scholarly journals Small-Scale Solar–Bio-Hybrid Power Generation Using Brayton and Rankine Cycles

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 472
Author(s):  
Mauricio Bustamante ◽  
Abraham Engeda ◽  
Wei Liao
Keyword(s):  
Power Generation ◽  
Steam Turbine ◽  
Gas Turbine ◽  
Hybrid Systems ◽  
Energy Generation ◽  
Working Fluid ◽  
Small Scale ◽  
Hybrid Power ◽  
Renewable Energy Generation ◽  
Power Generation Systems

This study conducted a detailed technical analysis of small-scale solar–bio-hybrid power generation systems using Rankine (steam turbine) and Brayton (gas turbine) cycles. Thermodynamic models were developed to characterize the state of working fluid and select the most suitable solar collection technology for individual power generation systems. Net capacity factor of power generation and utilization efficiencies of solar and biogas energy were used as parameters to evaluate energy generation and conclude the preferred system configuration. The analysis concluded that the steam turbine system has better global efficiency (67.7%) than the gas turbine system (55.7%), while the gas turbine system has better electricity generation efficiency (27.0%) than that (5.6%) of the steam turbine system. The effects of different climates on the selection of suitable hybrid systems were also investigated to delineate suitability and feasibility of different hybrid systems. In addition, the method used in this study can also be applied to investigate and optimize other small-scale hybrid renewable energy generation systems.

High efficiency gas-turbine power generator GTU-2U

2020 ◽  
Vol 2 (4) ◽  
pp. 185-195
Author(s):  
M. Yu. Egorushkov ◽  
V. Yu. Ivanov ◽  
A. A. Murugov ◽  
A. V. Sheverdin
Keyword(s):  
Power Generation ◽  
Natural Gas ◽  
Gas Turbine ◽  
Power Supply ◽  
Energy Generation ◽  
Gas Production ◽  
Liquefied Natural Gas ◽  
Small Scale ◽  
Mode Of Operation ◽  
Small Capacity

Introduction: the analysis of the main areas of energy transition (energie wende) from fossil fuels and nuclear power generation to renewable sources of energy has identified the following four key problems: electric power shortage; ageing of power generation facilities; insufficient infrastructure; growing demand for gas fuel. In Russia, distributed small-scale power generation facilities serve those consumers who have no access to centralized power supply or network channels of regular power generation. A combination of versatile approaches to electric power generation should be applied in the course of designing a specific energy generation facility in this context.Methods: the research project represents an analysis of the works written by the leading Russian and foreign researchers specializing on power engineering, namely, energy supply to consumers. The expert assessment method has identified the niches which are best fitted by gas turbine facilities. Computerized and simulation modeling techniques were used to perform the analytical and statistical processing of the project findings.Results and discussion: the trend for the structural improvement of small-scale liquefied natural gas facilities has been identified in the course of the research. The author has substantiated development of systems for power supply to smallcapacity liquefied natural gas production facilities. The proposed gas turbine GTU-2U is designated for generation of electric energy, if in operation as a standalone facility as part of a centralized heating and power plant in the standalone mode of operation, or in case of concurrent operation along with an energy generation system within the framework of distributed small capacity networks. The co-authors have substantiated the unit’s practical application and identified the GTU-2U distribution market both in Russia and abroad: small capacity distributed power generation industry and power supply to small-capacity liquefied natural gas production facilities. The latter is a relatively new market which is in the process of proactive development both in mature and developing economies. This power supply pattern will enable to monetize gas deposits, located far from pipelines and to supply gas to hard-to-access regions.Conclusion: the key trends in the development of the contemporary power generation industry are considered in the article. Gas turbine unit GTU-2U has been designed. This unit is capable of generating power both as a standalone facility, as a component of a centralized heating and power plant in the standalone mode of operation, or in case of concurrent operation along with an energy generation system. Its strengths substantiate its practical application both in the Russian and international power generation markets.

Study on the Parameters Influencing Efficiency of Micro-Gas Turbines: A Review

2015 ◽  
Author(s):  
Samarth Jain ◽  
Soumya Roy ◽  
Abhishek Aggarwal ◽  
Dhruv Gupta ◽  
Vasu Kumar ◽  
...  
Keyword(s):  
Power Generation ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Combined Heat And Power ◽  
Lubricating Oil ◽  
Small Scale ◽  
Special Focus ◽  
Continuous Change ◽  
The Future ◽  
Power Generation Systems

The art and science of gas turbine has traditionally seen a gradual and continuous change over the past few decades. Gas turbines are classified into impulse and reaction types and further into turbojet, turbofan, turboprop, after burning turbojet and micro gas turbine. These turbines find applications in airplanes, large scale industries etc. but these are less suitable for the small scale power generation units due to several factors. Micro gas turbines are set to play a significant role particularly in small-scale power generation using combined heat and power generation among all these types of turbines as the future of power generation lies in decentralised and distributed power generation systems. In the light of making use of the high temperature exhaust of a gas turbine, combined heat and power generation systems are being used to increase the power output and overall efficiency. Micro gas turbines are essentially single-stage, single-shaft and low pressure gas turbines whose capacity ranges from 30–150 KW. In comparison to the conventional turbines, micro gas turbines are compact and have low lubricating oil consumption leading to a simpler lube and sump oil system and because they have fewer rotating parts, this leads to lesser balancing problems. The analysis of micro gas turbines has shown that they are capable of meeting current emission standards of NOx and other pollutants. Even though the installation costs of micro gas turbines are high due to the complexity in adjusting to electrical grid frequency, still these distributed energy systems may prove to be more attractive in a competitive market to those seeking increased reliability as they empower these entities with the capacity of self-generation. The following text reviews the developments in the micro gas turbines with a special focus on the efficiency of its components such as the recuperator, the combustion chamber design and also explores the future prospects of the technology in terms of viability of its application in the automobile sector.

Numerical Study of Ammonia/O2 Fired Semiclosed Cycle Gas Turbine for Oxy-Fuel IGCC Power Generation with CO2 Capture

2021 ◽  
Author(s):  
Takeharu Hasegawa
Keyword(s):  
Power Generation ◽  
Renewable Energy ◽  
Power Plant ◽  
Gas Turbine ◽  
Co2 Capture ◽  
Thermal Power Plant ◽  
Thermal Power ◽  
Energy Generation ◽  
Thermal Power Generation ◽  
Renewable Energy Generation

Abstract Europe and the United States, in particular, promote the deregulation of the electric power industry in favor of renewable energy generation. With an increase in renewable energy generation, thermal power generation has been switched to standby power. Ammonia, one of the storage and transport media for H2, is produced in a highly efficient oxyfuel IGCC (integrated coal gasification combined cycle) system with CO2 capture, for the future hydrogen-using society. Using ammonia as an industrial raw material, agricultural fertilizer, and transportation fuel, energy system can be established by combining renewable energy and thermal power generation. Therefore, it is possible to simultaneously construct a thermal power supply system suitable for backup power source owing to the fluctuation of the renewable power generation and to realize improvement of availability of the thermal power plant and the load-leveling. It will be an incentive to build a future zero-emission thermal power plant. In this study, an oxy-fuel IGCC power generation co-produced with ammonia and CO2 capture is proposed. Furthermore, the features and challenges of a gas turbine that fuels CO2-free NH3 are investigated. In particular, the combustion exhaust characteristics of ammonia/oxygen fired semiclosed cycle gas turbine combustor in comparison with those of the conventional fuels are clarified through a kinetic analysis.

Steam Turbine Driving Compressor for Gas-Steam Combined Cycle Power Plant

2009 ◽  
Author(s):  
Wancai Liu ◽  
Hui Zhang
Keyword(s):  
Power Generation ◽  
Power Plant ◽  
Steam Turbine ◽  
Gas Turbine ◽  
Combined Cycle ◽  
Thermodynamic Process ◽  
Combined Cycle Power Plant ◽  
Steam Cycle

Gas turbine is widely applied in power-generation field, especially combined gas-steam cycle. In this paper, the new scheme of steam turbine driving compressor is investigated aiming at the gas-steam combined cycle power plant. Under calculating the thermodynamic process, the new scheme is compared with the scheme of conventional gas-steam combined cycle, pointing its main merits and shortcomings. At the same time, two improved schemes of steam turbine driving compressor are discussed.

Cost Analysis for the Renewable Energy Generation to meet the Energy Security in Bangladesh

2021 ◽  
Vol 7 (3) ◽  
Author(s):  
Shakib Hassan Eon ◽  
Shakib Hassan Eon ◽  
Shakib Hassan Eon
Keyword(s):  
Power Generation ◽  
Renewable Energy ◽  
Energy Security ◽  
Energy Demand ◽  
Energy Generation ◽  
Cost Calculation ◽  
Renewable Power ◽  
First Choice ◽  
Cost Efficient ◽  
Renewable Energy Generation

Renewable energy generation is no more an alternative rather it becomes a choice for the power generation to meet the upcoming energy demand. Considering the non- renewable energy unavailability, as well as, the environmental impact, renewable energy should be the first choice. Most of the power generation in Bangladesh comes from nonrenewable energy and a noticeable amount of energy is imported from abroad. As a developing country, it is not cost-efficient and never ensures energy security. To ensure long-term energy security, it is time to shift power generation from nonrenewable to renewable energy generation. This paper presents an approximate calculation for the renewable power generating plant cost and returning year. The cost calculation is done in the context of Bangladesh.

Three Spool High Efficiency Small Scale Gas Turbine Concept

2017 ◽  
Author(s):  
Matti Malkamäki ◽  
Ahti Jaatinen-Värri ◽  
Antti Uusitalo ◽  
Aki Grönman ◽  
Juha Honkatukia ◽  
...  
Keyword(s):  
Power Generation ◽  
Gas Turbine ◽  
Gas Turbines ◽  
High Efficiency ◽  
Small Scale ◽  
Inlet Temperature ◽  
Substantial Impact ◽  
Electrical Efficiency ◽  
Partial Load ◽  
Reciprocating Engines

Decentralized electricity and heat production is a rising trend in small-scale industry. There is a tendency towards more distributed power generation. The decentralized power generation is also pushed forward by the policymakers. Reciprocating engines and gas turbines have an essential role in the global decentralized energy markets and improvements in their electrical efficiency have a substantial impact from the environmental and economic viewpoints. This paper introduces an intercooled and recuperated three stage, three-shaft gas turbine concept in 850 kW electric output range. The gas turbine is optimized for a realistic combination of the turbomachinery efficiencies, the turbine inlet temperature, the compressor specific speeds, the recuperation rate and the pressure ratio. The new gas turbine design is a natural development of the earlier two-spool gas turbine construction and it competes with the efficiencies achieved both with similar size reciprocating engines and large industrial gas turbines used in heat and power generation all over the world and manufactured in large production series. This paper presents a small-scale gas turbine process, which has a simulated electrical efficiency of 48% as well as thermal efficiency of 51% and can compete with reciprocating engines in terms of electrical efficiency at nominal and partial load conditions.

Sir Charles Parsons and Electrical Power Generation—a Turbine Designer's Perspective

1994 ◽  
Vol 208 (3) ◽  
pp. 159-176 ◽  
Author(s):  
J R Bolter
Keyword(s):  
Power Generation ◽  
Steam Turbine ◽  
Gas Turbine ◽  
Electrical Power Generation ◽  
Analytical Methods ◽  
State Of The Art ◽  
Electrical Power ◽  
Turbine Generator ◽  
Current State ◽  
The World

Sir Charles Parsons died some three years after the author was born. In this paper the author looks back at the pioneering work of Parsons in the field of power generation. It shows how he was able to increase output of the steam turbine generator from 7.5 kW in 1884 to 50000 kW in 1930 while increasing efficiency from 1.6 to 36 per cent, and relates these achievements to the current state of the art. Blading design, rotor construction and other aspects of turbine engineering are considered. The conclusion is that Parsons and his associates charted the course which manufacturers and utilities throughout the world have continued to follow, although increasingly sophisticated design and analytical methods have succeeded the intuitive approach of Parsons. His constant search for improved efficiency was and is highly relevant to today's concern for the environment. Finally, although it did not become a practical proposition in his lifetime, the paper reviews Parsons' vision of, and continuing interest in, the gas turbine, first mentioned in his 1884 patents.

scholarly journals Biomass Gasification for Gas Turbine Based Power Generation

1997 ◽  
Author(s):  
Mark A. Paisley ◽  
Donald Anson
Keyword(s):  
Power Generation ◽  
Gas Turbine ◽  
Gas Turbines ◽  
High Efficiency ◽  
Department Of Energy ◽  
Renewable Biomass ◽  
Process Economics ◽  
Gasification Process ◽  
The Us ◽  
Power Generation Systems

The Biomass Power Program of the US Department of Energy (DOE) has as a major goal the development of cost-competitive technologies for the production of power from renewable biomass crops. The gasification of biomass provides the potential to meet his goal by efficiently and economically producing a renewable source of a clean gaseous fuel suitable for use in high efficiency gas turbines. This paper discusses the development and first commercial demonstration of the Battelle high-throughput gasification process for power generation systems. Projected process economics are presented along with a description of current experimental operations coupling a gas turbine power generation system to the research scale gasifier and the process scaleup activities in Burlington, Vermont.

Sign in / Sign up

Export Citation Format

Share Document