scholarly journals Flow Characteristics of a Straight-Bladed Vertical Axis Wind Turbine with Inclined Pitch Axes

Energies ◽  
2020 ◽  
Vol 13 (23) ◽  
pp. 6281
Author(s):  
Jia Guo ◽  
Liping Lei
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
Flow Characteristics ◽  
Wind Farms ◽  
Vertical Axis ◽  
Incline Angle ◽  
Vertical Axis Wind Turbine ◽  
Unsteady Wake ◽  
Horizontal Axis Wind Turbines

Currently, vertical axis wind turbines (VAWT) are considered as an alternative technology to horizontal axis wind turbines in specific wind conditions, such as offshore farms. However, complex unsteady wake structures of VAWTs exert a significant influence on performance of wind turbines and wind farms. In the present study, instantaneous flow fields around and downstream of an innovative VAWT with inclined pitch axes are simulated by an actuator line model. Unsteady flow characteristics around the wind turbine with variations of azimuthal angles are discussed. Several fluid parameters are then evaluated on horizontal and vertical planes under conditions of various fold angles and incline angles. Results show that the total estimated wind energy in the shadow of the wind turbine with an incline angle of 30° and 150° is 4.6% higher than that with an incline angle of 90°. In this way, appropriate arrangements of wind turbines with various incline angles have the potential to obtain more power output in a wind farm.

Vertical axis wind turbine operation in icing conditions: A review study

2021 ◽  
pp. 0309524X2110618
Author(s):  
Syed Abdur Rahman Tahir ◽  
Muhammad Shakeel Virk
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Electricity Production ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines ◽  
Horizontal Axis Wind Turbines ◽  
Promising Solution ◽  
Review Study ◽  
Accretion Physics

Vertical Axis Wind Turbine (VAWT) can be a promising solution for electricity production in remote ice prone territories of high north, where good wind resources are available, but icing is a challenge that can affect its optimum operation. A lot of research has been made to study the icing effects on the conventional horizontal axis wind turbines, but the literature about vertical axis wind turbines operating in icing conditions is still scarce, despite the importance of this topic. This paper presents a review study about existing knowledge of VAWT operation in icing condition. Focus has been made in better understanding of ice accretion physics along VAWT blades and methods to detect and mitigate icing effects.

scholarly journals CFD for Helical Type Vertical Axis Wind Turbine

2019 ◽  
Vol 9 (2S4) ◽  
pp. 474-476
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Computer Aided Design ◽  
Flow Characteristics ◽  
Vertical Axis ◽  
Urban Environments ◽  
Vertical Axis Wind Turbine ◽  
Wind Turbine System ◽  
Twisted Blade ◽  
Aided Design

Vertical axis wind turbines are most effective for home energy generation especially in urban environments. Wind energy creates a stand-alone energy source that is relied on any place. The main criteria for this work is the design of micro wind turbines for all kinds of applications. Design of Twisted Blade Micro-Wind Turbine system is accomplished using computer aided design with Computational Fluid Dynamics (CFD). The flow characteristics in the wind turbine blade were analyzed by varying its twist ratio. The wind turbines with vertical axis utilize the wind from any direction with no yaw mechanism. The risk of blade ejection besides catching wind from all the directions is avoided by using the helical tye vertical axis wind turbine.

Development and Application of a Simulation Tool for Vertical and Horizontal Axis Wind Turbines

2013 ◽  
Author(s):  
David Marten ◽  
Juliane Wendler ◽  
Georgios Pechlivanoglou ◽  
Christian Navid Nayeri ◽  
Christian Oliver Paschereit
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Turbine Rotor ◽  
Horizontal Axis ◽  
Vertical Axis Wind Turbine ◽  
First Case ◽  
Horizontal Axis Wind Turbines ◽  
Lift And Drag ◽  
The Impact

A double-multiple-streamtube vertical axis wind turbine simulation and design module has been integrated within the open-source wind turbine simulator QBlade. QBlade also contains the XFOIL airfoil analysis functionalities, which makes the software a single tool that comprises all functionality needed for the design and simulation of vertical or horizontal axis wind turbines. The functionality includes two dimensional airfoil design and analysis, lift and drag polar extrapolation, rotor blade design and wind turbine performance simulation. The QBlade software also inherits a generator module, pitch and rotational speed controllers, geometry export functionality and the simulation of rotor characteristics maps. Besides that, QBlade serves as a tool to compare different blade designs and their performance and to thoroughly investigate the distribution of all relevant variables along the rotor in an included post processor. The benefits of this code will be illustrated with two different case studies. The first case deals with the effect of stall delaying vortex generators on a vertical axis wind turbine rotor. The second case outlines the impact of helical blades and blade number on the time varying loads of a vertical axis wind turbine.

The Straight-Bladed Morphing Vertical Axis Wind Turbine

2016 ◽  
Author(s):  
David MacPhee ◽  
Asfaw Beyene
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Low Cost ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Pitch Control ◽  
Control Schemes ◽  
Horizontal Axis Wind Turbines ◽  
Novel Concept

Blade pitch control has been extremely important for the development of Horizontal-Axis Wind Turbines (HAWTs), allowing for greater efficiency over a wider range of operational regimes when compared to rigid-bladed designs. For Vertical-Axis Wind Turbines (VAWTs), blade pitching is inherently more difficult due to a dependence of attack angle on turbine armature location, shaft speed, and wind speed. As a result, there have been very few practical pitch control schemes put forward for VAWTs, which may be a major reason why this wind turbine type enjoys a much lower market share as compared to HAWTs. To alleviate this issue, the flexible, straight-bladed vertical-axis turbine is presented, which can passively adapt its geometry to local aerodynamic loadings and serves as a low-cost blade pitch control strategy increasing efficiency and startup capabilities. Using two-dimensional fluid-structure action simulations, this novel concept is compared to an identical rigid one and is proven to be superior in terms of power coefficient due to decreased torque minima. Moreover, due to the flexible nature of the blades, the morphing turbine achieves less severe oscillatory loadings. As a result, the morphing blade design is expected to not only increase efficiency but also system longevity without additional system costs usually associated with active pitch control schemes.

scholarly journals Power Enhancement of a Vertical Axis Wind Turbine Equipped with an Improved Duct

Energies ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5780
Author(s):  
Mohammad Hassan Ranjbar ◽  
Behnam Rafiei ◽  
Seyyed Abolfazl Nasrazadani ◽  
Kobra Gharali ◽  
Madjid Soltani ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Flow Characteristics ◽  
Maximum Velocity ◽  
Leading Edge ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Numerical Solver ◽  
Main Components

Efforts to increase the power output of wind turbines include Diffuser Augmented Wind Turbines (DAWT) or a shroud for the rotor of a wind turbine. The selected duct has three main components: a nozzle, a diffuser, and a flange. The combined effect of these components results in enriched upstream velocity for the rotor installed in the throat of the duct. To obtain the maximum velocity in the throat of the duct, the optimum angles of the three parts have been analyzed. A code was developed to allow all the numerical steps including changing the geometries, generating the meshes, and setting up the numerical solver simultaneously. Finally, the optimum geometry of the duct has been established that allows a doubling of the flow velocity. The flow characteristics inside the duct have also been analyzed in detail. An H-Darrieus Vertical Axis Wind Turbine (VAWT) has been simulated inside the optimized duct. The results show that the power coefficient of the DAWT can be enhanced up to 2.9 times. Deep dynamic stall phenomena are captured perfectly. The duct advances the leading-edge vortex generation and delays the vortex separation.

Generator-Damped Torsional Vibrations of a Vertical Axis Wind Turbine

2005 ◽  
Vol 29 (5) ◽  
pp. 449-461 ◽  
Author(s):  
Sandra Eriksson ◽  
H. Bernhoff
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Synchronous Generator ◽  
Vertical Axis ◽  
Critical Issue ◽  
Torsional Vibrations ◽  
Vertical Axis Wind Turbine ◽  
Fundamental Vibration ◽  
Drive Trains ◽  
Horizontal Axis Wind Turbines

Torsional vibrations may be a critical issue for those vertical axis wind turbines having long drive trains as compared with standard horizontal axis wind turbines. Such vibrations are studied by simulation for two different types of generators used with a vertical axis wind turbine, namely a conventional induction generator with a gearbox and a directly-driven multipole synchronous generator. The synchronous generator has been designed with FEM simulations. The didactic calculations show from first principles that a directly-driven generator is to be preferred when torsional vibrations are considered, since the eigenfrequency of the fundamental vibration is greater for a directly driven generator than otherwise. Thus, the risk of resonance is reduced in a stiff assembly. The generator damping of the vibrations for the simulated, directly-driven synchronous generator is also studied.

Analysis of Senegal Type Vertical Axis Wind Turbines Arrangement in Wind Farm

2019 ◽  
Vol 13 ◽  
Author(s):  
Li Zheng ◽  
Zhang Wenda ◽  
Han Ruihua ◽  
Qi Weiqiang
Keyword(s):  
Wind Speed ◽  
Flow Field ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
Wind Farms ◽  
Vertical Axis ◽  
Energy Utilization ◽  
Unit Distance ◽  
Vertical Axis Wind Turbines

Background: In a wind farm, the wind speed of the downstream wind turbine will be lower than the wind speed of the upstream wind turbine due to the influence of the wake. Therefore, the wake of wind turbines is one of the uncertain factors predicting the annual power generation of wind farms. The study of the wake can effectively improve the efficiency of power generation. The arrangement of vertical axis wind turbines in wind farms is rarely studied. Therefore, it is important to study the vertical layout of wind turbines under the influence of wakes to obtain the best layout and unit spacing. Objective: To obtain the optimal layout and unit distance of wind turbines in Senegal wind turbines by studying the arrangement of Senegal vertical axis wind turbines in wind farms. Method: Based on the ANSYS CFX flow field calculation module, the fluid dynamics model of the Senegal fan was established and the flow field simulation analysis was carried out. Based on the Jensen wake model and its improved model, three layout methods for wind farm wind turbines are proposed: two units are arranged in series, two units are arranged in parallel, and three units are staggered. Through the simulation model, the wind energy utilization coefficient and wind speed of the wind turbine in the wind farm are obtained. Results: The optimal separation distance between the units was analyzed from four different angles: wind energy utilization coefficient, torque analysis, downstream tail flow and wind speed cloud contour. Finally, based on the optimal arrangement and unit distance, a triangular staggered wind farm composed of 10 units is established, and the integrated flow field characteristics of the whole wind farm are simulated and analyzed. The integrated flow field wake characteristics of the wind farm are obtained. Conclusion: In all three arrangements, the optimum distance between the units should be three times the diameter of the wind turbine. This arrangement ensures that most of the units are unaffected by the wake, the area affected by the low velocity wake of the wind farm is small, and the area affected by the high speed wake is large.

Modeling and Numerical Simulation for the Newly Designed Four Cavity Blades Vertical Axis Wind Turbine

2014 ◽  
Vol 554 ◽  
pp. 536-540
Author(s):  
Kadhim Suffer ◽  
Ryspek Usubamatov ◽  
Ghulam Abdul Quadir ◽  
Khairul Azwan Ismail
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Urban Areas ◽  
Fluid Dynamic ◽  
Turbulence Models ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines ◽  
Horizontal Axis Wind Turbines ◽  
The Individual

The last years have proved that Vertical Axis Wind Turbines (VAWTs) are more suitable for urban areas than Horizontal Axis Wind Turbines (HAWTs). To date, very little has been published in this area to assess good performance and lifetime of VAWTs either in open or urban areas. The main goal of this current research is to investigate numerically the aerodynamic performance of a newly designed cavity type vertical axis wind turbine having four blades. In the current new design the power generated depends on the drag force generated by the individual blades and interactions between them in a rotating configuration. For numerical investigation, commercially available computational fluid dynamic CFD software GAMBIT and FLUENT were used. In this numerical analysis the Shear Stress Transport (SST) k-ω turbulence model is used which is better than the other turbulence models available as suggested by some researchers. The computed results show good agreement with published experimental results.

Optimal Placement of Horizontal- and Vertical-Axis Wind Turbines in a Wind Farm for Maximum Power Generation Using a Genetic Algorithm

2011 ◽  
Author(s):  
Xiaomin Chen ◽  
Ramesh Agarwal
Keyword(s):  
Genetic Algorithm ◽  
Wind Turbines ◽  
Wind Farm ◽  
Optimization Problem ◽  
Vertical Axis ◽  
Optimal Placement ◽  
Vertical Axis Wind Turbines ◽  
Wake Effects ◽  
Horizontal Axis Wind Turbines ◽  
Wake Model

In this paper, we consider the Wind Farm layout optimization problem using a genetic algorithm. Both the Horizontal–Axis Wind Turbines (HAWT) and Vertical-Axis Wind Turbines (VAWT) are considered. The goal of the optimization problem is to optimally place the turbines within the wind farm such that the wake effects are minimized and the power production is maximized. The reasonably accurate modeling of the turbine wake is critical in determination of the optimal layout of the turbines and the power generated. For HAWT, two wake models are considered; both are found to give similar answers. For VAWT, a very simple wake model is employed.

scholarly journals Effect of Pitch Parameters on Aerodynamic Forces of a Straight-Bladed Vertical Axis Wind Turbine with Inclined Pitch Axes

2021 ◽  
Vol 11 (3) ◽  
pp. 1033
Author(s):  
Jia Guo ◽  
Timing Qu ◽  
Liping Lei
Keyword(s):  
Wind Turbine ◽  
Vertical Axis ◽  
Speed Ratio ◽  
Incline Angle ◽  
Asymmetric Distribution ◽  
Vertical Axis Wind Turbine ◽  
Power Performance ◽  
Aerodynamic Forces ◽  
Ansys Fluent ◽  
Pitch Regulation

Pitch regulation plays a significant role in improving power performance and achieving output control in wind turbines. The present study focuses on a novel, pitch-regulated vertical axis wind turbine (VAWT) with inclined pitch axes. The effect of two pitch parameters (the fold angle and the incline angle) on the instantaneous aerodynamic forces and overall performance of a straight-bladed VAWT under a tip-speed ratio of 4 is investigated using an actuator line model, achieved in ANSYS Fluent software and validated by previous experimental results. The results demonstrate that the fold angle has an apparent influence on the angles of attack and forces of the blades, as well as the power output of the wind turbine. It is helpful to further study the dynamic pitch regulation and adaptable passive pitch regulation of VAWTs. Incline angles away from 90° lead to the asymmetric distribution of aerodynamic forces along the blade span, which results in an expected reduction of loads on the main shaft and the tower of VAWTs.

Sign in / Sign up

Export Citation Format

Share Document