scholarly journals Pore Characteristics of Lacustrine Shale Oil Reservoir in the Cretaceous Qingshankou Formation of the Songliao Basin, NE China

Energies ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 2027 ◽  
Author(s):  
Xiaomeng Cao ◽  
Yuan Gao ◽  
Jingwei Cui ◽  
Shuangbiao Han ◽  
Lei Kang ◽  
...  
Keyword(s):  
Pore Structure ◽  
Fractal Dimensions ◽  
Nitrogen Adsorption ◽  
Songliao Basin ◽  
Oil Reservoir ◽  
Shale Oil ◽  
Pore Characteristics ◽  
Oil Accumulation ◽  
Average Pore ◽  
Lacustrine Shale

Shale oil is hosted in nanopores of organic-rich shales, so pore characteristics are significant for shale oil accumulation. Here we analyzed pore characteristics of 39 lacustrine shale samples of the Late Cretaceous Qingshankou Formation (K2qn) in the Songliao Basin, which is one of the main shale oil resource basins in China, using field emission-scanning electron microscopy (FE-SEM), and low-pressure nitrogen adsorption. We accomplished fractal analysis, correlation analysis using correlation matrix and multidimensional scaling (MDS), and prediction of fractal dimensions, which is the first time to predict pore fractal dimensions of shales. Interparticle pores are highly developed in K2qn. These shales have mesoporous nature and slit-shaped pores. Compared with the second and third members (K2qn2,3), the first member of the Qingshankou Formation (K2qn1) has a larger average pore diameter, much smaller surface area, fewer micropores, simpler pore structure and surface indicated by smaller fractal dimensions. In terms of pore characteristics, K2qn1 is better than K2qn2,3 as a shale oil reservoir. When compared with marine Bakken Formation shales, lacustrine shales of the Qingshankou Formation have similar complexity of pore structure, but much rougher pore surface. This research can lead to an improved understanding of the pore system of lacustrine shales.

Pore characteristics of lacustrine mudstones from the Cretaceous Qingshankou Formation, Songliao Basin

2017 ◽  
Vol 5 (3) ◽  
pp. T373-T386 ◽  
Author(s):  
Min Wang ◽  
Shuangfang Lu ◽  
Wenbiao Huang ◽  
Wei Liu
Keyword(s):  
Organic Matter ◽  
Source Rock ◽  
Gas Adsorption ◽  
Total Pore Volume ◽  
Songliao Basin ◽  
Hydrocarbon Generation ◽  
Shale Oil ◽  
Pore Characteristics ◽  
Oil Accumulation ◽  
Average Pore

Cretaceous Qingshankou ([Formula: see text]) mudstone of lacustrine origin is the major source rock for conventional hydrocarbon currently being produced in the Daqing and Jilin oilfields of the Songliao Basin, which is one of the largest continental basins in the world. Therefore, elucidating the geochemical and petrological characteristics of the [Formula: see text] mudstone is important to help determine its quality as an economically viable source for shale oil production. In our study, eight dark mudstone core samples from the [Formula: see text] formation were subjected to total organic carbon (TOC), Rock-Eval pyrolysis, X-ray diffraction, scanning electron microscopy (SEM), field emission SEM (FE-SEM), and low-pressure [Formula: see text] gas adsorption (LPGA-[Formula: see text]) experiments. Geochemical and petrological analysis results indicated the presence of a high TOC content, which originated mainly from alginate and some plant-derived organic matter, whereas bitumen was frequently present in mudstones with thermal maturity in the oil-generation stage. The [Formula: see text] mudstones were comprised mainly of clay minerals, followed by quartz, feldspar, and carbonates. The LPGA-[Formula: see text] experiments revealed the presence of nanoscale slit-shaped pores, and the contribution from mesopores to the total pore volume was the highest in most of the samples. The average pore diameters (APDs) of the mudstone samples were all smaller than 20 nm (4.36–17.79 nm). We determined that there was a clear positive correlation between the APD and the free oil content; however, there were no clear correlations between the APDs and the quartz, carbonate, and TOC contents. FEM studies revealed the presence of intergranular pores with widths of approximately 10 μm, micron-level autogenetic organic matter pores within spores, organic matter pores caused by the hydrocarbon generation effect within organic matter or clay-organic complexes, and intraparticle pores within clays or pyrite framboids. The microlevel intergranular pores might play an important role in shale oil accumulation from source rock of lacustrine origin.

scholarly journals Pore Structure and Fractal Character of Lacustrine Oil-Bearing Shale from the Dongying Sag, Bohai Bay Basin, China

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-19
Author(s):  
Pengfei Zhang ◽  
Shuangfang Lu ◽  
Zhiping Zeng ◽  
Xiangchun Chang ◽  
Junqian Li ◽  
...  
Keyword(s):  
Pore Structure ◽  
Fractal Dimensions ◽  
Nitrogen Adsorption ◽  
Bohai Bay ◽  
Shale Oil ◽  
Bohai Bay Basin ◽  
Average Pore ◽  
Dongying Sag ◽  
Shahejie Formation ◽  
Fractal Character

To better understand the pore structure and fractal character of lacustrine shales and their influence on liquid hydrocarbon occurrences, in this study, a total of 29 lacustrine oil-bearing shale samples collected from the Shahejie Formation in the Dongying Sag, Bohai Bay Basin, were investigated based on nitrogen adsorption (NGA) analysis combined with TOC, Rock-Eval pyrolysis, X-ray diffraction (XRD), and field emission-scanning electron microscopy (FE-SEM) experiments. The relationships among the compositions (TOC, minerals, and oil content), pore structures, and fractal dimensions of the lacustrine shale samples were discussed. The results showed that the adsorption and fractal characteristics of lacustrine oil-bearing shales differ at relative pressures of 0-0.1 and 0.5-1. Two corresponding fractal dimensions D 1 and D 2 were determined by the FHH model according to the nitrogen adsorption branches. Specifically, D 1 varies from 2.4292 to 2.6109 (mean 2.5245), and D 2 varies between 2.4680 and 2.8535 (mean 2.6889). The specific surface area (SSA) ranges from 1.512 m2/g to 34.002 m2/g, with an average of 13.656 m2/g, the total pore volume is between 6.0 × 10-3 cm3/g and 48.4 × 10-3 cm3/g (mean 24.5 × 10-3 cm3/g), and the average pore diameter is in the range of 4.22 nm to 19.57 nm (mean 9.35 nm). Both D 1 and D 2 increase with increasing SSA and increase with decreasing average pore diameters but have no correlation with pore volume. Moreover, D 1 and D 2 exhibit positive relationships with clay minerals and negative correlations with carbonate minerals (calcite and dolomite). The relationship between fractal dimensions ( D 1 and D 2 ) and TOC contents is expressed as a U-shaped curve, characterized by the minimum D values at approximately 3% TOC. The shale oil content is controlled by the pore structures and fractal dimensions, and lacustrine shales with lower SSAs and smaller fractal dimensions would have more free oil. Therefore, lacustrine shales in the oil window with TOC contents ranging from 2% to 4% are probably the preferred shale oil exploration target in the Shahejie Formation, Dongying Sag, Bohai Bay Basin. The results indicate that fractal analysis can provide insight into the pore structure characteristics and oil storage capacity of lacustrine shales.

Nano/Micro Pore Structure and Fractal Characteristics of Baliancheng Coalfield in Hunchun Basin

2021 ◽  
Vol 21 (1) ◽  
pp. 682-692
Author(s):  
Youzhi Wang ◽  
Cui Mao
Keyword(s):  
Fractal Dimension ◽  
Specific Surface ◽  
Pore Structure ◽  
Surface Area ◽  
Specific Surface Area ◽  
Pore Diameter ◽  
Fractal Dimensions ◽  
Nitrogen Adsorption ◽  
Average Pore ◽  
Coal Reservoir

The pore structure characteristic is an important index to measure and evaluate the storage capacity and fracturing coal reservoir. The coal of Baliancheng coalfield in Hunchun Basin was selected for experiments including low temperature nitrogen adsorption method, Argon Ion milling Scanning Electron Microscopy (Ar-SEM), Nuclear Magnetic Resonance (NMR), X-ray diffraction method, quantitative mineral clay analysis method. The pore structure of coal was quantitatively characterized by means of fractal theory. Meanwhile, the influences of pores fractal dimension were discussed with experiment data. The results show that the organic pores in Baliancheng coalfield are mainly plant tissue pores, interparticle pores and gas pores, and the mineral pores are corrosion pores and clay mineral pores. There are mainly slit pore and wedge-shaped pore in curve I of Low temperature nitrogen adsorption. There are ink pores in curve II with characteristics of a large specific surface area and average pore diameter. The two peaks of NMR T2 spectrum indicate that the adsorption pores are relatively developed and their connectivity is poor. The three peaks show the seepage pores and cracks well developed, which are beneficial to improve the porosity and permeability of coal reservoir. When the pore diameter is 2–100 nm, the fractal dimensions D1 and D2 obtained by nitrogen adsorption experiment. there are positive correlations between water content and specific surface area and surface fractal dimension D1, The fractal dimension D2 was positively and negatively correlated with ash content and average pore diameters respectively. The fractal dimensions DN1 and DN2 were obtained by using the NMR in the range of 0.1 μm˜10 μm. DN1 are positively correlated with specific surface area of adsorption pores. DN2 are positively correlated volume of seepage pores. The fractal dimension DM and dissolution hole fractal dimension Dc were calculated by SEM image method, respectively controlled by clay mineral and feldspar content. There is a remarkable positive correlation between D1 and DN1 and Langmuir volume of coal, so fractal dimension can effectively quantify the adsorption capacity of coal.

scholarly journals Nanoscale pore characteristics and fractal characteristics of organic-rich shale: An example from the lower Cambrian Niutitang Formation in the Fenggang block in northern Guizhou Province, South China

2018 ◽  
Vol 37 (1) ◽  
pp. 273-295 ◽  
Author(s):  
Yang Gu ◽  
Wenlong Ding ◽  
Min Yin ◽  
Baocheng Jiao ◽  
Siyu Shi ◽  
...  
Keyword(s):  
Organic Carbon ◽  
Pore Structure ◽  
Carbon Content ◽  
South China ◽  
Fractal Dimensions ◽  
Nitrogen Adsorption ◽  
Organic Carbon Content ◽  
Structure Parameters ◽  
Pore Characteristics ◽  
Fractal Characteristics

Organic-rich marine shale in South China has great potential for gas generation, and the pore structure has a considerable influence on the enrichment of shale gas. The nanoscale pore characteristics and fractal characteristics of the Niutitang shales in the Fenggang block were studied by means of methane adsorption and low-pressure nitrogen adsorption experiments, porosity and permeability tests, X-ray diffraction analyses, organic geochemical analyses, and field emission scanning electron microscopy. The fractal geometry of the pore structure was assessed, and the factors influencing the pore structure were determined. We used a fractal Frenkel–Halsey–Hill-based method to obtain the fractal dimensions D1 and D2 by nitrogen adsorption at relative pressures of 0–0.5 and 0.5–1, respectively. The relationships between the shale pore structure parameters and the fractal dimensions, the mineral composition, the total organic carbon content, and the pore structure parameters of shale are discussed. In addition, the significance of D1 and D2 and the implications of the fractal dimension for the adsorption capacity of shale are investigated. The results show that the two fractal dimensions are positively correlated with total organic carbon content and specific surface area, negatively correlated with quartz content and average pore diameter, but have a weak relationship with clay mineral content and total pore volume. The Niutitang shale samples are dominated by mesopores, and the pore structure is complicated. The results presented here indicate that fractal analyses represent an effective method of characterizing the complexity of pore structure.

Pore structure and controlling factors of dolomite-bearing high-salinity shale reservoir in Qianjiang Formation, Jianghan Basin, China

2020 ◽  
Vol 8 (4) ◽  
pp. T675-T686
Author(s):  
Tong Zhou ◽  
Jianzheng Su ◽  
Shichao Fan ◽  
Zhaofeng Li ◽  
Xiaoxue Liu ◽  
...  
Keyword(s):  
Pore Structure ◽  
Pore Volume ◽  
High Salinity ◽  
Total Pore Volume ◽  
Oil Reservoir ◽  
Shale Oil ◽  
Average Pore ◽  
Salt Minerals ◽  
Shale Oil Reservoirs ◽  
Mercury Injection Capillary Pressure

High-salinity shale is a unique and promising shale-oil reservoir in continental basins. We have collected representative samples from different lithologies from wells in the Qianjiang Depression to test the pore structure and basic character from prospective high-salinity oil-bearing shales. We conducted field emission scanning electron microscopy and X-ray diffraction analyses to study the high-salinity shale pore morphology and composition, respectively. We used mercury injection capillary pressure to understand the high-salinity shale macropore distribution, and we used low-pressure nitrogen (N2) adsorption to study the mesopore distribution. The results show that the high-salinity shale-oil reservoir mainly is composed of carbonate (dolomite and calcite), clay, and saline minerals (anhydrite, glauberite, and halite). Many intergranular pores were developed in the high-salinity shale. The mesopores and macropores both were developed well in argillaceous dolomite. The average pore volume of macropores is 0.0588 ml/g, which accounts for approximately 59% of the total pore volume. Therefore, in the high-salinity shale-oil reservoirs that we tested, macropores were more important than other pores. The symbiosis of dolomite and calcite improved the porosity of the high-salinity shale-oil reservoir, and the salt minerals increased the pore complexity.

scholarly journals Fractal Characterization of Nanopore Structure in Shale, Tight Sandstone and Mudstone from the Ordos Basin of China Using Nitrogen Adsorption

Energies ◽  
2019 ◽  
Vol 12 (4) ◽  
pp. 583 ◽  
Author(s):  
Xiaohong Li ◽  
Zhiyong Gao ◽  
Siyi Fang ◽  
Chao Ren ◽  
Kun Yang ◽  
...  
Keyword(s):  
Pore Structure ◽  
Pressure Range ◽  
Ordos Basin ◽  
Fractal Dimensions ◽  
Nitrogen Adsorption ◽  
Relative Pressure ◽  
Tight Sandstone ◽  
Porosity And Permeability ◽  
The Ordos Basin ◽  
Nanopore Structure

The characteristics of the nanopore structure in shale, tight sandstone and mudstone from the Ordos Basin of China were investigated by X-ray diffraction (XRD) analysis, porosity and permeability tests and low-pressure nitrogen adsorption experiments. Fractal dimensions D1 and D2 were determined from the low relative pressure range (0 < P/P0 < 0.4) and the high relative pressure range (0.4 < P/P0 < 1) of nitrogen adsorption data, respectively, using the Frenkel–Halsey–Hill (FHH) model. Relationships between pore structure parameters, mineral compositions and fractal dimensions were investigated. According to the International Union of Pure and Applied Chemistry (IUPAC) isotherm classification standard, the morphologies of the nitrogen adsorption curves of these 14 samples belong to the H2 and H3 types. Relationships among average pore diameter, Brunner-Emmet-Teller (BET) specific surface area, pore volume, porosity and permeability have been discussed. The heterogeneities of shale nanopore structures were verified, and nanopore size mainly concentrates under 30 nm. The average fractal dimension D1 of all the samples is 2.1187, varying from 1.1755 to 2.6122, and the average fractal dimension D2 is 2.4645, with the range from 2.2144 to 2.7362. Compared with D1, D2 has stronger relationships with pore structure parameters, and can be used for analyzing pore structure characteristics.

scholarly journals The Impacts of Matrix Compositions on Nanopore Structure and Fractal Characteristics of Lacustrine Shales from the Changling Fault Depression, Songliao Basin, China

Minerals ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 127 ◽  
Author(s):  
Zhuo Li ◽  
Zhikai Liang ◽  
Zhenxue Jiang ◽  
Fenglin Gao ◽  
Yinghan Zhang ◽  
...  
Keyword(s):  
Fractal Dimension ◽  
Pore Structure ◽  
Fractal Dimensions ◽  
Organic Medium ◽  
Songliao Basin ◽  
Sem Images ◽  
Fractal Characteristics ◽  
Inorganic Mineral ◽  
Nanopore Structure ◽  
High Fractal Dimension

The Lower Cretaceous Shahezi shales are the targets for lacustrine shale gas exploration in Changling Fault Depression (CFD), Southern Songliao Basin. In this study, the Shahezi shales were investigated to further understand the impacts of rock compositions, including organic matters and minerals on pore structure and fractal characteristics. An integrated experiment procedure, including total organic carbon (TOC) content, X-ray diffraction (XRD), field emission-scanning electron microscope (FE-SEM), low pressure nitrogen physisorption (LPNP), and mercury intrusion capillary pressure (MICP), was conducted. Seven lithofacies can be identified according to on a mineralogy-based classification scheme for shales. Inorganic mineral hosted pores are the most abundant pore type, while relatively few organic matter (OM) pores are observed in FE-SEM images of the Shahezi shales. Multimodal pore size distribution characteristics were shown in pore width ranges of 0.5–0.9 nm, 3–6 nm, and 10–40 nm. The primary controlling factors for pore structure in Shahezi shales are clay minerals rather than OM. Organic-medium mixed shale (OMMS) has the highest total pore volumes (0.0353 mL/g), followed by organic-rich mixed shale (ORMS) (0.02369 mL/g), while the organic-poor shale (OPS) has the lowest pore volumes of 0.0122 mL/g. Fractal dimensions D1 and D2 (at relative pressures of 0–0.5 and 0.5–1 of LPNP isotherms) were obtained using the Frenkel–Halsey–Hill (FHH) method, with D1 ranging from 2.0336 to 2.5957, and D2 between 2.5779 and 2.8821. Fractal dimensions are associated with specific lithofacies, because each lithofacies has a distinctive composition. Organic-medium argillaceous shale (OMAS), rich in clay, have comparatively high fractal dimension D1. In addition, organic-medium argillaceous shale (ORAS), rich in TOC, have comparatively high fractal dimension D2. OPS shale contains more siliceous and less TOC, with the lowest D1 and D2. Factor analysis indicates that clay contents is the most significant factor controlling the fractal dimensions of the lacustrine Shahezi shale.

scholarly journals Experimental Study on Pore Characteristics and Fractal Dimension Calculation of Pore Structure of Aerated Concrete Block

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Jun Fu ◽  
Yue Yu
Keyword(s):  
Fractal Dimension ◽  
Pore Structure ◽  
Fractal Theory ◽  
Concrete Block ◽  
Average Diameter ◽  
Pore Characteristics ◽  
Average Pore ◽  
X Ray ◽  
Matlab Program ◽  
Aerated Concrete

It is important to control and predict the macroscopic properties through pore structure parameters of cement-based materials. Microscopic pore structure of concrete has many characteristics, such as sizes and disordered distribution. It is necessary to use fractal theory to describe the pore structure of concrete. In order to establish the relationship between the pore structure characteristics of aerated concrete and porosity, shape factor, pore superficial area, average pore diameter, and average diameter, the fractal dimension of the pore structure was used to evaluate the pore structure characteristics of aerated concrete. The X-ray computed tomography (CT) images of the aerated concrete block pore structure were obtained by using the XTH320 series X-ray three-dimensional microscope. The pore characteristics of aerated concrete block were studied according to Image-Pro Plus (IPP). Based on the research of the fractal dimension measurement methods, the proposed MATLAB program automatically determined the fractal dimension of the aerated concrete block pore structure images. The research results indicated that the small pores (20 μm∼60 μm) of aerated concrete block account for a large percentage compared with the large pores (60 μm∼400 μm or more) from pore diameter distribution and the pore structure of aerated concrete block has obvious fractal features and the fractal dimension of aerated concrete block pore structure images were calculated to be in the range of 1.775–1.805. The pore fractal dimension has a strong correlation with the pore fractal characteristics of aerated concrete blocks. The fractal dimension of the pore structure linearly increases with porosity, shape factor, and pore surface area. The fractal dimension of the pore structure decreases with the average pore size and average diameter. Thus, the fractal dimension of the pore structure that is calculated by the MATLAB program based on fractal theory can be assumed as the integrative evaluation index for evaluating the pore structure characteristic of aerated concrete block.

Sign in / Sign up

Export Citation Format

Share Document