of underground coal gasification, it is nonetheless believed thatcarbon dioxide is formed by the partial oxidation of coal,carbon monoxide is generated by the subsequent reduction of carbon dioxide, andthe hydrogen and hydrocarbon gases result from the water-gas reaction and carbonization of coal, respectively. To effect the controlled combustion of coal in situ, the coal seam first must be ignited and a means must be provided for supporting combustion (through injection of a suitable gasification agent) and producing the gases generated underground. Fig. 1 presents a schematic diagram of an underground gasification system that complies with these requirements. This approach to gasifying coal is known as the stream or channel method and necessitates drilling two parallel galleries, one serving as an injection gas inlet and the other as a producer gas outlet. These wells are then linked by a borehole drilled horizontally through the coal seam. Ignition occurs in the coal seam at the gas inlet and proceeds in the direction of flow. The combustion front thus generated moves essentially perpendicular to the direction of gas flow. perpendicular to the direction of gas flow.Since the technological inception of underground gasification, over 1,500 publications have appeared in the literature that bear testimony to the absence of a complete, legitimate, theoretical analysis of the underground gasification process. Given this observation, it is the basis of this paper that progress in underground coal-gasification research progress in underground coal-gasification research has suffered from the absence of "interpretative theory"; that is, it has suffered from a lack of logical, physical, and mathematical analysis of the governing and underlying aerothermochemical principles. The difficulties in formulating a principles. The difficulties in formulating a mathematical model adequately describing the numerous phenomena involved during coal gasification are indeed formidable. SPEJ P. 425


Author(s):  
Michael Green

Underground coal gasification is a conversion and extraction process, for the production of useful synthetic product gas from an in-situ coal seam, to use in power generation, heat production or as a chemical feedstock. While many variants of the underground coal gasification process have been considered and over 75 trials performed throughout the world, the recent work has tended to focus on the control of the process, its environmental impact on underground and surface conditions and its potential for carbon capture and storage. Academic research has produced a set of mathematical models of underground coal gasification, and the European Union-supported programme has addressed the production of a decarbonised product gas for carbon capture and storage. In recent years, significant progress has been made into the modelling of tar formation, spalling, flows within the cavity and the control of minor gasification components, like BTEX and phenols, from underground coal gasification cavities (BTEX refers to the chemicals benzene, toluene, ethylbenzene and xylene). The paper reviews the most recent underground coal gasification field trial and modelling experience and refers to the pubic concern and caution by regulators that arise when a commercial or pilot-scale project seeks approval. It will propose solutions for the next generation of underground coal gasification projects. These include the need to access deeper coal seams and the use of new techniques for modelling the process.


Energies ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5816
Author(s):  
Krzysztof Kapusta

Two experimental simulations of underground coal gasification (UCG) processes, using large bulk samples of lignites, were conducted in a surface laboratory setup. Two different lignite samples were used for the oxygen-blown experiments, i.e., “Velenje” meta-lignite (Slovenia) and “Oltenia” ortho-lignite (Romania). The average moisture content of the samples was 31.6wt.% and 45.6wt.% for the Velenje and Oltenia samples, respectively. The main aim of the study was to assess the suitability of the tested lignites for the underground coal gasification process. The gas composition and its production rates, as well as the temperatures in the artificial seams, were continuously monitored during the experiments. The average calorific value of gas produced during the Velenje lignite experiment (6.4 MJ/Nm3) was much higher compared to the result obtained for the experiment with Oltenia lignite (4.8 MJ/Nm3). The Velenje lignite test was also characterized by significantly higher energy efficiency, i.e., 44.6%, compared to the gasification of Oltenia lignite (33.4%). The gasification experiments carried out showed that the physicochemical properties of the lignite used considerably affect the in situ gasification process. Research also indicates that UCG can be considered as a viable option for the extraction of lignite deposits; however, lignites with a lower moisture content and higher energy density are preferred, due to their much higher process efficiency.


2021 ◽  
Vol 17 (1) ◽  
pp. 1-12
Author(s):  
Irfan Fauzi ◽  
◽  
Zulfahmi Zulfahmi ◽  

Gasifikasi batubara bawah tanah adalah proses gasifikasi batubara secara in-situ pada lapisan batubara yang jauh di bawah tanah dengan cara melakukan injeksi udara bertekanan melalui sumur bor dan menghasilkan gas bakar batubara melalui sumur produksi. Salah satu permasalahan yang perlu diperhatikan dalam proses gasifikasi ini adalah kerusakan konstruksi sumur bor pada saat menginjeksikan udara bertekanan ke dalam sumur, ketika akan membuat jalur koneksi antara sumur injeksi dan produksi. Beberapa faktor yang perlu dievaluasi adalah tegangan dan regangan maksimum, distribusi tegangan dan regangan dan distribusi temperatur di sekitar lokasi sumur tersebut. Analisis dan pemodelan geomekanika dilakukan terhadap kondisi di sekitar sumur bor injeksi dengan memerhatikan kekuatan dan ketebalan casing, karakteristik batuan, kekuatan dan daya lekat penyemenan yang merupakan pengontrol rusak atau tidaknya sumur bor tersebut. Dengan asumsi nilai faktor keamanan ≥1,3, tegangan horizontal maksimum yang aman adalah 30 MPa dengan perolehan nilai tegangan maksimum di sekitar lubang bor sebesar 454,07 MPa, tegangan minimum 0,476 MPa dan regangan maksimum sebesar 0,08 m, serta distribusi temperatur berkisar antara 272,84-22°C dengan nilai terbesar di tengah lubang bor. Dengan demikian udara bertekanan maksimum yang diizinkan melalui konstruksi sumur injeksi adalah sebesar 30 MPa.


Sign in / Sign up

Export Citation Format

Share Document