scholarly journals Effects on Energy Demand in an Office Building Considering Location, Orientation, Façade Design and Internal Heat Gains—A Parametric Study

Energies ◽  
2020 ◽  
Vol 13 (23) ◽  
pp. 6170
Author(s):  
Jakob Carlander ◽  
Bahram Moshfegh ◽  
Jan Akander ◽  
Fredrik Karlsson
Keyword(s):  
Energy Efficiency ◽  
Energy Efficient ◽  
Energy Demand ◽  
Energy Use ◽  
Internal Heat ◽  
Office Building ◽  
Efficient Design ◽  
The North ◽  
Electricity Use ◽  
In The Beginning

12.9% of the energy use in the EU originates from the commercial and public sector. It has therefore become a priority to optimize energy efficiency in these buildings. The purpose of this study has been to explore how energy demand in a new office building is affected by different internal heat gains, location, orientation, and façade design, and also to see how different indicators can change perspective on energy efficiency. The study was performed with simulations in IDA-ICE with different façade design and changes in internal heat gains (IHG), orientation, and location. Energy demand was then compared to two different indicators. Using a façade designed to lower solar heat gains had little effect on energy demand in the north of Sweden, but slightly more effect further south. The amount of internal heat gains had significant effect on energy demand. Making deeper studies on design and internal heat gains should therefore be prioritized in the beginning of new building projects so the most energy-efficient design can be chosen. When the indicator kWh/m2 was used, the cases with low internal heat gains were perceived as the most energy efficient, while when kWh/(m2 × hpers) (hpers = hours of use) was used, the cases with high occupancy and low electricity use were considered to be the most energy efficient. Therefore, revising the standardized indicator is of great importance.

SIMULATION BASED COMPLEX ENERGY ASSESSMENT OF OFFICE BUILDING FENESTRATION

2010 ◽  
Vol 16 (3) ◽  
pp. 345-351 ◽  
Author(s):  
Violeta Motuzienė ◽  
Egidijus Saulius Juodis
Keyword(s):  
Energy Consumption ◽  
Energy Efficient ◽  
Energy Demand ◽  
Office Building ◽  
Negative Effects ◽  
Energy Assessment ◽  
The North ◽  
Complex Evaluation ◽  
Lighting Energy ◽  
Glazed Facade

The number of office buildings with highly fenestrated facades is currently increasing in Lithuania and neighboring countries. Highly fenestrated facades reduce energy consumption for lighting and simultaneously increase energy consumption for heating, cooling, air conveying and may cause thermal and visual discomfort. Pursuing to reduce negative effects of the highly glazed facade, special glasses are frequently used. However, such windows usually increase demand for lighting energy. Therefore, when making early decisions about glazing the building, it is important to have a complex evaluation of energy demand related to the specific case. The paper presents the results of analysis made using energy simulation tools. The obtained results have shown that when shading is not applied, the north is the most energy efficient orientation to glazing for an air conditioned office building in cool climate zones like Lithuania. The most energy efficient window‐to‐wall ratios (WWR) for the south, east and west oriented façade are 20%, whereas for the north it makes 20–40%. However, such WWR values do not satisfy standard requirements for day lighting. Santrauka Pastaraisiais metais Lietuvoje ir kaimyninese šalyse daugeja administracines paskirties pastatu, kuriu dauguma išoriniu atitvaru yra skaidrios. Didesnis istiklinimo plotas lemia mažesnius energijos poreikius apšvietimui, tačiau didina šildymo ir vesinimo sistemu energijos poreikius, sukelia šilumini bei vizualini diskomforta. Neigiamai dideliu skaidriu atitvaru itakai sumažinti naudojami tamsinti ir kitu specialiu charakteristiku stiklai, tačiau tai savo ruožtu didina energijos poreiki apšvietimui. Todel, priimant sprendimus del pastato istiklinimo, svarbu prieš tai kompleksiškai išnagrineti konkretaus sprendimo itaka pastato energijos poreikiams. Straipsnyje pateikiama modeliuojant gautu rezultatu analize. Rezultatai parode, kad vesaus klimato šalyse, kurioms priklauso ir Lietuva, kondicionuojamu administraciniu pastatu fasadu, kai nenaudojamos apsaugos nuo saules priemones, energiškai efektyviausias istiklinimas yra i šiaures puse. Energiškai efektyviausias santykinis fasado istiklinimo plotas pietines, rytines ir vakarines orientacijos fasadams yra 20 %, o šiaurines ‐ 20–40 %. Tačiau tokie istiklinimo plotai neatitinka norminiu natūralaus apšvietimo reikalavimu.

scholarly journals Exploring Climate-Change Impacts on Energy Efficiency and Overheating Vulnerability of Bioclimatic Residential Buildings under Central European Climate

2021 ◽  
Vol 13 (12) ◽  
pp. 6791
Author(s):  
Luka Pajek ◽  
Mitja Košir
Keyword(s):  
Climate Change ◽  
Energy Efficiency ◽  
Energy Efficient ◽  
Energy Demand ◽  
Energy Use ◽  
Residential Buildings ◽  
Building Design ◽  
Temperate Climate ◽  
Design Parameters ◽  
Central European

Climate change is expected to expose the locked-in overheating risk concerning bioclimatic buildings adapted to a specific past climate state. The study aims to find energy-efficient building designs which are most resilient to overheating and increased cooling energy demands that will result from ongoing climate change. Therefore, a comprehensive parametric study of various passive building design measures was implemented, simulating the energy use of each combination for a temperate climate of Ljubljana, Slovenia. The approach to overheating vulnerability assessment was devised and applied using the increase in cooling energy demand as a performance indicator. The results showed that a B1 heating energy efficiency class according to the Slovenian Energy Performance Certificate classification was the highest attainable using the selected passive design parameters, while the energy demand for heating is projected to decrease over time. In contrast, the energy use for cooling is in general projected to increase. Furthermore, it was found that, in building models with higher heating energy use, low overheating vulnerability is easier to achieve. However, in models with high heating energy efficiency, very high overheating vulnerability is not expected. Accordingly, buildings should be designed for current heating energy efficiency and low vulnerability to future overheating. The paper shows a novel approach to bioclimatic building design with global warming adaptation integrated into the design process. It delivers recommendations for the energy-efficient, robust bioclimatic design of residential buildings in the Central European context, which are intended to guide designers and policymakers towards a resilient and sustainable built environment.

scholarly journals Integrating Energy Efficiency into the Municipal Procurement Process of Buildings—Whose Responsibility?

Buildings ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 45 ◽  
Author(s):  
Mihail Vinokurov ◽  
Kaisa Grönman ◽  
Simo Hammo ◽  
Risto Soukka ◽  
Mika Luoranen
Keyword(s):  
Energy Efficiency ◽  
Energy Efficient ◽  
Energy Use ◽  
Low Carbon ◽  
Efficient Design ◽  
Indoor Climate ◽  
Operational Environment ◽  
Procurement Process ◽  
Low Carbon Economy ◽  
Process Energy

This study addresses the challenges in ensuring energy efficiency and high indoor climate quality with efficient use of public money in the municipal building procurement process. Energy efficient municipal building procurement provides a significant leverage when steering the built environment towards the low-carbon economy targets of the EU. Municipal building department professionals need more skills and knowledge to appropriately define the requirements and identify the energy efficient design options accounting for the building’s changing operational environment. This study presents how to systematically integrate energy efficiency in the municipal procurement process of buildings by presenting the list of energy efficiency factors to be included into the procurement process. This list of factors clarifies how indoor climate quality, energy use, and the life cycle economy are related through technological solutions and how the optimal compromise solution can be determined. Furthermore, this list of factors explains the responsibilities in integrating energy efficiency within the municipal building procurement process. Applied in the design of the municipal building the list of factors contributes to more informed and transparent decision-making process.

scholarly journals Multi-Country Analysis on Energy Savings in Buildings by Means of a Micro-Solar Organic Rankine Cycle System: A Simulation Study

Environments ◽  
2018 ◽  
Vol 5 (11) ◽  
pp. 119 ◽  
Author(s):  
Alessia Arteconi ◽  
Luca Del Zotto ◽  
Roberto Tascioni ◽  
Khamid Mahkamov ◽  
Chris Underwood ◽  
...  
Keyword(s):  
Thermal Energy ◽  
Energy Demand ◽  
Energy Use ◽  
Energy Savings ◽  
Organic Rankine Cycle ◽  
Cost Savings ◽  
Rankine Cycle ◽  
Primary Energy ◽  
Operational Cost ◽  
The North

In this paper, the smart management of buildings energy use by means of an innovative renewable micro-cogeneration system is investigated. The system consists of a concentrated linear Fresnel reflectors solar field coupled with a phase change material thermal energy storage tank and a 2 kWe/18 kWth organic Rankine cycle (ORC) system. The microsolar ORC was designed to supply both electricity and thermal energy demand to residential dwellings to reduce their primary energy use. In this analysis, the achievable energy and operational cost savings through the proposed plant with respect to traditional technologies (i.e., condensing boilers and electricity grid) were assessed by means of simulations. The influence of the climate and latitude of the installation was taken into account to assess the performance and the potential of such system across Europe and specifically in Spain, Italy, France, Germany, U.K., and Sweden. Results show that the proposed plant can satisfy about 80% of the overall energy demand of a 100 m2 dwelling in southern Europe, while the energy demand coverage drops to 34% in the worst scenario in northern Europe. The corresponding operational cost savings amount to 87% for a dwelling in the south and at 33% for one in the north.

Linked Energy Systems for Production Sites of the Future

2013 ◽  
Vol 769 ◽  
pp. 319-326 ◽  
Author(s):  
Martin Beck ◽  
Tilo Sielaff
Keyword(s):  
Energy Efficiency ◽  
Energy Efficient ◽  
Energy Demand ◽  
Energy System ◽  
Efficient System ◽  
Industrial Enterprises ◽  
Future Production ◽  
Cost Efficient ◽  
System Configurations ◽  
Energy Network

Industrial enterprises are increasingly driven to tap the potentials of energy efficiency in existing and future production sites. The challenge is to identify cost-efficient levers for a low energy demand in the linked energy system of production machines and peripheral devices. Considering enabling technologies for energy efficiency and energy recovery in a cascaded energy network with energy storages this paper presents an approach towards energy and cost-efficient system configurations for production sites. An outlook will be given on the research center eta-factory for energy efficient factories at the PTW, TU Darmstadt.

scholarly journals Feedforward Tactical Optimization for Energy-Efficient Operation of Freight Trains: The Swiss Case

2018 ◽  
Vol 2672 (10) ◽  
pp. 278-288 ◽  
Author(s):  
Valerio De Martinis ◽  
Ambra Toletti ◽  
Francesco Corman ◽  
Ulrich A. Weidmann ◽  
Andrew Nash
Keyword(s):  
Energy Efficiency ◽  
Energy Efficient ◽  
Real Data ◽  
Efficient Solutions ◽  
Future Market ◽  
Speed Profile ◽  
Efficient Operation ◽  
The North ◽  
Simulation Based ◽  
Profile Optimization

The optimization of rail operation for improving energy efficiency plays an important role for the current and future market of rail freight services and helps rail compete with other transport modes. This paper presents a feedforward simulation-based model that performs speed profile optimization together with minor rescheduling actions. The model’s purpose is to provide railway operators and infrastructure managers with energy-efficient solutions that are tailored especially for freight trains. This work starts from the assumption that freight train characteristics are completely defined only a few hours before actual departure; therefore, small specific feedforward adjustments that do not affect the surrounding operation can still be considered. The model was tested in a numerical example. The example clearly shows how the optimized solutions can be evaluated with reference to energy saved and robustness within the rail traffic. The evaluation is based on real data from the North–South corridor crossing Switzerland from Germany to Italy.

scholarly journals ASSESSMENT OF ENERGY PERFORMANCE GAP OF AN OFFICE BUILDING

2021 ◽  
Vol 13 (0) ◽  
pp. 1-6
Author(s):  
Rasa Džiugaitė-Tumėnienė ◽  
Domas Madeikis
Keyword(s):  
Energy Efficiency ◽  
Energy Demand ◽  
Internal Heat ◽  
Energy Performance ◽  
Energy Model ◽  
Indoor Climate ◽  
Performance Gap ◽  
Protection Measures ◽  
Climate Parameters

The high share of global energy costs to create an indoor climate has been of increasing interest to the global community for several decades and is increasingly the focus of policy. This paper analyses the energy performance gap between actual energy consumption and energy demand obtained during the dynamic energy simulation and building certification. To identify the energy performance gap, an existing office of energy efficiency class B was selected as a case study. The simulation program IDA Indoor Climate and Energy was used to create a dynamic energy model, based on the designed documentation and the actual indoor climate parameters recorded by the building management system. The results of the case study showed that the accuracy and reliability of the results presented by the dynamic energy model of the building directly depend on the assumptions. The correct values of the internal heat gains, indoor climate parameters, human behavior, air quality levels at different times of the day and season, HVAC system operation parameters and operation modes, specific fan powers of ventilation systems, the seasonal energy efficiency of cooling equipment and characteristics of sun protection measures have to be selected.

scholarly journals ENERGY EFFICIENCY IN RESIDENTIAL BUILDINGS, LESS STRAIGHT FORWARD THEN PRESUMED

2018 ◽  
Vol 13 (1) ◽  
Author(s):  
Hugo Hens
Keyword(s):  
Energy Efficiency ◽  
Energy Efficient ◽  
Energy Use ◽  
Low Voltage ◽  
Residential Buildings ◽  
Primary Energy ◽  
Heating And Cooling ◽  
Net Zero ◽  
Energy Conserving ◽  
New Construction

Since the 1990s, the successive EU directives and related national or regional legislations require new construction and retrofits to be as much as possible energy-efficient. Several measures that should stepwise minimize the primary energy use for heating and cooling have become mandated as requirement. However, in reality, related predicted savings are not seen in practice. Two effects are responsible for that. The first one refers to dweller habits, which are more energy-conserving than the calculation tools presume. In fact, while in non-energy-efficient ones, habits on average result in up to a 50% lower end energy use for heating than predicted. That percentage drops to zero or it even turns negative in extremely energy-efficient residences. The second effect refers to problems with low-voltage distribution grids not designed to transport the peaks in electricity whensunny in summer. Through that, a part of converters has to be uncoupled now and then, which means less renewable electricity. This is illustrated by examples that in theory should be net-zero buildings due to the measures applied and the presence of enough photovoltaic cells (PV) on each roof. We can conclude that mandating extreme energy efficiency far beyond the present total optimum value for residential buildings looks questionable as a policy. However, despite that, governments and administrations still seem to require even more extreme measurements regarding energy efficiency.

Energy Efficient Residential Block Design

2013 ◽  
pp. 1027-1046 ◽  
Author(s):  
Hakan Hisarligil ◽  
Sule Karaaslan
Keyword(s):  
Energy Efficient ◽  
Energy Use ◽  
Block Design ◽  
Methodological Approach ◽  
Sustainable Urban Development ◽  
Efficient Design ◽  
Heating And Cooling ◽  
Building Energy Analysis ◽  
Cooling Loads ◽  
User Friendly

This chapter presents a methodological approach to residential block design for sustainable urban development for hot-summer and cold-winter climates. Taking Ankara as a case, its focus is on developing an energy efficient design process as regards residential block geometry with optimum performance for both climate and energy use. The numerous variables analyzed are orientation, building geometry and envelope, heating and cooling loads of buildings, and microclimatic conditions including solar radiation, air, and wall temperature, and wind speed. It is also important in this study to demonstrate the potential use of “free and user-friendly” simulation tools for such analysis in the early design phase for those who are not experts but have moderate knowledge of urban microclimate and energy. For this aim Weather Tool v2.00 for climate and passive design analysis, CASAnova 3.0 for building energy analysis, and ENVI-met 3.0 for microclimatic analysis are used.

scholarly journals Energy Use Efficiency Past-to-Future Evaluation: An International Comparison

Energies ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3804 ◽  
Author(s):  
Chia-Nan Wang ◽  
Thi-Duong Nguyen ◽  
Min-Chun Yu
Keyword(s):  
United States ◽  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Demand ◽  
Energy Use ◽  
The United States ◽  
Total Energy Consumption ◽  
The Future ◽  
The Status ◽  
Energy Efficiency Evaluation

Despite the many benefits that energy consumption brings to the economy, consuming energy also leads nations to expend more resources on environmental pollution. Therefore, energy efficiency has been proposed as a solution to improve national economic competitiveness and sustainability. However, the growth in energy demand is accelerating while policy efforts to boost energy efficiency are slowing. To solve this problem, the efficiency gains in countries where energy consumption efficiency is of the greatest concern such as China, India, the United States, and Europe, especially, emerging economies, is central. Additionally, governments must take greater policy actions. Therefore, this paper studied 25 countries from Asia, the Americas, and Europe to develop a method combining the grey method (GM) and data envelopment analysis (DEA) slack-based measure model (SMB) to measure and forecast the energy efficiency, so that detailed energy efficiency evaluation can be made from the past to the future; moreover, this method can be extended to more countries around the world. The results of this study reveal that European countries have a higher energy efficiency than countries in Americas (except the United States) and Asian countries. Our findings also show that an excess of total energy consumption is the main reason causing the energy inefficiency in most countries. This study contributes to policymaking and strategy makers by sharing the understanding of the status of energy efficiency and providing insights for the future.

Sign in / Sign up

Export Citation Format

Share Document