scholarly journals Impact of Users’ Behavior and Real Weather Conditions on the Energy Consumption of Tenement Houses in Wroclaw, Poland: Energy Performance Gap Simulation Based on a Model Calibrated by Field Measurements

Energies ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 6707
Author(s):  
Małgorzata Szulgowska-Zgrzywa ◽  
Ewelina Stefanowicz ◽  
Krzysztof Piechurski ◽  
Agnieszka Chmielewska ◽  
Marek Kowalczyk
Keyword(s):  
Energy Consumption ◽  
Energy Gap ◽  
District Heating ◽  
Field Measurements ◽  
Weather Conditions ◽  
Energy Performance ◽  
Hot Water ◽  
Performance Gap ◽  
Final Energy Consumption ◽  
The Impact

This paper presents the results of measuring the final energy consumption for heating and domestic hot water (DHW) preparation and indoor conditions in 15 apartments located in pre-war tenement houses. The measurements were compared to the computed energy consumption. The calculations ware made based on the model calibrated by field measurements. The discrepancies between measurements and calculations were assessed using the energy performance gap (EPG). Calculations were made separately for energy for heating and for DHW preparation. Additionally, the results of EPG calculations for different levels of analysis are presented aiming at assessing the impact of weather, temperature in the surrounding zones and users’ behavior. Users’ behaviors influencing the size of the EPG were divided into typical (energy saving or excessive energy consumption) and forced (energy poverty, response to the apartment’s surroundings, technical limitations. The connection between the heating sources and the heating habits has been clearly observed in the research. The former (typical) behaviors were the origin of the energy gap in the apartments heated with natural gas and district heating. The latter (forced) were the origin of the gap in the apartments heated with mostly electricity and solid fuel (with one exception: one apartment that utilized the district heating).

scholarly journals Building Energy Performance Certificate—A Relevant Indicator of Actual Energy Consumption and Savings?

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3455
Author(s):  
Aleksandar S. Anđelković ◽  
Miroslav Kljajić ◽  
Dušan Macura ◽  
Vladimir Munćan ◽  
Igor Mujan ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Gap ◽  
Building Energy ◽  
Energy Performance ◽  
Building Stock ◽  
District Heating System ◽  
Performance Gap ◽  
Building Energy Performance ◽  
Actual Energy Consumption

A building energy performance gap can be illustrated as the difference between the theoretical (methodologically defined) and the actual energy consumption. In EU countries, Energy Performance Certificates are issued when buildings are constructed, sold, or leased. This information is the first step in order to evaluate the energy performance of the building stock. In Serbia, when issuing an energy certificate, the adopted national methodology recognizes only energy consumption for heating. The main purpose of this paper is to evaluate the energy gap and estimate the relevance of an Energy Performance Certificate to meet the national energy efficiency or carbon target. An Energy Performance Certificate determines the theoretical residential and commercial building energy efficiency or its “design intent”. This research stresses the necessity of measuring and achieving reductions in actual energy consumption through system regulation and consumers’ self-awareness in buildings. The research compares the performance of the building stock (135) that is connected to the District Heating System (DHS), with its own integrated heat meter, to Individual Gas Boiler (IGB) systems (18), in the city of Novi Sad, Serbia, built after 2014. For the purpose of comparing energy consumption, 16 buildings were selected that are very similar in terms of design, operation, and location. The data used are derived from metered consumption data, official evidence of city service companies, and Energy Performance Certificates of the considered buildings. We have determined that IGB systems have a much wider specific annual performance gap (11.19–101 kWh/m2a) than the buildings in the DHS (3.16–18.58 kWh/m2a).

scholarly journals Solar District Heating Perspective in Austria

2020 ◽  
Author(s):  
Hamid Aghaie
Keyword(s):  
Energy Consumption ◽  
Energy Demand ◽  
District Heating ◽  
Hot Water ◽  
Space Heating ◽  
Domestic Hot Water ◽  
Final Energy ◽  
Increasing Trend ◽  
Final Energy Consumption ◽  
The One

Austrian district heating (DH) has experienced a fast increasing trend for the last 30 years (with the exception of the period 2010-2014), resulting in a triplication of delivered heat; in the year 2018, with about 2400 networks and 20 TWh supply, DH covered 6.4% of the final energy consumption (1122.5 PJ). Worth to underline is also that this growth of Austrian district heating has been about twice faster than the one of the energy demand in the same period. Currently, district heating provides about 26% of the Austrian households with the energy requested for space heating and domestic hot water preparation.

scholarly journals Maxmaladaptation, occupant behaviour and energy performance gap

2021 ◽  
pp. 014362442110009
Author(s):  
Geoffrey Levermore
Keyword(s):  
Social Psychology ◽  
Energy Consumption ◽  
Environmental Factors ◽  
Energy Gap ◽  
Energy Performance ◽  
Occupant Behaviour ◽  
Performance Gap ◽  
Actual Performance ◽  
Novel Concept ◽  
Extreme Scenario

Occupant behaviour is a key factor in the energy consumption and performance of a building. However, it is difficult to model and simulate hence there is often a mismatch between the predicted and actual performance of a new or refurbished buildings and surprising variations in the consumptions of similar and identical buildings. Although environmental conditions affect people significantly, there are also non-environmental factors including how well employers manage people and how well dwelling occupants understand their controls. Rarely are these factors considered in building performance, especially commercial buildings. Poor management can lead to varying degrees of occupant maladaptation. Maladaptation taken here to mean behaviour patterns that are detrimental to the optimal functioning of the building. This paper proposes a novel concept for designers that examines the worst possible energy performance gap (“extreme” scenario testing) where the theoretical occupants do their best to make the building consume as much energy as possible. The novel concept is called “maxmaladaptation”. By considering maxmaladaptation, designers can attempt to reduce it, so reducing the energy gap. This paper briefly reviews the energy gap and social psychology and its contribution to understanding energy consumption with some examples, underlying the concept of maxmaladaptation. Practical application: Building energy performance gaps often exist because predicted design consumptions are often less than actual consumptions due to the occupants not behaving as designers expect. Using the concept of maxmaladaptation, an extreme scenario of maximum energy use by occupants, designers can design buildings to avoid unexpected energy consumption. Often the influences of occupant behaviour are not considered in detail. Social psychology gives an insight into non-environmental factors that can cause maladaptation, a constituent of maxmaladaptation.

Impact of roof shading on building energy performance in warm & humid climatic places of India

2020 ◽  
pp. 50-64
Author(s):  
Kuladeep Kumar Sadevi ◽  
Avlokita Agrawal
Keyword(s):  
Energy Consumption ◽  
Energy Conservation ◽  
Energy Performance ◽  
General Assumption ◽  
Climatic Conditions ◽  
Building Envelope ◽  
Passive Cooling ◽  
Base Case ◽  
U Value ◽  
The Impact

With the rise in awareness of energy efficient buildings and adoption of mandatory energy conservation codes across the globe, significant change is being observed in the way the buildings are designed. With the launch of Energy Conservation Building Code (ECBC) in India, climate responsive designs and passive cooling techniques are being explored increasingly in building designs. Of all the building envelope components, roof surface has been identified as the most significant with respect to the heat gain due to the incident solar radiation on buildings, especially in tropical climatic conditions. Since ECBC specifies stringent U-Values for roof assembly, use of insulating materials is becoming popular. Along with insulation, the shading of the roof is also observed to be an important strategy for improving thermal performance of the building, especially in Warm and humid climatic conditions. This study intends to assess the impact of roof shading on building’s energy performance in comparison to that of exposed roof with insulation. A typical office building with specific geometry and schedules has been identified as base case model for this study. This building is simulated using energy modelling software ‘Design Builder’ with base case parameters as prescribed in ECBC. Further, the same building has been simulated parametrically adjusting the amount of roof insulation and roof shading simultaneously. The overall energy consumption and the envelope performance of the top floor are extracted for analysis. The results indicate that the roof shading is an effective passive cooling strategy for both naturally ventilated and air conditioned buildings in Warm and humid climates of India. It is also observed that a fully shaded roof outperforms the insulated roof as per ECBC prescription. Provision of shading over roof reduces the annual energy consumption of building in case of both insulated and uninsulated roofs. However, the impact is higher for uninsulated roofs (U-Value of 3.933 W/m2K), being 4.18% as compared to 0.59% for insulated roofs (U-Value of 0.33 W/m2K).While the general assumption is that roof insulation helps in reducing the energy consumption in tropical buildings, it is observed to be the other way when insulation is provided with roof shading. It is due to restricted heat loss during night.

scholarly journals Energy Performance Assessment of Innovative Building Solutions Coming from Construction and Demolition Waste Materials

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1226
Author(s):  
Beatriz Fraga-De Cal ◽  
Antonio Garrido-Marijuan ◽  
Olaia Eguiarte ◽  
Beñat Arregi ◽  
Ander Romero-Amorrortu ◽  
...  
Keyword(s):  
Thermal Insulation ◽  
Energy Demand ◽  
Energy Savings ◽  
Flow Analysis ◽  
Weather Conditions ◽  
Energy Performance ◽  
Construction And Demolition Waste ◽  
The European Union ◽  
Demolition Waste ◽  
The Impact

Prefabricated solutions incorporating thermal insulation are increasingly adopted as an energy conservation measure for building renovation. The InnoWEE European project developed three technologies from Construction and Demolition Waste (CDW) materials through a manufacturing process that supports the circular economy strategy of the European Union. Two of them consisted of geopolymer panels incorporated into an External Thermal Insulation Composite System (ETICS) and a ventilated façade. This study evaluates their thermal performance by means of monitoring data from three pilot case studies in Greece, Italy, and Romania, and calibrated building simulation models enabling the reliable prediction of energy savings in different climates and use scenarios. Results showed a reduction in energy demand for all demo buildings, with annual energy savings up to 25% after placing the novel insulation solutions. However, savings are highly dependent on weather conditions since the panels affect cooling and heating loads differently. Finally, a parametric assessment is performed to assess the impact of insulation thickness through an energy performance prediction and a cash flow analysis.

scholarly journals A Fundamental Study on the Development of New Energy Performance Index in Office Buildings

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2064
Author(s):  
Jin-Hee Kim ◽  
Seong-Koo Son ◽  
Gyeong-Seok Choi ◽  
Young-Tag Kim ◽  
Sung-Bum Kim ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Energy Requirement ◽  
Energy Performance ◽  
Office Buildings ◽  
Light Transmittance ◽  
Wall Structure ◽  
Fundamental Study ◽  
Future Studies ◽  
U Value ◽  
The Impact

Recently, there have been significant concerns regarding excessive energy use in office buildings with a large window-to-wall ratio (WWR) because of the curtain wall structure. However, prior research has confirmed that the impact of the window area on energy consumption varies depending on building size. A newly proposed window-to-floor ratio (WFR) correlates better with energy consumption in the building. In this paper, we derived the correlation by analyzing a simulation using EnergyPlus, and the results are as follows. In the case of small buildings, the results of this study showed that the WWR and energy requirement increase proportionally, and the smaller the size is, the higher the energy sensitivity will be. However, results also confirmed that this correlation was not established for buildings approximately 3600 m2 or larger. Nevertheless, from analyzing the correlation between the WFR and the energy requirements, it could be deduced that energy required increased proportionally when the WFR was 0.1 or higher. On the other hand, the correlation between WWR, U-value, solar heat gain coefficient (SHGC), and material property values of windows had little effect on energy when the WWR was 20%, and the highest effect was seen at a WWR of 100%. Further, with an SHGC below 0.3, the energy requirement decreased with an increasing WWR, regardless of U-value. In addition, we confirmed the need for in-depth research on the impact of the windows’ U-value, SHGC, and WWR, and this will be verified through future studies. In future studies on window performance, U-value, SHGC, visible light transmittance (VLT), wall U-value as sensitivity variables, and correlation between WFR and building size will be examined.

scholarly journals Flight Simulator’s Energy Consumption Depending on the Conditions of the Air Operation

Energies ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 580
Author(s):  
Michał Gołębiewski ◽  
Marta Galant-Gołębiewska ◽  
Remigiusz Jasiński
Keyword(s):  
Energy Consumption ◽  
Natural Environment ◽  
Negative Impact ◽  
Weather Conditions ◽  
Civil Aviation ◽  
Flight Simulator ◽  
Motion Platform ◽  
Simulator Motion ◽  
The Individual ◽  
The Impact

Protection of the natural environment is a key activity driving development in the transport discipline today. The use of simulators to train civil aviation pilots provides an excellent opportunity to maintain the balance between efficiency and limit the negative impact of transport on the environment. Therefore, we decided to determine the impact of selected simulations of air operations on energy consumption. The aim of the research was to determine the energy consumption of the flight simulator depending on the type of flight operation and configuration used. We also decided to compare the obtained result with the energy consumption of an aircraft of a similar class, performing a similar aviation operation and other means of transport. In order to obtain the results, a research plan was proposed consisting of 12 scenarios differing in the simulated aircraft model, weather conditions and the use of the simulator motion platform. In each of the scenarios, energy consumption was measured, taking into account the individual components of the simulator. The research showed that the use of a flight simulator has a much smaller negative impact on the natural environment than flying in a traditional plane. Use of a motion platform indicated a change in energy consumption of approximately 40% (in general, flight simulator configuration can change energy consumption by up to 50%). The deterioration of weather conditions during the simulation caused an increase in energy consumption of 14% when motion was disabled and 18% when motion was enabled. Energy consumption in the initial stages of pilot training can be reduced by 97% by using flight simulators compared to aircraft training.

scholarly journals Assessment of the impact of selected factors forcing the driver’s energy consumption

2018 ◽  
Vol 19 (6) ◽  
pp. 53-56
Author(s):  
Piotr Bojar ◽  
Mariusz Mikulski
Keyword(s):  
Energy Consumption ◽  
Driver Behavior ◽  
Weather Conditions ◽  
Transmission System ◽  
Suspension System ◽  
Drive Unit ◽  
The Impact

The drivers' workplace has an impact on the safety of transport. Among the factors causing changes in driver behavior are the anthropechnical factors resulting from the actions of people in the vehicle and its surroundings, external ones resulting from the impact of weather conditions as well as the condition of the infrastructure and work resulting from the operation of the means of transport.One of such working factors is the noise which may be the source of: a drive unit, drive transmission system, suspension system, etc. The paper attempts to identify and assess the impact of this factor on the energy consumption of the driver's work.

scholarly journals Impacts of Microclimate Conditions on the Energy Performance of Buildings in Urban Areas

Buildings ◽  
2019 ◽  
Vol 9 (8) ◽  
pp. 189 ◽  
Author(s):  
Javanroodi ◽  
M.Nik
Keyword(s):  
Urban Areas ◽  
Energy Demand ◽  
Weather Conditions ◽  
Energy Performance ◽  
Urban Morphology ◽  
Weather Data ◽  
Architectural Form ◽  
Energy Performance Of Buildings ◽  
Microclimate Conditions ◽  
The Impact

Urbanization trends have changed the morphology of cities in the past decades. Complex urban areas with wide variations in built density, layout typology, and architectural form have resulted in more complicated microclimate conditions. Microclimate conditions affect the energy performance of buildings and bioclimatic design strategies as well as a high number of engineering applications. However, commercial energy simulation engines that utilize widely-available mesoscale weather data tend to underestimate these impacts. These weather files, which represent typical weather conditions at a location, are mostly based on long-term metrological observations and fail to consider extreme conditions in their calculation. This paper aims to evaluate the impacts of hourly microclimate data in typical and extreme climate conditions on the energy performance of an office building in two different urban areas. Results showed that the urban morphology can reduce the wind speed by 27% and amplify air temperature by more than 14%. Using microclimate data, the calculated outside surface temperature, operating temperature and total energy demand of buildings were notably different to those obtained using typical regional climate model (RCM)–climate data or available weather files (Typical Meteorological Year or TMY), i.e., by 61%, 7%, and 21%, respectively. The difference in the hourly peak demand during extreme weather conditions was around 13%. The impact of urban density and the final height of buildings on the results are discussed at the end of the paper.

scholarly journals The influence of heat loss from pipes in an unheated basement on the heating energy consumption of an entire typical apartment building

2020 ◽  
Vol 172 ◽  
pp. 12005
Author(s):  
Anti Hamburg ◽  
Targo Kalamees
Keyword(s):  
Energy Balance ◽  
Heat Loss ◽  
District Heating ◽  
Building Energy ◽  
Energy Performance ◽  
Heat Losses ◽  
Hot Water ◽  
Limited Information ◽  
Apartment Building ◽  
Heating Energy Consumption

The majority of old apartment buildings were designed with an unheated basement. Building service systems such as district heating heat exchangers and pipes for domestic hot water and for space heating are usually located in this unheated basement. In addition, these locations are connected with shafts. All these pipe’s heat losses increase air temperature in the basement. If these losses are included into the building energy balance, then they decrease heat loss through the basement ceiling. The basement’s heat balance is also dependent on heat loss from the basement envelope and outdoor air exchange in the basement. In early stages of design, designers and energy auditors need rough models to make decisions in limited information conditions. Once the effects of heat losses from pipes become apparent, they need to be factored into the buildings energy balance, and their effects on heat loss through the basement ceiling needs to be calculated. In this paper we analyse the effect these heat losses have on the service system’s heat gains and heat loss through an uninsulated basement ceiling at different basement insulation levels and with different thicknesses of pipe insulation. From our study we found that pipe losses in the basement increase the building energy performance value by at least 4 kWh/(m²∙a) and their impact on a renovated apartment building is very important.

Sign in / Sign up

Export Citation Format

Share Document