scholarly journals Diagnosis of Blade Icing Using Multiple Intelligent Algorithms

Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2975
Author(s):  
Xiyun Yang ◽  
Tianze Ye ◽  
Qile Wang ◽  
Zhun Tao
Keyword(s):  
Neural Network ◽  
Random Forest ◽  
Wind Turbine ◽  
Wind Farm ◽  
Turbine Blades ◽  
Back Propagation ◽  
Active Power ◽  
K Nearest Neighbor ◽  
Wind Turbine Blades ◽  
Fully Connected

The icing problem of wind turbine blades in northern China has a serious impact on the normal and safe operation of the unit. In order to effectively predict the icing conditions of wind turbine blades, a deep fully connected neural network optimized by machine learning (ML) algorithms based on big data from the wind farm is proposed to diagnose the icing conditions of wind turbine blades. This study first uses the random forest model to reduce the features of the supervisory control and data acquisition (SCADA) data that affect blade icing, and then uses the K-nearest neighbor (KNN) algorithm to enhance the active power feature. The features after the random forest reduction and the active power mean square error (MSE) feature enhanced by the KNN algorithm are combined and used as the input of the fully connected neural network (FCNN) to perform and an empirical analysis for the diagnosis of blade icing. The simulation results show that the proposed model has better diagnostic accuracy than the ordinary back propagation (BP) neural network and other methods.

scholarly journals Analysis of Wind Turbine Aging through Operation Data Calibrated by LiDAR Measurement

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2319
Author(s):  
Hyun-Goo Kim ◽  
Jin-Young Kim
Keyword(s):  
Power Generation ◽  
Wind Speed ◽  
Wind Turbine ◽  
Wind Farm ◽  
Free Stream ◽  
Turbine Blades ◽  
Wind Farms ◽  
Lidar Measurement ◽  
Wind Turbine Blades ◽  
Wake Effect

This study analyzed the performance decline of wind turbine with age using the SCADA (Supervisory Control And Data Acquisition) data and the short-term in situ LiDAR (Light Detection and Ranging) measurements taken at the Shinan wind farm located on the coast of Bigeumdo Island in the southwestern sea of South Korea. Existing methods have generally attempted to estimate performance aging through long-term trend analysis of a normalized capacity factor in which wind speed variability is calibrated. However, this study proposes a new method using SCADA data for wind farms whose total operation period is short (less than a decade). That is, the trend of power output deficit between predicted and actual power generation was analyzed in order to estimate performance aging, wherein a theoretically predicted level of power generation was calculated by substituting a free stream wind speed projecting to a wind turbine into its power curve. To calibrate a distorted wind speed measurement in a nacelle anemometer caused by the wake effect resulting from the rotation of wind-turbine blades and the shape of the nacelle, the free stream wind speed was measured using LiDAR remote sensing as the reference data; and the nacelle transfer function, which converts nacelle wind speed into free stream wind speed, was derived. A four-year analysis of the Shinan wind farm showed that the rate of performance aging of the wind turbines was estimated to be −0.52%p/year.

scholarly journals PSO-BP Neural Network-Based Strain Prediction of Wind Turbine Blades

Materials ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 1889 ◽  
Author(s):  
Xin Liu ◽  
Zheng Liu ◽  
Zhongwei Liang ◽  
Shun-Peng Zhu ◽  
José A. F. O. Correia ◽  
...  
Keyword(s):  
Neural Network ◽  
Wind Turbine ◽  
Turbine Blade ◽  
Turbine Blades ◽  
Full Scale ◽  
Wind Turbine Blade ◽  
Blade Design ◽  
Wind Turbine Blades ◽  
Static Testing ◽  
Bpnn Model

The full-scale static testing of wind turbine blades is an effective means to verify the accuracy and rationality of the blade design, and it is an indispensable part in the blade certification process. In the full-scale static experiments, the strain of the wind turbine blade is related to the applied loads, loading positions, stiffness, deflection, and other factors. At present, researches focus on the analysis of blade failure causes, blade load-bearing capacity, and parameter measurement methods in addition to the correlation analysis between the strain and the applied loads primarily. However, they neglect the loading positions and blade displacements. The correlation among the strain and applied loads, loading positions, displacements, etc. is nonlinear; besides that, the number of design variables is numerous, and thus the calculation and prediction of the blade strain are quite complicated and difficult using traditional numerical methods. Moreover, in full-scale static testing, the number of measuring points and strain gauges are limited, so the test data have insufficient significance to the calibration of the blade design. This paper has performed a study on the new strain prediction method by introducing intelligent algorithms. Back propagation neural network (BPNN) improved by Particle Swarm Optimization (PSO) has significant advantages in dealing with non-linear fitting and multi-input parameters. Models based on BPNN improved by PSO (PSO-BPNN) have better robustness and accuracy. Based on the advantages of the neural network in dealing with complex problems, a strain-predictive PSO-BPNN model for full-scale static experiment of a certain wind turbine blade was established. In addition, the strain values for the unmeasured points were predicted. The accuracy of the PSO-BPNN prediction model was verified by comparing with the BPNN model and the simulation test. Both the applicability and usability of strain-predictive neural network models were verified by comparing the prediction results with simulation outcomes. The comparison results show that PSO-BPNN can be utilized to predict the strain of unmeasured points of wind turbine blades during static testing, and this provides more data for characteristic structural parameters calculation.

scholarly journals GA-BP Neural Network-Based Strain Prediction in Full-Scale Static Testing of Wind Turbine Blades

Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 1026 ◽  
Author(s):  
Zheng Liu ◽  
Xin Liu ◽  
Kan Wang ◽  
Zhongwei Liang ◽  
José A.F.O. Correia ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Turbine Blades ◽  
Back Propagation ◽  
Health Assessment ◽  
Prediction Method ◽  
Full Scale ◽  
Wind Turbine Blades ◽  
Static Test ◽  
Static Testing ◽  
Input Variables

This paper proposes a strain prediction method for wind turbine blades using genetic algorithm back propagation neural networks (GA-BPNNs) with applied loads, loading positions, and displacement as inputs, and the study can be used to provide more data for the wind turbine blades’ health assessment and life prediction. Among all parameters to be tested in full-scale static testing of wind turbine blades, strain is very important. The correlation between the blade strain and the applied loads, loading position, displacement, etc., is non-linear, and the number of input variables is too much, thus the calculation and prediction of the blade strain are very complex and difficult. Moreover, the number of measuring points on the blade is limited, so the full-scale blade static test cannot usually provide enough data and information for the improvement of the blade design. As a result of these concerns, this paper studies strain prediction methods for full-scale blade static testing by introducing GA-BPNN. The accuracy and usability of the GA-BPNN prediction model was verified by the comparison with BPNN model and the FEA results. The results show that BPNN can be effectively used to predict the strain of unmeasured points of wind turbine blades.

scholarly journals Editorial on Special Issue “Wind Turbine Power Optimization Technology”

Energies ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1796
Author(s):  
Francesco Castellani ◽  
Davide Astolfi
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
Power Optimization ◽  
Turbine Blades ◽  
Energy Yield ◽  
Optimization Approach ◽  
Special Issue ◽  
Wind Turbine Blades ◽  
Industry Practice

This Special Issue collects innovative contributions in the field of wind turbine optimization technology. The general motivation of the present Special Issue is given by the fact that there has recently been a considerable boost of the quest for wind turbine efficiency optimization in the academia and in the wind energy practitioners communities. The optimization can be focused on technology and operation of single turbine or a group of machines within a wind farm. This perspective is evidently multi-faced and the seven papers composing this Special Issue provide a representative picture of the most ground-breaking state of the art about the subject. Wind turbine power optimization means scientific research about the design of innovative aerodynamic solutions for wind turbine blades and of wind turbine single or collective control, especially for increasing rotor size and exploitation in offshore environment. It should be noticed that some recently developed aerodynamic and control solutions have become available in the industry practice and therefore an interesting line of development is the assessment of the actual impact of optimization technology for wind turbines operating in field: this calls for non-trivial data analysis and statistical methods. The optimization approach must be 360 degrees; for this reason also offshore resource should be addressed with the most up to date technologies such as floating wind turbines, in particular as regards support structures and platforms to be employed in ocean environment. Finally, wind turbine power optimization means as well improving wind farm efficiency through innovative uses of pre-existent control techniques: this is employed, for example, for active control of wake interactions in order to maximize the energy yield and minimize the fatigue loads.

Sign in / Sign up

Export Citation Format

Share Document