scholarly journals A Study of Temperature-Dependent Hysteresis Curves for a Magnetocaloric Composite Based on La(Fe, Mn, Si)13-H Type Alloys

Energies ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1491 ◽  
Author(s):  
Roman Gozdur ◽  
Piotr Gębara ◽  
Krzysztof Chwastek
Keyword(s):  
Magnetic Properties ◽  
Magnetic Hysteresis ◽  
Hysteresis Loops ◽  
Effect Of Temperature ◽  
Temperature Dependent ◽  
Hysteresis Curves ◽  
Magnetic Hysteresis Loops ◽  
Set Up ◽  
Curie Temperatures

In the present paper, the effect of temperature on the shape of magnetic hysteresis loops for a magnetocaloric composite core was studied. The composite core, based on La(Fe, Mn, Si)13-H, was set up using three component disks with different Curie temperatures. The magnetic properties of the components and the outcome composite core were determined using a self-developed measurement setup. For the description of hysteresis loops, the phenomenological T(x) model was used. The presented methodology might be useful for the designers of magnetic active regenerators.

MAGNETIC PROPERTIES OF THE HIGH Tc SUPERCONDUCTORS BiSrCaCuO AND TlBaCaCuO

1989 ◽  
Vol 03 (01) ◽  
pp. 77-85 ◽  
Author(s):  
Y. D. DAI ◽  
C. LIN ◽  
W. B. ZHANG ◽  
S. Q. FENG ◽  
X. ZHU ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Flux Pinning ◽  
Magnetic Hysteresis ◽  
Hysteresis Loops ◽  
High Tc Superconductors ◽  
Magnetic Current ◽  
High Tc ◽  
Bean Model ◽  
Current Densities ◽  
Magnetic Hysteresis Loops

Magnetic properties of the high T c superconductors BiSrCaCuO and TlBaCaCuO were investigated systematically. Magnetic current densities were calculated from magnetic hysteresis loops of bulk and powdered samples by Bean model. The results showed that flux pinning in these materials is much weaker than that in YBaCuO.

Thermal effects on magnetic hysteresis modeling

2012 ◽  
Vol 61 (1) ◽  
pp. 77-84 ◽  
Author(s):  
A. Ladjimi ◽  
M. Mékideche ◽  
A. Babouri
Keyword(s):  
Thermal Effects ◽  
Magnetic Hysteresis ◽  
Hysteresis Loops ◽  
Magnetic Hysteresis Loop ◽  
Effect Of Temperature ◽  
Temperature Dependent ◽  
Ferrite Material ◽  
Hysteresis Modeling ◽  
Dependent Model ◽  
Temperature Dependent Model

Thermal effects on magnetic hysteresis modelingA temperature dependent model is necessary for the generation of hysteresis loops of ferromagnetic materials. In this study, a physical model based on the Jiles-Atherton model has been developed to study the effect of temperature on the magnetic hysteresis loop. The thermal effects were included through a model of behavior depending on the temperature parametersMsandkof the Jiles-Atherton model. The temperature-dependent Jiles-Atherton model was validated through measurements made on ferrite material (3F3). The results have been found to be in good agreement with the model.

scholarly journals Ferroelectric and Magnetic Properties of Hot-Pressed BiFeO3-PVDF Composite Films

2011 ◽  
Vol 2011 ◽  
pp. 1-5 ◽  
Author(s):  
Annapu V. Reddy ◽  
K. C. Sekhar ◽  
Navneet Dabra ◽  
A. Nautiyal ◽  
Jasbir S. Hundal ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Coercive Field ◽  
Polyvinylidene Fluoride ◽  
Room Temperature ◽  
Magnetic Hysteresis ◽  
Composite Films ◽  
Hysteresis Loops ◽  
Liquid Phase Sintering ◽  
Magnetic Hysteresis Loops ◽  
Ferroelectric Hysteresis

The ferroelectric and magnetic properties of hot-pressed BiFeO3- (BFO) polyvinylidene fluoride (PVDF) composite films have been studied. The BiFeO3 (BFO) ceramics have been synthesized by a rapid liquid phase sintering technique. The X-ray diffraction (XRD) studies revealed that the impure phase observed in pure BFO ceramics was significantly reduced in the composite films. The presence of both ferroelectric and magnetic hysteresis loops confirms the multiferroic nature of the composite films at room temperature. A well-saturated ferroelectric hysteresis loop with a remanent polarization (Pr)∼4.8 μC-cm-2 and coercive field (Ec)∼1.55 kV/cm has been observed in composite thin films at room temperature. The magnetic hysteresis loops were traced at room temperature with SQUID. The remanent magnetization (Mr)∼3.0×10−3 emu/gm and coercive field (Hc)∼0.99 kOe was observed in the composite film. The magnetic polarization of the composite films has found to be enhanced as compared to pure BFO and correlated to reduction in BFO impure peak intensity.

Magnetic properties of a tri-decorated graphene structure: Monte Carlo study

2016 ◽  
Vol 30 (32) ◽  
pp. 1650233
Author(s):  
A. Jabar ◽  
N. Tahiri ◽  
L. Bahmad ◽  
A. Benyoussef
Keyword(s):  
Monte Carlo ◽  
Magnetic Properties ◽  
Phase Diagrams ◽  
Ground State ◽  
Magnetic Hysteresis ◽  
Hysteresis Loops ◽  
Monte Carlo Study ◽  
Magnetic Hysteresis Loops ◽  
Reduced Temperature ◽  
Good Agreement

In this paper, we study the magnetic properties of a tri-decorated [Formula: see text] graphene structure using Monte Carlo simulations (MCS). Indeed, we first elaborate the ground state phase diagrams and then, we found that from [Formula: see text] phases, the only stable configurations are: [Formula: see text], [Formula: see text], [Formula: see text], [Formula: see text], [Formula: see text], [Formula: see text], [Formula: see text], [Formula: see text], [Formula: see text], [Formula: see text], [Formula: see text] and [Formula: see text]. For low reduced temperature values, the partial magnetizations are found to be in good agreement with the corresponding ground state phase diagrams. The corresponding partial susceptibilities show a notable peak around the reduced temperature value 2.0 in the absence of the external magnetic field [Formula: see text] and crystal field [Formula: see text]. To complete this study, we present and discuss the magnetic hysteresis loops.

Influence of Annealing on the Surface Topography and Magnetic Properties of Thin Films of the FINEMET-Type Alloy

2015 ◽  
Vol 233-234 ◽  
pp. 699-704 ◽  
Author(s):  
Evgeniya Mikhalitsyna ◽  
Vasiliy Kataev ◽  
Pavel Geydt ◽  
Vladimir Lepalovsky ◽  
Erkki Lähderanta
Keyword(s):  
Thin Films ◽  
Magnetic Properties ◽  
Scanning Probe Microscopy ◽  
Annealing Temperature ◽  
Magnetic Hysteresis ◽  
Hysteresis Loops ◽  
Scanning Probe ◽  
Type Alloy ◽  
Treatment Conditions ◽  
Magnetic Hysteresis Loops

Surface structure and magnetic properties of thin films of the FINEMET-type alloy modificated by Mo (FeCuNbSiBMo) were studied in the aim of establishing of their dependence on heat treatment conditions. The thicknesses of the films were varied from 10 to 800 nm. Dependence of the microstructure of the films surface on the annealing temperature was analyzed using scanning probe microscopy. Parameters of the topography features were estimated as a function of the films thickness and annealing temperature. Magnetic hysteresis loops were measured using vibrating sample magnetometer and discussed in the focus of surface and thickness influences.

Structure and Magnetic Properties of Ti-Co Co-Cubstituted Barium Hexaferrite

2014 ◽  
Vol 602-603 ◽  
pp. 951-955
Author(s):  
Zheng Qiang Zhang ◽  
Qing Lin Xia ◽  
Guang Hua Guo ◽  
Hai Fa Zhang ◽  
Cun Jun Dong
Keyword(s):  
Magnetic Properties ◽  
Substitution Rate ◽  
Magnetic Measurement ◽  
Magnetic Hysteresis ◽  
Hysteresis Loops ◽  
Barium Hexaferrite ◽  
Particle Structure ◽  
Magnetic Hysteresis Loops ◽  
Xrd Patterns ◽  
Citrate Precursor

Polycrystalline Ti-Co co-substituted M-type ferrites Ba (TiCo)xFe12-2xO19 (x=0.25,0.5, 0.75, 1.0 ) samples were prepared by the citrate precursor method. The particle structure and morphology of the products were characterized by X-ray powder diffraction (XRD) and Field Emission Scanning Electron Microscope (FE-SEM). The effects of the substitution rate on the magnetic properties of samples were analysed by magnetic measurement with the Vibrating Sample Magnetometer (VSM) of Physical Properties Measurement System (PPMS). The XRD patterns show that only one type of crystalline phase can be detected and the substitution did not change the crystal structure. The SEM micrographs of Ba (TiCo)xFe12-2xO19 calcined at 450 °C for 5h, and then 950°C for 5h show that the M-type ferrite particles were homogeneously shaped and the grain sizes had no obvious differences when the substitution rate changed. The magnetic hysteresis loops illustrate that the coercivity (Hc) decreased rapidly with the increasing of Ti-Co substitution, while the saturation magnetization (Ms) changed slowly.

Correlation of Cooling Conditions with the Shape of Hysteresis Loops in Air Cooled and Quenched Axis Shaft

2015 ◽  
Vol 644 ◽  
pp. 223-226
Author(s):  
Angelos Tsoutsias
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Magnetic Properties ◽  
Magnetic Hysteresis ◽  
Hysteresis Loops ◽  
Cooling Conditions ◽  
Magnetic Hysteresis Loops ◽  
Nondestructive Characterization ◽  
Scanning Electron

The present paper investigates the utilization of the magnetic hysteresis loops for the nondestructive characterization of annealed axis shaft samples. The resulting magnetic properties were further evaluated by examining the microstructure of the annealed samples by using scanning electron microscopy.

Structure and Magnetic Properties of Ga Substituted Ni-Ferrites

2013 ◽  
Vol 446-447 ◽  
pp. 68-72
Author(s):  
Ahmad Amirabadizadeh ◽  
Zobedeh Momeni Larimi ◽  
Saeideh Eghbali
Keyword(s):  
Magnetic Properties ◽  
Single Phase ◽  
Sol Gel ◽  
Magnetic Hysteresis ◽  
Hysteresis Loops ◽  
X Ray Diffraction ◽  
Auto Ignition ◽  
Transmission Electron ◽  
Magnetic Hysteresis Loops ◽  
Ga Content

Nanocrystalline Ga doped nickel ferrite [(NiFe2-xGaxO4 (x=0.0, 0.1, 0.3, 0.5 and 0.7)] powders have been synthesized by sol-gel auto-ignition method and the effect of non-magnetic gadillum content on the nanosize particles and magnetic properties has been studied. The X-ray diffraction (XRD) revealed that the powders obtained are single phase with spinel structure. The calculated grain size from XRD data have been verified using transmission electron microscopy (TEM). TEM photograph shows that the powders consist of nanometer sized grain. The size of nanoparticles decreases as the non magnetic Ga content increases. Magnetic hysteresis loops were measured at room temperature with maximum applied magnetic field of 20 KOe. As Ga content increases, the measured magnetic hysteresis curves became border and saturation magnetization (MS) increased up to x= 0.3 and further increase of x leads the magnetization to decrease. The results are explained according to the assumed cation distribution.

Dielectric and magnetic properties in Ta-substituted BiFeO3 ceramics

2007 ◽  
Vol 22 (12) ◽  
pp. 3397-3403 ◽  
Author(s):  
Youn-Ki Jun ◽  
Sung Bo Lee ◽  
Miyoung Kim ◽  
Seong-Hyeon Hong ◽  
Jae Wook Kim ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Magnetic Properties ◽  
Room Temperature ◽  
Magnetic Hysteresis ◽  
Hysteresis Loops ◽  
High Resistivity ◽  
Magnetic Dipoles ◽  
Low Dielectric ◽  
Polycrystalline Ceramics ◽  
Magnetic Hysteresis Loops

The dielectric and magnetic properties were investigated in Ta-substituted BiFeO3 polycrystalline ceramics synthesized by a solid-state reaction. The Ta substitution decreased the grain size by two orders of magnitude compared with that of unsubstituted ceramics and increased the electrical resistivity by 6 orders of magnitude. The high resistivity and low dielectric loss allowed the dielectric constant to be determined at room temperature. The magnetic hysteresis loops were observed in the Ta-substituted BiFeO3, and the appearance of ferromagnetism was closely associated with the distortion of the oxygen octahedra by the Ta substitution. The coupling between the electric and magnetic dipoles was examined by determining the changes of the dielectric constant with the external magnetic field.

Magnetic Properties of Nano Zerovalent Iron Particles Coated with Biopolymers

2014 ◽  
Vol 912-914 ◽  
pp. 32-35 ◽  
Author(s):  
Ding Qi Xue
Keyword(s):  
Magnetic Properties ◽  
Magnetic Hysteresis ◽  
Hysteresis Loops ◽  
Magnetic Interaction ◽  
Zerovalent Iron ◽  
Phase Method ◽  
Zero Field ◽  
Iron Particles ◽  
Liquid Phase Method ◽  
Magnetic Hysteresis Loops

nanozerovalent iron particles coated with biopolymer nanoskin were prepared by liquid phase method. For a period of time, the remaining xanthan layer can prevent oxidation of nanoiron in air. The goal of this study is to demonstrate that magnetic properties of magnetic fluid which suspend nanoiron particles coated with xanthan in xanthan/guar fluid. Magnetic hysteresis loops were measured at room temperatures and field-cooled / zero-field-cooled magnetization curves were obtained at low temperature by a vibrating sample magnetometer. The results interpret that biopolymer nanoskin did not strongly weaken the magnetic interaction between nanoiron particles.

Sign in / Sign up

Export Citation Format

Share Document