scholarly journals Decision Making Support for Local Authorities Choosing the Method for Siting of In-City EV Charging Stations

Energies ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4682 ◽  
Author(s):  
Grzegorz Sierpiński ◽  
Marcin Staniek ◽  
Marcin Jacek Kłos
Keyword(s):  
Decision Making ◽  
Electric Vehicles ◽  
Urban Areas ◽  
Minimum Energy ◽  
Initial State ◽  
Local Authorities ◽  
Additional Energy ◽  
Charging Station ◽  
Charging Stations ◽  
Decision Making Support

Development of electromobility in urban areas requires an appropriate level of vehicle charging infrastructure. Numerous methods for siting of charging stations have been developed to date, and they appear to be delivering diverse outcomes for the same area, which is why local authorities face the problem of choosing the right station layout. The solution proposed in this article is to use a travel planner to evaluate the distribution of charging stations over the area of a metropolis. The decision making support is achieved by determining optimal travel routes for electric vehicles according to their initial state of charge for the three selected station siting methods. The evaluation focused on the following three aspects: (1) number of travels that cannot be made (due to the lack of a charging station at a certain distance around the start point), (2) extension of the travel caused by the need to recharge the vehicle on-route, and (3) additional energy consumption by electric vehicles required to reach the charging station (necessity of departing from the optimal route). An analysis of the results has made it possible to determine a solution which is superior to others. For the case study analysed in the paper, i.e., the territory of the Metropolis of Upper Silesia and Dabrową Basin (Górnośląsko-Zagłębiowska Metropolia, GZM), the distribution of charging stations established in line with method I has returned the best results. What the method in question also makes possible is to indicate a safe minimum energy reserve to complete the travel by eliminating situations of unexpected vehicle immobilisation due to on-route energy depletion and by minimising the phenomenon referred to as range anxiety.

Novel Cruise Speed Highway Charging of Electric Vehicles in India

2015 ◽  
Vol 5 (2) ◽  
Author(s):  
Bharat Raj Singh ◽  
Manoj Kumar Singh
Keyword(s):  
Electric Vehicles ◽  
Urban Areas ◽  
Combustion Engine ◽  
Charging Station ◽  
Range Anxiety ◽  
Long Time ◽  
Level 3 ◽  
Battery Technology ◽  
Commercial Station ◽  
Charging Stations

The utility of all-electric automobiles is limited by various factors. The most important one is the 'range anxiety'; this is a severe limitation on the adoption rates of battery electric vehicles (BEV). There is a periodic need to stop and re-charge or replace the batteries after traveling a relatively short distance. The long time needed to recharge the depleted battery usually necessitates exchanging the battery for a different one at each charging stop, similar to changing horses on a 19th century Stage Coach. Today three levels of recharging are available. Level 1 is using a home electrical system, taking roughly 8 hours to recharge the batteries after depletion at maximum range. Level 2 is charging from a commercial station, taking about 2 hours. Level 3 is high-current charging, which can complete the charging process in 30 minutes. Even Level 3 compares quite unfavorably to the 5 to 10 minutes needed to refill an automobile gasoline tank. Moreover, charging stations are not widely available outside major urban areas. for a few hours at highway speeds, are quite prohibitive. Obviously, these are major obstacles in increasing the market viability of electric automobiles. The issue addressed in this paper is an approach using emerging technologies to overcome the limitations of a BEV. With the current battery technology, the mass and volume needed to carry enough charge to travel. We address these issues by looking at the feasibility of charging automobiles while they are traveling at highway speeds. If this system is implemented, a BEV's effective range could be increased to match the range of an internal combustion engine (ICE) vehicle. This would imply that BEVs would be suitable for intercity highway travel, with the assurance of power being available on the go. We developed a model to optimize the number of wireless charging stations required depending on various factors. This model is discussed in detail later in the paper. As seen below, the requirement boils down to delivering roughly 1 kWh per charging station, while the automobile is moving at highway cruise speeds.

scholarly journals Energy Management System Optimization of Drug Store Electric Vehicles Charging Station Operation

2021 ◽  
Vol 13 (11) ◽  
pp. 6163
Author(s):  
Yongyi Huang ◽  
Atsushi Yona ◽  
Hiroshi Takahashi ◽  
Ashraf Mohamed Hemeida ◽  
Paras Mandal ◽  
...  
Keyword(s):  
Power Generation ◽  
Electric Vehicle ◽  
Electric Vehicles ◽  
System Optimization ◽  
Mixed Integer ◽  
Charging Station ◽  
Electric Vehicle Charging ◽  
Photovoltaic Power ◽  
Vehicle Charging ◽  
Charging Stations

Electric vehicle charging station have become an urgent need in many communities around the world, due to the increase of using electric vehicles over conventional vehicles. In addition, establishment of charging stations, and the grid impact of household photovoltaic power generation would reduce the feed-in tariff. These two factors are considered to propose setting up charging stations at convenience stores, which would enable the electric energy to be shared between locations. Charging stations could collect excess photovoltaic energy from homes and market it to electric vehicles. This article examines vehicle travel time, basic household energy demand, and the electricity consumption status of Okinawa city as a whole to model the operation of an electric vehicle charging station for a year. The entire program is optimized using MATLAB mixed integer linear programming (MILP) toolbox. The findings demonstrate that a profit could be achieved under the principle of ensuring the charging station’s stable service. Household photovoltaic power generation and electric vehicles are highly dependent on energy sharing between regions. The convenience store charging station service strategy suggested gives a solution to the future issues.

scholarly journals Distribution Network Congestion Dispatch Considering Time-Spatial Diversion of Electric Vehicles Charging

Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2820 ◽  
Author(s):  
Hui Sun ◽  
Peng Yuan ◽  
Zhuoning Sun ◽  
Shubo Hu ◽  
Feixiang Peng ◽  
...  
Keyword(s):  
Electric Vehicle ◽  
Electric Vehicles ◽  
Distribution Network ◽  
Network Congestion ◽  
Charging Station ◽  
Electric Vehicle Charging ◽  
Large Numbers ◽  
Pricing Scheme ◽  
Multiple Charging ◽  
Charging Stations

With the popularization of electric vehicles, free charging behaviors of electric vehicle owners can lead to uncertainty about charging in both time and space. A time-spatial dispatching strategy for the distribution network guided by electric vehicle charging fees is proposed in this paper, which aims to solve the network congestion problem caused by the unrestrained and free charging behaviors of large numbers of electric vehicles. In this strategy, congestion severity of different lines is analyzed and the relationship between the congested lines and the charging stations is clarified. A price elastic matrix is introduced to reflect the degree of owners’ response to the charging prices. A pricing scheme for optimal real-time charging fees for multiple charging stations is designed according to the congestion severity of the lines and the charging power of the related charging stations. Charging price at different charging station at different time is different, it can influence the charging behaviors of vehicle owners. The simulation results confirmed that the proposed congestion dispatching strategy considers the earnings of the operators, charging cost to the owners and the satisfaction of the owners. Moreover, the strategy can influence owners to make judicious charging plans that help to solve congestion problems in the network and improve the safety and economy of the power grid.

scholarly journals Locating Multiple Size and Multiple Type of Charging Station for Battery Electricity Vehicles

2018 ◽  
Vol 10 (9) ◽  
pp. 3267 ◽  
Author(s):  
Shaohua Cui ◽  
Hui Zhao ◽  
Huijie Wen ◽  
Cuiping Zhang
Keyword(s):  
Travel Time ◽  
Electric Vehicles ◽  
Sensitivity Analyses ◽  
Mixed Integer ◽  
Range Limit ◽  
Mixed Integer Linear Program ◽  
Charging Station ◽  
Different Types ◽  
Initial Charge ◽  
Charging Stations

As environmental and energy issues have attracted more and more attention from the public, research on electric vehicles has become extensive and in-depth. As driving range limit is one of the key factors restricting the development of electric vehicles, the energy supply of electric vehicles mainly relies on the building of charging stations, battery swapping stations, and wireless charging lanes. Actually, the latter two kinds of infrastructure are seldom employed due to their immature technology, relatively large construction costs, and difficulty in standardization. Currently, charging stations are widely used since, in the real world, there are different types of charging station with various levels which could be suitable for the needs of network users. In the past, the study of the location charging stations for battery electric vehicles did not take the different sizes and different types into consideration. In fact, it is of great significance to set charging stations with multiple sizes and multiple types to meet the needs of network users. In the paper, we define the model as a location problem in a capacitated network with an agent technique using multiple sizes and multiple types and formulate the model as a 0–1 mixed integer linear program (MILP) to minimize the total trip travel time of all agents. Finally, we demonstrate the model through numerical examples on two networks and make sensitivity analyses on total budget, initial quantity, and the anxious range of agents accordingly. The results show that as the initial charge increases or the budget increases, travel time for all agents can be reduced; a reduction in range anxiety can increase travel time for all agents.

The Use of Plug-In Hybrid Electric Vehicles for Peak Shaving

2015 ◽  
Vol 138 (1) ◽  
Author(s):  
Charles G. Tse ◽  
Benjamin A. Maples ◽  
Frank Kreith
Keyword(s):  
Electric Vehicles ◽  
Hybrid Electric Vehicles ◽  
Feasibility Analysis ◽  
Energy Availability ◽  
Peak Shaving ◽  
Charging Station ◽  
Sufficient Energy ◽  
Financial Investments ◽  
Hybrid Electric ◽  
Charging Stations

This article is a feasibility analysis of using the batteries in plug-in hybrid electric vehicles (PHEVs) for peak shaving. The analysis focuses on energy availability of the PHEV fleet as well as the financial savings to the utilities by analyzing different charging scenarios and circuitry. The energy availability and the financial savings are heavily dependent on the location and availability of charging stations. Three charging scenarios are analyzed: charging is possible at any time; cars can only be charged overnight; and charging can be done overnight and twice during the day at the place of work for cars used for commuting. The major findings of the study are that charging only overnight will not provide sufficient energy when needed, but both other charging mechanisms can provide effective peak shaving. The charging anytime would require funding a large number of charging station, but charging overnight and at work could be accomplished with relative minor financial investments. The savings from peak shaving could be used for incentives to offset the extra cost of batteries in plug-in electric vehicles (EVs).

The Use of Plug-In Hybrid Electric Vehicles for Peak Shaving

2014 ◽  
Author(s):  
Charles G. Tse ◽  
Benjamin A. Maples ◽  
Frank Kreith
Keyword(s):  
Electric Vehicles ◽  
Hybrid Electric Vehicles ◽  
Feasibility Analysis ◽  
Energy Availability ◽  
Peak Shaving ◽  
Charging Station ◽  
Sufficient Energy ◽  
Financial Investments ◽  
Hybrid Electric ◽  
Charging Stations

This article is a feasibility analysis of using the batteries in Plug-in Hybrid Electric Vehicles (PHEVs) for peak shaving. The analysis focuses on energy availability of the PHEV fleet as well as the financial savings to the utilities by analyzing different charging scenarios and circuitry. The energy availability and the financial savings are heavily dependent on the location and availability of charging stations. Three charging scenarios are analyzed: charging is possible at any time; cars can only be charged overnight; charging can be done overnight and twice during the day at the place of work for cars that are used for commuting. The major findings of the study are that charging only overnight will not provide sufficient energy when needed, but both other charging mechanisms can provide effective peak shaving. The charging anytime would require funding a large number of charging station, but charging overnight and at work could be accomplished with relative minor financial investments. The savings from peak shaving could be used for incentives to offset the extra cost of batteries in plug-in electric vehicles.

scholarly journals A smart management system of electric vehicles charging plans on the highway charging stations

2021 ◽  
Vol 23 (2) ◽  
pp. 752
Author(s):  
Ibrahim El-Fedany ◽  
Driss Kiouach ◽  
Rachid Alaoui
Keyword(s):  
Electric Vehicles ◽  
Large Scale ◽  
Scheduling Algorithm ◽  
Long Distance ◽  
Smart Transportation ◽  
Charging Station ◽  
Charging Time ◽  
Trip Time ◽  
Automatic Mechanism ◽  
Charging Stations

Electric vehicles (EVs) are seen as one of the principal pillars of smart transportation to relieve the airborne pollution induced by fossil CO2 emissions. However, the battery limit, especially where the journey is with a long-distance road remains the most formidable obstacle to the large-scale use of EVs. To overcome the issue of prolonged waiting charging time due to the large number of EVs may have a charging plan at the same charging station (CS) along the highway, we propose a communication system to manage the EVs charging demands. The architecture system contains a smart scheduling algorithm to minimize trip time including waiting time, previous reservations and energyare needed to reach the destination. Moreover, an automatic mechanism for updating reservation is integrated to adjust the EVs charging plans. The results of the evaluation under the Moroccan highway scenario connecting Rabat and Agadir show the effectiveness of our proposal system.<br /><div> </div>

scholarly journals Novel Fuzzy Controller for a Standalone Electric Vehicle Charging Station Supplied by Photovoltaic Energy

2021 ◽  
Vol 4 (3) ◽  
pp. 63
Author(s):  
Sherif A. Zaid ◽  
Hani Albalawi ◽  
Khaled S. Alatawi ◽  
Hassan W. El-Rab ◽  
Mohamed E. El-Shimy ◽  
...  
Keyword(s):  
Electric Vehicle ◽  
Electric Vehicles ◽  
Fuzzy Controller ◽  
Electric Utility ◽  
Low Noise ◽  
System Response ◽  
Charging Station ◽  
Electric Vehicle Charging ◽  
Vehicle Charging ◽  
Charging Stations

The electric vehicle (EV) is one of the most important and common parts of modern life. Recently, EVs have undergone a big development thanks to the advantages of high efficiency, negligible pollution, low maintenance, and low noise. Charging stations are very important and mandatory services for electric vehicles. Nevertheless, they cause high stress on the electric utility grid. Therefore, renewable energy-sourced charging stations have been introduced. They improve the environmental issues of the electric vehicles and support remote area operation. This paper proposes the application of fuzzy control to an isolated charging station supplied by photovoltaic power. The system is modeled and simulated using Matlab/Simulink. The simulation results indicate that the disturbances in the solar insolation do not affect the electric vehicle charging process at all. Moreover, the controller perfectly manages the stored energy to compensate for the solar energy variations. Additionally, the system response with the fuzzy controller is compared to that with the PI controller. The comparison shows that the fuzzy controller provides an improved response.

scholarly journals Development of an Efficient Tool for Solar Charging Station Management for Electric Vehicles

Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2979
Author(s):  
Simon Steinschaden ◽  
José Baptista
Keyword(s):  
Electric Vehicles ◽  
Energy Demand ◽  
Wide Spectrum ◽  
Clean Energy ◽  
Primary Energy ◽  
Transport Sector ◽  
Battery Storage ◽  
Charging Station ◽  
Input Parameters ◽  
Charging Stations

One important goal of the climate commitment in the European Union (EU) is to reduce primary energy demand in the transport sector and increase the use of renewables, since around 33% of primary energy is consumed in this sector. Therefore, the EU ordered its member states to raise the number of electric vehicles (EVs) within Europe. Consequently, the energy demand for electricity will rise as a function of the number of EVs. To avoid local grid overload and guarantee a higher percentage of clean energy, EV charging stations can be supported by a combined system of grid-connected photovoltaic modules and battery storage. In this paper, the focus lies on the feasibility and economic aspects of such systems. To provide an overview of the different e-charging station combinations, a support tool was modelled and developed, making it possible to size and manage EVs charging stations with only a few input parameters. Thanks to its easy handling, the tool suits a wide spectrum of users. Due to enhanced optional settings, this tool is suitable for detailed input parameters for professionals as well. Input categories are basically divided into the photovoltaic (PV) system, battery storage, the charging station itself, and investment analysis. The tool supports decisions for solar charging stations designed for different parking locations like offices, schools, and public and private places.

scholarly journals Dynamic-Area-Based Shortest-Path Algorithm for Intelligent Charging Guidance of Electric Vehicles

2020 ◽  
Vol 12 (18) ◽  
pp. 7343
Author(s):  
Junpeng Cai ◽  
Dewang Chen ◽  
Shixiong Jiang ◽  
Weijing Pan
Keyword(s):  
Electric Vehicles ◽  
Travel Demand ◽  
Smart Cities ◽  
Travel Distance ◽  
Dijkstra Algorithm ◽  
Shortest Path Algorithm ◽  
Promising Technique ◽  
Charging Station ◽  
Proposed Model ◽  
Charging Stations

With the increasing popularization and competition of electric vehicles (EVs), EV users often have anxiety on their trip to find better charging stations with less travel distance. An intelligent charging guidance strategy and two algorithms were proposed to alleviate this problem. First, based on the next destination of EV users’ trip, the strategy established a dynamic-area model to match charging stations with users’ travel demand intelligently. In the dynamic area, the Dijkstra algorithm is used to find the charging station with the shortest trip. Then, the area extension algorithm and the charging station attribution algorithm were developed to improve the robustness of the dynamic area. The two algorithms can automatically adjust the area size according to the number of charging stations in the dynamic area to reduce the number of nodes traversed by the Dijkstra algorithm. Finally, simulation examples were used to verify the effectiveness of the proposed model and algorithms. The results showed that the proposed intelligent charging guidance strategy can meet the travel demand of users. It is a promising technique in smart cities to find better travel trips with less travel distance and less computed time.

Sign in / Sign up

Export Citation Format

Share Document