scholarly journals npTrack: A n-Position Single Axis Solar Tracker Model for Optimized Energy Collection

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 925
Author(s):  
Manoel Henriques de Sá Campos ◽  
Chigueru Tiba
Keyword(s):  
Solar Energy ◽  
Tracking System ◽  
Tracking Error ◽  
Annual Average ◽  
Mechanical Parts ◽  
Solar Tracking ◽  
Proposed Model ◽  
Angle Deviation ◽  
Solar Tracker ◽  
Novel Model

The single axis solar tracker based on flat panels is used in large solar plants and in distribution-level photovoltaic systems. In order to achieve this, the solar tracking systems generally need to work by tracking the sun’s position with dozens, maybe hundreds of movements along the day with a maximal known tracking error within the specifications. A novel model is proposed along this work based on the control of the angle deviation within a (polar) single axis configuration. This way an optimization of the harnessing of solar energy can be achieved with as few panel displacements as possible in order to decrease the wear in the mechanical parts of the equipment and the energy consumed by it. This tracking approach was implemented with as few as seven positions along the day and got an estimated theoretical value of 99.27% of the total collected energy in a continuous tracking system. Regarding an annual average basis, it would be about 96.5% of a dual axis system according to the proposed model. The novelty of the model is related to a tradeoff between the gain with the simplicity of a single axis n-position tracking and the solar energy loss associated.

scholarly journals Development of Solar Powered Sprinkler Robot Based on Watering Plant Using IOT Approach

2021 ◽  
Vol 2107 (1) ◽  
pp. 012024
Author(s):  
Lim Xin You ◽  
Nordiana Shariffudin ◽  
Mohd Zamri Hasan
Keyword(s):  
Renewable Energy ◽  
Solar Energy ◽  
System Analysis ◽  
Tracking System ◽  
Sprinkler System ◽  
Solar Panel ◽  
Maximum Efficiency ◽  
Solar Tracking ◽  
Solar Tracker ◽  
Solar Powered

Abstract Nowadays, solar energy’s popularity is growing consistently every year, along with the growth of amazing solar technologies, which is considered to be one of the most popular. Non-renewable energy like petrol and gasoline is being replaced with solar energy, which is renewable energy. The main objective of this project is to design and simulate a robot solar system. The robot is developed using Arduino Mega 2560 as the main brain of the system. This system is equipped with a solar tracking system to track the movement of the sun and LDR is used to detect the presence of sunlight. The solar tracker is used to get the maximum efficiency of solar energy and reduce power losses. In addition, the solar tracker can rotate from 0° - 180°, which is the best angle for the solar panel to reach the sunlight. This robot will be attached to the sprinkler system to perform the watering process. This robot is developed for use in the agriculture field to reduce the manpower and cost of the watering process. Three analyses will be conducted in this project such as solar panel analysis, Wi-Fi connectivity analysis and sprinkler system analysis. The result shows the solar panel will gain the highest intensity of the sunlight at 12.00 pm and a sunny day compared to the other time and a cloudy day. The maximum range of Wi-Fi connectivity and the water pump, time used to finish the watering process and watering area will be discussed.

scholarly journals Soft computing and IoT based solar tracker

2021 ◽  
Vol 12 (3) ◽  
pp. 1880
Author(s):  
Kanhaiya Kumar ◽  
Lokesh Varshney ◽  
A. Ambikapathy ◽  
Vrinda Mittal ◽  
Sachin Prakash ◽  
...  
Keyword(s):  
Image Processing ◽  
Tracking System ◽  
Tracking Error ◽  
Weather Conditions ◽  
Azimuth Angle ◽  
Positioning System ◽  
Solar Tracking ◽  
Solar Tracker ◽  
Artificial Neural Network Ann ◽  
Tracking Point

<p>The significance of the solar energy is to intensify the effectiveness of the Solar Panel with the use of a primordial solar tracking system. Here we propounded a solar positioning system with the use of the global positioning system (GPS) , artificial neural network (ANN) and image processing (IP) . The azimuth angle of the sun is evaluated using GPS which provide latitude, date, longitude and time. The image processing used to find sun image through which centroid of sun is calculated and finally by comparing the centroid of sun with GPS quadrate to achieve optimum tracking point. Weather conditions and situation observed through AI decision making with the help of IP algorithms. The presented advance adaptation is analyzed and established via experimental effects which might be made available on the memory of the cloud carrier for systematization. The proposed system improve power gain by 59.21% and 10.32% compare to stable system (SS) and two-axis solar following system (TASF) respectively. The reduced tracking error of IoT based Two-axis solar following system (IoT-TASF) reduces their azimuth angle error by 0.20 degree.</p>

scholarly journals Dual axis solar tracker with IoT monitoring system using arduino

2020 ◽  
Vol 11 (1) ◽  
pp. 451
Author(s):  
Siti Amely Jumaat ◽  
Mohamad Nur Aiman Mohd Said ◽  
Clarence Rimong Anak Jawa
Keyword(s):  
Solar Energy ◽  
Monitoring System ◽  
Tracking System ◽  
Energy Sources ◽  
Solar Panels ◽  
Solar Tracking ◽  
Effective Technology ◽  
Solar Tracker ◽  
Traditional Technologies ◽  
The Cost

This project aims to develop dual axis solar tracker with IOT monitoring system using Arduino. Generally, solar energy is the technology to get useful energy from sunlight. Solar energy has been used in many traditional technologies over the centuries and has been widely used in the absence of other energy supplies. Its usefulness is widespread when awareness of the cost of the environment and the supply is limited by other energy sources such as fuel. The solar tracking system is the most effective technology to improve the efficiency of solar panels by tracking and following the sun's movement. With the help of this system, solar panels can improve the way of sunlight detection so that more electricity can be collected as solar panels can maintain a sunny position. Thus the project discusses the development of two-axis solar-tracking developers using Arduino Uno as main controller the system. For develops this project, four light-dependent resistors (LDRs) have been used for sunlight detection and a maximum light intensity. Two servo motors have been used to rotate the solar panel according to the sun's light source detected by the LDR. Next a WIFI ESP8266 device is used as an intermediary between device and IOT monitoring system. The IOT monitoring system is a website that functions to store data. The efficiency of this system has been tested and compared with a single axial solar tracker. As a result, the two-axis solar tracking system generates more power, voltage and current.

On the Tracking Error of a Self-Contained Solar Tracking System

1984 ◽  
Vol 106 (4) ◽  
pp. 416-422 ◽  
Author(s):  
A. Baz ◽  
A. Sabry ◽  
A. Mobarak ◽  
S. Morcos
Keyword(s):  
Solar Energy ◽  
Tracking System ◽  
Tracking Error ◽  
Design Parameters ◽  
Tracking Errors ◽  
Solar Tracking

This paper deals with the analysis of the tracking errors of a self-contained solar tracking system that is totally powered by solar energy. The effect of the different design parameters of the system on its tracking error is studied in detail, in an attempt to define the important factors that influence the system’s performance. The obtained results present valuable design guides for this class of tracking system.

scholarly journals Dual Axis Solar Tracker with Weather Sensor

2019 ◽  
Vol 8 (2S11) ◽  
pp. 3308-3311
Keyword(s):  
Energy Conversion ◽  
Tracking System ◽  
Weather Conditions ◽  
Maximum Amount ◽  
Control Element ◽  
Sensing Element ◽  
Advanced Level ◽  
Solar Tracking ◽  
Solar Tracker ◽  
Arduino Uno

This paper presents the outline and execution of simple, easy and cheaper automatic dual axis solar tracking system using Arduino UNO as the control element and light detecting sensors (LDRS) as the sensing element. This project involves advanced level of technology to capture maximum amount of energy using sun’s radiations. The main purpose is to increase the efficiency of tracking system which can rotate in all four directions continuously according to intensity of radiations and for energy conversion. In this, the voltage from panel is calculated from time to time in an interval of 1hr and this voltage is used to sense the weather conditions and display the climatic temperatures

scholarly journals Design and Implementation of a Parabolic Cylinder Collector with Solar Tracking to obtain hot water

2018 ◽  
Vol 57 ◽  
pp. 02003 ◽  
Author(s):  
Wilson E. Sánchez ◽  
Mario P. Jiménez ◽  
Carlos A. Mantilla ◽  
José M. Toro ◽  
Miguel A. Villa ◽  
...  
Keyword(s):  
Heat Pipe ◽  
Tracking System ◽  
Heating System ◽  
Hot Water ◽  
Parabolic Cylinder ◽  
Charging System ◽  
Design And Implementation ◽  
Solar Tracking ◽  
Deflection Analysis ◽  
Solar Tracker

This investigation describes the design and implementation of a parabolic trough solar collector (PCC) with solar tracking to obtain hot water. The solar radiation available at the installation site is analyzed, followed by the design and construction of the mechanical system, making a series of calculations for the dimensioning of the reflective base, and a stress and deflection analysis of the structure is performed to verify the feasibility of the design in the ANSYS software. An analysis of the solar tracking system is performed, which is dimensioned from the PCC structure to determine the type of solar tracker to implement; The charging system, consisting of a solar panel and a battery, is dimensioned for the power supply of the tracking system; as a last point, for the heating system is determined the amount of water that is able to heat the system from the energy analysis at the installation site, the heating system is based on placing a Heat Pipe, in the focus of the parabola to receive the solar rays reflected by the collector and heat exchange to the water from a thermowell where the heat pipe condenser enters, finally tests are carried out in the PCC implemented obtaining a global efficiency of 16.37%.

scholarly journals Development of Automatic Solar Tracking System for Small Solar Energy System

2018 ◽  
Vol 7 (3.18) ◽  
pp. 11
Author(s):  
Musse Mohamud Ahmed ◽  
Mohammad Kamrul Hasan ◽  
Mohammad Shafiq
Keyword(s):  
Solar Energy ◽  
High Efficiency ◽  
Tracking System ◽  
Energy System ◽  
Maximum Energy ◽  
Solar Panel ◽  
Energy Output ◽  
Small Scale ◽  
Angular Movement ◽  
Solar Tracking

The main purpose of this paper is to present a novel idea that is based on design and development of an automatic solar tracker system that tracks the Sun's energy for maximum energy output achievement. In this paper, a novel automatic solar tracking system has been developed for small-scale solar energy system. The hardware part and programming part have been concurrently developed in order for the solar tracking system to be possible for it to operate accurately. Arduino Uno R3, Sensor Shield V4 Digital Analog Module, LDR (Light Dependent Resistor), MPU-6050 6DOF 3 Axis Gyroscope has been used for tracking the angular sun movement as shown in Fig. 1. Accelerometer, High-Efficiency Solar Panel, and Tower Pro MG90S Servo Motor have been used for the hardware part. High-level programming language has been embedded in the hardware to operate the tracking system effectively. The tracking system has shown significant improvement of energy delivery to solar panel comparing to the conventional method. All the results will be shown in the full paper. There are three contributions the research presented in this paper which are, i.e. perfect tracking system, the comparison between the static and tracking system and the development of Gyroscope angular movement system which tracks the angular movement of the sun along with another tracking system.  

scholarly journals The Impacts of Tracking System Inaccuracy on CPV Module Power

Processes ◽  
2020 ◽  
Vol 8 (10) ◽  
pp. 1278
Author(s):  
Henrik Zsiborács ◽  
Nóra Baranyai ◽  
András Vincze ◽  
Philipp Weihs ◽  
Stefan Schreier ◽  
...  
Keyword(s):  
Tracking System ◽  
Tracking Error ◽  
Weather Conditions ◽  
Cell Diameter ◽  
Tracking Accuracy ◽  
Optimal Position ◽  
Climate Conditions ◽  
Solar Tracking ◽  
Power Yield ◽  
The Difference

The accuracy and reliability of solar tracking greatly impacts the performance of concentrator photovoltaic modules (CPV). Thus, it is of utmost significance to know how deviations in tracking influence CPV module power. In this work, the positioning characteristics of CPV modules compared to the focus points were investigated. The performance of CPV modules mounted on a dual-axis tracking system was analysed as a function of their orientation and inclination. The actual experiment was carried out with CPV cells of 3 mm in diameter. By using a dual tracking system under real weather conditions, the module’s position was gradually modified until the inclination differed by 5° relative to the optimal position of the focus point of the CPV module. The difference in inclination was established by the perfect perpendicularity to the Sun’s rays. The results obtained specifically for CPV technology help determine the level of accuracy that solar tracking photovoltaic systems are required to have to keep the loss in power yield under a certain level. Moreover, this power yield loss also demonstrated that the performance insensitivity thresholds of the CPV modules did not depend on the directions of the alterations in azimuthal alignment. The novelty of the research lies in the fact that earlier, no information had been found regarding the tracking insensitivity point in CPV technologies. A further analysis was carried out to compare the yield of CPV to other, conventional photovoltaic technologies under real Central European climate conditions. It was shown that CPV needs a sun tracking accuracy of at least 0.5° in order to surpass the yield of other PV technologies. Besides providing an insight into the tracking error values of solar tracking sensors, it is believed that the results might facilitate the planning of solar tracking sensor investments as well as the economic calculations related to 3 mm cell diameter CPV system investments.

scholarly journals Optimized Single-Axis Schedule Solar Tracker in Different Weather Conditions

Energies ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 5226
Author(s):  
Nurzhigit Kuttybay ◽  
Ahmet Saymbetov ◽  
Saad Mekhilef ◽  
Madiyar Nurgaliyev ◽  
Didar Tukymbekov ◽  
...  
Keyword(s):  
Rotation Angle ◽  
Tracking System ◽  
Weather Conditions ◽  
Main Task ◽  
Solar Panels ◽  
Simple Method ◽  
Solar Tracking ◽  
Rainy Weather ◽  
Solar Tracker ◽  
One Year

Improving the efficiency of solar panels is the main task of solar energy generation. One of the methods is a solar tracking system. One of the most important parameters of tracking systems is a precise orientation to the Sun. In this paper, the performance of single-axis solar trackers based on schedule and light dependent resistor (LDR) photosensors, as well as a stationary photovoltaic installation in various weather conditions, were compared. A comparative analysis of the operation of a manufactured schedule solar tracker and an LDR solar tracker in different weather conditions was performed; in addition, a simple method for determining the rotation angle of a solar tracker based on the encoder was proposed. Finally, the performance of the manufactured solar trackers was calculated, taking into account various weather conditions for one year. The proposed single-axis solar tracker based on schedule showed better results in cloudy and rainy weather conditions. The obtained results can be used for designing solar trackers in areas with a variable climate.

Design and Performance Analysis of Automatic Solar Tracking System

2015 ◽  
Vol 793 ◽  
pp. 353-357
Author(s):  
F.S. Abdullah ◽  
H.M. Nuhafiz ◽  
O. Mardianaliza ◽  
A. Yusof ◽  
Noor Anida
Keyword(s):  
Performance Analysis ◽  
Power Supply ◽  
Electronic Circuit ◽  
Tracking System ◽  
Solar Panel ◽  
Solar Irradiation ◽  
Dc Motors ◽  
Solar Tracking ◽  
Solar Tracker ◽  
And Performance

Solar tracker is a device that detects the movement of the sun. Solar tracker receive maximum sun ray in order to produce the maximum power supply by the photovoltaic (PV) panels system. It also depends on the environment factor such as solar irradiation and temperature of the panels. This paper presents the development of the automatic solar tracking system, the construction of the sensor circuit, programming of the control system and also its performance analysis. This automatic solar tracking system is designed with an electronic circuit control using PIC that can trigger the dc motors when the LDR sensors detect sunlight. DC motor will move vertical and 360 ̊ horizontal to increase efficiency of sunlight to the solar panel. Solar panel for the project gets power supply from the battery. The battery will be charged using power from the solar panel.

Sign in / Sign up

Export Citation Format

Share Document